Creating Multiple Ringtones from 1 song

Does anybody know whether or not we'll be able to make multiple ringtones from one song with out having to pay 99 cents for each one? i.e. you buy one song, +another one bites the dust+, and then you want to make 4 different ringtone from the same song, do we have to pay for each one, even though they're from the same song technically?

Hi Greg,
Many thanks for your answer. And yes this would be a solution. However I just simplified my case as the decision to create an second record and where to post is depending on more than 1 field in the source.
But I will keep it in mind, because I also can opt for a solution to store data differently in BPC fac-tabels which will help me to use script logic.
If it is not possible to create multiple records from a single records in the standard functionality in the Transformation and/or Conversion file, I have to create a custom DTSX or change my way of storing data.
Anyone else who is having an alternative idea like Greg came up with?
Please let it know!
Best regards,
Johan

Similar Messages

I followed the instructions on creating a ringtone from a song in my library. It's not creating my 40 sec ringtone in my library to drag to ringtone section. Pls help

I followed the instructions on creating a ringtone from a song in my library. It's not creating my 40 sec ringtone in my library to drag to ringtone section. Pls help

Okay, so here is what happend.
I deleted the song from my library since iTunes would not allow me to delete it from the purchased item list. Then i pluged my phone into my computer and got this message:
"iTunes has found purchased items on the iPhone “Paul’s iPhone” that are not present in your iTunes library. Do you want to transfer these items from this iPhone back to your iTunes library?"
I selected "Transfer" and it showed up with a dotted circle next to it where a a song number would normally be displayed. Then fter a couple of minutes the dotted circle magically dissapered and was replaced by a number just like all of the other songs in my library.
And best of all...it plays!!!
Thanks for you help!!

Creating Multiple POs from the shopping cart

Hi
I have a requirement to create multiple POs from shopping cart. we are in SRM 7.0 I have implemented the BADI BBP_SC_TRANSFER_BE GROUP_PO method. modified group_1 field with 1 and Doc_type with custom document type
and udpate the change parameter CT_PROC_ITEM with the above changed data for each line item.
But purchase order always taking original document type and its number range only.
Please help me in this regard,
Regards,
Rama.

Hi,
Thanks for your reply. I have implemented the BADI BBP_BS_GROUP_BE method GROUP_PO_BACKEND. I modified BE_DOC_TYPE with the custom document type and REFNUMBER as the group number .
But it is generating number range for the original document type only. when i debug the code i found that it is taking original document type (which is hardcoded contant value mentioned in the code when number range is initial).
Please suggest me after grouping the line items with document types and REFNUMBER how to assign number ranges for each group of line items.
Regards,
Rama.

Create multiple PDFs from multiple files

Hi everyone
I'm trying to use the "Create multiple PDFs from multiple files" function in Acrobat 9 Pro (version 9.4.6) to create about 100 PDFs from InDesign CS5 files. Theoretically this would do the trick for my purpose. BUT: When running the function, it does not use the CS5 InDesign (version 7.0.3), but tries to open the files with InDesign CS3. Of course this does not work. We, as a professional working agency, have installed CS3, CS4 and CS5. Even with making the InDesign CS3 .app invisible an pushing it into the garbage bin during the process did not work. Acrobat still wants to access InDesign CS3. It is not possible to downgrade the files to CS3 files, for there are special (i.e. interactive) functions which only work in CS5. It would be more work than creating the PDFs manually, anyways.
Does anyone have similar issues? Any ideas how to solve the problem?
Thanks in advance.
Thinka

OK, cool, I found one, which seems to work just fine.
http://www.kahrel.plus.com/indesign/batch_convert_cs3.html
found here:
http://forums.adobe.com/message/3712434#3712434
Thanks for the hint!

How do I create a playlist from songs in other playlists?

Before updating my iPhone 5 to iOS 7, I used to be able to create a playlist by choosing songs that were already in other playlists. Now, when I click on Create Playlist, the only options I have on the bottom of the screen are to choose from Songs, Artists, Songs and Composers. I want to create a playlist from songs that are in my other playlists, such as Purchased or Favorites, for example, instead of scrolling through a couple thousand songs to find (and remember) the ones I want. What I can do bring that option back? I've looked in my settings and haven't found anything I can do about it. Any knowledgable people in this area, please suggest solutions.

