CREATING NEW/Duplicate Master clips
Hi Guys...me again. I've been reading the manual all weekend...and decided that, since I SCREWED with this compressor thing...that I'd try to prevent the problem from happening again. I need to know if I'm on the right track.
I'm working on a video of our show (animal show) and I am creating a dozen or so "mini clips" in the timeline, one for each animal segment, each contains a/b roll, effects, etc. I DO NOT have these clips linked togeter yet...I've left a gap in the timeline between each clip, in order to grab and move them around as I see fit.
I was thinking...(a dangerous past-time for me) that "Gee, Mark, wouldn't it be swell if I could make each of these little animal clips into independent clips, so if I screw up, or have to go back and tweak it later...I don't have to deal with this **** compressor and ripping apart my work? ".
SO...I read the manual, and it seems that I can do this. The option in the menu is to make an independent clip, but when I highlighted my video/auido files in the clip area, and clicked the independent clip button, nothing happened. Does this mean that it recorded it somewhere on my project drive? i could not seem to find it. Also, should I just Modify it by making a New/Duplicate Master CLip?
Does this sound like I'm on the right track?
I'm just trying to prevent my "other" (freakin' compressor) issues from having to happen again.
THANKS AGAIN!
MW
No. That is not what it means.
Make independant clip removes the link between the timeline clip and the clip in the browser that the timeline clip came from. In otherwords, it will keep you from matching back to that clip in the browser.
I don't know what issues you have with compressor, but if you want your segments to be self contained clips, export them as self contained quicktimes (using Export QuickTime Movie... leave it at Current Settings... and set Self Contained). Then you can bring them back in and arrange them in your timeline as you see fit, they will be entirely self contained...
Patrick
Similar Messages
-
MM01 Create New Material Master without Basic view
Hi,
The SAP system allow us to create a new material master Purchasing View only (without Basic views). We execute T-code MM01, select Purchasing view only, enter the purchasing view data and save. Material master created with only the Purchasing view.
We want to control whereby Basic view must be created first before any plant/organisation material views (Sales, purchasing, Accouting etc) can be created. That means user cannot create Purchasing view ONLY if the Basic views is not created, can this be done??
best regards,Hi,
For most of the standard SAP material types the basic data 1 view is configured as mandatory, but that can be turned off in the configuration. The first place I would look would be in SPRO under 'Logistics - General -> Material Master -> Basic Settings -> Material Types -> Define Attributes of material types'. In this transaction, highlight the material type being used and click on the magnifying glass. The section 'User departments' shows what views can be created for a material. You need to check 'Basic Data' is selected here.
If that isn't the problem, then I would suggest that you look at the screen sequence and also the field selection configuration for the material type, which you can find under 'Logistics - General -> Material Master -> Configuring the Material Master'. This configuration dictates what fields are shown on the material master and the status of each field, i.e. whether it is mandatory or not. -
Let's say my folder structure is:
>Personal Photos
>>2014
>>>140406 NYC Visit
>>>140507 San Francisco Vacation
etc.
I then go to Import new photos from camera. I specify that the photos should go in the folder '2014,' click Into Subfolder, and enter a name for the new folder in the box -- let's say 140525 Yankees Game. This used to work just fine, but lately what's been happening is that LR creates a separate directory in lowercase below the existing directories:
>personal photos
>>2014
>>>140525 Yankees Game
If I look in Finder, the new folder is exactly where it should be. The only problem is the way that the new folder is shown in LR. If I try to move the new folder into the 2014 directory, I get a message saying that it's already there.
I wind up creating a dummy folder in the desired directory, moving the files from the bogus folder into the new folder, then deleting the bogus folder. It's a pain in the neck.
Can anyone help me with this?Please don't crosspost. It cuts down on the effectiveness of responses, leads to people wasting their time answering what others have already answered, makes for difficult discussion, and is generally just annoying and bad form.
-
Multi cam synced, can't create the new seq from clip
multi cam work flow. trying to follow through the tutorials and help - but stuck. I have synced 2 cams with audio, next step says to create new sequence from clip - but when I do all I get is a 1 second sequence (it should have been 15mins. Tried all the methods listed, now randomly trying select all, targets tracks, etc, ?
edit -
That helped, back at it - thanks. New trouble - although I can now make the multi-cam target sequence of the correct duration, I move into program monitor for editing the multi cam display enabled, the separate sources/cams no longer show in the window... it's just blank. I've checked my vid drivers- up to date with manufacturer (not windows) updates. -
Font color not preserved in "Duplicate as Master Clip" operation
When I use Duplicate as Master Clip on a title clip, it does not preserve the font color. It's a pain to have to change the font color every time on what is supposed to be a duplicate.
Is there a way to copy and keep the same font color?Frankly I don't know what you're doing (and I'm not so sure you do either). The only time the Duplicate Master Clip function is available is when an item is selected in the browser. It's not available to a title in the timeline that has been opened from the generators into the viewer. It is only available if the title is in the browser. How and why is this text generator getting into the browser?
Using the procedure you've described the application behaves correctly. The text if it's made as a duplicate master in the browser is a separate instance, and one dos not effect the other.
It really doesn't seem as if you're using the application the way it's designed to be used.
Why is it that when you put a clip into the timeline it has to be rendered? I'm still curious about that. -
Create new Equipment (t-code IE01) for existing asset
HI Expert,
I have an enquiry on equipment creation via t-code IE01 for existing asset. There are synchronization between Asset Master and Equipment Master which mean both sides will be updated during the creation and changes of master data.
I have create new equipment master via t-code IE01 and has tagged to the existing asset. However after save the creation, new inventory number was generated to the asset master and had overwrite the existing inventory no. Is it because of the synchronization or it is a system standard?
Your answer is highly appreciate.
TQ.My configuration is "Direct Synchronization After Saving" for both master data (asset master & equipment master).
However, I did not assign the Inventory No Field in asset master as a synchronization with equipment master, so how come system can re-generate new inventory no and overwrite the existing inventory no in the asset master? and what the solution if we do not want system re-generate new inventory no in asset master since it has been effected on the printing barcode sticker for the asset.
Really appreciate your answer.
TQ. -
Hi all. The new CC master clip effects feature is a pretty slick and has lots of possibilities. However, I can't seem to figure out how to access the effect once its been applied. I've seen several tutorials where the editor simply clicks on the source clip in the source monitor to open up the effect controls for the applied applied clip. This doesn't seem to work for me at all. Can I maybe access the effects controls for the master clip effect from the project panel? Any advice?
Thanks,
Richard AngleThe Effect Controls Panel is now focus sensitive in a way that it wasn't before the master clip effects feature was added.
When the Source Monitor has focus with a master clip loaded, the ECP loads that master clip. To load a master clip in the Source Monitor, you can either double-click it in the Project panel or use Match Frame from the Timeline.
When the Timeline has focus and a single track item is selected there, the ECP loads that track item. With a track item loaded, the ECP always shows the "intrinsic" effects: for Video, Motion, Opacity, and Time Remapping; for Audio, Volume, Channel Volume, and Panner.
