Creating mix storage unit at id point
how can I create mix storage unit at id point. When I do gr of purchase order TO is created & confirmed automatically for id point. so I want to create mix pallet at id point. How can I create it . I checked LT09 but there only one storage unit I can enter in initial screen.
is this pallet number known into the system (is the warehouse HU managed) ?
if it is a SU managed
As per standard SAP flow the stock first comes to 902 storage type and then it goes to physical bin location.
in your case since there are 10 different material document are there 10 different TR will be there and against each TR you are supposed to create the TO now another complexity is that physically all the material is on the same SU whereas none of the TO is confirmed yet so the SU number is still in runtime. at least one TO should get confirmed so that you can use the top up logic by using the same SU
Looking at the complexity and other operational issue (during picking) I don't suggest that you should go with this approach however you are free to design the system based on your business requirement by taking into consideration of all the pros and cons of system as well as physical operation
Similar Messages
-
Receiving mixed storage unit.
If on one pallet I received 5 different material from vendor. then in that case how can i create one storage unit while creating transfer order for putaway.
Also what will be the case if i receive 10 material on 2 pallet. At what time we do palletisation in sap wm.I received 5 different material from vendor. then in that case how can i create one storage unit while creating transfer order for put away- "If mixing is allowed then you can store more then one material on the same pallet (Storage unit), Check your config for storage type"
2) Also what will be the case if i receive 10 material on 2 pallet. At what time we do palletisation in sap wm. -- "Please elaborate your expectation when you write "what will be the case if i receive 10 material on 2 pallet."
wrt to palletisation
Term "Palletisation" itself self explanatory (Store material on pallet) if the business requirement is to store the material on pallet then you need the perform the palletization activity during inbound, you need to define the quantity per pallet in WM2 view for the material and define the configuration whether more then one material can be stored in the same SU
These are the basic question and my suggestion is to please go through with the SAP WM book "SCM630-WM" to get a detail understanding also refer the existing thread on SCN -
To Create New Storage Unit Automatically
Hi all,
I need some info for creating storage bin. I have a material with 100 KG in a storage unit XYZ. And i want to move 20 KG of 100 KG to new storage unit.
First i call BAPI_GOODSMVT_CREATE with movement type 311 with new quant 20 KG to create a new storage unit. After that i call L_TO_CREATE_POSTING_CHANGE for transfer posting.
But it does no effect to material. It have 311 movement successfully but than it puts the 20 KG to the same storage unit XYZ. How can i move it to a new storage unit ?
Regards,
techmasterIf you only want to do a WM transfer (manually with LT01), you can use L_TO_CREATE_SINGLE.
Best Regards, Dirk -
Unable to confirm transfer order due to error message "enter a storage unit
Hi guys:
I am unable to confirm transfer order due to error message popping up and saying "enter a storage unit", and I tried to search it in whole thread in the forum,it was suggestion to pick up destination storage unit via ls24, but I did went to ls24 and trying to click that line(transfer order) but unable to find the storage unit, so is there another way to fix it?Hi Allen...
Pls check if your Storage Type is SU Active. If yes, then system will create a storage unit according to the setting done for the storage unit management, perhaps in your case you are confirmin TO for the putaway.
Pls confirm and revert
Regards
Shiva -
External Storage units to be entered in the Creation of Transfer Order
Hi Experts,
We have a scenerio where the business creates the Storage units in advance, creates the PO and assigns ithe SU's to the Purchase Order in the custom table. Then creates the Goods reciept using a BAPI which creates a Transfer requirement. Now while creating the Transfer Order for this material document ,
The main issue here is that the businedd needs that if there are any number of Storage units in the Custom table say 3 SU's then the 3 SU's should be entered in the Transfer Order which is created in the bcakground using a BAPI.
please guide us how todo it
Thanks in advanceHello Kirankumar,
It is possible to assign external number ranges for Storage unit, so maintain storage unit number range to assign SU number externally.
