Creating Message Type

what are the possible way to create message type and how you link the message type with idoc type.
Thanks in  Advance....

Hi Senthil,
There is a transaction code for link the message type to the idoc type using the T.code we82.
There we can assign the our own message type and Idoctype (basic type) we can assign. If u want to extension the basic type we have the option and we must release it.
********rewords some points if it is helpful.
Rgds,
P.Naganjana Reddy

Similar Messages

  • Bapi for creating message type in a sales order

    Hi, I am involved in a IS-MAM project for an italian company.
    I need to create or add a message output type in a sales order in a complex batch program. I thought to use a bapi technicality; in particular BAPI_ADMGMTSO_CHANGE in order to change the document.
    How can I create message type in the order? Can I use the same bapi or I need of an other one?
    thanks in advance for your help
    Lucia

    Can you please provide more information...

  • What is the Technical Reason for Creating Message Type

    Hi,
          Is there any particular reason to use Message Type. Already we are defining Data Type. Please give me some detailed explanations.
    Thanks in Advance.
    Thanks & Regards,
    Giridhar.C

    Hi Giri,
    SAP telling below reason why we are creating message type
    "A message type comprises a data type that describes the structure of a message. For technical reasons, a data type alone is not sufficient to describe the instance of a message: Data types are defined in XML Schema as abstract types that are not yet tied to an element. You can only describe an instance of a message when you have specified a data type as an element type. Therefore, a message type defines the root element of a message"
    Regards,
    Raj

  • Creating message type in XI with imported objects

    Hi,
    I have imported an Idoc Structure into XI.
    Now I need to create a message type with structure from imported Idoc + some additional fields.
    Can some one tell me how to go about this. Because once I drag and drop the imported Idoc structure, I doesn't allow me to add any more fields during message type creation.
    Is there a different to way to achieve this.
    Best Regards,
    Kiran

    Hi Kiran,
    the Integration Builder supports two ways of modelling an interface. The first way is to build the required datatypes from scratch (with the datatype editor) then define (fault) message types using these datatypes and finally define the message interface.
    The second way is to use an externally defined structure by importing an IDoc or RFC from an R/3 or an external DTD/XSD/WSDL from filesystem. Then define your Message Interface using the messages from the imported objects.
    Currently there is nearly no support for mixing these two approaches as you have in mind (taking an externally defined structure as starting point, then enhance this structure within the Integration Builder).
    The best workaround I can suggest to you, is import the IDoc, take the XSD which is displayed for it, download it to your local file system, edit it there (with notepad when you are an XSD expert, with some other tool like XML Spy otherwise) and upload the modified file as External Definition.
    BTW: For this procedure you do not necessarily need to upload the IDoc to the Repository. As far as I know the R/3 also offers the possibility to generate an XSD representation for an IDoc (do not remember the exact way to go there).
    Greetings Stephan

  • Ale with user created message type

    Hello,
    I have a created a segment ,idoc and message type and done the assignment of Idoc with message type also.
    i have to send the material 800 to 810 client through ALE.
    By using the Standard Message type MATMAS i m getting the material on 810 client.
    But when i am using my message type ie ZMAT_MSG in tcode BD10 on client 800 to send the material it is saying error that message type does not exist.
    I am not getting the problem
    Or it is not possible to use your message type to send the material through Tcode BD10.You have to always use the standard message type MATMAS.
    If yes then how to use our own message type to transfer the data from client 800 to 810.
    Please reply .
    Manish

    Hi Vasu,
    Please try this.
    1. Create distribution model (BD64) for message type MATMAS_BAPI.
    2. Create inbound partner profile (WE20) for message type MATMAS_BAPI and IDoc type MATMAS_BAPI01 and process code BAPI.
    3. Create IDoc ports (WE21)
    4. Setup RFC destination (SM59).
    Hope this will help to start with.
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • Transaction/Program to create message type LIP076 Idocs

