Creating Material Master views

Hi Experts,
I am writing a program to upload material master views.
From that program i am getting the file as output and by using RMDATIND program(Direct input program) i am uploading that output file to that program and creates the material when it does not exists and if the material exists it will check the particular view that i want to upload.
In doing this i got one question that, i am checking the field VPSTA in MARA table for the views that are created to that material.
That field contains the values as EDALS.
E for PURCHASING VIEW
D for MRP VIEW
A for WORK SHEDULING VIEW
L for GENERAL PLANT DATA
S for WAREHOUSE MANAGEMENT VIEW
I want to know the characters for the other views also.
Can any one give information for that views.
Thanks,
Kruthik.

Hi,
Work scheduling A
Accounting B
Classification C
MRP D
Purchasing E
Production resources/tools F
Costing G
Basic data K
Storage L
Forecasting P
Quality management Q
Warehouse management S
Sales V
Plant stocks X
Storage location stocks Z
Rgds,
PB

Similar Messages

Create Material Master Views in mass-change

Dear All,
We have to add a additional view to the material master of some products.
Is this possible to do as a mass change (ex. MM17) or have we to do it with transaction SCAT/ MASS?
Do you know an other solution?
Thank you.
Best regards,
Thomas

Hi,
Use
LSMW using standard SAP provided RMDATIND program- check with ABAPer - You can extend all views or you can pick and choose selected views.
or
BDC scripts - If u have only 1/2 views extended use this.
Mass change doesn't help.
Hope this helps

LSMW--Create Material master data

Hi,
When I use LSMW to create material master data, I set up all step, but when I go to last step "13 Run Batch Input Session", there is error message like "Select at least one view" in moudle SAPLMGMM, screen 0070, anybody can tell me what is problem, thanks a lot.

Hi,
This is due to error while recording for MM01,
Please do a Repeat recording and ensure that once the material number, industry sector and material type is entered, on the next screen you need to select all or at least a single view to create the MMR.
Regards
Merwyn

Is it possible to Create Material Master without Profit Center ?

Hai,
      1) Is it possible to Create Material Master without Profit Center ?
      2) How SAP System Validate Profit Center in material master. ? is it material Type wise ?
      3) Whether PO Order Creation,GRN & MIRO Possible for those material Master without Profit Center.?
Kindly Explain me clearly..
Thanks & Regards,
Swetha

Hi,
Profit center is at the plant level.
You can create material master even with out a profit center.This field will be there in the costing view and and general sales/plant data.
while creation of the materila master if do not select these views system will not ask for that.Normally it is pertaining to the costing analysis.
A profit center manager is held accountable for both revenues, and costs (expenses), and therefore, profits. What this means in terms of managerial responsibilities is that the manager has to drive the sales revenue generating activities which leads to cash inflows and at the same time control the cost (cash outflows) causing activities. This makes the profit center management more challenging than cost centre management. Profit center management is equivalent to running an independent business because a profit center business unit or department is treated as a distinct entity enabling revenues and expenses to be determined and its profitability to be measured.
Business organizations may be organized in terms of profit centers where the profit center's revenues and expenses are held separate from the main company's in order to determine their profitability. Usually different profit centers are separated for accounting purposes so that the management can follow how much profit each center makes and compare their relative efficiency and profit. Examples of typical profit centers are a store, a sales organization and a consulting organization whose profitability can be measured.
For more info,please refer
http://help.sap.com/erp2005_ehp_04/helpdata/EN/cc/36428094f311d2b47a006094b9b0a5/frameset.htm,
Regards,

How to Create material master workflow

Hi All,
Can anybody tell me how to create material master workflow?
i need to customize the workitem for creating data in different views in MM01 transaction with restriction to particular user.
Regards,
Priti

Hi,
This link is to display a material.My requirement is to create a workflow which will allow a responsible person to enter data for specific department data e.g Purchase,Accounting etc.Initially anyone can create data using basic data1 and basic data2 views.After this my workflow will be triggered and it will go to next person who is responsible to enter Purchase data and then Accounting data.
Plz help me to create different views with respect to person.
Thanks in advance.

