Creating more than one serial number for a material upon Goods Receipt

I am trying to configure the system to create more than one serial number automatically for a material and have the equipment record created at the same time with the same number as the serial number. For example using MB1C, receiving a material for a quantity of 2, the Maintain Serial number pop up box appears, selecting the 'Create serial number automatically' , I receive an error message ' Number of numbers to be assigned must be 1
Message no. NR030
Can someone help me with this issue.

I have tried MIGO and get the same error. The Plant data/stor 2. tab of the material master for this particular material is set as follows
Serial no. profile NS01 SerLevel 1 Keep equipment number and serial number synchronous.
Would there be configuration missing?

Similar Messages

Bapi for goods movement to transfer more than one serial number

Dear Gurus
Is their any BAPI with help of which i can transfer More than one serial Number against a single PO.
We are having scenario where material is transfer from one client say XYZ to another client ABC.
Now here the serialised material is transfer angainst diffrent POs with the help of I-Doc from one client to another using movement type 501.
so please help me .Suggest BAPI with the help of wich i can transfer more than one serial number against one PO.
I have already tried the following BAPI.
MB_CREATE_GOODS_MOVEMENT
BAPI_GOODSMVT_CREATE
Regards
Anand Battulwar

Hi ,
Already this BAPI (BAPI_GOODSMVT_CREATE) has a structure to handle multiple serial number (BAPI2017_GM_SERIALNUMBER).
Example of working :
Assume if you have two materials with Qty 2 each ..
You need to enter Item 1 , Serial 1 and next line item 1 , serial 2 after that item 2 , serial 1 and item 2 , serial 2 ..
Do not sort this table , as system take the serial number base on quantity from qty line..
What's the issue you are facing ?
Thanks,
sudhi

Enter more than one personnel number for the same confirmation in CO11N

More than one labor working on Machine work center simultaneously.
So that during production orders confirmation in CO11N we need to enter more than one personnel number for the same confirmation but in CO11N the system allow me to enter only one personnel number.
Note: I can not distinguish between the productions for each labor so that I can not enter separate confirmation for each labor.

Hi,
You can use the User Exit: CONFPP07 Single Screen Entry: Inclusion of User-Defined Subscreens
for this purpose..
Take help from the ABAPer for this enhancement..
Regards,
Siva

How do I create more than one CSS style for text links?

Hello,
Just like the title says, I need help with creating more than one CSS text link style in Dreamweaver CS4. For instance, I want the navigation on the website I'm building to have a different text link style than a link in some part of the body copy. I've been playing with Dreamweaver for a while and can't find any way to do this. If it's even possible to do this, I would really appreciate any help.

Yes it is possible but as you have failed to provide a valid link to your site, I will tell you in general Terms:
1) First create a class or an ID to to your Nav bar;
2) Now style your navbar in such a way that these styles will only apply to your nav bar. To do this, you start your style by doing something like this:
ul#vavigation {.........}
ul#navigation a {.........}
ul#navigation a:hover {.........}
ul#navigation li {.........}
your html code might look like this:
<ul id="navigation">
<li><a href="#">Home</a></li>
etc etc .........................
</ul>
hth

How can I create more than one printer queue for a printer

I would like to have more than one "default" setting for my printer. This is so I can use a 3rd party print utility (fingerprint) to print to a non-airprint printer from my ipad. The utility prints using the default configuration. I don't need to get fancy here. Just "draft B&W' , "normal", and "Color best quality". If I need something else, I can always email the document to my MacBook. The utility has something about a virtual printer, but all I could find about that is that it is used for PDF printing and maybe a workflow.
My technology level: Used to be a programmer, after a decade of retirement, I can't even program an applescript today.

Take a look at this add-on.
https://addons.mozilla.org/en-US/thunderbird/addon/signature-switch/

More than one storage bin for a Material

if a Material is maintained in more than one bin,what stock placement strategy will be be better,normally the client uses Fixed bin but some materials are placed in more than one bin.
Regards,
Tafanza

Hi
If u r using chemical sort of thing, fixed bin will be better.
Or otherwise next empty bin will do.
Regards,
Raman

How can I create more than one different signatures for one account or for one address?

I want to vreate 2 jr more signatures for one account. For example, in different languages, with different text, etc.

