Creating material bom with reference to Sales order bom.

How to create material bom by coping Sales order bom.?

Mayur,
Just go to T code: CS01 use BOm usage 1 & then select the copy from icon in the menu bar.
On the popup screen enter material no, plat , bom usage =5 (sales bom).
System will then allow you to select items from Sales bom. Select the items you need copied to Material BOM. Then save.
Hope this helps.
Thanks,
Ram

Similar Messages

BAPI to create notification service with reference to sales order

Hi,
My need is to create a service notification TC IW51 with reference to sales order (credit memo request).
is there a bapi to do this or i must do a bdc?
please help.
A+
Ihsen ABROUG

I have custom screen fields on notification service!
i think a bdc is better.

Re: Creating credit memo with reference to Sales Order in ICWC

Hello gurus
I am new to CRM and we hv ECC 6.0 & CRM 6.0 in our environment.
We have a process where a Credit Memo Request is created with reference to a Sales Order.
Now till this point we had launched VA01 in the ICWC and were creating the CMR with reference to the Standard Order.
Henceforth we want to move this to the CRM ICWC.
In ICWC we create Standard Sales order using Work Center IC_BT_SLO tied to the Navigation profile.
I am looking for some way of copying this order to a Credit Memo Request in the ICWC.
I tried adding the Complaints button on the navigation profile ... however it creates a new CMR ... not sure how to enable copying it from the Original Sales order in ICWC
Any thoughts ?
Thanks
Vinit

closed
Edited by: vinit parkar on Sep 1, 2011 4:25 PM

Unable to create PO with reference to sales order

Hi All,
While creating a PO with reference to sales order, we are getting an error message as below
"Error while determining local currency exchange rate type AB45 date 30.06.2010 from EUR to SEK"
In T.code: OB08, We observed that exchange rates have been maintained for the above combination
i.e. AB45 is a exchange rate key for our customer.
exchange entries have been already maintained in OB08,
Please suggest a solution to resolve this issue.
Regards,
Prasad

Hello,
While creating a PO with reference to sales order, we are getting an error message as below
"Error while determining local currency exchange rate type AB45 date 30.06.2010 from EUR to SEK"
In T.code: OB08, We observed that exchange rates have been maintained for the above combination
i.e. AB45 is a exchange rate key for our customer. exchange entries have been already maintained in OB08,
Please suggest a solution to resolve this issue.
Since you have maintained the setting in OB08, please refer to below link which has the same subject matter.
[HELP LINK !!|Error determining local currency]
Regards,
Sarthak

Inbound idoc to create outbound delivary with ref to sales order

Hi,
       I am getting and inbound idoc from the external party to create Inbound delivary with reference to sales order.
       But my inbound process code FM(IDOC_INPUT_DESADV1) checking PO no. and item which is NON SAP PO no. and item in idoc. So, it is giving error PO doesnot exist in the system .
       I want to create Inbound delivary with ref to SO not with reference to PO.
        Pls check techincal details which i am using for inbound process :
        Process code : DELS
        Inbound FM    : IDOC_INPUT_DESADV1
        Message type : DESADV
         Idoc : DELVRY05
        Kindly help me.
Regards,
Manoj

Hi,
For creating inbound Purchase Orders, you can use Idocs PORDCR1.PORDCR101 or PORDCR1.PORDCR102. I have used this and they are working perfectly for us.
Reg,
NJ

Create purchase order with reference to Sales order Line item

Hi All,
i had a requirement that i need to create the Purchase order with reference to sales order line item...
In T.code me27 client requied a input field for sales order no and with that order reference he want the data of line item to PO creation line item screen.....
please sujjust......how to proceed......
regards,
Ravi Nemani

Hi
Go to SPRO->Logistic general->Tax on goods movement->India->Movement types.
Here you will find the group of movement types check which movement types is mantained for the out side movement groups or inward movement.
also check the Material Master in MRP view if the collective requirements (02) is mantained.
Regards
Sri

Enable - Create With Reference in Sales order

Hi All,
I want to enable - Create With Reference in Sales order
We have 1 billing doc type YX1 to be used as reference for a sales order type ZX3
How to enable Create with reference from Sales Document type YX1 to Sales Document type ZX3.
Currently, I am getting error 'Copying from sales document type YX1 to ZX3 is not supported'.
Please let me know the steps to be followed.
Thank you!
Regards,
Shanu Jain

Hi,
The error clearly suggests that there is no copy control maintained b/w invoice YX1 and sales order type ZX3. You need to maintain that in SPRO > Sales and Distribution > Sales Documents > Copy control for sales documents. (You may check the correct node here). Here, you select the billing document to sales document.
Check for source and destination. You can take the source as F2 and CR (if ZX3 is a credit Memo request) as Destination document. You can copy the same and change the source and destination as YX1 as source and ZX3 as destination. Then, at the item level, if you have a new item category you can specify it as the 'Proposed Item Category'. Save it.
Now try to create the sales document ZX3 w.r.t YX1... It should work.
Hope this helps
Thanks
Mukund S

How to create item wise invoice with reference to sales order.