Setting focus on panels other than a Timeline or the Source Monitor has no effect on what's loaded in the ECP. -
Duplicate Check while creating new BP
Dears,
I am a CRM Consultant and working on a CRM VMS integration scenario, wherein BP(End customer) is created in VMS system and this will be replicated to SAP CRM system which has duplicate check active. However we would like to perform the duplicate check within VMS System, so that it checks against existing BP records in BUT000 of VMS System.
Can you share your experience in performing the same?
Cheers
SwetaThanks Ritesh/Ganesh.
Yes i understand that we can make certain fields which needs to be validated/checked during customer/bp creation process.
Example:
Customer 1 : Already exists in VMS DB.
First Name: Steve
Last name: Jobs
Mobile: 868686
Email:[email protected]
BP ID/Customer No : 100
Customer 2: Being created by user in VMS DB
First name: Steve
Last name: jobs
Mobile: 868686
Email: [email protected]
Based upon tolerance set by business, system will display a pop up with duplicate message....
User can ignore the message and continue creating new customer/bp record or user can make use of BP/customer 100......
This is how duplicate check works in the CRM System....
Note: when system tries to find the potential duplicate , it is not actually checking in CRM DB, but in TREX.....
So can we achieve similar functionality in SAP VMS System ? if yes....can you please provide config steps or any BADI or user exit ..etc.....
Hope i am clear...
Thanks again for your suggestions.
Best Regards
Sweta -
Unable To Create New Open Directory Master
I have a brand new installation of MacOS X Mountain Lion Server, latest version, in a brand new Mac Mini. This Mac Mini is being co-located in a data centre, and I am setting it up via remote access (screen sharing). The data centre has setup DNS zone records for my domain, including a reverse DNS PTR record, and everything in the DNS is working fine.
During the installation of Server, when the installer asked for the type of 'Host Name', I selected 'Host name for Internet'. The installer was able to use the IP address of the Mac Mini to automatically find the correct host name, and configure it. Once the installation was complete, no services were turned on - not even DNS, as the installer probably figured out that DNS services were being handled externally.
The first thing I went to try and do was to turn on Open Directory. I turn the service on, and a sheet comes down, where I select to "Create a new Open Directory Domain". I click 'next', and on the next sheet I enter the OD Administrator's details, and password. Click 'next' again, and then I get the following message:
"This computer's host name is invalid.
The host name does not resolve to any configured address of this computer. Please ensure the host name is correct."
Opening Terminal app, and typing "hostname", I get the correct hostname, as showing in Server app itself.
Entering "sudo changeip -checkhostname" in Terminal app, I get all correct details for the IP address and host name of the machine, and the message: "The names match. There is nothing to change. dirserv:success = 'success'"
I finally tried getting Server app to change the host name itself - going into the Server pane, select the 'Network' tab, and in the 'Names' section, next to the host name, click on the "Edit..." button. Again, went through the wizard, and the wizard again was able to find the hostname automatically from the machine's IP address. Once the 'changing' process was completed, I went to try and initialise Open Directory, and again, got the same message.
Can anyone shed any light? Any suggestion would be welcome at this stage...MrHoffman, thank you for your guidance. You have, however, given me a bit of a headache.
MrHoffman wrote:
127.0.0.1 is likely going to be incorrect here. Please reference the DC DNS servers, and not a local server. If you're in a DC and particularly with a public-facing host without an outboard firewall to block DNS traffic, you likely do not want to be running your own local DNS services.
As described previously, the server was referencing the DC DNS servers. The server was not running its own DNS service. Open Directory was not able to detect that the ip address and the hostname were correct with this setup - even though the command line on the server as well as externally showed that all DNS records were setup correctly, and that the IP address and hostname matched. The server's own installation wizard and 'Change Host Name' wizard automatically detected the hostname from the machine's ip address - by consulting the reverse DNS PTR record in the DC DNS servers.
Starting the server's own DNS server - and adding '127.0.0.1' to the top of the DNS list in Preferences - allowed me to create the Open Directory master, finally. Of course, the internal DNS server was setup so that only the server itself could access it - it was closed to any other machines - and even then, I had it running only momentarily: once Open Directory created its master domain, I switched DNS service off, and removed '127.0.0.1' from the DNS list in Prefences.
With that setup, everything seemed to work fine. All users were able to login, access their share points and their mail.
MrHoffman wrote:
For the host name, the host name would usually be the FQDN fully-qualified domain name, and "example.com" isn't usually a host name. You'd usually find somehostname.example.com here
That is the only machine in the domain. All public sub-domains - like 'mail', 'www' or 'calendar' - point to the same machine. The reverse DNS PTR record points to the higher-level domain "example.com".
Your warning, however, made me worried:
MrHoffman wrote:
I'd probably rebuild the OD configuration, as I'd wonder of OD now had a bogus host name. Once bad DNS gets involved, the entanglements can be quite pernicious..
So I decided to heed your advice, and rebuild OD. I deleted the Open Directory master, and tried rebuilding it with DNS service turned off. As before, OD insists that "the host name does not resolve to any configured address of this computer", and refuses to create the new Master. I ended up following the procedure above again - switching DNS service on temporarily to get OD to work.
The problem is, that now no user can connect to the server anymore. Everyone keeps getting a message stating that their password is wrong - including users on their iPhones and iPads.
I suspect that when I created the new OD Master, it created a new certificate, and that is what is causing problems. While I could try to get the desktop users to delete the old certificates from their keychain, this is not really an option for iPhone/iPad users.
Where do I go from here? After almost 24 hours straight dealing with this, I'm at the end of my rope... -
What is procedure for creating new vendor and material master data in ABAP
What is procedure for creating new vendor and material master data in ABAP .
see below code which is used for creation of vendor master as well as extension...
*& Report ZFC_VENDOR_CREATE *
REPORT ZFC_VENDOR_CREATE LINE-SIZE 100
NO STANDARD PAGE HEADING
MESSAGE-ID ZZ.
