Creating new characteristic in Process Instruction Sheet

I need to create new characteristics and i want them to appear on the PI sheet. i.e in the txn CO58. How do I do it?

Dear Neeraj,
First Define Char in O25C or CT04. Now check which Process Instruction Category You are using. You can check all PI categories in O12C. Now assign it under Characteristics/Process instruction category.
Regards
Abhijit Gautam

Similar Messages

  • Error while creating process instruction sheet in COR2

    While creating Process instruction sheet, the following error is occuring. Please guide me to resolve the issue.
    Define variable QTYPRODUCED for default value
    Message no. CPOC110
    Diagnosis
    In the process instruction, variable QTYPRODUCED is defined for the value that you want the system to propose when data is entered in the PI sheet. This value does, however, not exist because it has not yet been defined as a variable.
    If you want to use a variable in a process instruction, however, you must first have defined it in a preceding process instruction or in the same process instruction.
    Procedure
    Define variable QTYPRODUCED in one of the preceding process instructions or in the same process instruction.
    Define Variable
    Regards
    Kumar

    1.  Assign characteristic PPPI_VARIABLE to the process instruction before the message characteristic to which the variable is to refer
    2.  Assign the required variable name to characteristic PPPI_VARIABLE.

  • Process instruction sheet and control recipe

    dear,
           can u let me know how the process instruction sheet is created or maintained and how the control recipe and destination works.
    if I want to start with PI sheet and control recipe in my organisation , how do I go ahead with configuration as well as process.
    thnx-rgds
    Amitabh

    Hi,
    In control recipe destination the destination type must be browser based.Another is Abap based generally it is using.
    So select that recipe destination, select phase & go in deatil u will find INSTR.READ1, READ2,SIGN which can used as a instruction.
    There are two types 1:process sheet 2: remote fuction call (RFC)
    Process sheet is used for giving instructions to line operator & also entering data during reaction etc per period.
    For INSTR- select it give instruction for that particular phase.
    READ1 - In which we are one column is available where we can enter 1 value by line opearator
    READ2- Here 4 columns are available u can use it as date,time,temp,total etc. as per your requirement.
    SIGN- Here u can use it as a to identify who entered the value.Systen will ask for pass word after entering ID
    After creation & releasing  process order  create contriol recipe.
    Thern go for T code- CO 53 - send control recipe(control recipe monitor)
    http://help.sap.com/saphelp_46c/helpdata/en/f3/6ee4117aed11d2a5fe0060087d1a6b/content.htm
    CO60 - Operator will enter the values
    CO54 - send process messages
    http://help.sap.com/saphelp_46c/helpdata/en/ac/6a101268ce11d2a67600104b57eaa3/content.htm
    CO55- Check the report.
    Check the above & reward if useful.
    Regards,
    Suhas

  • COPA - How to add table when create new characteristic

    Hi all,
    I want to create new characteristic in COPA, that is batch (as currently, FG's price is manged by batch).
    I find that this value is maintain in table VBRP. However, when I create new characteristic, I dont is this table in current list.
    Please tell me how can I  add this table ?
    Step by step what I did is:
    1.KEA5: create new characteristic
    2. enter characteristic name
    3. choose "transfer from SAP table"
    4. because it doesnt have table VBRP in the this, so I type directly "Table Fields --> Table"
    5. Systems show mesg "Enter valid reference table"
    Please tell me how can I  add this table ?

    Hi Emily,
    Pls check the SAP Note 111232 which gives similar solution that of you are looking for...
    Follow the procedure...
    Please create a characteristic by transferring it from table VBRP and
    then change the automatically from system defined TKEZU entries like
    the note 111232 explains.
    The way to solve the problem would be to change the assignment
    table TKEZU by exchanging VBRP with KOMP in the table name:
    (1) Delete the following entry in table TKEZU (you can maintain TKEZU
    with view V_TKEZU in transaction SM30):
    Characteristic, B Tran, Table, Field name, Offset, Length
    (2) Add the following entry to table TKEZU:
    Characteristic, B Tran, Table, Field name, Offset, Length
    XXXXX KEDR KOMP BWTAR
    (3) Generate the environment of your operating concern.
    Pls revert with result...
    Srikanth Munnaluri

