CREATING "MASTER" PROJECT WITH PREMIERE ELEMENTS (PRE)
I am creating a new thread following up on earlier questions re Premiere Elements 8.0 (PRE).
I have created (authored?) 14 projects with music using PRE and burned each on 1 DVD. I did not save to a folder, but went to Share and Burn Disc. They show well on TV from an ordinary DVD player. Now I must combine these projects into 3 "master" projects on 3 DVDs and burn multiple copies to send to former members of my Boy Scout Troop. See the chart below. I thought (silly me) that I could do that straightforwardly with PRE. I am going to start following suggestions from Bill Hunt and Nealeh.
Titles of Existing “Premiere Elements 8.0” “Sub” Projects
All Burned Individually to NTSC DVD Standard
Each Project Now on Separate DVD
No. of Slides
Running Time
Min:Sec
Desired
New Project for DVD Players
Introduction & Dedication
21
5:30
DVD NO. 1
417 Slides
69:46
With Main Menu Marker for Each SubProject
1974 Canoe Trip
60
9:12
1975 Canoe Trip
105
16:41
1976 Canoe Trip
24
5:12
1977 Canoe Trip
16
3:00
1978 Canoe Trip
89
14:02
1979 Canoe Trip
15
2:15
1982 Canoe Trip
87
13:54
1973 Jamboree
62
10:42
DVD NO. 2
247 Slides
34:32
With Main Menu Marker for Each SubProject
1981 Jamboree
124
15:11
1985-2001 Jamboree
61
8:39
Troop 184 Camping & Hiking
190
34:28
DVD NO. 3
443 Slides
78:12
With Main Menu Marker for Each SubProject
Other Activities 1972--1985
65
10:19
Troop 184 Family Camping 1974--2006
188
33:25
Total Slides
1,107
182:30
182:30
Hey, those ain't "newbie" questions. The first one gets posted to the Forum Comments forum weekly. The second one, well I should have posted my normal detail, but got lazy - mea culpa, mea culpa.
1.) This ARTICLE should step you through the processes with the e-mails. If you have any questions, let us know. There are several places, where e-mail notification can be turned ON and OFF. Some are global, and some are specific to threads.*
2.) Ah, the ImgBurn site. The top 2/3 are all ads. Hey, it's great free software, so who can blame 'em? Scroll down to where the page has the various versions and what they addressed. There is a Download button there (well below those ads). That is what you want. Normally, I mention the scrolling way down page, but you caught me here.
Good luck,
Hunt
* Going back a few months, while trying to help another user on the Forum Comments forum, I got hit with a global change in my e-mail settings. I got about 1,000/day, for every forum that I participate in - think 1,000 x PS, PrPRo, Encore, InDesign, Illustrator, Audition, PrE and all of their sub-fora! Fortunately, it only took about 3 days for Adobe to get that fixed.
Similar Messages
-
Editing Premiere cs4 project with premiere elements 9?
Can I open a premiere cs4 project with premiere elements 9 to edit it.
Thanks in advanceYou are most welcome, though it's probably not the answer that you wanted.
There are just so very many differences between the two programs. As a test recently, I took a PREL from PrE 8, IIRC, and it would not even open in my PrPro 2.0, like my simple PrE 4 Projects would. That PrE 8 test Project was also simple, with no Themes, or Instant Movies - just Cuts and some common Transitions, no Effects. Just too different to Open.
Good luck,
Hunt -
Open a premiere cs4 project with premiere elements 9
Can I open a premiere cs4 project with premiere elements 9 to edit it.
Thanks in advanceI'm going to throw out a somewhat educated guess and say no. Despite the similar monikers, Premiere Elements and Premiere Pro are two different programs.
-
Merging two projects with Premiere elements 12.
Hello,
On my computer (windows 7) i have different directories with movie-fragments. From each directory i made a movieproject. It took a long time to trim everything. Now i have one project from 1,5 hours and another from 20 minutes. I would like to put the two projects together and then cut it into two projects. I was suprised that i could not do that. I could not copy the movie with titles in one project and copy it to the other project. Also i could not find any way to import one movie into the other. Very strange. I would think that this is a basic function the program should have.