TABLES
TABLES : SSCRFIELDS. " Fields on selection screens
CONSTANTS
DATA : C_SPLIT TYPE C VALUE '#'. " Used for Has Separator in GUI_UPLAOD
TYPES
Int'table to hold Vendor Master Data
TYPES : BEGIN OF TY_VENDOR_MASTER,
FLAG TYPE C, " Update Flag
LIFNR TYPE LIFNR, " Vendor Number
BUKRS TYPE BUKRS, " Company Code
KTOKK TYPE KTOKK, " Account Group
ANRED TYPE ANRED, " Title
NAME1 TYPE NAME1_GP, " Name1
NAME2 TYPE NAME2_GP, " Name2
SORTL TYPE SORTL, " Search Term 1
SORT2 TYPE AD_SORT2UL, " Search Term 2
STRAS TYPE STRAS_GP, " Street
PSTLZ TYPE PSTLZ, " Postal Code
ORT01 TYPE ORT01_GP, " City
REGIO TYPE REGIO, " Region
LAND1 TYPE LAND1_GP, " Country
SPRAS TYPE SPRAS, " Language
VBUND TYPE RASSC, " Trading Partner
BANKS TYPE BANKS, " Country
BANKL TYPE BANKK, " Bank Key
BANKN TYPE BANKN, " Bank Account
BKONT TYPE BKONT, " Bank Control Key
BANKA TYPE BANKA, " Name of Bank
AKONT TYPE AKONT, " Reconciliation Account
FDGRV TYPE FDGRV, " Cash Management Group
ZTERM TYPE DZTERM, " Payment Terms
REPRF TYPE REPRF, " Check Double Invoice
ZWELS TYPE DZWELS, " Payment Methods
XPORE TYPE XPORE, " Pay all items separately
END OF TY_VENDOR_MASTER,
Int'table to hold Vendor Extend Data
BEGIN OF TY_VENDOR_EXTEND,
FLAG TYPE C, " Update Flag
LIFNR TYPE LIFNR, " Vendor Number
BUKRS TYPE BUKRS, " Company Code
KTOKK TYPE KTOKK, " Account Group
REF_LIFNR TYPE LIFNR, " Reference Vendor Number
REF_BUKRS TYPE BUKRS, " Reference Company Code
AKONT TYPE AKONT, " Reconciliation Account
FDGRV TYPE FDGRV, " Cash Management Group
ZTERM TYPE DZTERM, " Payment Terms
REPRF TYPE REPRF, " Check Double Invoice
ZWELS TYPE DZWELS, " Payment Methods
XPORE TYPE XPORE, " Pay all items separately
END OF TY_VENDOR_EXTEND,
Int'table to hold Error Records Data
BEGIN OF TY_ERROR,
MSG(200) TYPE C, " To hold Message
LIFNR TYPE LIFNR, " Vendor Number
BUKRS TYPE BUKRS, " Company Code
END OF TY_ERROR.
DATA (Simple Fields)
DATA : W_COUNT TYPE I, " Variable to hold count of Records
W_SUCC_REC TYPE I, " No. of Success Records
W_SUCC_REC1 TYPE I, " No. of Updated Records
W_ERR_REC TYPE I, " No. of Error Records
w_noupdate_rec type i. " No. of Records not Changed
INTERNAL TABLES
Int'table to hold uploaded data from File
DATA : IT_VENDOR_MASTER TYPE STANDARD TABLE OF TY_VENDOR_MASTER,
WA_IT_VENDOR_MASTER TYPE TY_VENDOR_MASTER,
IT_VENDOR_EXTEND TYPE STANDARD TABLE OF TY_VENDOR_EXTEND,
WA_IT_VENDOR_EXTEND TYPE TY_VENDOR_EXTEND,
WA_IT_BDCDATA TYPE BDCDATA,
IT_BDCDATA TYPE STANDARD TABLE OF BDCDATA,
WA_IT_MESSTAB TYPE BDCMSGCOLL,
IT_MESSTAB TYPE STANDARD TABLE OF BDCMSGCOLL,
IT_ERROR TYPE STANDARD TABLE OF TY_ERROR,
WA_IT_ERROR TYPE TY_ERROR,
it_error_fk01 type standard table of ty_error,
wa_it_error_fk01 type ty_error,
it_error_fk02 type standard table of ty_error,
wa_it_error_fk02 type ty_error,
it_succ_rec1 type standard table of ty_error,
wa_it_succ_rec1 type ty_error,
it_noupdate type standard table of ty_error,
wa_it_noupdate type ty_error.
FLAGS
DATA : FL_FLAG1 TYPE C, " Flag to check error upload file
FL_FLAG2 TYPE C, " Flag to hold value
FL_FLAG3 TYPE C, " Flag to hold value
FL_FLAG4 TYPE C. " Flag to hold value
SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-001,
POSITION POS_LOW.
PARAMETERS : P_FILE(128) DEFAULT 'C:\UPLOAD.TXT' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-002,
POSITION POS_LOW.
PARAMETERS : P_VENMAS RADIOBUTTON GROUP R1 DEFAULT 'X'.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-003,
POSITION POS_LOW.
PARAMETERS : P_VENEXT RADIOBUTTON GROUP R1.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-004,
POSITION POS_LOW.
PARAMETERS : P_MODE(1) DEFAULT 'N'.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-005,
POSITION POS_LOW.
PARAMETERS : P_GROUP(12) DEFAULT 'ZFC_VENDOR_C' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-016,
POSITION POS_LOW.
PARAMETERS : P_GROUP1(12) DEFAULT 'ZFC_VENDOR_U' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION-SCREEN ON
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
Form to get file path for upload of data
PERFORM GET_FILE_PATH.
AT SELECTION-SCREEN ON BLOCK B1.
Form to Validate data specified on Selection Screen
CHECK SSCRFIELDS-UCOMM EQ 'ONLI'.
PERFORM VALIDATE_DATA.
START - OF - SELECTION
START-OF-SELECTION.
IF P_VENMAS = 'X'.
Form to upload data from Presentation Server for Vendor Master
PERFORM UPLOAD_DATA TABLES IT_VENDOR_MASTER.
IF FL_FLAG1 NE 'X'.
SORT IT_VENDOR_MASTER BY LIFNR BUKRS KTOKK.
DELETE IT_VENDOR_MASTER WHERE LIFNR = ' '
AND BUKRS = ' '
AND KTOKK = ' '.
Form to process data for Vendor Master
PERFORM INSERT_VENDOR_MASTER_DATA.
ENDIF.
ELSEIF P_VENEXT = 'X'.
Form to upload data from Presentation Server for Vendor Extend
PERFORM UPLOAD_DATA TABLES IT_VENDOR_EXTEND.
IF FL_FLAG1 NE 'X'.
SORT IT_VENDOR_EXTEND BY LIFNR BUKRS KTOKK.
DELETE IT_VENDOR_EXTEND WHERE LIFNR = ' '
AND BUKRS = ' '
AND KTOKK = ' '.
Form to process data for Vendor Master
PERFORM CHK_AND_INS_VENDOR_EXTEND_DATA.
ENDIF.
ENDIF.
END - OF - SELECTION
END-OF-SELECTION.
IF FL_FLAG1 NE 'X'.
FORMAT COLOR 7.
WRITE:/2 TEXT-O01. " Total Number of records read :
FORMAT COLOR OFF.
WRITE:40 W_COUNT.
FORMAT COLOR 7.
WRITE:/2 TEXT-O02. " Total Number of Success records :
FORMAT COLOR OFF.
WRITE:40 W_SUCC_REC.
FORMAT COLOR 7.
WRITE:/2 TEXT-O07. " Total Number of Updated records :
FORMAT COLOR OFF.
WRITE:40 W_SUCC_REC1.
FORMAT COLOR 7.
WRITE:/2 TEXT-O08. " Total Number of Unchanged records :
FORMAT COLOR OFF.
WRITE:40 W_noupdate_REC.