  • Process instruction sheet configuration

    Dear Guru's,
    I am exploring SAP PP PI and not much into it,since it has been few months.
    I want to know more abt the PI SHEETS, and the way to configure it.
    Since my client is not using PI sheets, i want to explore this area and want to know more abt it.
    Hence it is a kind reques to you all, to please help me as you all have done earlier and let me know what exactly is PIS sheet and the way to configure it .
    Thanks and regards
    rahul

    Hai Rahul,
    Hope below helps you out.
    Logistics --> Production Process --> Process Management --> PI Sheet --> CO58 - Maintain
    1)Double Click CO58 & Enter PI sheet No. It can be searched by pressing F4.
    2) Maintain the value and note the instructions.
    3) Click the NOTE button & maintain the data in the PI sheet
    4) Click the REPORT DATA button at the top and open on report data screen
    5) select the both operation line & click on REPORT button at the top.
    6) The Message appears at the bottom u201CData has been reportedu201D and then save it.
    This is steps you can maintain the PI SHEET.
    CONFIGURATION STEPS:
    1) SPRO-->PPPI --> PROCESS MANAGEMENT --> CONTROL RECIPE/PI SHEET --> DEFINE & SETUP CONTROL RECIPE DESTINATIONS
    2) SPRO-->PPPI --> PROCESS MANAGEMENT --> CONTROL RECIPE/PI SHEET --> SELECTION VARIANTS FOR PI SHEET --> DEFINE SELECTION VARIANTS FOR PI SHEET
    3) SPRO-->PPPI --> PROCESS MANAGEMENT --> CONTROL RECIPE/PI SHEET --> SELECTION VARIANTS FOR PI SHEET --> ASSIGN SELECTION VARIANTS FOR PI SHEET
    4) SPRO-->PPPI --> PROCESS MANAGEMENT > PROCESS INSTRUCTIONS> DEFINE PI CATEGORIES FOR PI SHEET.
    You should foolw these above configuration steps in PI sheet.
    You can maintain all datas in PI sheet.
    And then follow these
    O10C Maintain Control Recipe Destinations
    O12C Process Instruction Categories
    Then
    COR2 Generate After creating the process order release
    CO53 Control Recipe Monitor Send the control Recipe
    CO58 PI Sheet Maintain Input the values in the control recipe (PI sheet)

  • Convert Query to Formula: BexSetData - Create New Characteristic Combinatio

    Hello experts,
    I try to save data from an excel workbook via formula BexSetData.
    When I change only Key Figures and save data, everything works fine.
    But when I try to change the value of a characteristic, the result of the BexSetData-Formula is #NV. This is just the case when I change the characteristic value to a value which doesn't exist in the cube. If I change to an characterisitc combination, which already exist on the cube, everything works fine.
    Is it possible to create new charecteristic combinations by using BexSetData?
    Master Data is available for the characteristic value.
    Thanks in advance
    Johannes

    Hello Rik,
    thanks a lot for your answer.
    the master data for the characterisitc values already exist.
    but there is no data record in the cube with the same characterisitc combination.
    example:
    The following data is on the cube
    Plan   |   Period      |     Key Figure
    A       |   012.2009 |         1000
    Now I want to create a new data record on the cube with a new Period (master data exist in info object) via BexSetData
    Plan   |   Period         |  Key Figure
    A       |   012.2010    |      1000
    Thanks
    Johannes
    Edited by: Johannes Hilscher on May 28, 2010 5:09 PM

  • Creating new characteristic in GATP

    Hello All,
    We have a requirement, where new characteristic is to be created in GATP planning area. Could you please help me with step by step configuration to be done in this case.
    Regards
    Rahul Chitte

    Rahul,
    If you had said key figures, I could have been a bit more optimistic. For new characteristics, though, you basically have to start from scratch.  It is just as if you are re-creating your Planning area, all dependent planning books, and all allocation config.  Go through every single step your originally performed when you created your entire allocation scenario. 
    You will most likely lose all existing data in your books.  If this is going to happen in a production system, ensure that you back up your data before starting.  Test the reload of data before moving the changes into production.
    I don't intend to give you a step-by-step for setting up Allocation and Demand planning for allocation.  For this info, refer to Best Practices.
    Best Regards,
    DB49

  • How to create new "Planning delivery schedule instruction"

    Hi All,
    I need new call control parameters created in VA32 for all shipping scenarios.  For some new shipping frequencies. Kindly help how to create.
    Thanks in Advance.

