Creating new inspection lot origin via SPRO

Hi guys.
I would like to know how to create new inspection lot origin via SPRO.
I tried going via SPRO->Quality Management->Quality Inspection->Inspection Lot Creation->Maintain Inspection Lot Origins and Assign Inspection types , but could not find the way.
Thanks in advance.

Hi,
You should 1st create/define the inspection types in OQL1 for your needs then you should assign them to locations.
Have you defined your inspection types?
Check n revert
Shiva

Similar Messages

Maintain new inspection lot origin and assign inspection types

Hi,
I want to Maintain new inspection lot origin and assign inspection types .For Ex: 90, NoRange: 90 DCr :001 ,TL Type : S and Stat : 4 because i want to maintain TL Tpe S- reference operation set.
Please provide me the solution.
Regards,
Niyas.

Hi
As per SAP std You can not create a Inpsection lot origine but you can certainly create a Inspection type.
Just a suggesion..
Try Inspection lot origin: 89 (Misc) NoRange: 90 DCr :001 ,TL Type : S and Stat : 4
and create Inspection type 90 with varient 01/02 in inspection lot origine 01.
This will solve your purpose
Regards
Sujit

New inspection lot after SPCO status

We are creating an inspection with "early lot creation" option. Later we post partially stock (1000 KG) to process order. That stock is posted against Inspection lot-1 for batch-1. So businedd do inspection and post stock from QI to UNR. So system update status SPCO(Stock posting completed) but we haven't made UD and still production is under progress.
Next day business post again 1000 KG to same process order and same batch number, but system creates new inspection lot for same batch-1. Can we stop system to creating new inspection lot for same batch and process order combination? Per our requirements system should updated new stock to excisting insp lot instead of creating new one.
I have tried all different options of "Control InspLot" but in all cases system does create new lot once SPCO status has been set.

Dear Eric
Give the UD when you release the first set of quantity. Then system wont create inspection lot again if you do the GR.
Regards
Gajesh

Assigning inspection lot origin to new movement type

Dear Gurus,
I have created a new movement type. How do i assign inspection lot origin to this new movement type?
Regards,
Abhishek

Dear Sujit,
We are using inspection lot origin 06 for customer returns. However 06 doesn't allow you to post stock. The quality team wants to post the stock to unrestricted or scrap or blocked as per the inspection result. If we use inspection lot origin 05 then we are able to post stock for the inspection lot generated while transferring the stock form returns to quality. Now the problem is for prodn GR that is for FG we r using 05 for the same material. So there is a clash as inspection characteristics for FG and customer return is different but usage is becoming same-5. That's we are trying to create a new movement type 957 by copying 457 but we are unable to create and assign inspection lot origin to it.
Regards,
Abhishek

Re: Changing Inspection lot origin from 08 to 05 for movement type 322 and 349

Reference discussion: Changing Inspection lot origin from 08 to 05 for movement type 322 and 349
With reference to the above discussion and your explanation for user EXIT QAAAT0001, it was stated that:
If you only have two inspection types, you can mark one as preferred. Then with exit use logic that if MM = 311 use preferred inspection type, if 911 use, non-preferred inspection type.
May I ask what are you refer to for MM? It seems like movement type to me, however, I can't find movement type field in the structure within the component of EXIT_SAPLQAAT_002. Appreciate if you could shed some light on this.
Best Regards,
CY
Branched from older discussion by moderator. When there are questions concerning an older discussion, please create a new discussion with reference to the older one. Thanks!

Yes.. you are correct. But with the info that is provided by EXIT_SAPLQAAT_002, you should be able to identify the proper material document in table MSEG which will have the material movement.
You can use the values of plant, batch, material number, Purchase order number, Order number, item number, storage location as well as the current date since the exit would normally be executed on the same date the material movement was done. You'd also probably only execute the logic if QKZ is "X".
Craig

Create multple inspection lots at customer returns

Hi all,
at my comany we've the following problem. Customer returns should be posted to insp stock and an inspection lot must be created. When a customer has multiple return from the same batch it should create multiple inspection lots. We use insp 05 for this. But we also use 05 for the receipt of externally produced materials. This should only create one inspection lot. Therefor it's not possible to set the indicator in the inspection setup in the maerial master.
We had a look at inspection type 06, but this is not stock relevant. What is the best way to set this up?
thank for your help.

Its not the delivery I'm concerned about. Its the other 05 lots that he creates via material movements.
If the Z inspection type is assigned to the delivery type as proposed, the Z inspection type still has an 05 inspection origin. It is the origin that SAP links to material movements not the inspection type. As delivered most inspection types match one to one the origin, i.e. an 05 inspection type to an 05 origin. An 04 inspection type to an 04 origin, etc..
When a movement is used that is linked to the 05 inspection orgin and an inspection is called for, the system looks at the material master and attempts to assign an inspection type with an 05 orign. In this case, they'll be two inspection types active with an 05 oriign. The standard 05 and the Z05.
Now it might work if the Z05 is assigned to the delivery type for returns and the 05 inspection type is marked as preferred. Hopefully the Z05 will get used for the deliveries and the 05 for all others But I'm not 100% sure the system will behave exactly that way. I 've never tested that scenario specifically.
FF