Take a look at this add-on.
https://addons.mozilla.org/en-US/thunderbird/addon/signature-switch/

More than one insp. types for a material

Dear all
If two insection types are assigned for a material e.g, for a raw material insp. types 1 and 5 have been assigned.then please guide me from where this material will pick characteristic separately for each.
Following steps i have taken already.
i-maintained material specs for insp. type 1 and insp. plan for insp. type 05.so for type 1 it will pich characterstics from material specs and for insp. type 05,it 'll pick from insp. plan.is it right way.or any better suggestion somonecan give.

Simpy use QP01 like you would normally. If you want to include the material number and plant on the first screen you can. In the header, select the appropriate task list usage for the inspection type.
You should review in SPRO which usages are assigned to which inspection types. You may need to change or modify them from what SAP delivers.
From 6.0
Task list
Usage      Short text                         Assigned insp. types
1     Production
2     Engineering/design
3     Universal                        04, 89
4     Plant maintenance
5     Goods receipt                 01, 05, 07, 08
51     Goods receipt model
53     GR external process.
6     Goods issue                   02, 10, 11,12
7     Returns                          06
9     Material check                09, 15, 16, 17
99     Production Rework
You can change these in SPRO under "Maintain inspection types". You can also add and create your own usages under the "General" section of "Quality Planning" in SPRO.
Craig

More than one class type for a Material

Hi All,
We have a requirement of using a Material for Variant configuration. So we need to assign Class type 300 for that Material.
But that Material is Batch managed. So Class type 023 is already assigned. I am unable to extend the Material to Class type 300.
I searched forum, it is given that, it is possible to maintain different Class types for a Material.
But I tried, I couldn't do that.
Please help me to extend a Material to another Class type.
Regards,
Raja Durai

Hi Raja,
You can maintain different classes for same material.
Go to material master and go to Classification view. Go to Extras->Change class type (F7)
Now you can add a class of different class type.
Please see below snapshots for more details.
Thanks,
Dattatreya N R

MORE THAN ONE PERSONEL NUMBER IN OPERATION OF MO

Dear Experts,
My client is asking for entry of more than one personal number for each operation.
In the Internal Tab of each operation,Now I could able to enter only one personal number.How to enter multiple personal number for one operation .I hope If we enter multiple personal number then it will reflect in confirmation screens also.Pl help guys as the requirement is very urgent
ISWARI

Thank you very much for your immediate suggestions.As told my Mr Subash and Mr Vinay,Iam not getting the tab page Requirements assignment in the Internal tab page of operation.I have tried out all options in WC.I don't know where Iam actually missing something.
More over will it reflect in confirmation through IW42 or IW48.Because my client wants to track the no of hours worked by personal number wise for the particular period.
As told by Mr Bala,by sub-operation wise Iam able to enter the multiple personal number with actual hours in IW42 or IW44.By doing this way in IW47,I able to track no of hours worked by personal number wise for the particular range of posting period.
Iam also checking the route suggested by Mr Thiyagarajan.
I request you all once again to suggest me the absolute correct method
Thanks in advance
Regards
ISWARI

Error while processing XML for more than 5 serial no of a material

Dear Expert
While processing Idoc through some third party system we are getting foloowing error
" No Batch input data for screen RIEQUI21 1000"
As this error is related with serial no. But this happening only when we are using more than 5 Quantity for a material in a sales order and all having different Serial No. and orders having less than 5 quantity of material is running properly.
We are using order type "ORDER 05" in Idoc config in SAP.
Is there any note available in SAP so that we can take more than 5 serial no for a material.
Please revert with your valuable concern.
Regards,
Surendra

Hi Gurus,
Please revert with your responses. If you need any input from my side. please let me know.
Its an issue of high priority.
Thanks
Surendra

Can i create more than one instance for single database?

HI
anybody can tell me how to create more than one instance for single database(without using RAC)?
thanks
Kalanidhi

Anandji,
I sometimes think differently. I also think like what this person is asking..(although I have installed and administering 5 different RAC databases)
The main doubt of mine is that we create multiple instances accessing the same storage area.
Anyway the controlfiles of all instances will have the same information except the instance_names and instance id's.
Hence I always think , why can't it be possible to to create another instance in the same system and point it to a controlfile which is copied from the other instance.
Why can't the same files be shared between the two instances in a same system ?
I know I am thinking a little bit confusing...
Anyway I need to test that also...
Mahesh.

