Creating multiple vlans on a 877

Hi,
I want to create a default, voice and access vlan on a 877, but just one vlan comes up. On the other two vlan inetrfaces is the protocol down. I guess this has something to do with bridging. I've tried that already, but I can't find documentation about this. Can someone tell me how to bring up the other two vlan interfaces?

You need a trunk in case you are passing multiple VLANs on the port. However, in your configuration you do not need a trunk because each port is assigned to one VLAN.
IN order for all VLANs to go UP all you interface should be Physically and Porotcol UP. Check that all your Fast Ethernet Interfaces are UP.
Let me know how it goes,

Similar Messages

  • Creating multiple vlans across multiple switches

    Hi All,
    How should I create multiple vlans across multiple switches?
    For instance, I have two (primary/redudant) layer 3 (core) switches and four layer 2 access switches (Cisco 2960) for the hosts, and given these are the vlans/subnets to be created. Should I do it in the core switches only and it would just propagate through the access via VTP?  Just trying to practice and learn.. Any help will be greatly appreciated:)
    VLAN 100: [DHCP-workstations]
    172.26.4.0/24
    172.26.5.0/24
    VLAN 200: [Servers]
    172.16.1.0/24
    172.16.2.0/24
    VLAN 300: [Printers]
    192.168.129.0/24
    192.168.130.0/24
    VLAN 800: [Management for switches/routers]
    10.160.1.0/24

    Hi
    You will have the SVI on the core. Set a VTP domain, make one of the cores as VTP server and rest of the switches as VTP clients. Once you do this, you won't have to login into each switch and create a vlan locally. The vlans will be automatically advertised from the VTP server to all the VTP clients.
    Thanks
    Ankur
    "Please rate the post if found useful"

  • How to create multiple Vlan in Controller 4402

    Please let me know step-by-step procedure to create multiple vlan in conroller 4402, In my topology we have vlan -1 for date and vlan - 11 for voice both are in different network, please light me detail config on controller and switch

    Hi Balamurugan,
    I don't want to sound rude, but, you have posted your issue three times.  Each one, I recommended that you go through the WLC Configuration Guide.  I recommended this because you are new to WLC and it's the best way for you to learn.
    However, you recent post has led me to believe that you are reluctant to peruse the document and I am puzzled.  Is there any reason of your reluctance and hesitance?
    Cisco Wireless LAN Controller Configuration Guide, Release 6.0
    http://www.cisco.com/en/US/docs/wireless/controller/6.0/configuration/guide/Controller60CG.html

  • How to create a multiple VLAN or xenbr in oracle vm

    hi,
    i have a server which has a 1 nic card.hence having 1 xenbr i.e.xenbr0
    now my requriement is to create multiple vlan or xenbr into the system.so instead of 1 xenbr i can have many xenbr's & all my guest vm's are in differernt subnets.
    i have trunked the network port from switch side
    i refered below url but still not working..
    http://wiki.oracle.com/page/Oracle+VM+Server+Configuration-bondedand+trunked+network+interfaces
    please help...

    To create a new brigde and use it in your hosts you can try this
    brctl addbr xenbrX
    ip link set xenbrX up
    brctl addif xenbrX ethY
    ifup ethY
    you have created a new bridge with the number "X" on interface "Y" ... now all you have to do is configure you guests to use this new configuration:
    vif = ['
    type=ioemu,
    bridge=xenbrX'
    Hope this helps! ;)
    Edited by: PilotRO on 09.10.2009 00:57
    Edited by: PilotRO on 09.10.2009 00:57
    Edited by: PilotRO on 09.10.2009 00:58

  • Multiple vlan on Access point

    Hi,
    I have three AP but one one is connected with a network cable and the other work on a repeater mode.
    I need to create two vlans which will broadcast two ssid one for office and one for guest. I know you can't create multiple vlan on a repeater but is there any way round then with only one AP which connected to the network and other working in repeater mode?
    Thanks

    You can probably is you configure one radio as a repeater and the other radio for client access, but they will be placed on the same subnet which is your native vlan. I'm not 100% sure that would work anyways, but I know you can't separate the traffic.
    Thanks,
    Scott Fella
    Sent from my iPhone

  • Cannot create 110 vlans per vnic usiing the XML API

    In a Service Profile, I have 2 vnics and both has 110 vlans, The HTTPS request to the UCS fails but when I cut it down to 60 it works. I have seen this working (110) on some UCS versions and fail on the same version on a different UCS. It is not a version issue.
    Anybody has any insight.
    Thanks