In list view click on the far left column which allows you to drag to desired play order.

How do I create a ringtone from my music already on my iTunes database

How do I create a ringtone from my music already on my iTunes database

take a look at the link gives you detailed instructions to create ringtone and sync to yoru phone
http://www.ehow.com/how_2160460_custom-iphone-ringtones-free.html

Creating multiple records from 1 record in the source file for Import DM

Hi Experts,
Today I am working on an interface/import where I want to get the following result:
Source file contains a records like:
Account, Entity, DriverX
Sales,EntityA,ZZ
The BPC appset contains the 2 dimensions Account and Entity next to CostCenter dimension. The DriverX field in the source file is just additional information in the source file. However based on this DriverX we need to determine what CostCenter to choose but we also need to have the same record assigned to a second record in BPC.
Following my example, based on DriverX value I need to create 2 records:
Account, Entity, CostCenter,
Sales,EntityA,CC1
Sales,EntityA,CC2
I don't have a problem assigning the record to 1 CostCenter based on DriverX value but I have a problem creating my second record. Does any of you have had the same "challenge" and if so would you like to share the solution for this?
Best regards,
Johan
PS: I am working on SAP BPC, version 7.0 Microsoft version.

Hi Greg,
Many thanks for your answer. And yes this would be a solution. However I just simplified my case as the decision to create an second record and where to post is depending on more than 1 field in the source.
But I will keep it in mind, because I also can opt for a solution to store data differently in BPC fac-tabels which will help me to use script logic.
If it is not possible to create multiple records from a single records in the standard functionality in the Transformation and/or Conversion file, I have to create a custom DTSX or change my way of storing data.
Anyone else who is having an alternative idea like Greg came up with?
Please let it know!
Best regards,
Johan

Creating multiple links from one map image in Flash CS4

I have been tasked with creating multiple links from one map image using flash. Each link would go to the main website page with that location. I assume I could create a button for each location on the map but not having a lot of experience any help / tutorial you know of would be super helpful.. Thanks! Not looking for someone to work me thru it but a little guidance would be great!

If I was to answer the problem, I would be giving you what you asked not to be given... the solution. So I'll suggest that you start by researching the getURL() function. That is what AS2 uses for opening web pages.
As for coding a button, I'll recommend the following article for you... it will explain the proper approach to coding a button, which will give you an advantage over others who don't follow it, but instead use the way the article says not to.
http://www.adobe.com/devnet/flash/articles/as_bestpractices_04.html
Google is one of the best resources available for learning how to do things with Flash--it's the first place I go when I have a wondering. In general, if you type in the right keywords, you get fairly good search results. In your case, combinations of "AS2", "button", "getURL", "tutorial" would probably work well.

How to improve the speed of creating multiple strings from a char[]?

Hi,
I have a char[] and I want to create multiple Strings from the contents of this char[] at various offsets and of various lengths, without having to reallocate memory (my char[] is several tens of megabytes large). And the following function (from java/lang/String.java) would be perfect apart from the fact that it was designed so that only package-private classes may benefit from the speed improvements it offers:
    // Package private constructor which shares value array for speed.
    String(int offset, int count, char value[]) {
     this.value = value;
     this.offset = offset;
     this.count = count;
    }My first thought was to override the String class. But java.lang.String is final, so no good there. Plus it was a really bad idea to start with.
My second thought was to make a java.lang.FastString which would then be package private, and could access the string's constructor, create a new string and then return it (thought I was real clever here) but no, apparently you cannot create a class within the package java.lang. Some sort of security issue.
I am just wondering first if there is an easy way of forcing the compiler to obey me, or forcing it to allow me to access a package private constructer from outside the package. Either that, or some sort of security overrider, somehow.