Hi ,
Please let me know how to create item wise invoice with reference to sales order.
Ex : Sales order has 2 line items .
When creating invoice system should create two invoices for each line items.
I have tried with copy control but I am not able to do it.
Please advise.
Regards

Hi,
Please let us know your exact requirement. Whether you want it to be fixed like only one line item to be billed every time ot it to be based on selection you do every time.
As per my understanding it should not be fixed and in that case it should like as follows,
In VF01 you will select Del. document/S.O. number and click on selection list and will take you to next screen as mention below,
and select desire line item to be billed and click on copy and will take you to billing screen.
Regards,
Ajit K Singh

BAPI-To create production orders with reference to sales order & item

Hi,
Can anyone tell me which is the best method to create open production orders?
Is there any BAPI available for creating production orders with reference to sales order & item.
I tried this BAPI "BAPI_PRODORD_CREATE".
I am getting pop up to enter serial number while executing the custom program.
Which table contains the serial number(effectivity parameters)?.

I have custom screen fields on notification service!
i think a bdc is better.

Creation of production order with reference to sales order

dear all guru's,
i m having a requirement of creating production order with ref to sales order but without changing my old strategy of make to stock.
regards
ujwal

Hi,
For the purpose of creation of production order with reference to sales order while maintaing MTS strategy you need to maintain Make to stock strategy 40 in strategy group in MRP-3 View of Material Master.
This is the only Make-to-Stock Strategy which enables you create Production Order against both Sales order as well as Demand / PIR.
So if your strategy group is already 40 then you need not change it.
However if you are using any other Make-to - Stock strategy like 10, 11 etc. then it is not possible to create Production Order against Sales Order since they dont consider Sales Order in planning.So you need to change them and set strategy group as 40.
Hope this helps.
Revert if you have any doubt.
Regards,
Tejas
Edited by: Tejas Pujara on Sep 27, 2008 8:50 AM

Purchase order with reference to Sales Order

Dear SAP Gurus,
I want to create a Purchase Order with reference to sales order.
I want to take the material in my stocks also. If i create a Purchase order with account assignment, i am able to take the inventory of that material as it is consumed at the time of GR (MIGO).
hope you understand my requirement.
Ashish

Hi
Go to SPRO->Logistic general->Tax on goods movement->India->Movement types.
Here you will find the group of movement types check which movement types is mantained for the out side movement groups or inward movement.
also check the Material Master in MRP view if the collective requirements (02) is mantained.
Regards
Sri

BAPI for Outbound Delivery Creation with reference to Sales Order - VL01N

Hi Everybody,
 We are in ECC 5.0 version.
 I want to create a enhancement for Outbound Delivery Creation with reference to a Sales Order.
 Is any BAPI available for this ?
 Any input on this will be very much helpfull.
 Please suggest any BAPI available for this, or should I go for BDC using VL01N or VL04 ?
 Thanks in advance.
regards,
Nagarajan.J

Hi Nagarajan,
The BAPI BAPI_DELIVERYPROCESSING_EXEC meets your requirement. You can create delivery with reference to sales order.
The below is the sample code...
data:lt_request like bapideliciousrequest
 occurs 0 with header line,
 lt_createditems like bapideliciouscreateditems
 occurs 0 with header line,
 lt_return like bapiret2
 occurs 0 with header line.
 lt_request-document_type = 'A'.
 lt_request-document_numb = vbeln.
 lt_request-document_item = posnr.
lt_request-material = matnr.
lt_request-plant = werks.
lt_request-stge_loc = lgort.
lt_request-quantity_base__uom = base_uom_qty.
lt_request-delivery_date = sy-datum.
append lt_request.
call function 'BAPI_DELIVERYPROCESSING_EXEC'
EXPORTING
 DELIVERY_EXTEND =
 TECHN_CONTROL =
 tables
 request = lt_request
 createditems = lt_createditems
 return = lt_return.
loop at lt_return where type = 'A'
 or type = 'E'.
 exit.
endloop.
if sy-subrc <> 0.
Use the BAPI for Commit
 call function 'BAPI_TRANSACTION_COMMIT'
 exporting
 wait = 'H'.
endif.
Thanks
Ramakrishna

Delivery note with reference to sales order - 0 quantity items

Hi all,
our system allows items with quantity 0 to be created in delivery notes with reference to sales orders.
This happens when some items in a sales order are out of stock while others are availiable. The unavailable items are included in the delivery note, but have quantity 0.
The requirement is to eliminate this behavior and to create delivery notes with availiable items only.
I would be grateful for any advice how to realise this.
Best regards, Andreas

Make the necessary configuration i.e. Check quantity 0 field value should be maintained as B in the respective delivery item category using transaction 0VLP.
Regards,
GSL.