Now when you create Transfer order for material document at that time you can assign SU number externally.
Hope this helps.
regards,
Arif Mansuri -
Dear Experts
Please advice which exit / badi / enhancement can be used to derive the same / orginal storage unit date in case when we transfer stocks from one storage location to other.
when the stocks are transfered from one Sloc - WM location to other Sloc WM location, the system consumes the orginal storage unit in the source location and creates new storage unit in the destination location. due to this the ageing of the item in the destination storage bin becomes new and the system does not consider the orginal storage unit number
Can you please help me find a solution for this since the ageing report is being developed and derived from BI
Thanksclosed
-
Problems when creating a transfer order for moving storage units
Hi,
When creating a TO for moving storage units with FM FU L_TO_CREATE_MOVE_SU i got problems when the storage unit consist of 2 items. The message 'Warehouse number does not exist (new selection required)'
is displayed. When i use the FM again after this message then the TO is created correctly.
When i debug the FM for 2 items is see that LEIN-LGNUM is empy en when performing:
PERFORM T300_LESEN(SAPML03T) USING LEIN-LGNUM. and the message E080 is raised.
The perform before this is determining the lein-lgnum (PERFORM LENUM_EINL_CHECK(SAPML03T) USING I_LENUM) but this value isnt passed to the calling program the first time (memory or something????)
Does anyone have a solution for this problem?
Thx in advance.
Kind regards,
John NijburgHello,
I had the same problem today and I've fixed it by calling the FM in a different task (asychronous) .. this way the fugr/internal variables will be loaded again and you won't get this stupid error anymore.
CALL FUNCTION 'L_TO_CREATE_MOVE_SU' STARTING NEW TASK lv_task
In case you need it syncronous use PERFORMING clause together with WAIT UNITL
Hope this helps!
Cristian -
Mixing materials with different Goods Receipt date in the same Storage Unit
Hello everybody,
I´d like to know how FIFO strategy would affect to this example:
Adding boxes from one storage unit (pallet) to another storage unit (pallet). Both storage units have different goods receipt dates, so there is a pallet which has boxes with different GR dates.
Would FIFO make difference among boxes inside the storage unit?. As far as I know, when adding stock (boxes) to a handling unit (pallet), the system keeps the oldest GR date and does not create new quant number for the incoming boxes
Thanks in advance for your helpHi Nagesh,
Thank you for the input. I am receiving Stock from vendor and while creating Inbound delivery i created the Handling Unit and also packed it and i could also post it (PG Receipt). Now when i am creating TO i have that error message. The Storage Location where i am receiving is 9001and i have also maintained the partner Storage location,,, its like this Plant(1000)-SLoc(9001)-Partner SLoc(9002).... now the Storage Location 9002 is not HU managed,, the reason i gave this Storage location is, initially i gave 9001, but system said "Storage Location 9001 and 9001 must have different management systems". So now kindly tell me what is the purpose of the partner Storage location and which storage location should i give, as my partner Storage location across "1000-9001-????" thank you again for ur inputs.
Regards,
Samuel -
L_TO_CREATE_SINGLE - new storage unit is not created by SAP
Hello Friends,
I am using a FM L_TO_CREATE_SINGLE to create transfer order.
But, When I am not passing Destination SU as import parameter, it gives me following error.
"Storage unit XXXXXXX is not consistent with other transfer order data"
This is happening in ECC 6.0. Earlier i was using ECC 5.0 and there was no problem.
How can I get rid out of this problem?
Regards,
RHHi,
Check the long text of the message.
It clearly says that
"Data in the transfer order item (such as the quant number, storage bin or storage type) does not belong to the storage unit number that you entered."
So check to see if the storage unit number you entered is correct.
This seems to be a data issue.
Regards,
Ankur Parab -
Create transfer order for moving storage units
Hello guys,
I need to create transfer order for moving storage units, the same with the transactions LT09, I found this FM 'L_TO_CREATE_MOVE_SU' but no work, somebody have an example for this FM, thanks a lot!Hello,
I had the same problem today and I've fixed it by calling the FM in a different task (asychronous) .. this way the fugr/internal variables will be loaded again and you won't get this stupid error anymore.
