Creating more Workbench requests

Hai all,
I have a question. I am making several changes in SAndbox. For each changes, the system is asking for a change request and I am creating a new one every time. Is this a good practise or does creating more no. of requests create any problem in future? May be in transport to QA and then to Production!
Thanks.

Hi Visu,
You can do it..
Right click on the request(1 say ) in SE09 --> Say Include Objects --> Select another request(2 say) ..
This will include all the objects of other request(2) in the first request(1).
Also see the option to Merge requests there if that is what you want to do..
Ashish.

Similar Messages

New Requests created are in 'Local Workbench Request' in R3 Development

Hello ,
I am going to transport data sources from R3 Dev to R3 Quality.
I have successfully transported the package (which is created in SE80 ) and Application componenet hierarchy and all active version data source RSA6 to R3 Quality .
I have also checked that the package , application transport hierarchy and data sources in R3 Quality.
Now when I tried to create new requests for LBWE data sources ( maintain extract structure , generate data source) , I am getting a message Create Customizing Request , So I created Customizing Request and then I am getting message to create Local Workbench request. If I create local workbench request then it can not be imported to R3 Quality.
Client R3 is open SCC4 settings are 'Automatic Recording of Changes ' and 'Changes to repository and cross client customizing are allowed'.
I am not getting why the system is not asking me to created 'Workbench Request'.
Thanks and Regards ,
Amol Kulkarni

Hello Viren ,
Local Transport Request are not transportable even if we release them.
I have resolved the issue in the below way ,
I went to SE21 and entered the package name as 'YBW' and then clicked on change .
Then Click on properties tab and then select Transport layer as SAP and save.
Go to SE80 and select package and in dictonary Objects drill down view ...right click on any selected view name ...go to other function and click on Write Transport Entry...mention request from Own Request tab which was earlier as Local Workbench Request.
Then go to SE10 and double click on request and go to properties tab ...there select Target Group as
R3 Quality Server name and save it.
Transport the package to R3 Quality.
Henceforth whichever request u create will be of type 'Workbench Request'.
go to SE10 and cross check that your request is now Workbench Request,
Regards ,
Amol K.

Merge workbench request and solman request

I have created a workbench request outside solman, now a solman request is created for that workbench object. how to merge the old request with solman request?
thanks

Hi sudeer,
you can do this by logging into Development system and open the solman TR through Se09 and right click - you will have many options wherin u can select Include Object / merge request and then provide the TR task number created outside solman. Now your solman TR will have the object assigned under it and can be moved to QA and Production through solman.
Hope it solves your problem.
Reward points for helpful solution.
Regards,
Imran

Can i store text elements created in so10 in workbench request?

hi
i have created some text elements in development server and want to transport it to test. i have used the program RSTXTRAN. it has created a customising request now, is it possible that it can be stored in a workbench request?

Hi,
No, it should be under Cusotmizing request.
This is because of the following diff:
In<b> workbench request</b> .... it can be programs(repository objects) and cross client data (ie not specific to one client).
Changes to client-specific Customizing objects are recorded in <b>Customizing requests.</b>
Best regards,
Prashant

Workbench request when creating new form routine in TMG

Dear SCN,
I have build a TMG for a custom table ZSPFLI_1 with fields.
Field Name          Data Element
MANDT               S_MANDT
CARRID              S_CARR_ID
CONNID              S_CONN_ID
COUNTRYFR       LAND1
CITYFROM         S_FROM_CIT
DOC                   ERDAT
ERNAM              ERNAM
TIME                   UZEIT.
I have created a form routine. ZCREATE_ENTRY to auto populate DOC, ERNAM, TIME.
FORM ZCREATE_ENTRY.
ZSPFLI3-DOC = SY-DATUM.
ZSPFLI3-ERNAM = SY-UNAME.
ZSPFLI3-TIME = SY-UZEIT.
ENDFORM.
The TMG and Function group and table are saved and activated as local objects.
I want to add another form routine that will modify the DOC, ERNAM, TIME for any record that is edited by TMG for the custom table ZSPFLI_1.
Every object was saved as local object.
The problem is when I am creating a new form routine, it is asking for workbench request and I don't have the option to save it as local object in the dialog box.
Regards,
Soumen Das.