    Hi Idoc Experts,
    Can you please let me know the T-code/program to send MD61(weekly forecast) data thru the idocs.
    FYI- I am planning to use message type LIP076 with basic type SOPGEN01
    Example: BD14 T-code to send the Vendor master details thru idoc.
    I am looking for a similiar transaction/program, so that it will create LIP076 idocs with MD61 details.
    Thankyou,
    Ravi

    Hello Ravindran
    You can also check the documentation in the below path and when you execute it it takes you to transaction SXDA. I am not authorized in my system, may be you can check more detailed in your system about the transaction..
    SPRO -- > IMG --> Production --> Production planning --> Demand management --> tools --> Data transfer workbench: planned independent requirements.
    Regards,
    Thanga

  • Why do we create message types (we81)?

    Hi Guys,
    Could u plz explain me for wht purpose message types r created?
    thanking u...
    regards..

    hi
    good
    A message type comprises a data type that describes the structure of a message. At the following points in SAP Exchange Infrastructure you can refer to the message to be exchanged at runtime by using the message type:
    ·        More than one message interface can use the same message type. For example, an asynchronous outbound message interface and an asynchronous inbound message interface can reference the same message type because the request message does not need to be mapped.
    ·        When defining a message mapping you can directly reference message types to map messages from an outbound interface to messages from a receiver interface.
    http://help.sap.com/saphelp_nw04/helpdata/en/2d/c0633c3a892251e10000000a114084/content.htm
    hope this will help you.
    Thanks
    mrutyun^

  • Http 403 when creating message type

    Hi,
    I have a bpel process that invokes a secure web service (https://....?wsdl). To be able to create the partner link and execute the process, I had to copy the certificate in two directories and import the certificate in jdeveloper and soa suite.
    So, now I'm able to invoke the secure web service. The problem appears when I want to create a new Message Type using the secure web service. I try to choose the ws types and this error appears: "Error reading message parts! HTTP connection error code is 403"
    I tried creating my own schema but when using xpath expression there are problems with the namespaces. So I would need to create the variable using the original wsdl.
    Does anybody know what is happening? How can I solve this issue?
    Thanks in advance,
    Zaloa

    Installed tamper data and from what I can tell, the requests go back and forth between AM server and protected resource. Here's the Request Graph output.
    http://iamsys06.iamtest.com:8080/ 302 103
    http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 16
    http://iamsys05:9080/.../Login?goto=http%3A%2F%2Fiams... 200 16
    http://iamsys05:9080/favicon.ico 404 50
    http://iamsys05:9080/.../Login?AMAuthCookie=AQIC5wM2LY4Sfcz... 302 183
    http://iamsys06.iamtest.com:8080/ 302 30
    http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 17
    http://iamsys05:9080/.../Login?goto=http%3A%2F%2Fiams... 302 10711
    http://iamsys06.iamtest.com:8080/ 302 23
    http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 15
    http://iamsys05:9080/.../Login?goto=http%3A%2F%2Fiams... 302 16
    http://iamsys06.iamtest.com:8080/ 302 18
    http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 17
    http://iamsys05:9080/.../Login?goto=http%3A%2F%2Fiams... 302 13
    http://iamsys06.iamtest.com:8080/ 302 13
    http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 10
    http://iamsys05:9080/.../Login?goto=http%3A%2F%2Fiams... 302 10
    http://iamsys06.iamtest.com:8080/ 302 16
    http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 11
    http://iamsys05:9080/.../Login?goto=http%3A%2F%2Fiams... 302 12
    http://iamsys06.iamtest.com:8080/ 302 12
    http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 10
    http://iamsys05:9080/.../Login?goto=http%3A%2F%2Fiams... 302 12
    http://iamsys06.iamtest.com:8080/ 302 12
    http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 10
    | | | | |
    URI Status Duration 20:59:52.542 20:59:56.512 21:00:00.482 21:00:04.451 21:00:08.421

  • USE OF CREATING MESSAGE TYPES

    PLZ TELL ME THE USE OF CREATING THE MESSAGE TYPES AND MESSAGE INTERFACERS?