Sales order with reference to sales order

Hi,
 I need to create a sales order with reference another sales order using bapi CreateFromDat2. Please note, Sales Ord. Dist. channel, Div, sold-to to of the new order are different from original order. I gave reference order in field order_header_in-REFDOCTYPE . I am getting following error when I perform single test " FB Call: insufficient parameters. Can any of you tell me how to overcome this issue. And is it possible to create an order refering to another Saler order with different Sales Ord, Dist. channel, Division, sold-to ?
<REMOVED BY MODERATOR>
Cheers
Sudhaker
Message was edited by:
 Alvaro Tejada Galindo

There is an OSS note <a href="https://service.sap.com/sap/support/notes/370988">Note 370988 - BAPIs in SD: Creation with reference</a>
Symptom
This note describes the problems of the 'Create with reference' function when using BAPIs to create sales documents.
If you are working online, you can use this function module to create a sales document with reference to an existing sales document or a billing document (for example, a debit or credit memo request) according to fixed rules. The rules for transferring information from the source document to the target document are defined in the copying control on header and item level. The creation with reference permits an item selection.
When you use BAPIs in SD, a function of this type is not fully available. A reference is only possible for a quantity contract, so that the target quantity of the contract can be reduced by the order quantity of the sales document. Furthermore, the document flow is also updated.
As an alternative to 'Create with reference' in Transaction VA01, two variants are provided for solving the 'Create with reference' problem in the BAPI.
 1. Create a '1:1 ' - that is, a document copy of a sales document (customer quotation, order) with 'BAPI_SALESDOCUMENT_COPY'. At this point, you cannot create the 1:1 copy of either a billing document or a delivery.
 2. Create a sales document that refers to an existing document with 'BAPISDORDER_GETDETAILEDLIST' and 'BAPI_SALESORDER_CREATEFROMDAT2'.
Other terms
BAPI_SALESDOCUMENT_COPY, BAPI_SALESORDER_CHANGE, BAPI_CUSTOMERINQUIRY_CHANGE, BAPI_CUSTOMERQUOTATION_CHANGE, BAPI_SALESORDER_CREATEFROMDAT1, BAPI_SALESORDER_CREATEFROMDAT2, BAPI_SALESORDER_CREATEFROMDATA, BAPISDORDER_GETDETAILEDLIST
Reason and Prerequisites
As of yet, no method exists for creating a sales document that refers to an existing document.
Solution
For solution No. 1
 1. Create the documents using the BAPI_SALESDOCUMENT_COPY function module. However, this only permits a 1:1 copy without factoring out individual items.
 2. After you have created the document copy, you can use a change BAPI to edit this copy.
For solution No. 2
 1. Collect the data for the reference document (for example a customer quotation) with the 'BAPISDORDER_GETDETAILEDLIST' function module. In the example code, focus exclusively on the partners, items, schedule lines and conditions.
 2. Prepare the Data. Execute the 'copying control' manually. This way, you decide which values are to be transferred.
 3. Create the sales document using the 'BAPI_SALESORDER_CREATEFROMDAT2' function module by transferring the prepared data.
 4. Finally, you must remove a COMMIT WORK so that the sales document can be written into the database.
An example of solution 2 is attached as a text file. You are allowed to select items and quantities for example, if you use input parameters. If there are no entries, then transfer 1:1 from the reference document. When you enter the 'condition type' parameter, you can determine whether conditions are copied or recalculated ('G' for transferring from the preceding document; 'B' or ' ' for re-determining, and 'C' for re-determining with transfer of the manual elements).
Sample : <a href="https://websmp108.sap-ag.de/~sapidb/012003146900000486112004E/BAPI_COPY_WITH_REF.txt">ZZ_MS_BAPI_COPY</a>
Regards

Can we create outbound delivery with reference of purchase order

Hi All,
can we create outbound delivery with reference of purchase order?

dear friend,
as far as i know you can create it with the following references:
-to sales order;
-to STO;
-to subcontract order;
-to project;
-without any ref
are you talking about stock transport order ?
regards,

Creating material bom with reference to Sales order bom.

Similar Messages

Maybe you are looking for