CALL FUNCTION 'L_TO_CREATE_MOVE_SU' STARTING NEW TASK lv_task
In case you need it syncronous use PERFORMING clause together with WAIT UNITL
Hope this helps!
Cristian -
Creating a Storage Handling Unit With The Same # As A Storage Unit
Hello dear WM and MM experts,
I'm beginning to use Handling Units and Storage Units. From what I've been reading, it seems like you can have a HU enter the warehouse in the form of a SU with the same ID#. Is that correct? If that's the case, what transaction(s) is used to create the SU using the same ID# as the HU.]
Basically, I have a pallet with product on it and I'd like to know how to have a SU and a HU with the same ID# to be able to handle this pallet in both WM and MM.
Your input is greatly appreciated.Hi Oscar,
In the shared thread reply from Sushant wanjari talks about both the scenario when HU management is active and when HU management is not active
Basically i am summarizing the response provided by Sushant "In the case where HU management is active and you want to carry HU number as SU number. No need to define the SU number range in the system. SAP recommends only activating length conversion for storage unit numbers. Note, that this setting is made at client level, and is therefore valid for other warehouse numbers in the same client.
Inbound delivery for which Putaway TO needs to be created
HU in the inbound delivery
During TO creation system propose the same HU number as SU number
Hope this helps. Please let us know if you need any further input on this -
Hi,
Im doing a transport order and we enter a SU existant. The system display the following error message:
"Storage unit 1000000000 is not consistent with other transfer order data".
We think that we can include in the same SU many materials, storage bin and quant number. It is posible?
Thanks in advance for the help.
Regards
EnzoHi Enzo,
In the WM system SU is always unique errspective of material, but you can store multiple material in one storage unit using mixed SU management consept .
For E.x: Two different materials or Two different batch materials can be placed in a single storage unit in this case two quants will be placed in a storage unit.
for the second question, If the stocsk available for the delivery quantity,it can be create single TO for any number of storage units for all the stocks, in this case quants will be different.
Thanks,
Madhu -
Storage unit Length conversion tcode OMNN
ABAP Guru's
I have a requirement to use different length conversion for SU in different warehoses
HU and SU are both active, Some of the warehouses use SU conversion length as 10 digits and others use 18 digits
as OMNN settings are at client level so we may have to use exit MWMK0001 for our requirement
In OMNN I will use SU conversion exit value as 3 and then through CMOD I will create and activate a project
I will be using first two components of exit MWMK0001 , I am struggling because I can't put break point in this exit .I am new to ABAP so need help Does anyone ever had similar requirement and how it was solved
Thanks
AshHello there,
Please see the following path:
IMG
- Logistics Execution
- Warehouse Management
- Storage Units
- Master Data
- Define Number Ranges
- Conversion exit for storage unit number
You may find the following information.
Conversion of storage unit numbers
SU conversion exit 3 Customer-specific user exit
Length of SU numbers 18
The storage unit number is processed through a conversion exit.
You can find these exits in the domain lenum
CONVERSION_EXIT_LENUM_INPUT
CONVERSION_EXIT_LENUM_OUTPUT
You may also use user exit EXIT_SAPLLVSK_002 to reprogram the length conversion again to plus the leading zeroes for the SU number. In the SAP standard any values for the SU number have to be typed in also leading zeroes.
Regards
Martin -
Beyond being seriously annoyed at an Apple Employee recommended we go the NAS route at an Apple Store no less—only to find it doesn't work for storage OR Time Machine backups of iPhoto (after spending weeks organizing/transferring date, outside of a good deal of coin)—we are now perplexed as how to set up/store based on our needs.
Goals
Create additional storage (iPhoto, iTunes, documents) for the family laptop
Accessible by anyone/device on the home network (iPad, mini iPad, iPhones, etc..)