    Hi DHANUNJAY,
    Message type: message type is the structure which holds our message at runtime. you declare the data type first for which you create a message type.
    Message Interface: It can be of Outbound/Inbound/Abstract type and of Synchronous/Asynchronous mode.
    message interface holds the message type. in the message interface level you can define the interface for source side(outbound) or target side(inbound).
    The communication in XI is done in the Message Interface level(which is the Outer most level of communication).
    Please reward.
    Regards
    Sankar

  • How to create a message type

    Hi, All
      I need to create a message type, Enter the fields change pointers eligible for key changer in this message type. Extract program needs to be created and this program accesses the key changer field’s status and the changed values on day to day basis for the message type using tables BDCPS & BDCPV.
    Can any one tell me how to do this.
    Many Thanks.

    Hello siri
    I think if you talking with respect to ALE/IDOC or EDI/IDOC..........this posting has to be entered in data transfer.........................and you can create message type using trasaction we81.
    Vj

  • How to main the message type is I for the exceptions when we create the FM

    HI ,
    I have created one FM.in that i need to maintain the exceptions. for handling the exceptions message type is I.
    where can i maintain the exceptions message type I.is it at the creation of FM or calling of FM?
    tell me in details.
    for handling exceptions:
    No Sales Order Created  = Message type 'I'
    OTHERS = Message type 'I'
    thanks in advance

    Exceptions are only code and text, the kind of message comes from the raising statement in the FM code.
    RAISE <Exception>.
    MESSAGE..... RAISING <Exception>.
    The management of the resulting code is in the caller program. ([Calling Function Modules From Your Programs|http://help.sap.com/saphelp_nw70/helpdata/en/d1/801edb454211d189710000e8322d00/frameset.htm])
         EXCEPTIONS
              no_values_found = 1
              ERROR_MESSAGE   = 2
              OTHERS          = 3.
    CASE SY-SUBRC.
      WHEN 1.
    I don't understand your requirement, try to read some documentation like [Specifying Parameters and Exceptions|http://help.sap.com/saphelp_nw70/helpdata/en/d1/801ee8454211d189710000e8322d00/frameset.htm] in [Function Builder|http://help.sap.com/saphelp_nw70/helpdata/en/d1/801e9a454211d189710000e8322d00/frameset.htm] and reformulate please.
    Regards,
    Raymond

  • How can I put a filter to message type COND_A

    I am creating message types: COND_A from Change Pointer.
    I have an active filter on element: Condition type. (BD64). This is working OK.
    I also want to set the filter on element: Material type.
    This is not working, probably because this element is not an active field in any delivered IDoc Segments. (Ref. WE05). The result is that no messages (IDoc's) are delivered.
    How can I get this filter to work for COND_A?
    In other words: How can I select on Material type = 'XXXX' creating message type COND_A from Change Pointer?

    No, however, you can have Favorites and Recents show on the App Switcher (Multitasking) screen, assuming you are running iOS 8: Settings App > Mail,Contacts,Calendars > Show in App Switcher [under CONTACTS]

  • Payment Run F110:  Message type PAYEXT / EUSPEXR

    Hi,
    For every payment run (transaction F110) for EDI Partner there's a generation of idoc (message type PAYEXT) containing all the information.
    Also there is another idoc get created (Message type EUSPEXR) containging the summary info. Is there a way to stop / Suppress the creation of idoc for message type EUSPEXR.
    I did not include this in the partner-profile but still it is getting created.
    /Manik

    Hi,
       I would suggest that you write a Function Exit in EXIT_SAPLIEDP_101 or EXIT_SAPLIEDP_102. This is available in the enhancement FEDI0002 in SMOD transaction.
       You can clear the internal table data present in the IDOC of message type "EUPEXR" in the Exit. I havent tried this. But can be given a shot.
    Thanks,
    Shankar.