Dear SCN,
Is the issue due to the fact that we can only add form routine once when defining the TMG. I think this should not be the limitation as fields may be added afterwards, and this may require to modify the form routine events.
Regards,
Soumen.

Difference between workbench request and customizing request in transport

Hi Experts,
I am new to SAP BI7 work. i am having basic doubt in Transort request creations
ususally we create the requests to transport the objects from Development system to further systems.
can anyone please clarify me, what is the main defference between the Workbench request and Customizing request.
Thanks and Regards
Mrudula

Hi ,
The Transport Organiser maintains Change Requests.These requests record the changes made to the repository and customizing objects.Based on that objects changed they are
1)WorkBench Request & 2) Customizing Request.
Workbench Requests are those that involve changes to cross-client Customising and Repository Objects. The objects are independent of the client.Hence the requests are used for transferring and transporting changed Repository objects and changed system settings from cross-client tables.
Customizing Requests involve changes recorded to client-specific Customizing objects .These client specific requests are used for copying and transporting changed system settings from client-specific tables.
Refer this links http://www.allinterview.com/showanswers/57910.html
customising and workbench request
Difference between Customizing request and Workbench request
and many more threads available on this.
Regards,
Rahul.

Single workbench request for CONSUMER PROXY in crm 7.0.

Hi all ,
I have a problem related to "consumer proxy" in sap crm 7.0 release. In our system , we have several proxies (existing) for consuming inter system web services (WSDL's) which were generated from SE80 , client proxies, wizard.
As we know , at the very first time of creation , the workbench request holds both the structure , class and object of the proxy ,but if afterwards , the proxy is regenarated for changed structure in WSDL , then that workbench request only holds the regeneration request , doesnt hold the base structure.
In our case , in those old proxies , there are so many requests .in some of it , many cross object requests are there , so we are facing problems to transport these proxies to a blank client(newly created).
So my question is
IS THERE ANY WAY TO CREATE ONLY ONE WORKBENCH REQUEST (MIGHT BE FROM SE80) FOR THOSE EXISTING PROXIES , THAT THEY HOLD THE STRUCTURE AND THE CHANGED STRUCTURE ALSO FOR INDIVIDUAL.
THANKS IN ADVANCE.
ARNAB MUKHERJEE
INTEGRATION DEVELOPER.

Hi,
Refer the following to get the understanding the Equipment download to CRM.
You define the default settings for replicating equipment in the IMG activity: Customer Relationship
Management -> Master Data -> Installed Base -> Replication of Equipment from SAP R/3 Customer
Service -> Define Default Settings for the Equipment Replication.
For more information about the integration of different systems, see the SAP Library under mySAP
Customer Relationship Management -> Architecture and Technology -> Business Integration -> CRM
Middleware.
The Business Add-In : Business Add-In: Equipment Upload (CRM_EQUI_LOAD) can be used to
flexibly enhance the data transfer and validation in SAP CRM. The Add-In offers comprehensive options
for influencing the mapping between equipment and individual objects
Also refer to the following notes:
1. Note 627279 - Serial number & configuration download
2. Note 637173 - Equipment download/delta synchronization
Hope it helps.
Regards,
Rajiv

ChaRM: Creating multiple transport requests

Hi Team,
I am working with Sol MA n Charm urgnt crction (SDHF). I am executing the action "Create Transport Request". The pop-up appears to create the tranpsport request. I have selected both workbench and customizing requests. The transport request got created successfuly in the ECC DEV system. Now i am trriggering the action "Create New transport request". The same pop-up appears. Now i am selecting, ustomizing requesting check box. The action is executed successfully. But the transport has been NOT created in satellite system. Why it so? Can't we have two opencustomizing requests for urgnt corction (SDHF)?
Or any configuration required to enable this?
Regards
PSK

You cannot have more than one open request for the urgnt correction.if u want to create new request , you should release the existing one You can always create tasks in the open TR.
Regards,
Sam

Customizing request & Workbench request

Dear all,
What is the differance between Customizing Request & workbench request?