FORMAT COLOR 7.
WRITE:/2 TEXT-O03. " Total Number of Error records :
FORMAT COLOR OFF.
WRITE:40 W_ERR_REC.
if not it_succ_rec1 is initial.
skip 1.
perform display_changed_report.
endif.
if not it_noupdate is initial.
skip 1.
perform display_nochange_report.
endif.
IF NOT IT_ERROR IS INITIAL.
SKIP 3.
Form to display error data
PERFORM DISPLAY_ERROR_REPORT.
ENDIF.
IF FL_FLAG2 = 'X'.
SKIP 2.
FORMAT COLOR 4.
WRITE:/2 TEXT-O04. " BDC Session Name for Creation (FK01) :
FORMAT COLOR OFF.
WRITE:40 P_GROUP.
perform display_error_report_fk01.
ENDIF.
IF FL_FLAG3 = 'X'.
SKIP 2.
FORMAT COLOR 4.
WRITE:/2 TEXT-O09. " BDC Session Name for Updation (FK02) :
FORMAT COLOR OFF.
WRITE:40 P_GROUP1.
perform display_error_report_fk02.
ENDIF.
ENDIF.
*& Form GET_FILE_PATH
This form is used to get the specified path for uploading of data from
flat file with the help of F4 function key
FORM GET_FILE_PATH .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
IMPORTING
FILE_NAME = P_FILE.
ENDFORM. " GET_FILE_PATH
*& Form VALIDATE_DATA
This form is used to validate the data given by user on the Selection
Screen and the appropriate message is been displayed when an wrong
entry is inputted
FORM VALIDATE_DATA .
IF SY-BATCH EQ 'X'.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E001(ZZ) WITH TEXT-011.
" Excel file not to be used in Batch Mode
ENDIF.
IF P_MODE NE 'A' AND P_MODE NE 'N' AND P_MODE NE 'E'.
MESSAGE E001(ZZ) WITH TEXT-012.
" Session Mode should be either A or N or E
ENDIF.
ENDFORM. " VALIDATE_DATA
*& Form UPLOAD_DATA
This form is used to upload data from Presentation Server for either
Vendor Master or Vendor Extend
FORM UPLOAD_DATA TABLES P_IT_VENDOR.
DATA : L_FILENAME TYPE STRING,
L_FILETYPE TYPE CHAR10 VALUE 'ASC',
L_HEADER_LENGTH TYPE I VALUE 0,
L_READ_BY_LINE TYPE CHAR01 VALUE 'X'.
MOVE P_FILE TO L_FILENAME.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = L_FILENAME
FILETYPE = L_FILETYPE
HEADER_LENGTH = L_HEADER_LENGTH
READ_BY_LINE = L_READ_BY_LINE
HAS_FIELD_SEPARATOR = C_SPLIT
TABLES
DATA_TAB = P_IT_VENDOR
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
IF SY-SUBRC <> 0.
MESSAGE I001(ZZ) WITH TEXT-006 L_FILENAME.
MESSAGE ID SY-MSGID TYPE 'I' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
FL_FLAG1 = 'X'.
ELSEIF P_IT_VENDOR[] IS INITIAL.
MESSAGE I001(ZZ) WITH TEXT-014. " Uploaded File contains no data
FL_FLAG1 = 'X'.
ENDIF.
ENDFORM. " UPLOAD_DATA
*& Form INSERT_VENDOR_MASTER_DATA
This form is used to process BDC data for Vendor Master
FORM INSERT_VENDOR_MASTER_DATA .
DATA : L_LIFNR TYPE LIFNR.
CLEAR : L_LIFNR.
sort it_vendor_master by flag.
LOOP AT IT_VENDOR_MASTER INTO WA_IT_VENDOR_MASTER.
W_COUNT = W_COUNT + 1.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_IT_VENDOR_MASTER-LIFNR
IMPORTING
OUTPUT = WA_IT_VENDOR_MASTER-LIFNR.
if wa_it_vendor_master-flag = 'A'.
SELECT SINGLE LIFNR
FROM LFB1
INTO L_LIFNR
WHERE LIFNR = WA_IT_VENDOR_MASTER-LIFNR
AND BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
IF SY-SUBRC EQ 0.
WA_IT_ERROR-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
WA_IT_ERROR-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
WA_IT_ERROR-MSG = TEXT-015.
APPEND WA_IT_ERROR TO IT_ERROR.
W_ERR_REC = W_ERR_REC + 1.
CLEAR : WA_IT_ERROR, L_LIFNR.
ELSE.
REFRESH IT_BDCDATA.
CLEAR IT_BDCDATA.
PERFORM POPULATE_BDC_DATA_VEN_MASTER.
PERFORM CALL_TRANSACTION.
ENDIF.
CLEAR : WA_IT_VENDOR_MASTER.
elseif wa_it_vendor_master-flag = 'C'.
IF FL_FLAG2 = 'X' and fl_flag4 ne 'X'.
PERFORM CLOSE_BDC_SESSION.
fl_flag4 = 'X'.
ENDIF.
REFRESH IT_BDCDATA.
CLEAR IT_BDCDATA.
PERFORM POPULATE_BDC_DATA_VEN_MASTER.
PERFORM CALL_TRANSACTION_FK02.
CLEAR : WA_IT_VENDOR_MASTER.
elseif wa_it_vendor_master-flag = 'N'.
WA_IT_noupdate-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
WA_IT_noupdate-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
WA_IT_noupdate-MSG = TEXT-018.
APPEND WA_IT_noupdate TO IT_noupdate.
W_noupdate_REC = W_noupdate_REC + 1.
CLEAR : WA_IT_noupdate, WA_IT_VENDOR_MASTER.
endif.
ENDLOOP.
IF FL_FLAG3 = 'X'.
PERFORM CLOSE_BDC_SESSION.
ENDIF.
ENDFORM. " INSERT_VENDOR_MASTER_DATA
*& Form POPULATE_BDC_DATA_VEN_MASTER
This form is used to populate BDC data of Vendor Master
FORM POPULATE_BDC_DATA_VEN_MASTER .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_IT_VENDOR_MASTER-ZTERM
IMPORTING
OUTPUT = WA_IT_VENDOR_MASTER-ZTERM.
IF WA_IT_VENDOR_MASTER-REPRF = 'Y'.
WA_IT_VENDOR_MASTER-REPRF = 'X'.
ENDIF.
IF WA_IT_VENDOR_MASTER-XPORE = 'Y'.
WA_IT_VENDOR_MASTER-XPORE = 'X'.