Creating more than one account for a single user

I was wondering, if I creat more than one account for me (the only person that uses my powerbook) is that going overboard? I mean, lets say I am logged into the standard account and I want to learn more about the bash shell and using terminal which I am new to, if I **** something up will the whole system be toast or will only things in that account be messed up? Like could I then just log into my admin account and delete the other messed up one? Or no? My theory was that this was a way of keeping my comp safe from myself, being that I am new to macs and moreso that I am new to the unix side of things and want to start learning the command line without worrying about screwing up my whole system. I would just use the standard account for everyday use (like what I do now) or experiment with terminal, and when I need to download something or change some settings that requires me to be logged in as admin then I would log in and download what I need then log out and use it in the standard account...am I just wasting my time? Is what I am doing any "safer" than just having one admin account and thats it?
Thanks for all the help! It feels good to be a part of the goodguys team =)
Thanks again!

Ghost,
First, I don't subscribe to the "one should not use an admin account" philosophy. For someone who is the owner and main user of any given machine, I see the use of anything but an admin account a bit anal, totally unecessary, and needlessly complicating.
On the other hand, I don't see the need for more than one admin account on any given machine. Yes, I see exceptions to this, and many people favor having a second admin account as a "backup," but I have never had more than one admin account on any of my machines, and have never encountered a situation where one would have helped.
In short, I like the idea of having a "main" admin account that is used most of the time, and then having "secondary" accounts (all non-admin) for any additional users that might log in.
Now, any limitations that apply to you as a GUI user of an account, admin or not, will apply to you at the command line as well. In other words, you can't get yourself into any more trouble at the command line than you can within the GUI. In fact, you might even be better protected at the command line than you are in the GUI. I say this because any action that would ordinarily "elevate" you above the standard capabilities of a non-admin user require the use of "sudo." Avoid the use of sudo, and you can avoid any problems.
That doesn't mean that you wouldn't be able to do something stupid that might wreck an account that contains "all of your stuff," and on which you depend. It is not likely that you would damage your System, but it is entirely conceivable that you might, for example, accidently delete or overwrite your entire HOME folder. Oops!
If you simply don't trust yourself with the command line, a second account might be a good place to experiment. Maybe create it as a non-admin account at first, with the option to change it to an admin account at a later time, when you want to learn how to use "sudo" to do more powerful things. By then, you will understand what not to do. Eventually, you will have the confidence to use the command line in your own account, which will have been an admin account all this while.
Scott

Using more than one phone number on single iPhone for iMessage?

Is it possible to intentionally have more than one phone number listed under Settings > Messages > Send & Receive? I know I've heard of 'glitches' where more than one phone number is shown accidentally and how that is solved (signing out of iMessage and then back in), but if you want to intentionally have more than one phone number listed there (say, the phone number of your own device and also the phone number of your work-related iPhone), is there a method? I'm leaning toward the answer of 'no', but I'm wanting to double check.

robdrage wrote:
I'm not sure, but if you use the same Apple ID for both iphones and register both with messages, then you may be able to go to device one Settings>Messages>Send&Receive and select device twos number as well.
I thought about that. For some reason, I think that I've heard it doesn't work. Sadly, however, I don't have two iPhones with which to test it.

SAP F&R - Creating More Than One Ignore DIF

Hello there,
We're running F&R 5.1, we have one internal Ignore DIF in the system and we want to create another external Ignore DIF. But when we try to create the second Ignore DIF, the system error message shows:
"There must be only one DIF type of I"
There's no way to skip this message, so isn't it possible to create more than one Ignore DIF?
Thanks,
Yang

Hello Yang,
the system allows you to generate internal DIF occurences of DIF type Ignore from both internal and external system.
Please consider that the Internal No. and External No. only refers to the way how to define the DIF occurrence ID. Internally means the system is creating it automatically. External means a user has to type it in.
See also the customizing point about Number Ranges For DIF Occurrences (tcode /FRE/DIFNR).
Kind regards, Rainer

Creating more than one serial number for a material upon Goods Receipt

Similar Messages

Maybe you are looking for