    Tocde: VOZP
    Path: SD->sales->sales doc->sch.agr.with del.sch.-> maintain PDS instruction
    chidambaram

  • Process Instruction generation - PI Sheet

    Fellow Experts,
    I've used Process Management with a 3rd party MES application to download Process Instructions (via Cont recipes) in the past. I've gone thru the documents for PI Sheet creation & understand that unlike with a 3rd party Process Control System (where PI's are automatically created & sent), one has to go onto the Master Recipe or the Process Order & enter/define the Process Instructions that are intended to be sent to the Process Control (PI Sheet in this case).
    Is my understanding correct?? If yes, is there not a way with which I can invoke the PI creation automatically with the release of the Order ??
    Cheers

    Hi Andy,
    Process management coordinates the exchange of production-relevant data between the ERP system and the independent production level (of an external system).
    The production level can be controlled as follows:
    Manually: Steps carried out manually by the operator
    Automated: Steps carried out automatically by process control system
    Partially automated: Steps are carried out both manually and automatic
    It depends how we are going do this.
    If it is manual, control room person or engineer in the Plant has to feed the values maintained in PI sheet.
    If it is automated, the value will come from machine. Like from DCS, PI sheet values will be populated automatically. For this configuration and ABAP coding is needed.
    Process instruction types:
      Type 0: Universal Process Instruction Category
      Type 1: Process Parameters
      Type 2: Process Data Requests
      Type 3: Process message subscription
      Type 4: Process Data Calculation Formulas
      Type 5: Inspection Results Requests
      Type 6: Dynamic Function Calls
      Type 7: Sequence Definition
    Type 1,2 and 3 can be used with Process control systems (automated) and all except type 3 can be used with PI sheets (manual)
    Control Recipes transfers control data from the process order to process control.
    The information contained in a control recipe and the destination to which it is sent are user-defined.
    Control recipes can be sent to :
    Automated Plants         PI-PCS interface by control recipe download.
    Manually Controlled Plants    Sent to the PI sheet.
    For characteristic-based process instructions- ABAP list-based PI sheet or a browser-based PI sheet.
    For XSteps, browser-based PI sheets
    PI sheets used to exchange data between the partially or completely manually operated production level and the SAP system (PP-PI).
    In manually operated production lines, this usually involves a process operator who uses the PI sheet to transfer production-relevant actual data to the SAP system and receives data from the SAP System
    Types of PI sheet:
      The ABAP list-based PI sheet
      The browser-based PI sheet
    Hope you got the answer.
    Srini

  • CO-PA new characteristic from table VBRP

    Hi experts,
    i need create new characteristic in CO-PA. I want to have in CO-PA characteristic from invoice - field - Country of destination of sales order (field LLAND_AUFT, table VBRP). Table VBRP is not in allowed reference tables in CO-PA when i create this. And user defined have not reference for table. How can i do it?
    Thanks
    Gustavo

    Hi Gustavo,
    Were you able to find a solution for the issue? I have a similar situation where I need to derive the characteristic value from VBRP. Please reply.
    Thanks!!