ENDIF.
if wa_it_vendor_master-flag = 'A'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0105',
BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_MASTER-LIFNR,
BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_MASTER-BUKRS,
BDC_FIELD USING 'RF02K-KTOKK' WA_IT_VENDOR_MASTER-KTOKK,
BDC_FIELD USING 'BDC_OKCODE' '/00'.
elseif wa_it_vendor_master-flag = 'C'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0106',
BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_MASTER-LIFNR,
BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_MASTER-BUKRS,
BDC_FIELD USING 'BDC_OKCODE' '=MALL',
BDC_DYNPRO USING 'SAPMF02K' '0106',
BDC_FIELD USING 'RF02K-D0110' 'X',
BDC_FIELD USING 'RF02K-D0120' 'X',
BDC_FIELD USING 'RF02K-D0130' 'X',
BDC_FIELD USING 'RF02K-D0210' 'X',
BDC_FIELD USING 'RF02K-D0215' 'X',
BDC_FIELD USING 'RF02K-D0220' 'X',
BDC_FIELD USING 'BDC_OKCODE' '/00'.
endif.
perform :BDC_DYNPRO USING 'SAPMF02K' '0110',
BDC_FIELD USING 'LFA1-ANRED' WA_IT_VENDOR_MASTER-ANRED,
BDC_FIELD USING 'LFA1-NAME1' WA_IT_VENDOR_MASTER-NAME1,
BDC_FIELD USING 'LFA1-NAME2' WA_IT_VENDOR_MASTER-NAME2,
BDC_FIELD USING 'LFA1-SORTL' WA_IT_VENDOR_MASTER-SORTL,
BDC_FIELD USING 'LFA1-STRAS' WA_IT_VENDOR_MASTER-STRAS,
BDC_FIELD USING 'LFA1-ORT01' WA_IT_VENDOR_MASTER-ORT01,
BDC_FIELD USING 'LFA1-PSTLZ' WA_IT_VENDOR_MASTER-PSTLZ,
BDC_FIELD USING 'LFA1-LAND1' WA_IT_VENDOR_MASTER-LAND1,
BDC_FIELD USING 'LFA1-REGIO' WA_IT_VENDOR_MASTER-REGIO,
BDC_FIELD USING 'LFA1-SPRAS' WA_IT_VENDOR_MASTER-SPRAS,
BDC_FIELD USING 'BDC_OKCODE' '/00',
BDC_DYNPRO USING 'SAPMF02K' '0120',
BDC_FIELD USING 'LFA1-VBUND' WA_IT_VENDOR_MASTER-VBUND,
BDC_FIELD USING 'BDC_OKCODE' '/00',
BDC_DYNPRO USING 'SAPMF02K' '0130',
BDC_FIELD USING 'LFBK-BANKS(01)' WA_IT_VENDOR_MASTER-BANKS,
BDC_FIELD USING 'LFBK-BANKL(01)' WA_IT_VENDOR_MASTER-BANKL,
BDC_FIELD USING 'LFBK-BANKN(01)' WA_IT_VENDOR_MASTER-BANKN,
BDC_FIELD USING 'BDC_OKCODE' '=BANK',
BDC_DYNPRO USING 'SAPLBANK' '0100',
BDC_FIELD USING 'BNKA-BANKA' WA_IT_VENDOR_MASTER-BANKA,
BDC_FIELD USING 'BDC_OKCODE' '=ENTR',
BDC_DYNPRO USING 'SAPMF02K' '0130',
BDC_FIELD USING 'BDC_OKCODE' '=ENTR',
BDC_DYNPRO USING 'SAPMF02K' '0210',
BDC_FIELD USING 'LFB1-AKONT' WA_IT_VENDOR_MASTER-AKONT,
BDC_FIELD USING 'LFB1-FDGRV' WA_IT_VENDOR_MASTER-FDGRV,
BDC_FIELD USING 'BDC_OKCODE' '=/00',
BDC_DYNPRO USING 'SAPMF02K' '0215',
BDC_FIELD USING 'LFB1-ZTERM' WA_IT_VENDOR_MASTER-ZTERM,
BDC_FIELD USING 'LFB1-REPRF' WA_IT_VENDOR_MASTER-REPRF,
BDC_FIELD USING 'LFB1-ZWELS' WA_IT_VENDOR_MASTER-ZWELS,
BDC_FIELD USING 'LFB1-XPORE' WA_IT_VENDOR_MASTER-XPORE,
BDC_FIELD USING 'BDC_OKCODE' '=UPDA'.
ENDFORM. " POPULATE_BDC_DATA_VEN_MASTER
*& Form BDC_DYNPRO
This form is used to move data to BDCDATA int'table
FORM BDC_DYNPRO USING PROGRAM TYPE BDC_PROG
DYNPRO TYPE BDC_DYNR.
CLEAR WA_IT_BDCDATA.
WA_IT_BDCDATA-PROGRAM = PROGRAM.
WA_IT_BDCDATA-DYNPRO = DYNPRO.
WA_IT_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_IT_BDCDATA TO IT_BDCDATA.
ENDFORM. " BDC_DYNPRO
*& Form BDC_FIELD
This form is used to move data to BDCDATA int'table
FORM BDC_FIELD USING FNAM TYPE ANY
FVAL TYPE ANY.
CLEAR WA_IT_BDCDATA.
WA_IT_BDCDATA-FNAM = FNAM.
WA_IT_BDCDATA-FVAL = FVAL.
APPEND WA_IT_BDCDATA TO IT_BDCDATA.
ENDFORM. " BDC_FIELD
*& Form CALL_TRANSACTION
This form is used to Call FK01 for processing of data either for
Vendor Master or Vendor Extend. The error records are inserted to
Session which can be processed using SM35
FORM CALL_TRANSACTION .
DATA : L_OPTION TYPE CTU_PARAMS,
L_SUBRC TYPE SYSUBRC.
REFRESH IT_MESSTAB.
CLEAR IT_MESSTAB.
L_OPTION-DEFSIZE = 'X'.
L_OPTION-DISMODE = P_MODE.
L_OPTION-UPDMODE = 'S'.
CALL TRANSACTION 'FK01'
USING IT_BDCDATA
MESSAGES INTO IT_MESSTAB
OPTIONS FROM L_OPTION.
L_SUBRC = SY-SUBRC.
IF L_SUBRC = 0.
W_SUCC_REC = W_SUCC_REC + 1.
ELSE.
IF FL_FLAG2 NE 'X'.
PERFORM OPEN_BDC_SESSION.
FL_FLAG2 = 'X'.
ENDIF.
PERFORM BDC_INSERT.
W_ERR_REC = W_ERR_REC + 1.
PERFORM ERROR_RECORD_DATA.
ENDIF.
ENDFORM. " CALL_TRANSACTION
*& Form OPEN_BDC_SESSION
Form used to open session for Error out Records
FORM OPEN_BDC_SESSION .
DATA : L_USERID TYPE APQ_MAPN, " Variable to hold user-id
L_GROUP TYPE APQ_GRPN. " Variable to hold value
MOVE P_GROUP TO L_GROUP.
MOVE SY-UNAME TO L_USERID.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = L_GROUP
KEEP = SPACE
USER = L_USERID
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11.
IF SY-SUBRC <> 0.
WRITE:/ TEXT-008. " Unable to open BDC Session
ENDIF.
ENDFORM. " OPEN_BDC_SESSION
*& Form BDC_INSERT
This form is used to insert error records to a Session method
FORM BDC_INSERT .