    Hi Kumar,
    I need to create multiple Vlan's using XML API. However I am able to create only one at a time
    Currently, I am posting the XML shown below-
            cookie="$cookie">
                    key="fabric/lan/net">
                        defaultNet="no"
                        dn="fabric/lan/net"
                        id="100"
                        name="myLANtest"
                        pubNwName=""
                        sharing="primary"
                        status="created"
                        />
    I tried by sending VlanId's in a range like "1-10". However, received an error mentioned below
    XML PARSING ERROR: unknown property value 101-105, name id, class fabricVlan [fabric/lan/net]
    Can you please throw some light over the issue..
    Thanks
    Dilip

  • Encrypting Aironet 1410 bridge link using multiple VLANs

    I've looked at the documentation available for Aironet 1400 series, and still would like to see a single document showing an example of
    the best encryption/authentication available for bridge links using multiple VLANs.
    As I understand it, 1400 series can support WPA-PSK using AES, which would work for me.  I just can't picture how to integrate chapters 9 and 10 for the 'WEP and WEP Features' + 'Configuring Authentication Types' instructions.
    I'm looking either for an example config, or a step-by-step that did all steps consecutively.
    Thanks

    What doc are you refering to?  If you want to encrypt the link from root bridge to non-root bridge, then WPA/TKIP-PSK is what you should use.  Here is a link to how to setup your link ssid to WPA: http://www.cisco.com/en/US/docs/wireless/bridge/1400/12.2_15_JA/configuration/guide/p15auth.html#wp1044935
    Don't worry about the example they show on the WEP, just use the configuration from the above link for your encryption.
    Configuring a VLAN
    Configuring your bridge to support VLANs is a five-step process:
    1. Create subinterfaces on the radio and Ethernet interfaces.
    2. Enable 802.1q encapsulation on the subinterfaces and assign one subinterface as the native VLAN.
    3. Assign a bridge group to each VLAN.
    4. (Optional) Enable WEP on the native VLAN. <-- Use WPA-PSK
    5. Assign the bridge's SSID to the native VLAN.
    http://www.cisco.com/en/US/docs/wireless/bridge/1400/12.2_15_JA/configuration/guide/p15vlan.html
    Here is an example of vlan 1 (native) will be your management and your wireless link.  vlan 10 & 20 will pass through the link.
    BR# configure terminal
    BR(config)# interface dot11radio0.1
    BR(config-subif)# encapsulation dot1q 1 native
    BR(config-subif)# bridge group 1
    BR(config-subif)# exit
    BR(config)# interface fastEthernet0.1
    BR(config-subif)# encapsulation dot1q 1 native
    BR(config-subif)# bridge group 1
    BR(config)# interface fastEthernet0.10
    BR(config-subif)# encapsulation dot1q 10
    BR(config-subif)# bridge group 10
    BR(config)# interface fastEthernet0.20
    BR(config-subif)# encapsulation dot1q 20
    BR(config-subif)# bridge group 20
    BR(config-subif)# exit
    BR(config)# interface dot11radio0
    BR(config-if)# ssid batman
    BR(config-ssid)# vlan 1
    BR(config-ssid)# infrastructure-ssid
    BR(config-ssid)# end

  • Flex Connect Across Multiple VLANS same SSID

    I just need to find that if we have flex connect setup for differnet vlans using single controller, will roaming works when client connects to AP in a differnet VLAN but using same SSID.
    Example below:
    1) Client connects to AP on specific SSID mapped to VLAN 100, get an IP address ..all good at this point
    2) Client walks and connects to a differnet AP on same SSID but mapped to VLAN 200...at this point I observe client doesnt get a new IP address in fact it retain IP from step-1 and there is no connectivity
    3) Client walks back to first AP and connectivity is restored
    Why in step-2 client doesnt gets a new IP from VLAN 200 even when it shows connected to AP.

    Just to add to Rasika.... L3 isn't supported....I just ran into this a few days ago.... clients should request another dhcp when roaming to another FlexConnect AP that is mapped to a different VLAN.  The issue is, that some clients don't try to renew their dhcp address and gets stuck with the default 169.x.x.x.  I see this with Apple devices in general and what we are going to do is get rid of the multiple vlan setup (vlan per floor) and create a bigger vlan that the SSID will be mapped to.
    Thanks,
    Scott
    Help out other by using the rating system and marking answered questions as "Answered"

  • L2 Integration of Multiple VLANs

    I have reviewed the ACI L2 and L3 Connectivity White Paper.  Using the instructions,  I have successfully integrated an a VLAN from from the outside into ACI.  I used the Extend BD approach.   In looking at the instructions,  it appears that creating an External Bridge Domain is required for each L2 VLAN from the outside.   Is there a way to use the same physical port (VLAN trunk port from downstream switch) to bring in multiple VLANs in to ACI.
    I would like to use only one port for all VLANs to be imported.
    Is this possible ?   If so,  what would be the configuration steps ?
    thanks,