I found out that i can work of course with the Project Asset and import the moviefragments again, but then i have to trim everything again.
I could also export one movie as for example AVI and then insert it with the Project Asset into the other project. But then i have no possibility to change the titles and transitions.
Does anyone know a way to merge two projects?????
Many thanks, StephanStephan
You wrote
I used it a lot when i worked with the program i used before Premiere Elements.
Important: What version of Premiere Elements are you referring to in the above? Or, are you referring to another program that is not Premiere Elements?
No version of Premiere Elements allows the user to open one project file (project.prel file) in another.
You can copy/paste insert between two project files (project.prel) using ClipMate in conjunction with Premiere Elements. You cannot do a copy/paste insert between projects without ClipMate in use with Premiere Elements. The How To for this Windows Only feature is found
http://www.atr935.blogspot.com/2013/05/pe-clipmate-copypaste-between-pe.html
The alternative is to export your project 1 Timeline "trim" selectively to a file saved to the computer hard drive and then import that export into project 2.
In this workflow considerations need to include project 1 export format consistent with project 2 import settings.
So, we need details to explain the why not for
Also i could not find any way to import one movie into the other. Very strange. I would think that this is a basic function the program should have.
and
I was suprised that i could not do that. I could not copy the movie with titles in one project and copy it to the other project.
In the first part, what were your export settings from project 1 and your project preset for project 2.
In the second part, did you use ClipMate with Premiere Elements or something else?
What you want to do sounds very doable so we need to discover the whys to get to the solution.
Thank you.
ATR -
Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the file goes very well with chapters and scenes before burning). thanks very much, response appreciated, Alain
-
Load old projects in Premiere Elements 10 - Titles corrupt
Hi,
if I open video projects I created with Premiere Elements 8 in Premiere Elements 10, all my text in the titles is missing.
Even if I export the titles manually as .prtl files from PE 8 and import them into PE 10, the text is still corrupt, since all text boxes seems to have a width of 0.
How can I fix this problem?
Thanks
KonradKm,
Since the specs. of Titles has not changed in many versions, and they are defined by pretty solid XML, this surprises me. That you are having issues with PRTL Templates is a bigger puzzle, as they should work in all versions, at least back to about PrE 3. Something else is wrong.
This is but a guess, here, but can you tell us what font was used in those Titles and Title Templates?
Did you have any Text Styles applied? If so, do you recall what they were?
As a test, when you open one of those Titles (or one of the Title Templates) into Titler, and then use the Selection Tool (the little arrowhead symbol at the top of the Toolbox), to reveal the Bounding Box. Is that Bounding Box collapsed? If so, you should still see some Handles (little squares at the corners, top and bottom). Click-drag on the side Handle, to expand the Text Box. Do you see anything then?
Another thought - as this could be a display issue, I would update my video driver, to the very latest, from the mfgr's. Web site (do not trust Windows, or any utility to check for the video driver updates). Test.
Good luck,
Hunt -
Import a Premiere CS3 Project into Premiere Elements 7.
Is it possible (or NOT) import a Premiere CS3 Project into Premiere Elements 7?
Thanks a lot for any help.It is only possible to open some PrE Projects into the right version of PrPro, but will not work the other way around. The error message that you will get is "This Project was created in Adobe PrPro and you need to open it in that program."
Even going the PrE to PrPro route is filled with potholes. I can open some PrE 4 Projects in PrPro 2.0, but not all - depends on what was done. Later versions of PrE will not open in PrPro 2.0, but some have opened in CS3 and CS4, though much can keep one from being able to do that.
Sorry for the bad news,
Hunt -
Open project in premiere elements trial problem.
Unload the trial of photoshop and premiere elementens, the photoshop works correctly, but the premiere .. only the organizer works, when I try to open project or new project the program is closed automatic .....(window xp).gracias! (the proyect save correctly, buy not open after)
Thank you very much Bill, these is the information of the card, I believe that probably this one expired, your diras ... thank you again!