Hi,
Workbench Requests
When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
Workbench requests record changes made to ABAP Workbench objects.
There are local and transportable Workbench requests. (Local Workbench requests have the target system <space>.)
The package of the object and the transport route settings in the Transport Management System determine whether changes are recorded in a local or a transportable Workbench request.
Customizing requests
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
Changes to Customizing settings are recorded in Customizing requests.
When you release the requests, the current status of the recorded settings is exported, and can then be imported into the consolidation system and, if necessary, into subsequent delivery systems.
The client settings determine whether
o changes to the Customizing settings are possible
o the changes are recorded
When you create Customizing requests, the transport target is automatically assigned the standard transport layer by the R/3 System.
Regards,
Satish

Error when creating a travel request with Advance amount

Hi Gurus,
When I create a travel request with an Advance amount and try to save the same, the system throws up an error msg : "Trip country does not exist in the system (T005).
However, it allows me to create the travel request without this error if i dont enter any advance amount in the travel request.
I checked the tables V_T706L and V_T706O and found my trip county to be existing.
Regards
Prakash

Hello Prakash,
The following are the prerequisites for transferring trip costs to accounting. In other words when you try to create and save a travel request with advance you are involving accounting entries and therefore the following needed to be checked:
1.Travel Management and Accounting are both at Release 4.5A. If at least one of the systems
has a release level lower than 4.5A, follow the instructions in Customizing for ALE.
2. For payment to be effected, vendor accounts must exist in Accounting for the respective
personnel numbers.
3. The following Accounting tables must be replicated in the Travel Management System using
Customizing transports:
Company Codes (T001)
Countries (T005)
Input Tax Codes (T007A, T007S)
Document Types (T003)
4. The transfer of settlement results
More relevant in your case would be the point 3. Countries(T005) not defined in TM.
Hope the above provided you more information.
Rgds
CONMJI

PROCEDURE PROBLEM - Exact Fetch Returns More Than Requested Number of Rows

Here is my procedure:
CREATE OR REPLACE PROCEDURE question4
( cust_first IN customer.custfirstname%TYPE,
   cust_last IN customer.custlastname%TYPE,
   customer_no OUT customer.customerSsn%TYPE,
   cust_address OUT customer.address%TYPE,
   loanID OUT loan.loanNo%TYPE,
   application_date OUT loan.appdate%TYPE,
   remaining_payments OUT loan.remainingpaymentsdue%TYPE,
   loan_amount OUT loan.loanamount%TYPE,
   loan_term OUT loan.loanterm%TYPE,
   interest_rate OUT loan.interestrate%TYPE,
   monthly_payment OUT loan.monthlypayment%TYPE)
   AS
BEGIN
SELECT customerssn, address INTO customer_no, cust_address FROM CUSTOMER WHERE custfirstname= cust_first AND custlastname = cust_last;
SELECT loanno, remainingpaymentsdue, loanamount, loanterm, interestrate, monthlypayment, appdate INTO loanID, remaining_payments, loan_amount, loan_term, interest_rate, monthly_payment, application_date FROM LOAN WHERE customerSsn = customer_no;
EXCEPTION
    WHEN OTHERS
    THEN
    NULL;
END;Here is the anonymous block showing the use of my procedure.
SET SERVEROUTPUT ON
DECLARE
customer_number customer.customerSsn%TYPE := NULL;
customer_address customer.address%TYPE := NULL;
loan_number loan.loanNo%TYPE := NULL;
app_date loan.appdate%TYPE := NULL;
rem_payment loan.remainingpaymentsdue%TYPE := NULL;
l_amount loan.loanamount%TYPE := NULL;
l_term loan.loanterm%TYPE := NULL;
i_rate loan.interestrate%TYPE := NULL;
m_payment loan.monthlypayment%TYPE := NULL;
view_customerSSN NUMBER;
view_address VARCHAR2(50);
view_loanID NUMBER;
view_date DATE;
view_remaining_payment NUMBER;
view_loan_amount NUMBER(8,2);
view_loan_term VARCHAR2(10);
view_interest_rate FLOAT(20);
view_monthly_payment NUMBER(8,2);
BEGIN
question4 ('Tim', 'Thompson', customer_number, customer_address, loan_number, app_date, rem_payment, l_amount, l_term, i_rate, m_payment);
IF (customer_number IS NULL OR customer_address IS NULL OR loan_number IS NULL OR app_date IS NULL
OR rem_payment IS NULL OR l_amount IS NULL OR l_term IS NULL OR i_rate IS NULL OR m_payment IS NULL) THEN
     DBMS_OUTPUT.PUT_LINE ('NULL VALUE');
ELSE
    view_customerSSN := customer_number;
    view_address := customer_address;
    view_loanID := loan_number;
    view_date := app_date;
    view_remaining_payment := rem_payment;
    view_loan_amount := l_amount;
    view_loan_term := l_term;
    view_interest_rate := i_rate;
    view_monthly_payment := m_payment;
    DBMS_OUTPUT.PUT_LINE ('CUSTOMER NO : ' || view_customerSSN);
    DBMS_OUTPUT.PUT_LINE ('CUSTOMER ADDRESS : ' || view_address);
    DBMS_OUTPUT.PUT_LINE ('LOAN NO : ' || view_loanID);
    DBMS_OUTPUT.PUT_LINE ('LOAN APPLICATION DATE : ' || view_date);
    DBMS_OUTPUT.PUT_LINE ('REMAINING PAYMENTS : ' || view_remaining_payment);
    DBMS_OUTPUT.PUT_LINE ('LOAN AMOUNT : ' || view_loan_amount);
    DBMS_OUTPUT.PUT_LINE ('LOAN TERM : ' || view_loan_term);
    DBMS_OUTPUT.PUT_LINE ('INTEREST RATE : ' || view_interest_rate);
    DBMS_OUTPUT.PUT_LINE ('MONTHLY PAYMENT : ' || view_monthly_payment);
END IF;
END;
/Error Message:
Error report:
ORA-06550: line 21, column 3:
PLS-00306: wrong number or types of arguments in call to 'QUESTION4'
ORA-06550: line 21, column 3:
PL/SQL: Statement ignored
*06550. 00000 - "line %s, column %s:\n%s"*
**Cause: Usually a PL/SQL compilation error.*
**Action:*
What is the problem here? Could you anyone help me?
Thanks for your help from now on.
Have a beautiful day...
Edited by: RobertPires on May 1, 2011 5:13 PM
Edited by: RobertPires on May 1, 2011 8:19 PM