10 digit code need to be created while creating material master

Hi, Please advise how to create a 10 digit code automatically when we create material master in SAP? Please note that this code is required as one of the basic data view fields, not as material code. Is there any enhancements available for the same.

Dear
Try to use Product Hierarchy field MARA-PRDHA in the Material Master for this purpose
Regards
JH

Create Material Master using workflow (urgent)

Hello all,
We have an urgent client requirement to create material master using workflow.
Different views for the material master will be created by the relevant departments.
ex: Accouting 1, 2 will go to accounts deptt.
I have studied the workflow tutorial (20 units) on <b>SAP help</b> for leave of absence and have some understanding of objects, methods, bindings etc
I am however finding it very difficult to define the steps to create a workflow for material master. Are there any standard steps already defined that i can use.
Any help/inputs will be greatly appreciated.
Regards
S. Datar

Hi,
You need to speak to a workflow consultant.
You can get workflow to do many things (including creating a material master) but it takes a lot of coding and design.
For those of you who think that workflow is just used for the standard SAP workflow tasks, you have to realise that workflow is far more powerful and far more useful than many people think.
It is always referred to as "Event triggered messaging" but it is more accurate to call it "Event triggered events".
Within workflow you can chain together many different transactions and or ABAPS and so you can get it to do virtually anything you want (as long as you know how).
In this case you need the workflow to trigger an ABAP or BTCI session etc. that works through the MM01 transaction. It is relatively easy to get it to do this, but I am not technical enough to be able to help with the steps involved (sorry)
Steve B

Material Master views for every material type

HI Expertis,
I am facing to the big problem. My requirement is to identify the Material Master Views relevent to the each and every Material Type.
As an example, for the material type "FGTR" what should be the required views to create material master?
From the MM01 Txn i found 36 Material types. Also found the standard views in "OMS2" Txn. But in OMS2 txn it gives me almost all the views in material master.
Atlease i hope to categorize the material types which are going to use same material views. So i can ask abaper to develop it.
these are the required Material types : MODE, FGTR, WETT, KMAT, LEER, LGUT, FERT, FOOD, INTR, CONT, IBAU, HERS, NLAG, NOF1, UNBW, HIBE, VERP, FRIP, PIPE, FHMI, ROH, LEIH, HALB, DIEN, ERSA, HAWA
I would be gratefully thank u, if u can guided me on this matter.
Thanx & Regards,
Rashika.

Hi,
You can ask your abaper to write a small program by using table t134(T134-PSTAT) and T132T .From this tables ,for each material type, you get all views.
User department Maintenance status
Work scheduling A
Accounting B
Classification C
MRP D
Purchasing E
Production resources/tools F
Costing G
Basic data K
Storage L
Forecasting P
Quality management Q
Warehouse management S
Sales V
Plant stocks X
Storage location stocks Z
hopw this will help you.
With Regards,
Jaheer

Create Material Master Data with BAPI

Hi,
I don't know using of BAPI. I want using BAPI_MATERIAL_SAVEDATA bapi for creating material master data for Basic Data1, Basic Data2, Purchasing and MRP views. Does anybody can help me ?
Thank you
Good night