NVIDEA GeForce 8600 GP
Fabricante:.........................NVIDEA
Tipo de dispositivo:............Adaptadores de pantalla
Ubicacion:.........................Ranura PCI 16 (Bus PCI 1, dispositivo 0, función 0)
Version:...........................1.0.0.35
Proovedor del controlador:NVIDEA
Fecha del controlador:27-08-2007
Version del controlador:6.14.11.6230
Firmante digital:Microsoft Windows Hardware Compatibility Publ
Date: Thu, 9 Aug 2012 14:06:33 -0600
From: [email protected]
To: [email protected]
Subject: Open project in premiere elements trial problem.
Re: Open project in premiere elements trial problem.
created by Bill Hunt in Premiere Elements - View the full discussion
Can you tell us all about your computer, and especially your computer's graphics card/chip? What is its make/model? What is the version and date of the installed video driver? When PSE runs, but PrE does not, it is usually an issue with the video driver being obsolete. Good luck, Hunt
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4610620#4610620
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4610620#4610620. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
A couple different questions /similar scenarios
1) Is it possible with Project Server 2010 to have several sites (http://server/pwa1 and
http://server/pwa2 for example) communicate and build a Master Project at a third (or X) site (http://server/pwa3)
2) Is it possible with Project Server 2010 to have several sites (http://server/pwa1 and
http://server/pwa2 for example) communicate and build a Master Project at one of the original sites (http://server/pwa1 (for example))
OR is there a better way to do this/more preferred way to do this.
We found this (http://social.technet.microsoft.com/Forums/projectserver/en-US/2379c3f2-6c80-46d7-8eac-3bc2ccb2d908/master-projectsubproject-with-sites-in-pwa-2010?forum=projectserver2010general)
but its not what we're looking for
3a) Issue/Example -
We want to set up a site (http://server/pwa100) for just the president of the company - all the schedules of the subsites (/pwa99 + /pwa98) create a feed into an integrated master schedule/master project with subprojects(located
in /pwa100).
3b-1) We also want to set up sub sites (http://server/pwa99 and
http://server/pwa98) for each division VPs (and specific other people). These two sites would only allow specific user's project files to be viewed by each other...
Can their project files have linkages between the two project sites (/pwa99 and /pwa98)? Meaning if user1 logs in to /pwa99 can he see a project file (given that they have permission) from /pwa98 in the same instance?
3b-2) Can they see the project file in ProjPro and/or PWA ???
3c) is it possible to have:
+ /pwa100 (pres)
++/pwa99 & /pwa98 (two vps)
+++/pwa97 & /pwa96 & /pwa95 & /pwa-etc (minions)
each rolling up to the next level (level 3 rolls up to level 2 which can roll up to level 1)kbwrecker,
I agree with Dale. Having multiple sites will make this difficult to set up.
Not knowing how your Custom Groups/Categories have been set up, have you looked into using the "Project Permissions" feature to share projects. These permissions are 'additive' to the category permissions, so you could start out with people looking at the
projects they are authorized to via categories, and then let them share/add people as needed basis. This will also satisfy the requirement of not-loading the projects with resources..
And finally, the department and categories need not align, except that when projects from one dept are shared t another dept resource, the visibility of custom fieds will be affected.
Hope I did not go off on a tangent there :)
Prasanna Adavi,PMP,MCTS,MCITP,MCT TWitter: @prasannaadavi Blog: http://www.prasannaadavi.com
Meant to get back to this earlier - your answer is close (because its what we currently do..sort-of)
From my understanding of this issue the users are separated by department and can only see specific projects; however, when they try to share departments between users (so they can see their projects (dept a sees dept b projects)) this works - but there
is a bigger issue/main issue.
main issue: when dept B adds a new project dept. A cannot see the new project in dept B.
This can be eliviated by removing the user/s and re-adding them to the permission structure of the deptment but overall doing this several times based on user/s and projects being added it gets to be cumbersome and just plain annoying.
Any help/additional thoughts would be great -
Is it possible to make a cartoon animation video with Premiere Elements ?