Thanks for your help, Sir. As you see it as above, I fixed the order of parameters, but since I would like to display multiple records, my procedure did not work properly and I got this error message:
Error report:
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "S4048958.QUESTION4", line 20
ORA-06512: at line 21
*01422. 00000 - "exact fetch returns more than requested number of rows"*
**Cause: The number specified in exact fetch is less than the rows returned.*
**Action: Rewrite the query or change number of rows requested*
I guess I need to create a cursor in my procedure, but I dunno how. Could you give me some suggestion for this please?
Thanks again...

MSS Error in creating new requisition request

Hi All,
I am getting a error when I try to create a new requisition request .
I had looked in to the below mentioned thread but i am not clear what I need to do ?
MSS Error in creating new requisition request
Can you please explain me in details what I need to do to overcome this error?
I am also getting the error saying "Hiring manager Personnel number is required " when I try to create a new requisition request for hiring process?
According to the above mentioned thread I had created a Position and assigned a personnel number to that position. I am not sure what is mean by :
You have to maintain the one more manager position (i mean requister line manager) and give the proper reporting relationship and ren the program RCF_CREATE_USER, it automatically creates the CP relationship.
What the report "RCF_CREATE_USER" will do??
Thanks for your help in advance.
Thanks,
Greetson

Hello Deepak Kumar Sharma ,
Thanks for your reply. My main concern is to overcome the error Ia m getting. I know about the functionality of this program. the reason why I had asked about the functionality of this report is because of this thread :
MSS Error in creating new requisition request
In this thread they had mentioned after creating a position and run this report the "hiring manager personnel number required" error is solved. Thst is the reason. Hope you understand my situation.
I had tried this by creating this position and run that report as well.
Let me know if you have any questions.
Thanks,
Greetson