  • Forgot security questions, how do i delete old ones and create new ones

    forgot security questions on, how do i delete old ones and create new ones

    The following has instructions: If you forgot the answers to your Apple ID security questions

  • Process Instruction (PI) Sheet text (Browser version)

    Our Process Instruction (PI) Sheet information is stored in the text tables (STXH/STXL) under TDOBJECT = 'COPOC' and TDID = '0001', but has a cryptic TDNAME key value.  We use the 'browser' PI Sheet display version, not the ABAP base display version which stores the PI data on tables COCHP (Header data) and COFTP (PI Sheet: Process Instructions).  Function Module COP0_DISPLAY_PI_SHEET would be used to display the ABAP PI Sheet information.  During debug of tcode CO60 (Find PI Sheet), it appears that the Control Recipe (CRID) value is used to create the TDNAME key value via Classes/Methods.  Unfortunately, accessing the text thru the different Classes does not seem straight forward.  Does anyone have code/logic to extract the PI Sheet text directly using the CRID in a more simpler procedure?
    Thank you in advance for your assistance.
    jm

    Hi,
    use this Function module to get the text.
    <b>COCB_CONTROL_RECIPE_GET_DETAIL</b> pass the control recipe ID.
    try this also..
    COCB_CONTROL_RECIPE_GET_TEXTS
    regards
    vijay
    Message was edited by: Vijay Babu Dudla

  • Create new sheets in report with script?

    Is it possible to create new sheets in the report using VBscripts?
    I am writing a script that will create a report with different sheets. The number of sheets in the report will change in each report depending on the number of groups added in the data portal. For example: If there are 3 channel groups in the data portal I will need 3 sheets in the report.
    I searched for the instructions but I could not find how to do it.
    And another question: how can I insert the name of a channel group in the report?
    I am using DIAdem 9.0.
    Thank you very much!

    For all with the same problem: You can copy the Picture an paste it automaticaly in ms word.
    Here my code:
    Call PicPrint("WinClip") ' Copy picture to clipboard
    'open Word document
    ' Start Word via OLE.
      ' Always a new instance of Word will be created.
      Set Word = CreateObject("Word.Application")
      ' Make Word visible. Until now Word was not visible.
      Word.Visible = True
      ' Maximize Word-window.
      Word.WindowState = wdWindowStateMaximize
    ' Create new Word-document based on prepared template.
       AutoDrvLibr="C:\......"    'direction of the Word ducument
       Const DiademWordTemplate = ".....doc"                                'ducument name
       Word.Documents.Add AutoDrvLibr & DiademWordTemplate, false
        ' Maximize document-window.
    call copy_to_Word
    Private Sub copy_to_Word
      Word.ActiveWindow.WindowState = wdWindowStateMaximize
      ' Activate fullpage mode in Word.
      Word.ActiveWindow.ActivePane.View.Zoom.PageFit = wdPageFitFullPage
      ' Set reference to Word-document.
      ' With the help of this reference you can easily acess the Word-document.
      Set WordDoc = Word.ActiveDocument
    Const wdPasteMetafilePicture = &H3
    'Paste picture
      Word.Selection.Range.PasteSpecial , , , , wdPasteMetafilePicture
      Word.Selection.EndKey 5                 'Set Courser to end of page
      Word.Selection.Range.InsertBreak(&H1)   'paste new sheet
      Word.Selection.MoveDown 5,1             'move ohne row down to set the courser to the next page
    end sub

  • Process order instruction sheet

    I am creating a process order instruction sheet from transaction COHVPI and CO02. How do i check the standard SAPSCRIPT that is being printed ?? and also the PRINTPROGRAM ???

    Use TCODE CO53 and CO60 to send PI sheets to Process Operator and complete PI sheets.

  • HOW TO - Create new from clipboard and process multiple files - please help

    Need help - have new version of photoshop on trial only ATM...
    Want to know - HOW TO:
    1. Create new from clipbaord
    2. Process multiple files
    Please help.

    For clipboard copy, I start with File > New and the size will be set to what's in the clipboard. Then once the new file is opened, Edit > Paste will place the clipboard contents as a layer in the new document.
    You must remember to use the command Layer > Flatten Image of you want to save as jpeg or any other file format that doesn't support layers.
    For processing multiple files,
    File > Automate > Batch or
    File > Scripts > Image Processor...
    Check the User guide or google information for those commands if you have specific needs.
    Gene

Maybe you are looking for