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'FK01'
TABLES
DYNPROTAB = IT_BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7.
IF SY-SUBRC <> 0.
WRITE:/ TEXT-009. " Unable to Insert Data to BDC Session
ENDIF.
ENDFORM. " BDC_INSERT
*& Form ERROR_RECORD_DATA
This form is used to process the messages for the error records which
will be displayed on the output report
FORM ERROR_RECORD_DATA .
DATA : L_LINES TYPE I,
L_MSG(200) TYPE C.
DESCRIBE TABLE IT_MESSTAB LINES L_LINES.
READ TABLE IT_MESSTAB INTO WA_IT_MESSTAB INDEX L_LINES.
IF SY-SUBRC = 0.
CLEAR L_MSG.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = WA_IT_MESSTAB-MSGID
LANG = SY-LANGU
NO = WA_IT_MESSTAB-MSGNR
V1 = WA_IT_MESSTAB-MSGV1
V2 = WA_IT_MESSTAB-MSGV2
V3 = WA_IT_MESSTAB-MSGV3
V4 = WA_IT_MESSTAB-MSGV4
IMPORTING
MSG = L_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WA_IT_ERROR_fk01-MSG = L_MSG.
ENDIF.
IF P_VENMAS = 'X'.
WA_IT_ERROR_fk01-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
WA_IT_ERROR_fk01-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
ELSEIF P_VENEXT = 'X'.
WA_IT_ERROR_fk01-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
WA_IT_ERROR_fk01-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
ENDIF.
APPEND WA_IT_ERROR_fk01 TO IT_ERROR_fk01.
CLEAR WA_IT_ERROR_fk01.
ENDIF.
ENDFORM. " ERROR_RECORD_DATA
*& Form CLOSE_BDC_SESSION
Form used to close session of the Error Records
FORM CLOSE_BDC_SESSION .
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
WRITE:/ TEXT-010. " Unable to Close BDC Session
ENDIF.
ENDFORM. " CLOSE_BDC_SESSION
*& Form CHK_AND_INS_VENDOR_EXTEND_DATA
This form is used to process BDC data for Vendor Extend
FORM CHK_AND_INS_VENDOR_EXTEND_DATA .
DATA : L_LIFNR TYPE LIFNR.
CLEAR : L_LIFNR, fl_flag4.
sort it_vendor_extend by flag.
LOOP AT IT_VENDOR_EXTEND INTO WA_IT_VENDOR_EXTEND.
W_COUNT = W_COUNT + 1.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_IT_VENDOR_EXTEND-REF_LIFNR
IMPORTING
OUTPUT = WA_IT_VENDOR_EXTEND-REF_LIFNR.
if wa_it_vendor_extend-flag = 'A'.
SELECT SINGLE LIFNR
FROM LFB1
INTO L_LIFNR
WHERE LIFNR = WA_IT_VENDOR_EXTEND-REF_LIFNR
AND BUKRS = WA_IT_VENDOR_EXTEND-REF_BUKRS.
IF SY-SUBRC NE 0.
WA_IT_ERROR-LIFNR = WA_IT_VENDOR_EXTEND-REF_LIFNR.
WA_IT_ERROR-BUKRS = WA_IT_VENDOR_EXTEND-REF_BUKRS.
WA_IT_ERROR-MSG = TEXT-007.
APPEND WA_IT_ERROR TO IT_ERROR.
W_ERR_REC = W_ERR_REC + 1.
CLEAR : WA_IT_ERROR, L_LIFNR.
ELSE.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_IT_VENDOR_EXTEND-LIFNR
IMPORTING
OUTPUT = WA_IT_VENDOR_EXTEND-LIFNR.
SELECT SINGLE LIFNR
FROM LFB1
INTO L_LIFNR
WHERE LIFNR = WA_IT_VENDOR_EXTEND-LIFNR
AND BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
IF SY-SUBRC EQ 0.
WA_IT_ERROR-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
WA_IT_ERROR-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
WA_IT_ERROR-MSG = TEXT-015.
APPEND WA_IT_ERROR TO IT_ERROR.
W_ERR_REC = W_ERR_REC + 1.
CLEAR : WA_IT_ERROR, L_LIFNR.
ELSE.
REFRESH IT_BDCDATA.
CLEAR IT_BDCDATA.
PERFORM POPULATE_BDC_DATA_VEN_EXTEND.
PERFORM CALL_TRANSACTION.
ENDIF.
ENDIF.
CLEAR : WA_IT_VENDOR_EXTEND.
elseif wa_it_vendor_extend-flag = 'C'.
IF FL_FLAG2 = 'X' and fl_flag4 ne 'X'.
PERFORM CLOSE_BDC_SESSION.
fl_flag4 = 'X'.
ENDIF.
REFRESH IT_BDCDATA.
CLEAR IT_BDCDATA.
PERFORM POPULATE_BDC_DATA_VEN_extend.
PERFORM CALL_TRANSACTION_FK02.
CLEAR : WA_IT_VENDOR_EXTEND.
elseif wa_it_vendor_extend-flag = 'N'.
WA_IT_noupdate-LIFNR = WA_IT_VENDOR_extend-LIFNR.
WA_IT_noupdate-BUKRS = WA_IT_VENDOR_extend-BUKRS.
WA_IT_noupdate-MSG = TEXT-019.
APPEND WA_IT_noupdate TO IT_noupdate.
W_noupdate_REC = W_noupdate_REC + 1.
CLEAR : WA_IT_noupdate, WA_IT_VENDOR_EXTEND.
endif.
ENDLOOP.
IF FL_FLAG2 = 'X'.
PERFORM CLOSE_BDC_SESSION.
ENDIF.
if fl_flag3 = 'X'.
PERFORM CLOSE_BDC_SESSION.
ENDIF.
ENDFORM. " CHK_AND_INS_VENDOR_EXTEND_DATA
*& Form POPULATE_BDC_DATA_VEN_EXTEND
This form is used to populate BDC data of Vendor Extend
FORM POPULATE_BDC_DATA_VEN_EXTEND .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_IT_VENDOR_EXTEND-ZTERM
IMPORTING
OUTPUT = WA_IT_VENDOR_EXTEND-ZTERM.
IF WA_IT_VENDOR_EXTEND-REPRF = 'Y'.
WA_IT_VENDOR_EXTEND-REPRF = 'X'.
ENDIF.
IF WA_IT_VENDOR_extend-XPORE = 'Y'.
WA_IT_VENDOR_extend-XPORE = 'X'.