Is it possible to insert 16 different images every seconds in a video ? I will like to make an cartoon animation. Is it possible with Premiere Elements ? It look like it is only possible to change a picture/image every 1 seconds.
What software is good to make a small cartoon in size 140 * 140 pixels ?
Best regards,
BoBo,
Welcome to the forum.
Doing stop-motion animation in PrE is easy, but as PrE is designed for common Video Frame Sizes, that 140 x 140 pixels will be tough. However, if you create your images at a larger size, that matches a common Video Frame Size, say 720 x 480, you can output to smaller size. In general terms, Video is horizontal rectangular.
To do the stop-motion animation in PrE, irrespective of that Frame Size, you would go to Edit>Preferences>General>Still Frame Duration, and there, you can set that Duration from 1 Frame, to almost infinity. Note: unlike some other settings on that General screne, the Still Frame Duration is in Frames.
You might be better off using a program like Photoshop Elements, and outputting to an Animated GIF. There are also many Animated GIF programs available, and many are free.
Adobe Flash would be a great choice, but it's not inexpensive. Same for Adobe After Effects. Both of those are designed to do all sorts of non-standard Video animations. However, for the price of either of those, one could buy dozens of Animated GIF creation programs.
PrE can do similar with Animated GIF (I could not find this in PrE 11, but others found it in previous versions), but due to its design around common Video specs., there will be limitations to overcome.
Good luck,
Hunt -
Low Memory/Crash problem with Premiere Elements 8
I am having a problem when editing a project in Premiere Elements 8. I can only edit for about 5 minutes and I get an error from the program saying the program is low on system memory and I need to save and proceed with caution. Within a minute or two of this error appearing, the program shuts down. This has happened when working with projects that use .MTS and .AVI files in the same project.
Help!
Thanks!
Ted
Editing program:
Adobe Premiere Elements 8 with the 8.0.1 patch.
Computer:
Dell Precision M4400
Intel Core 2 Extreme CPU Q9300 @
2.53 GHz 2.54 GHz
4.00 GB of RAM (3.49 GB usable)
Windows 7 Ultimate, 32 bit
HDD:
(1) Momentus 7200.4 SATA 3Gb/s 500-GB Hard Drive
About 50 GB used
Graphics Card:
NVIDIA Quadro FX 770M
Driver Version 8.16.11.8840Bill,
I also went thru the article you suggested about providing all relevant info to help diagnose the problem and I believe everything is shown below.
If not - please let me know what else I need to provide.
Thanks!
Ted
Editing program:
Adobe Premiere Elements 8 with the 8.0.1 patch.
Computer:
Dell Precision M4400
Intel Core 2 Extreme CPU Q9300 @
2.53 GHz 2.54 GHz
4.00 GB of RAM (3.49 GB usable)
Windows 7 Ultimate, 32 bit
HDD:
(1) Momentus 7200.4 SATA 3Gb/s 500-GB Hard Drive
About 50 GB used
Virtual Memory:
5356 MB on C:\
Graphics Card:
NVIDIA Quadro FX 770M
Driver Version 8.16.11.8840
12/14/09
Audio:
IDT High Definition Audio CODEC
Driver Version 6.10.0.6274
3/9/10
Other programs running when problems happen:
Microsoft Outlook
Internet Explorer
Project Settings
Video:
1080i
1920x1080
Audio:
48000 Hz
Camera used:
Canon Vixia HF200
File Type:
AVCHD
Timeline duration is about 20 minutes
I am using VT1 and AT1 with video and titles created in Premiere.
Problems occur when moving clips in project or trimming video. -
Burning dvd with premiere elements 11
I burn video files on to dvds. I always key NTSC widescreen. Sometimes, the image fills the tv screen. Most of the time however, there is a 2" wide black border around the image, between the image and the edge of the tv screen. How do I get the image to fill the tv screen?
Thank you for responding to my problem. I'm afraid the reading didn't help. All of my 20 files were created with the same camera, the same project settings, the same equipment, etc. But when I burned each of them to their own dvd disc, a few of the programs filled the frame on the tv down the hall. Most however, have a 2" black border around the image. It makes no sense to me.