My laptop can create and garbage collect 10,000,000 Strings per second from char[] "hello world". That creates about 200 MB of strings per second (char = 2B). Test program below.
A char[] "tens of megabytes large" shouldn't take too large a fraction of a second to convert to a bunch of Strings. Except, say, if the computer is memory-starved and swapping to disk. What kind of times do you get? Is it at all possible that there is something else slowing things down?
using (literally) millions of charAt()'s would be
suicide (code-wise) for me and my program."java -server" gives me 600,000,000 charAt()'s per second (actually more, but I put in some addition to prevent Hotspot from optimizing everything away). Test program below. A million calls would be 1.7 milliseconds. Using char[n] instead of charAt(n) is faster by a factor of less than 2. Are you sure millions of charAt()'s is a huge problem?
public class t1
    public static void main(String args[])
     char hello[] = "hello world".toCharArray();
     for (int n = 0; n < 10; n++) {
         long start = System.currentTimeMillis();
         for (int m = 0; m < 1000 * 1000; m++) {
          String s1 = new String(hello);
          String s2 = new String(hello);
          String s3 = new String(hello);
          String s4 = new String(hello);
          String s5 = new String(hello);
         long end = System.currentTimeMillis();
         System.out.println("time " + (end - start) + " ms");
public class t2
    static int global;
    public static void main(String args[])
     String hello = "hello world";
     for (int n = 0; n < 10; n++) {
         long start = System.currentTimeMillis();
         for (int m = 0; m < 10 * 1000 * 1000; m++) {
          global +=
              hello.charAt(0) + hello.charAt(1) + hello.charAt(2) +
              hello.charAt(3) + hello.charAt(4) + hello.charAt(5) +
              hello.charAt(6) + hello.charAt(7) + hello.charAt(8) +
              hello.charAt(9);
          global +=
              hello.charAt(0) + hello.charAt(1) + hello.charAt(2) +
              hello.charAt(3) + hello.charAt(4) + hello.charAt(5) +
              hello.charAt(6) + hello.charAt(7) + hello.charAt(8) +
              hello.charAt(9);
         long end = System.currentTimeMillis();
         System.out.println("time " + (end - start) + " ms");
}

Create ringtone from song from old iTunes account?

I transferred/merged my two iTunes accounts into one, and have had no problems all year. Now I want to create a ringtone but when I go to "Buy" it, iTunes tells me I cannot do it with a song I purchased under a different iTunes account (my former email address). Help! I bought the song years ago on iTunes, but now that I have a different account name, I cannot create a ringtone with that song?

I tried that first, but I cannot make a purchase while logged in under my old ID & password, I can only view/access my songs and look around in the store...

How do I create custom ringtones from mp3 files in itunes 11?

I've upgraded to the iPhone 5 from Blackberry, and I have several custom mp3 ringtones I would like to assign... and can't. How do I do this in iTunes 11?

You would have sorted it out by now.
Anyway,
1. Go to EDIT =>REFFERENCE
2. Under General, tick TONES, then you will be able to see TONES folder...
To create ring tone from mp3.
1. Make sure your mp3 file playback duration is about 30 sec or less.
2. Add it to your library as you do with music.
3. Under MUSIC folder, select SONGS
4. Find the mp3 file you want for ringtone, right click it and find CREATE AAC VERSION
5. OPEN window explorer, browse to MY DOCUMENTS/MY MUSICS (XP) or Library/my music (Win 7), there should be iTunes folder in there, find the mp3 file... and change the file extension from [.m4a] into [.m4r]
6. Back to iTunes, add [filename.m4r]
Now you should have rinetone under TONES folder in your iTunes.
Cheer

Acrobat 9 Pro - Batch Create Multiple Files from InDesign CS5 files

When attempting to batch create PDFs from Indesign CS5 files using Acrobat Pro 9's File>Create PDF>Batch Create Multiple Files ... option the operation fails with the error 'Could not find the application that created this file: [path to file] Please select a file created by an application that resides on your computer.' as shown in the screenshot below:
Acrobat 9 Professional was bundled with Creative Suite 5 Design Standard so shouldn't this work? My machine is running OS X 10.6.7, Acrobat Pro 9.44 and InDesign CS5 7.04.
Any help to solve this issue would be most gratefully received - this feature had previously saved me a lot of time on my old machine with 10.5.8, Acrobat Pro 9 and CS4.