Would prefer the ability to access this offsite as well
Backup of the laptop
Backup of the storage HD
Ensure we do not lose iPhoto libraries data/files
Here is what I am thinking—need to know if it will work.
Purchase two HDs
Plug them into my base station
Allocate one HD @2T for storage (additional iPhoto libraries, home movies, iTunes libraries, etc...)
Partition the second HD @3T to handle two Time Machine backups
(a) Time Machine of the laptop (up to 1T of backups)
(b) Time Machine of the first HD (up to 2T of backups) - Is this possible?
What I need to know is
Is it possible to partition a HD to Time Machine two backups from different sources—one being a HD?
If this is not a good solution—what is? I am pulling my hair out trying to figure out how to deal with a lot of data related to iPhoto due to the formatting limitations there.While most do not advocate mixing Time Machine backups with other files, I have 3 Time Capsules with files and backups on the same partition and have never had a problem despite doing it for many years. All 3 Time Capsule are set up as NAS devices.
One Time Capsule holds the Snow Leopard partition backup of two computers. The other two each have a backup of the Mountain Lion partition of two computers. Time Machine is set up to alternate between the devices, which it can now do. On these 2 Time Capsules is a copy of the iTunes Library and a copy of the iPhotos Library, which provides a backup for the two. Every so often I manually copy the new files from the primary iTunes/iPhotos library to the backup on the other Time Capsule.
If the computer is on, I can access the computer from my iPad and then access the hard drives and the files.
Hopefully, I have been able to make this clear. -
Split transfer order on the basis of Storage Unit type(SUT)
Hi,
I got one problem and want the solution for that immediately.the problem is as follows:-
The transfer Order needs to be split by quantity according to the quantity per Storage Unit Type.
I have to do this making chages in the SAP standard user Exit EXIT_SAPLL03A_12 in the program SAPML03T.
Eg.One scenario is provided
Scenario 1: Perform transaction MIGO with a movement type 101 for Outbound Delivery 80000201. Enter a quantity of 15 kgs.
the result should be as follows:
Scenario 1: Check TOs created by going to transaction LT22. Enter Warehouse number 200; Storage type 902. Select the Dynamic Selections button and select Transfer order Item. Double click on Material and enter the material number (W075006). The SUT is 5kg so the expected result is for 3 TOs to have been created.
Means one TO got splitted in 3 TOs.
Please provide me the help.Hi Vinay,
This can be done purely through customizing. Please check IMG -> Logistics Execution -> Warehouse Management -> Activities -> Transfers -> Processing Performance Data/Split. You will need to define a sorting profile for TO split in where LETYP (storage unit type) can be used as sorting condition. The sorting profile should then be assigned to defined TO split.
Hope it helps.
Have a nice weekend!
Maybe you are looking for
-
PDF only opens in 64 bit of AI
Hey all, I've had a few PDFs come in that can only open in the 64 bit version of AI. The problem is that we have a script that runs and interacts with AI, that only works with the 32 bit version. Does anyone have any ideas what could cause the .pdf t
-
I recently got an extension cord for my ipad charger and the first time I used it it worked and now when I plug it in to my ipad It doesn't do anything. What do I do?
-
Locate link browser window in Windows 7 and Outlook 2003
Every time I click on a link in an email in Outlook, a "locate link browser" window appears. There's a lot of help on the web to fix it for Win XP, but those steps don't appear to work for Windows 7. Here are some URL's of what I've tried already:
-
Same person as vendor and customer
Dear I have to create the same person both as a customer and vendor. I have done the following settings: Added the number of vendor in customer master & customer in vendor master. Also checked the indicator for clearing in both. I just wanted to know
-
DHTML image scroller with layers
I'm hoping someone here can point me in the right direction. I have a website with a photo gallery and 12-15 photos in each gallery. The thumbnails display 4 at a time left to right. Then I can click the right arrow to see the next 4 or the left arro