Hi,
Please refer to the documentation below:
BAPI_MATERIAL_SAVEDATA
Short Text
Create and Change Article Master Data
Functionality
You use this method to create new material master data or to change existing material master data. The data on a material can be transferred for each call.
When creating material master data, you must transfer the material number, the material type, and the industry sector to the method. You must also enter a material description and its language.
When changing material master data, you need enter only the material number.
In the header data, you must select at least one view for which data is to be created. Depending on the view selected, you must maintain other required parameters. If you do not enter values for all of the required parameters, the method is ended with an error message.
The corresponding fields in the tables (such as CLIENTDATA) must first be supplied with data by the calling program. An indicator must also be set for each of these fields so that the data is written to the database by the method. This requires the calling program to supply the corresponding field with the indicator in a checkbox table (for example, CLIENTDATAX). Checkbox tables exist for tables that do not contain any language-dependent texts (MAKT, MLTX), International Article Numbers (MEAN), or tax classifications (MLAN). Several data records for a material can be created in these tables.
If a structure contains fields for units of measurement (such as structure CLIENTDATA, field BASE_UOM), language indicators (such as structure MATERIALDESCRIPTION, field LANGU), or country indicators (such as structure TAXCLASSIFICATIONS, field DEPCOUNTRY), there is always a field of the same name with the ending _ISO. This makes it possible to transfer either the internally used SAP code or a standardized ISO code for the units of measurement, language indicators, or country indicators. ISO codes are converted to an SAP code internally for further processing. The ISO code is used only if the SAP code is not transferred. If you use ISO codes, there must be a unique assignment of the ISO code to the SAP code in the following activities in Customizing for Global Parameters:
Check Units of Measurement
Define Countries
If you want to maintain long texts (basic data texts, internal comments, purchase order texts, material memos, or sales texts) or customer-defined fields for a material, some special conditions have to be observed. They are described in the documentation for parameters MATERIALLONGTEXT and EXTENSIONIN.
Parameters
HEADDATA
CLIENTDATA
CLIENTDATAX
PLANTDATA
PLANTDATAX
FORECASTPARAMETERS
FORECASTPARAMETERSX
PLANNINGDATA
PLANNINGDATAX
STORAGELOCATIONDATA
STORAGELOCATIONDATAX
VALUATIONDATA
VALUATIONDATAX
WAREHOUSENUMBERDATA
WAREHOUSENUMBERDATAX
SALESDATA
SALESDATAX
STORAGETYPEDATA
STORAGETYPEDATAX
FLAG_ONLINE
FLAG_CAD_CALL
NO_DEQUEUE
NO_ROLLBACK_WORK
RETURN
MATERIALDESCRIPTION
UNITSOFMEASURE
UNITSOFMEASUREX
INTERNATIONALARTNOS
MATERIALLONGTEXT
TAXCLASSIFICATIONS
RETURNMESSAGES
PRTDATA
PRTDATAX
EXTENSIONIN
EXTENSIONINX
Exceptions
Function Group
1001UEB
Thanks,
Sandeep.

Tax Code in Material Master views

Hi,
I want to know in which view we can find the details of "tax code " for the material in Material master views?.
Also suggest me where else we can find the information of Tax Code for the given material.
Thanks

Hi,
you cannot get the tax code in material master. In material master we mainatin tax releated information in Foregin trade import and to get that contaol data tab in material master you have to do some config.
After mainatining the data in material master tax code is maintained in FV11 in case of taxinn and in case of taxinj tax releated data is to maintaiin in J1id and different tax code has to be created with the help of FTXP
Plz let me know if any further information is required

MG144 Error Messages while creating Material Master

Hi,
When creating Material Master getting Error for structure field is required. Message Number MG144.
Pls suggest.
Regards,
VR

Go through this note 45998
Or check, which field is required field and try to maintain or just make the optional entry in customizing

Error Message no. MM214 while creating material master

Hi folks!!
While creating material master, when i fill the MRP controller field and press enter, I get the message...
The MRP controller 391 does not exist for plant
Message no. MM214
I have checked, the MRP controller is availble in Master Data for MRP Controller. And we have already created many material master with this MRP Controller.
What could be the possible cause for this error. Please help.
Best regards

Hi Qamar,
Please go thru the bellow threads,
Assignement of MRP controller to Plant
MRP CONTROLLER
MRP Controller
Re: MRP controller extension from plant 1 to plant 2
Thanks,
Swamy H P

Runtime error while creating material master data

hello sir,
i am facing one prolem while creating MATERIAL MASTER DATA.
AFTER GIVING ALL REQUIRED INFORMATION WHEN I AM GOING TO SAVE THE DOCUMENT ITS SHOWING ABAP RUNTIME ERROR.
MESSAGE TYPE: - MDS_KEYMAP.
MESSAGE CLASS: 001.
PLEASE TELL ME WHAT TO DO?
REGARDS..