Date: Sun, 10 Mar 2013 10:32:25 -0700
From: [email protected]
To: [email protected]
Subject: Burning dvd with premiere elements 11
Re: Burning dvd with premiere elements 11 created by John T Smith in Premiere Elements - View the full discussion
Some reading that may help... what you describe SEEMS like a mismatch between your video and your project
Online User Guide http://help.adobe.com/en_US/premiereelements/using/index.html
-Page to download current PDF http://helpx.adobe.com/premiere-elements.html
Importing Video http://forums.adobe.com/thread/1065281
-and project settings http://forums.adobe.com/thread/1112086
Saving & Sharing http://forums.adobe.com/thread/1137128
-Sharing to DVD or BluRay http://forums.adobe.com/thread/1137645
-Sharing for Movies http://forums.adobe.com/thread/1051093
-Sharing for Computer http://forums.adobe.com/thread/1058237
Steve's Basic Training Tutorials... steps are the same for several versions
-http://forums.adobe.com/thread/537685
-v11 http://www.amazon.com/Muvipix-Guide-Premiere-Elements-version/dp/14793 11200/
-All http://www.amazon.com/Tricks-Adobe-Premiere-Elements-Muvipix-com/dp/14 51529724/
-and http://forums.adobe.com/thread/498626
-and http://prodesigntools.com/four-hours-free-video-tutorials-new-photosho p-elements-9-pse9.html
-and http://prodesigntools.com/five-hours-free-tutorials-photoshop-and-prem iere-elements-7-and-8.html
FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_ faq
TIPS http://forums.adobe.com/community/premiere_elements/premiere_elements_ tips
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5136593#5136593
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5136593#5136593
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5136593#5136593. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Proxy Editing with Premiere Elements 10
I just read the great post on how to proxy edit with version 7 at http://forums.adobe.com/thread/390600?tstart=0, but I cannot find a way to save a preset with Premiere Elements 10 so I could then modify it to display previews in low-res and output in full HD. The online help from the program mentions "creating" presets, but then only describes how to slelect existing presets. Can anyone tell me how to make a new project preset, or better yet, if there is a built-in way to proxy edit with 10? Thanks!
jjenkinsnm
For reasons that I have not figured out, your last message arrived as an email notification of an Adobe post, but it is not posted in your thread yet. In that post you wrote:
The properties for the clips shows:
Type: MPEG Movie
Image Size: 1920x1080
Frame Rate: 23.976
The Interpret Footage settings show under Frame Rate the radio button for Use frame rate from file: 23.9750 is selected, and under Pixel Aspect Ratio the radio button for use pixel aspect ration from file is selected.
I never received a message to change the project preset.
As a test, I imported a clip that was shot at 1920x1080 30fps and added it to the timeline. I did not receive an error message, but this clip also has a red line above it on the timeline (as do the 24 fps clips).
Thanks for the help AT and SG.
Based on the information supplied, I cannot see a reason why your video should be displaying with a red line over its content
IF
a. Your project preset = NTSC DLSR 1080p DLSR 1080p30 @ 23.97
b. You are dragging the import (1080p @ 23.7 progressive frames per second) from Media to Timeline as the first video to be placed on that Timeline
Please review these criteria and let us know if you spot anything that you have as not consistent with a and b.
Keep in mind, when you bring in a file that is 1080p30 into this project set for 1080p24, you would expect to get a red line over the 1080p30 content since there is a mismatch between file and the project settings.
Another important matter that I am not clear on...is your problem only in previewing? Or does the problem go to previewing as well as exported product?
Thanks.
ATR
Add On: After I submitted this post, I saw that your post which I found missing previously is now displaying in your thread. -
Adobe Premiere Elements pre-release
Adobe Premiere Elements 9 is a complete movie editor software solution. Organize , create, enhance, and share home movies.
With Adobe Premiere Elements 9, you can create entertaining movies with less effort, make your movies look professional with amazing effects, share virtually anywhere fast, and automatically organize and protect your video clips and photos. Easily fix audio problems, and enjoy optimized HD and SD editing. Treat family and friends to a convenient, interactive web DVD viewing experience. And quickly share videos and photos on Facebook.