    The question that should be asked is what are you trying to accomplish?
    1. Either you have external endpoints that need to be members of the same EPG as fabric hosted endpoints
    or
    2. You have external endpoints that you need to apply policy between everything else inside the fabric.
    If this is the first case what you should be extending the EPG, not the bridge domain.  By extending the Bridge Domain you're essentially mapping all the external traffic for that BD into one VLAN which will be represented by an External EPG you'd create on the APIC.  This is useful in the case where you have all external users coming into the fabric you want to treat together using contracts between external users and internal EPGs. 
    Ex.
    External Users <C> Web_EPG <C> App_EPG <C> DB_EPG
    C = Contract
    If it's the second case above, and you have end points both inside the fabric and external that need to belong to the same EPG and have the same policies applied endpoints internal or external to ACI, you'll want to extend the EPG as detailed in the first method of the L2/L3 Connectivity guide.
    Regards,
    Robert

  • Multiple VLAN config help

    I need to configure our Cisco Aironet 1200's for multiple VLANs. VLAN101 is for public use & VLAN2 is for employees only. Existing config is attached.
    I need:
    1. To disable the broadcast of VLAN2's SSID so that only VLAN101 shows up in the SSID list for visitors. Right now both are showing up.
    2. To ensure the WEP key is setup correctly for VLAN2
    Thanks in advance for your help!

    So are you saying both SSID's are currently broadcasting?
    I would delete and re-create your client configurations. I don't think it's on the AP side.

  • How do i creating multiple icloud accounts for one itunes account

    how do i creating multiple icloud accounts to access one itunes account?

    Perhaps you could explain a bit more what you want to do...
    iCloud accounts don't access an iTunes account.
    iTunes account is used to make purchases.

  • How do I create multiple-up pages populated with variable data?

    I am trying to create a variable data Illustrator file but with a catch, I have to create multiple points of data on one artboard.  I am using a template with 36 identical shapes, and I'm trying to add a different image to each based off of using variable data.  I understand the premise of creating multiple output files based off of an illustrator file and data, but I have to create a single output file using 36 points of data, all QR codes.  The reason is that this 36-up 14.5" x 14.5" sheet will be printed on a large format inkjet and then be fed into another machine (not a cutter) that requires that specific layout for it's process.  I cannot create individual files, I need sheets based off of my 14.5" x 14.5" 36-up template.
    Any suggestions other than making each shape in the template a separate variable (even though they are all the exact same shape) would be greatly appreciated.
    My goal is to populate each of these shapes with a different QR code and then output the whole sheet as a single .EPS or .PDF file.

    My goal is to populate each of these shapes with a different QR code and then output the whole sheet as a single .EPS or .PDF file.
    You're barking up the wrong tree for this with Illustrator's Variables palette.
    Think of it like this:
    Imagine a typical spreadsheet with multiple rows of the same kind of data, except for the first row which serves as the "labels" of the columns.
    The on-page objects which you define as Variables in Illustrator correspond to the first row; the column labels.
    The datasets correspond to the following rows of values below the label row.
    Cycling through the datasets simply moves up and down the rows, revealing one row's data at a time for each of the column labels.
    Your multi-up array does not fit that data model. You are essentially trying to make a layout showing all the individual cells below the single label of one column (downward across all rows). (Illustrator's Variables feature doesn't even let you put multiple instances of a single variable in the document, so that the same value occurs in multiple places.)
    You're trying to build the functional equivalent of a typical "gang up" press sheet, like a 10-up layout of business cards, each showing the same kind of data (name, phone, etc.) for multiple employees, so that you don't have to do separate press runs for each employee. That's certainly a common need, and one quite appropriate to a program like Illustrator. But Illustrator's Variables feature does not do that.
    Essentially, what you are wanting to do is to replicate the basic functionality of any program which is used to print labels from data (like the typical mail merge function for address labels which are ganged up with some number of different labels on a page). What you want could be done in Illustrator via a custom JavaScript, but it would be a pretty silly exercise in reinventing the wheel. If it were me, I'd probably build the solution in FileMaker Pro (a database program), depending on the specific graphics requirements. However, you should be able to do it in InDesign, using its data merge feature.
    JET

  • In Pages (5.5.1) can I create multiple Paragraph Styles within one paragraph?

    In Pages (5.5.1) can I create multiple Paragraph Styles within one paragraph. 
    I need to make a table of contents for my Mater's Thesis and want to use the automatic table of contents feature.  I want the first sentence of a paragraph to have a different paragraph setting than the rest of the paragraph.  Is this possible?
    Thanks!