I have uploaded the files and shared them. These are the links
Grade 11 Maths Standardisation Project Paper 2 2013.doc
https://files.acrobat.com/preview/9694310d-ca7f-4919-883d-c53b36215d89
Grade 11 Maths Standardisation Project Paper 2 Analysis Grid 2013.doc
https://files.acrobat.com/preview/97da9e5f-d412-4d25-9bbc-d1a525d90826
Grade 11 Maths Standardisation Project Paper 2 Diagram Sheet 2013.doc
https://files.acrobat.com/preview/f50dd62e-af04-4060-85c5-fa81ce6803d8
Grade 11 Maths Standardisation Project Paper 2 Formula Sheet 2013.doc
https://files.acrobat.com/preview/7fc6007b-aaa6-4d65-9a8c-bf99818474a5
Grade 11 Maths Standardisation Project Paper 2 Marking Guidelines 2013.doc
https://files.acrobat.com/preview/b3a715bb-3683-48df-b0ec-3d17442275be
Grade 11 Maths Standardisation Project Paper I Analysis Grid 2013.docx
https://files.acrobat.com/preview/ab62e6b6-0261-434e-8a2f-382f74335685
The first file is the problem file. If you create this file separately, Acrobat will convert it perfectly. But "Batch create multiple files" and the graphics are deconstructed on page 8

Creating multiple reports from one query

Hello Everyone
I are designing crystal reports where 1 query is built for 1 report / 1 sub-report. To improve overall efficiency of reports, I am trying to design multiple reports/ subreports from the same query. All the sub-reports belong to the parent report and they are very similar to each other.
For example: in Webintelligence, we can just create 1 data provider and pull multiple reports from it and display it in multiple tabs.
Can we do the same thing in Crystal reports??
Please advice.
Thanks
Edited by: Devesh Modi on Jun 9, 2010 11:19 PM

Hello,
If you are using WEBI then you have access to BOE. Create a Universe and publish it to the Repository and then you can use it as your data source.
But I think what you are asking is how to query the DB once? Not possible, each subreport will run the query each time it's viewed.
What you may want to do is create a Stored Procedure and get all of you info into one data collection and not use subreports, use grouping to emulate subreports. As an Example ....
You may want to create a case in Service Market Place since you have BOE and work with a Report Design Rep to help you work out the best solution for you.
Thank you
Don

Creating multiple PDFs from an xml form

Hello--
I am a LiveCycle Designer beginner, so please bear with me.
I'm hoping to automate the creation of multiple PDFs from within a LiveCycle XML form I created. We have a database with vendor contact information. Each vendor could have multiple records within our database (currently they range from 2-60). We currently send to a pointperson at each vendor an Excel spreadsheet that contains all the records associated with that vendor. That person then modifies, adds and deletes the records in that spreadsheet. We then input those updates into our database.
We recognize that this is an antiquated form of contact management, and want to improve. Of course, the challenge is that we do not have our own server to use, and we are not able to use any third party service that costs anything. Since we already have LiveCycle Designer, I'm hoping XML forms can make things easier for our administrators. I really hope there is a scriptable solution for this.
Here is what I've done (much of it to learn how LiveCycle Designer works).
I created an XDP with all the appropriate fields.
I also created separate XML files for each vendor.
I was able to create individual PDFs when I associate the vendor-specific XML file to the XDP using the Locate Data File field in the Defaults tab of the Form Properties.
While this works, I essentially have just done the same amount of work as our current solution. Nonetheless, since LiveCycle is scriptable, I'm hoping that I can automate a number of these tasks. Is it possible to automate from within Designer, the creation of multiple PDFs—one for each vendor—using the same XDP form? Do I need to make the XDP form a TDS file? Is this even the right approach? Is there a way to connect to the database and filter out by vendor the information I need?
I apologize if this is all over the place. Any and all advice would be most appreciated!!!

The Split command also allows you to do this with a few more options like contol of the file naming and number of pages. Here is a quick tip on how to do this if you're interested.
[Click to watch on the AdobeTV site]

Updation problem while creating multiple objects from enterprise portal

Hi All,
From enterprise portal i am calling an RFC 'BAPI_PROJECT_MAINTAIN' to create objects .
While trying to create multiple objects simultaneously it gives error "sapuser is currently using, can't be created".
It seems like as i am creating multiple objects by calling RFC repeatedly , while the first one is not updated fully i am sending the second value to be processed.
Pl. tell me how to overcome this. Do I need to add any sleep time in EP or any other method is there in SAP to overcome this situation.
thanks
sandeep

Dear Sandeep,
I have discussed this problem with EP team lead in my organisation, i have given your email id to him he will forward the solution on your id.
If usefull reward points helpfull....
Regards,
Rajneesh Gupta

Creating Multiple Ringtones from 1 song

Similar Messages

Maybe you are looking for