Premiere Elements team is looking to add some dedicated pre-release users who can help us in testing/evaluating the software before it is released in the market. As a pre-release user you can:
1. Use new features in PRE.
2. Suggest improvements in existing features.
3. Suggest new features.
4. Criticize the product.
We are looking for following type of users:
1. People who do not have any experience with any video editing software but who want to edit videos.
2. People who are already editing videos using any video editing application.
If you are interested in joining our pre-release program send a private message to me with the following details:
1. How much experience do you have in video editing:
2. How much experience do you have in video editing with Premiere Elements:
3. Video camera(s) you have:
4. Your Machine Type: Windows / Macintosh
5. How many hours per week can you spend in using Premiere Elements and provide feedback.
-Akshat> send a private message to me
You must have missed that part -
What additional Adobe+ 3th party applications are compatible with Premiere Elements 10?
Dearest,
I purchased Premiere Elements 10 and I am wondering what additional Adobe+ 3th party applications are compatible with Premiere Elements 10?
I tried to do some research on my own but do not get secure answers and or clear answers.
F.e. ; I would like to order Adobe After Effects to work with aside my Premiere Elements 10 but ....what AE version? I still use
a Xp Pro platform, 4GigMemory DDR2, NVDIA GEFORCE 210 1024MB videocard.
Does anyone know what AE to buy and is easy to use with my machine's capacity and Premiere Elements 10?
IF my question isn't specific enough then please escept my apology, I do not know how to ask it different.
Thanks in advance
Cheers
PeterWoops,
sorry, my bad.Kind a stupid....:)
Thank you for your quick reply and info! Excellent.
I'll search for an Ae that suits my machines performance.
Met vriendelijke groet
Peter Nauts
Date: Sun, 25 Mar 2012 21:31:02 -0600
From: [email protected]
To: [email protected]
Subject: What additional Adobe+ 3th party applications are compatible with Premiere Elements 10?
Re: What additional Adobe+ 3th party applications are compatible with Premiere Elements 10?
created by Bill Hunt in Premiere Elements Tips & Tricks - View the full discussion
Peter, Welcome to the forum. Unfortunately, you have posted to the Tip & Tricks sub-forum, which is really a repository for, well "tips & tricks." Maybe our MOD, Steve Grisetti, will move this out ot the main, Adobe Premiere Elements forum. That said, Adobe AfterEffects is a stand-alone program, for compositing video. It is not a plug-in, nor does it directly interface with PrE, as it can with Premiere Pro, if purchased in a suite. Still, the work in PrE can go to AE, and the work in AE can come back into PrE, though not in the direct line, that it can with one of the suites with PrPro and AE, via Adobe Dynamic Link (ADL). There are also several 3rd party providers, but one does need to do a bit of looking, on the 3rd party provider's Web site, to see if PrE is supported. Good luck, Hunt
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4291096#4291096
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4291096#4291096. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements Tips & Tricks by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.
Maybe you are looking for
-
In Mail, is it possible to extract email addresses of senders from just one account inbox?
-
BI7.3 -- BO4.0 - Authorization issue in Webi
Hello, Our Queries with authorization variables work fine in BW (RSRT/BEX), and work with Analysis. But when we use Webi, our authorization restrictions doesn't work. (FYI In Bex Queries we use authorization variables on every infoObjetcs authorizati
-
BPM problem in PI (XI 7.0)
Hi guys! I have a scenario, where I use BPM. The underlying system is PI 7.0 (NW 2004s). I send Idoc from r/3, send it into bpm, this should make a sync call to web service and the ws response is mapped to ather idoc and sent again into r/3. I create
-
Integration Directory(Configuration) Problem
Hi All, I am facing one Probelm. I am working one the client through Citrix. I am not able to open Integration Directory(Configuration Problem) . In onsite it's working fine. Reming all other applications(Integartion Repository and SLD and Runtime wo
-
How to make the top bar opaque as it's hard to read transparent background.
The transparent bar at the top of the browser is terrible to read and is distracting. I want to get rid of it. How?