ENDIF.
if wa_it_vendor_extend-flag = 'A'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0105',
BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_EXTEND-LIFNR,
BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_EXTEND-BUKRS,
BDC_FIELD USING 'RF02K-KTOKK' WA_IT_VENDOR_EXTEND-KTOKK,
BDC_FIELD USING 'RF02K-REF_LIFNR'
WA_IT_VENDOR_EXTEND-REF_LIFNR,
BDC_FIELD USING 'RF02K-REF_BUKRS'
WA_IT_VENDOR_EXTEND-REF_BUKRS,
BDC_FIELD USING 'BDC_OKCODE' '/00'.
elseif wa_it_vendor_extend-flag = 'C'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0106',
BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_extend-LIFNR,
BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_extend-BUKRS,
BDC_FIELD USING 'RF02K-D0210' 'X',
BDC_FIELD USING 'RF02K-D0215' 'X',
BDC_FIELD USING 'BDC_OKCODE' '/00'.
endif.
perform :BDC_DYNPRO USING 'SAPMF02K' '0210',
BDC_FIELD USING 'LFB1-AKONT' WA_IT_VENDOR_EXTEND-AKONT,
BDC_FIELD USING 'LFB1-FDGRV' WA_IT_VENDOR_EXTEND-FDGRV,
BDC_FIELD USING 'BDC_OKCODE' '=/00',
BDC_DYNPRO USING 'SAPMF02K' '0215',
BDC_FIELD USING 'LFB1-ZTERM' WA_IT_VENDOR_EXTEND-ZTERM,
BDC_FIELD USING 'LFB1-REPRF' WA_IT_VENDOR_EXTEND-REPRF,
BDC_FIELD USING 'LFB1-ZWELS' WA_IT_VENDOR_EXTEND-ZWELS,
BDC_FIELD USING 'LFB1-XPORE' WA_IT_VENDOR_extend-XPORE,
BDC_FIELD USING 'BDC_OKCODE' '=UPDA'.
ENDFORM. " POPULATE_BDC_DATA_VEN_EXTEND
*& Form DISPLAY_ERROR_REPORT
This form is used to display the error records on the output screen
FORM DISPLAY_ERROR_REPORT .
IF P_VENMAS = 'X'.
WRITE:/ TEXT-O05. " Error List for Vendor Master
ELSEIF P_VENEXT = 'X'.
WRITE:/ TEXT-O06. " Error List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1 SY-VLINE,
2 TEXT-H01, " Vendor Number
17 SY-VLINE,
18 TEXT-H02, " Company Code
31 SY-VLINE,
32 TEXT-H03, " Error Message
100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_ERROR INTO WA_IT_ERROR.
FORMAT COLOR 2.
WRITE:/1 SY-VLINE,
2 WA_IT_ERROR-LIFNR,
17 SY-VLINE,
18 WA_IT_ERROR-BUKRS,
31 SY-VLINE,
32 WA_IT_ERROR-MSG,
100 SY-VLINE.
CLEAR : WA_IT_ERROR.
FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
ENDFORM. " DISPLAY_ERROR_REPORT
*& Form CALL_TRANSACTION_FK02
Form used to Call Transaction FK02
form CALL_TRANSACTION_FK02 .
DATA : L_OPTION TYPE CTU_PARAMS,
L_SUBRC TYPE SYSUBRC.
REFRESH IT_MESSTAB.
CLEAR IT_MESSTAB.
L_OPTION-DEFSIZE = 'X'.
L_OPTION-DISMODE = P_MODE.
L_OPTION-UPDMODE = 'S'.
CALL TRANSACTION 'FK02'
USING IT_BDCDATA
MESSAGES INTO IT_MESSTAB
OPTIONS FROM L_OPTION.
L_SUBRC = SY-SUBRC.
IF L_SUBRC = 0.
W_SUCC_REC1 = W_SUCC_REC1 + 1.
WA_IT_succ_rec1-MSG = Text-017.
IF P_VENMAS = 'X'.
WA_IT_succ_rec1-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
WA_IT_succ_rec1-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
ELSEIF P_VENEXT = 'X'.
WA_IT_succ_rec1-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
WA_IT_succ_rec1-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
ENDIF.
APPEND WA_IT_succ_rec1 TO IT_succ_rec1.
ELSE.
IF FL_FLAG3 NE 'X'.
PERFORM OPEN_BDC_SESSION_fk02.
FL_FLAG3 = 'X'.
ENDIF.
PERFORM BDC_INSERT_fk02.
W_ERR_REC = W_ERR_REC + 1.
PERFORM ERROR_RECORD_DATA1.
ENDIF.
endform. " CALL_TRANSACTION_FK02
*& Form OPEN_BDC_SESSION_fk02
Form used to Open session for FK02
form OPEN_BDC_SESSION_fk02 .
DATA : L_USERID TYPE APQ_MAPN, " Variable to hold user-id
L_GROUP TYPE APQ_GRPN. " Variable to hold value
MOVE P_GROUP1 TO L_GROUP.
MOVE SY-UNAME TO L_USERID.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = L_GROUP
KEEP = SPACE
USER = L_USERID
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11.
IF SY-SUBRC <> 0.
WRITE:/ TEXT-008. " Unable to open BDC Session
ENDIF.
endform. " OPEN_BDC_SESSION_fk02
*& Form BDC_INSERT_fk02
Form used to insert data into BDC session using FK02
form BDC_INSERT_fk02 .
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'FK02'
TABLES
DYNPROTAB = IT_BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7.
IF SY-SUBRC <> 0.
WRITE:/ TEXT-009. " Unable to Insert Data to BDC Session
ENDIF.
endform. " BDC_INSERT_fk02
*& Form display_changed_report
Form to display Updated Vendor data
form display_changed_report .
IF P_VENMAS = 'X'.
WRITE:/ TEXT-O10. " Updated List for Vendor Master
ELSEIF P_VENEXT = 'X'.
WRITE:/ TEXT-O11. " Updated List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1 SY-VLINE,
2 TEXT-H01, " Vendor Number
17 SY-VLINE,
18 TEXT-H02, " Company Code
31 SY-VLINE,
32 TEXT-H04, " Message
100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_succ_rec1 INTO WA_IT_succ_rec1.
FORMAT COLOR 2.
WRITE:/1 SY-VLINE,
2 WA_IT_succ_rec1-LIFNR,
17 SY-VLINE,
18 WA_IT_succ_rec1-BUKRS,
31 SY-VLINE,
32 WA_IT_succ_rec1-MSG,
100 SY-VLINE.
CLEAR : WA_IT_succ_rec1.
FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform. " display_changed_report
*& Form display_nochange_report
Form to display No Changed data for Vendors
form display_nochange_report .
IF P_VENMAS = 'X'.
WRITE:/ TEXT-O12. " No Changes List for Vendor Master
ELSEIF P_VENEXT = 'X'.
WRITE:/ TEXT-O13. " No Changes List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1 SY-VLINE,
2 TEXT-H01, " Vendor Number
17 SY-VLINE,
18 TEXT-H02, " Company Code
31 SY-VLINE,
32 TEXT-H04, " Message
100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_noupdate INTO WA_IT_noupdate.
FORMAT COLOR 2.
WRITE:/1 SY-VLINE,
2 WA_IT_noupdate-LIFNR,
17 SY-VLINE,
18 WA_IT_noupdate-BUKRS,
31 SY-VLINE,
32 WA_IT_noupdate-MSG,
100 SY-VLINE.
CLEAR : WA_IT_noupdate.
FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform. " display_nochange_report
*& Form ERROR_RECORD_DATA1
Form to get Error Message for Changed Vendors
form ERROR_RECORD_DATA1 .
DATA : L_LINES TYPE I,
L_MSG(200) TYPE C.
DESCRIBE TABLE IT_MESSTAB LINES L_LINES.
READ TABLE IT_MESSTAB INTO WA_IT_MESSTAB INDEX L_LINES.
IF SY-SUBRC = 0.
CLEAR L_MSG.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = WA_IT_MESSTAB-MSGID
LANG = SY-LANGU
NO = WA_IT_MESSTAB-MSGNR
V1 = WA_IT_MESSTAB-MSGV1
V2 = WA_IT_MESSTAB-MSGV2
V3 = WA_IT_MESSTAB-MSGV3
V4 = WA_IT_MESSTAB-MSGV4
IMPORTING
MSG = L_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WA_IT_ERROR_fk02-MSG = L_MSG.
ENDIF.
IF P_VENMAS = 'X'.
WA_IT_ERROR_fk02-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
WA_IT_ERROR_fk02-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
ELSEIF P_VENEXT = 'X'.
WA_IT_ERROR_fk02-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
WA_IT_ERROR_fk02-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
ENDIF.
APPEND WA_IT_ERROR_fk02 TO IT_ERROR_fk02.
CLEAR WA_IT_ERROR_fk02.
ENDIF.
endform. " ERROR_RECORD_DATA1
*& Form display_error_report_fk01
Form to display Error Report for Master Vendors (FK01)
form display_error_report_fk01 .
IF P_VENMAS = 'X'.
WRITE:/ TEXT-O05. " Error List for Vendor Master (FK01)
ELSEIF P_VENEXT = 'X'.
WRITE:/ TEXT-O06. " Error List for Vendor Master Extended (FK01)
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1 SY-VLINE,
2 TEXT-H01, " Vendor Number
17 SY-VLINE,
18 TEXT-H02, " Company Code
31 SY-VLINE,
32 TEXT-H04, " Message
100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_ERROR_fk01 INTO WA_IT_ERROR_fk01.
FORMAT COLOR 2.
WRITE:/1 SY-VLINE,
2 WA_IT_ERROR_fk01-LIFNR,
17 SY-VLINE,
18 WA_IT_ERROR_fk01-BUKRS,
31 SY-VLINE,
32 WA_IT_ERROR_fk01-MSG,
100 SY-VLINE.
CLEAR : WA_IT_ERROR_fk01.
FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform. " display_error_report_fk01
*& Form display_error_report_fk02
Form to display Error Report for changed Vendors (FK02)
form display_error_report_fk02 .
IF P_VENMAS = 'X'.
WRITE:/ TEXT-O14. " Error List for Vendor Master (FK02)
ELSEIF P_VENEXT = 'X'.
WRITE:/ TEXT-O15. " Error List for Vendor Master Extended (FK02)
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1 SY-VLINE,
2 TEXT-H01, " Vendor Number -
Error when I create the New material Master (MM01) for New Plant.
Dear experts,
I got the error when I create the New material Master (MM01) for New Plant.
Error: Valuation Area 2800 Not yet productive with Material Ledger.
So Pl send me the solution asap.
Venkata Raju KhottariHi,
Have u assinged Plant to Company code?
If u say no, use T.code OX18.
Regards,
Murali
Assign points if it is useful. -
Material Master for Creating new MM Transaction for creating material
hai techies,
i have a scenario where the client is already using a transaction to catch the related fields like material number, quantity and other related fields. but until now they have been using this as a central source of point to create a material. they have been using this to create materialsy for the service orientation.
Now they wanna use this same for the engineering concept lke creating the material for R and D and engineering BOM etc.
Will this have any change and any new fileds have to be captured for this?
Please advice me on this
Thanking you in advance.
Regards,
Gopalakrishnan.SHi,
You can create New screen ,sub screen with fields as per your requirement in material master and those fields can be linked to different tables and programs as per your business process. -
How to create new filed in vendor master
Dear Guru's,
Our client wants to see all related group vendros, when he post the invoice, now i want to create new field for related group in vendor master, is it possible to create, please tell the process
thanks in advance.
gopi.Hi Friends,
Can anyone help me with Vendor Master creation creation XK01? On create vendor: control screen , when I enter the Customer which I created it gives an error stating Customer 27 is not currently referenced and will be updated accordingly. Can anyone suggest a solution? And do I have any option to assign more than one customer to the vendor I am creating. -
Create new master item by PL/SQL
Hi All
I would like to know about concept of create new master item using by PL/SQL
or any solution to easy.
thank and regard.Hey there,
In order to create items in master items, via PLSQL you'll need to use oracle API for maintining items - EGO_ITEM_PUB.
The procedure you'll need is Process_Item.
Enjoy,
Aaron -
How can I know the new Material Master has been created?
Does anyone have been tried about how to trigger the new Material Master has been created at a time interaval(maybe an hour or a day)?
I want to transfer the new Material Master within a given period from SAP R/3 4.6C to .NET Application through standard BAPI or RFC and .NET Connector 2.0. How can I do?
Any suggestion is wellcome. Thank You.Thank you Jiri Ehrlich for answering my question..
I choose the third way as you suggest..
".. 3) Create your own ABAP function to export whole Material Master, call this function from your .NET application and do synchronizing on .NET side (so your .NET application will be RFC client).."
I've tried RFC that retrieve Material Detail by using BAPI_MATERIAL_GETLIST. It works fine but if I want to retrive the new Material or modified within a given period of time(for example 15 or 30 minutes). How I can do? Is there any standard BAPI or RFC to call from .NET or I have to write new RFC.
I have little background of ABAP so help me please. If I have to create new RFC, is there any ABAP Function to call or which table I can retrive those information.
Anyone can suggest?? Thanks in advance
Maybe you are looking for
-
How to Search for Variable Name in an Apex Page
Hi, Whenever I am writing code and I need to remove a reference to a variable name, I just to a search and replace on the source. With Apex, is there a way to do that on the Apex page definition? I have click on every validation, process, report to c
-
Case recommendations for iPHONE
Is there a thread with suggestions for best cases? if not, what are you iPhoners loving?
-
I would like to format my printable into 8x10 so when I save it as a png it will be 8x10
I would like to format my printable into 8x10 so when I save it as a png it will be 8x10
-
French accents turn into Chinese characters
I'm using Chrome browser on ML, which is all good, but when I read French documents online, sometimes the accents get replaced by Chinese characters. How do I avoid that? I have set Chinese followed by French and last English as my languages of prefe
-
ONKYO TX-SR805 Set-up Menu HELP Needed
This is a LONG post, but I would appreciate if you would read it and respond to it. The settings That are setup might not be the CORRECT settings. If you think a different setting should be made, please let me know. Also right now I only have 2 fro