  • Message type is not populating in the Inbound idoc control record

    Hi,
    I have created an Inbound Idoc function module and have done the necessary Idoc settings. But, while testing in WE19, I observed that control record is not getting populated with message type and it is dumping.
    The settings which I have done in WEDI as follows:
    1. Created Idoc segments with necessary fields and released
    2. Created Idoc type for the segment type
    3. Created message type
    4. Assigned message type to basic type
    5. In the inbound processing settings,
       filled the ALE attributes with the Idoc function module name and input value '0'
    6. Assigned FM to basic type and message type
    7. Created process code and assigned the process code to message type
    Please let me know, the reason for the message type not populating in the control record. Useful answers will be surely rewarded.
    Best Regards,
    Mallika

    Hi,     
    Maintain partner profile (Transaction code WE20) for the message type you defined in WE81 and put your process code in partner profile and check your logical system settings also in transaction SALE.
    Thanks
    Rahul

  • Cript - Message type- Error in Printing

    Hi,
       We have developed the custom srcipt for the PO printing and configured it NACE.
    Now we are facing strange porblem that when we creat message type using this output type then it works for one PO and does not work with the other PO. The status is shown in yellow. Please let me know what could be the reason.
    Regards,
    Shweta.

    SAP Standard Scripts ( how to Modify Standard Scripts)
    Go to transaction OMFE. Tell me what you see there for the output type you are interested in. Let me take the standard output type NEU. The entry looks something like this.
    NEU Purchase order 1 SAPFM06P ENTRY_NEU MEDRUCK.
    The first one is your output type, next is its description, next is the medium, then the program, routine, and the form name.
    You already copied the layout MEDRUCK to ZMEDRUCK. Now copy SAPFM06P to ZZSAPFM06P. Now ENTRY_NEU routine is in the include FM06PE02. You need to make your changes here to accommodate for the new field. So copy this include to ZZFM06PE02 and make your changes. Also, in ZZSAPFM06P, change the line where it says INCLUDE FM06PE02 to INCLUDE ZZFM06PE02.
    Now in this routine ENTRY_NEU, there is a function module call ME_READ_PO_FOR_PRINTING which reads in the PO data from the tables. We need to copy this function module as well as this is where you will do your extra selections for the new fields. You will do the same with the other function call ME_PRINT_PO, if you need to change anything on the print.
    after this to define output type...
    NACE
    You can track the form and the print program used for that form
    NACE is used to create output type while creating the output type you will mention forms, and driver program.
    that will be maintained in the table TNAPR.if you create the output type using NACE then it will be automatically visible in table NAST and TNAPR.
    so check in NAST, TNAPR table
    http://help.sap.com/saphelp_erp2005/helpdata/en/c8/1989fe43b111d1896f0000e8322d00/frameset.htm
    Condition records in NACE?
    EX--in simple terms..take a transaction say ME21N ( Purchase Order ), u can see a Print icon there. now when u click on this icon, it has to print the PO document. Now how does it do that? when u click Print, the control gets transffered to a print program, now which program gets triggered is decided by what program name u specify in NACE.
    So in NACE>EF>Output Type>NEU>processing routine--> u can see some standard program already configured( maybe SAPFM06P n form MEDRUCK )..these are the programs n sapscript that gets executed wen u say "PRINT" in the transactrion...so u can customise the print program for customer changes over here by copying the standard program n form into a Z/Y one and replacing the program names in NACE.
    SAPScripts
    http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
    http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
    http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
    http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
    http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
    http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
    SAP SCRIPT FIELDS
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/d1/8033ea454211d189710000e8322d00/content.htm
    scripts easy material
    http://www.allsaplinks.com/sap_script_made_easy.html
    Debugging Document.
    http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
    http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
    http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
    http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/84/1f624f4505144199e3d570cf7a9225/frameset.htm
    http://help.sap.com/saphelp_bw30b/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
    Reward points for useful Answers

Maybe you are looking for