    Nice of you to be doing this for your Mother's Thesis.
    There are several issues here:
    1. A Paragraph Style is what it says, the style for the paragraph
    2. You can format text within a paragraph by applying a Character Style
    3. Pages 5.5.1 lets you apply formatting to overall text for the T.O.C. but not parts of it and you can not retain that formatting as a Paragraph style
    So in answer to your question, no.
    You will need to create the T.O.C. manually and unfortunately as Pages 5.5.1 can't create bookmarks (just one of over 100 missing features) you will be unable to link the T.O.C. to the referred pages in the list.
    Peter
    Apple's marketing slogan:
    Pages 5.5.1 - Can't Do That!

  • How do I create multiple live USBs of Operating systems to boot from on one flashdrive?

    How do I create multiple live USBs of Operating systems to boot from on one flashdrive?
    I am attempting to create multiple live USBs within one flashdrive so that i can boot various operating systems without having to buy multiple USb sticks. I am using a Mac OS X Snow Leopard 10.6.8 Operating System currently. I am using the Terminal provided by the OS.
    I would like to try Debian, Kali, Precise Puppy, and Sabayon- with one space left empty for whatever Linux OS I would like to try next. I have partitioned an 8GB flashdrive into the following sections:
    name of intended OS,     space allocated for it:
    1)Debian ........................1.32 GB
    2)Kali..............................2.61GB
    3)Precise Puppy..............163.7MB
    4)Sabayon.......................1.77GB
    5)TBD..............................2.14GB
    I have figured out how to change the .iso files of the operating systems into .img files with the following commands:
    hdiutil convert -format UDRW /path/to/input.iso -o /path/to/output.img
    a .img.dmg file is created, this is corrected in the next line of code *please note: I am a a very beginner at programming, and would greatly appreciate any help. Thank you!
    mv /path/to/output/file.img{.dmg,}
    This is where I started to get confused:
    I entered diskutil list to find the location of the partitions on my flashdrive, and this is the relevant section:
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:     FDisk_partition_scheme                        *8.0 GB     disk1
       1:                 DOS_FAT_32 DEBIAN               1.3 GB     disk1s1
       2:                 DOS_FAT_32 KALI                    2.6 GB     disk1s2
       3:                 DOS_FAT_32 PRECISE            163.7 MB   disk1s3
       4:                 DOS_FAT_32 SABAYON           1.8 GB     disk1s5
       5:                 DOS_FAT_32 TBD                     2.1 GB     disk1s6
    This is the code I attempted to use and the subsequent result:
    charles-burtons-mac-mini:~ charlesburton$ sudo dd if=/Users/charlesburton/Desktop/debian-live-7.2-i386-gnome-desktop.img of=/dev/disk1s1 bs=1m
    dd: /dev/disk1s1: Resource busy
    *at this point I went to the Disk Utility GUi and unmounted only the DEBIAN partition, now back to the terminal*
    charles-burtons-mac-mini:~ charlesburton$ sudo dd if=/Users/charlesburton/Desktop/debian-live-7.2-i386-gnome-desktop.img of=/dev/disk1s1 bs=1m
    dd: /dev/disk1s1: end of device
    1259+0 records in
    1258+1 records out
    1320005632 bytes transferred in 1011.966891 secs (1304396 bytes/sec)
    Please may someone help explain why I had a return value of +1 in my records in and how I can make it work properly.

    I would like to know the answer to this as well.  I tried renaming the 3D version by adding 3D after it, but it still not a separate movie in iTunes.
    It's putting them in the same folder.

  • Create Multiple Build Controllers in Team Foundation Server 2013

    Hi all,
    I have created an environment of Team Foundation Server 2013 & also installed SharePoint Foundation 2013. Everything is working fine. I have created a build controller on the same machine on which I have installed the TFS. This build controller is used
    for building the projects of a Team Project Collection. I know that a build controller can only be used for one Team Project collection. Creating multiple build controllers on the same machine is not recommended by Microsoft.
    I have another team project collection, for this I need to create another build controller. Could you please tell me how to create another build controller on a different machine.
    Please  help me with this.
    Thanks.

    Hi Vishwajeet,
    You can do this by installing TFS in another machine (do not configure as app tier), and then configuring build services.
    Complete instructions are in my post here http://chamindac.blogspot.com/2014/02/06-setup-build-server-setup-virtual.html 
    Setting up a TFS environment step by step explained in this blog series
    http://chamindac.blogspot.com/2013/12/setup-virtual-environment-for-tfs-2013.html
    My posts explain how to setup on virtual box but it is same steps even if you setup in hyperv VM or in a standard machine.
    One more recommendation I would like to make here is, it is better if you do not configure build services in TFS App Tier. Use separate build servers. Another one is do not create too many project collections. Project collections require separate build servers,
    test controllers etc. because one is fully isolated from another collection. So carefully plan your TFS environment. I recommend you to download and read TFS Planing Guide from ALM Rangers from here
    http://vsarplanningguide.codeplex.com/releases
    Cheers!
    Chaminda

Maybe you are looking for