SIR THANK YOU FOR YOUR REPLY.
I ALREADY DONE THAT DUMP ANALYSIS.
SO PLEASE KINDLY GIVE ME IN DETAILS ABOUT THAT SOLUTION...

Create Material Master Record with Text

Hi, I am looking to create material Master Data via ABAP. I currently have some code that creates the Master Data Characteristic value I want, but I need the text as well. Can someone tell me what I need to do to add the text for the Master Data Characteristic value?
Here's what I have using CL_RSDMD_UPDATE_MASTER_DATA=>UPDATE_ATTRIBUTES_STATIC
TYPE-POOLS: RS, RSSM.
DATA: T_ZFREETEXT   LIKE STANDARD TABLE OF ZFREETEXT.
DATA: T_INFO        TYPE RSSM_S_MINFO.
DATA: RETURN_STATUS TYPE RSARR_T_IDOCSTATE.
DATA: RETURN_SUBRC LIKE SY-SUBRC.
DATA: MSG TYPE RS_T_MSG.
DATA: L_R_ACTIVATE_MASTER_DATA TYPE REF TO CL_RSDMD_ACTIVATE_MASTER_DATA.
INSERT ZFREETEXT INTO TABLE T_ZFREETEXT.
CALL METHOD CL_RSDMD_UPDATE_MASTER_DATA=>UPDATE_ATTRIBUTES_STATIC
    EXPORTING
      I_IOBJNM        = '0MATERIAL'     " Technical name of InfoObject
      I_CHAVL_ENQUEUE = RS_C_FALSE
      I_T_DATA        = T_ZFREETEXT
      I_S_MINFO       = T_INFO
      I_MONITORING    = RS_C_FALSE
    CHANGING
      C_T_IDOCSTATE   = RETURN_STATUS.
IF SY-SUBRC <> 0.
    RETURN_SUBRC = 'Error happened'.
ELSE.
    RETURN_MSG = 'Process Completed Successfully'.
    CREATE OBJECT L_R_ACTIVATE_MASTER_DATA
      EXPORTING
        I_IOBJNM            = '0MATERIAL'
        I_P_Q_HAVE_TO_EXIST = RS_C_FALSE.
    IF SY-SUBRC = 0.
      L_R_ACTIVATE_MASTER_DATA->ACTIVATE(
      IMPORTING
      E_SUBRC = RETURN_SUBRC
      CHANGING
      C_T_MSG = MSG ).
    ENDIF.
ENDIF.

Dear Kenneth,
do you need to add master data during load of transaction data in planning scenario? If yes, you can do this with a planning function of type exit in the INIT function module.
I think you've to use the table ETO_CHAS (table for char. combinations) and all kind of char. combinations has to be transfered.
data:
l_s_chas type /1SEM/_YS_CHAS_"YOURCLIENT"YOURPLANNINGAREA",
l_r_co_area type range of /bi0/oico_area,
l_s_costcenter type /bi0/pcostcenter.
field-symbols:
<f_coar> type /bi0/oico_area,
<f_cctr> type /bi0/oicostcenter.
select * from /bi0/pcostcenter into l_s_costcenter
             where co_area IN l_r_co_area
             and objvers = 'A'.
<f_coar> = l_s_costcenter-co_area.
<f_cctr> = l_s_costcenter-costcenter.
INSERT l_s_chas INTO TABLE eto_chas.
endselect.
Regards, Clemens

Create material master get error message

Hello Guys,
I get the error message as below when i create material master . can you help me?
error message
nternal error in FORM/FUNCTION ckms_buffer_write in position 19 with RC 0
Message no. C+099
Procedure
Please inform your system administrator.
Thanks and best regards,
Alengao

Debug the program with help of ABAPer and check it.
Also pls check these NOTES,
414204, 933809, 390655,0001096890
0001126497
0001164684
0001230454
Edited by: Afshad Irani on Aug 12, 2010 3:12 PM

Creating Material Master views

Similar Messages

Maybe you are looking for