ORA-01422 exact fetch returns more than requested number of rows on invoice

Hello developer,
Current I m facing problem ORA-01422 exact fetch returns more than requested number of rows in Invoce Standard form when we select PO_Default invoice type for some specific PO Number not for all. I m not able to handle the error bcoz im new in oracle apps. it's urgent for user requirement. Plz guide me how to take approch to handle the situation.........
select Po_Default invoice type=>enter po number=>press ok button=>got error ORA-01422
I got query from POST_QUERY TRIGEER like
function get_po_number (l_po_number varchar2,l_vendor_id OUT number) return number is
l_po_header_id number;
--Bug fix:1096002
--Removed the function call UPPER from the WHERE clause so that the query
--becomes case sensitive.
-- BUG 2519682 vendor_id added in the Select statement and futher in the fetch statement
cursor po_number_cursor is
SELECT po_header_id,vendor_id
FROM po_headers
WHERE type_lookup_code IN ('STANDARD', 'BLANKET', 'PLANNED')
AND approved_flag = 'Y'
AND segment1 = l_po_number
-- Bug 2289727. Enhanced Matching Controls to Finally Closed POs
AND (NVL(closed_code, 'X') <> 'FINALLY CLOSED'
OR :parameter.show_final_closed_po_flag = 'Y')
AND PCARD_ID IS NULL; --bug4627502
/* Commented out since this is not relevant even if executed.
AND (segment1 LIKE SUBSTR(l_po_number, 1, 2) || '%' OR
segment1 LIKE SUBSTR(l_po_number, 1, 1) ||
SUBSTR(l_po_number, 2, 1) || '%' OR
segment1 LIKE SUBSTR(l_po_number, 1, 1) ||
SUBSTR(l_po_number, 2, 1) || '%' OR
segment1 LIKE SUBSTR(l_po_number, 1, 2) || '%' );
begin
open po_number_cursor;
fetch po_number_cursor INTO l_po_header_id,l_vendor_id;
close po_number_cursor;
return(l_po_header_id);
end get_po_number;
plz help me how to resolved this issue it's urgent.
thanks in advance.........

This bug is documented in the following note on metalink.oracle.com
APXINWKB - Creating PO Default Invoice Errors with ORA-01422 Exact Fetch Returns More Than Requested Number Of Rows [ID 946578.1]
The solution is to apply patch 8765847.
Hope this answers your question,
Sandeep Gandhi

URGENT IN The PL/SQL code..ORA-01422: exact fetch returns more than request

Hi All,
I am using the Oracle Streams to replicate the data...
Below is the procedure
CREATE OR REPLACE PROCEDURE proc_test(in_any sys.anydata)IS
lcr sys.lcr$_row_record;
rc pls_integer;
v_type varchar2(20);
col_1 sys.anydata;
lcr_usercountry varchar2(20);
TRANS varchar2(20);
BEGIN
rc:=in_any.GetObject(lcr);
v_type:=lcr.get_command_type();
col_1:=lcr.get_value('NEW','USER_COUNTRY');
rc:=col_1.GetVarchar2(lcr_usercountry);
select user_country into TRANS from test.TESTREP where USER_COUNTRY=lcr_usercountry;
IF (TRANS=lcr_usercountry and TRANS='USA')
THEN
insert into strmadmin.history_row_lcrs VALUES (SYSDATE, lcr.GET_SOURCE_DATABASE_NAME(), lcr.GET_COMMAND_TYPE(),
lcr.GET_OBJECT_OWNER(), lcr.GET_OBJECT_NAME(), lcr.GET_TAG(), lcr.GET_TRANSACTION_ID(), lcr.GET_SCN(),
lcr.GET_COMMIT_SCN,lcr.GET_VALUES('old'), lcr.GET_VALUES('new', 'n'));
lcr.EXECUTE(true);
END IF;
END;
The procedure executed successfully, but the data is not replicating...
I get the below error ORA-01422: exact fetch returns more than request in the dba_apply_error view.... because the query in the above procedure which am using returns more than one value ...select user_country into TRANS from test.TESTREP where USER_COUNTRY=lcr_usercountry;
may be I need to use the cursor for this....
Can anyone Please advice me writing the cursor ...
Thanks in Advance..

Got the solution ....
Thanks..

Find workbench request for existing report

Hi
Someone created an Report for me in order to develop some new functionalities.i have to transport it now in the test system but i do not know how i can find the workbench request for it or how i can save it in another workbench request.
thanks

Hi Seba ,
You can find the workbench request for the report by displaying the report and following this path in the menubar.
Utilities > version > version management.
If you want to add this request into another request goto SE01 and there you will find the icon for adding the objects for your request.
Regards,
Anuj

Creating more Workbench requests

Similar Messages

Maybe you are looking for