Inspection lot origin don't work in COA

Hello All,
I have created a COA Profile (QC01), Where in I have assign inspection type 89 in the field "Insp.lot origin" and "Inspection Type". Now as per the F1 help suggest I am expecting that system will not allow me to print COA for those lots don't belongs to inspection type 89, but surprisingly it allows to take print out for inspection lot origins for 01, 08 types also.
I am using the STD COA form "QM_QCERT_01"
Taking print from QC21
Pls let me know what and/or where I am missing something!!!!!!!
Regards,
SAPier

Dear,
SPRO > QM > Quality Certificates > Certificate Profile > Define Certificate Types
SPRO > QM > Quality Certificates > Output Determination > Define Condition Types for Output Determination
Standard is Form QM_QCERT_01 you will get it in SE71.
Logistics > Quality Management > Quality Certificate > Outgoing > Certificate Profile (QC01
COA is printed in QC20.
Also refer this nice article by Expert Gajesh,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9002247f-4b7f-2c10-10ac-c6fe29807331?quicklink=index&overridelayout=true
Hope it will help you.
Regards,
R.Brahmankar

Connection between Inspection lot Origin & UD code

Hi Friends
This is a QM issue .
When We maintain UD code in SPRO Quality Management --Maintain Catalogs it is generally for combination of plant & the code
But a code which I had maintained for a Plant is not appearing for Inspection lot origin 89 (AD-Hoc)
Is there a connection between Inspection Lot Origin & UD code ??
Thanks
Arindam

Dear,
To get the UD code folow the steps as below
QS41 - Edit - create catalog group and code (catalog type = 3)
QS51 - Edit - Create selected set - here we are linking plant and catalog group/code created above
Here give the valuation correctly with follow-up action
In SPRO - Quality Management>Quality Planning>Quality Inspection>Inspection Lot Creation>Maintain Inspection Types
for a insp type for which you want the above code to be appeared, in the Inspection lot processing UD selected set file give the above selected set group, so that the selected set group will appear when you go for UD
Coem back if required

Creation of Inspection Lot in QM Module without inspection lot origin

I want a solution regarding creation of inspection lot without assigning inspection lot origin to material code.
We have developed function which creates inspection lot for the material against which PDI is envisaged on the material of a particular Purchase order. In my view we do not require assigning inspection lot origin on the material code as process has been mapped through Qinfo record. By assigning the inspection lot origin on the material is unnecessary step in our process.
Can any body suggest solution regarding above problem.
Yatindra Bahuguna

Dear,
We have developed function which creates inspection lot for the material against which PDI is envisaged on the material of a particular Purchase order.
Little bit stuck up.... can you explain the above in detail...
As I understood you developed a function -
- Which creates material inspection lot
- Which Pre Delivery Inspection applicable on particular purchase order.
YES?
Regards,
Syed Hussain.

[QM] How to create an inspection lot with task list assigned?

Hello, everyone.
I know, the similar questions have been asked plenty of times, but I am still unable to find a suitable receipe of the inspection lot creation. My goal is to create an inspection lot programmatically and be able to record its results using, e.g., BAPI_INSPOPER_RECORDRESULTS.
Creating a lot does not appear to be a big problem. I just call the following FMs:
QPL1_INITIALIZE
QPL1_INSPECTION_LOT_CREATE
QPL1_UPDATE_MEMORY
QPL1_INSPECTION_LOTS_POSTING
BAPI_TRANSACTION_COMMIT
As a result, I have a new shiny inspectin lot, but it comes with statuses "CRTD" and "CHCR". I do specify PLNAL and PLNNR fields values for the QALS structure which is passed to QPL1_INSPECTION_LOT_CREATE, but that does not seem to have any effect. When I call BAPI_INSPOPER_RECORDRESULTS later (result values and inspection points come from another lot which is used as a template), it reports of beging unable to find characteristics for the inspection operations (error E026).
Does anyone know which of the QPL1_INSPECTION_LOT_CREATE parameters affect task list assignment besides PLNAL and PLNR? Or maybe there is a special FM which associates a task list with an inspection lot?
Thank you in advance.

Hi Samuel,
You can get create an Agent as a Task by using the following steps:
1. Go to Customizing --> EHS --> Industrial Hygiene & safety --> Risk Assessment --> Specify Agent Types
2. Click on "TASK' Agent type and click on Details icon (CtrlShiftF2)
3. In the "Only EHS-IHS" drop down, Select "No"
4. Save the entry
5. Now try creating an Agent [CBIH92] and you can create an Agent as a Task.
Hope it Helps,
Raghu

QM Manual Inspection Lot - with Inspection lot origin 89

Hi QM Guru,
I did maintain inspection type 10 in this material but while i would like to create the inspection lot manually.
I try to create manual inspection lot manually , i encounter this error with Inspection lot origin 89.
No valid inspection type for material 10000037 was found or selected
Message no. QA280
Diagnosis
An active inspection type for the material 1XXXXXXX in plant XXXX could not be found for the specified origin 89 or none of the available inspection types was selected.
System Response
Inspection lots cannot be created.
Procedure
Check the inspection type setting in the material master.
Is there anything which i missing ?
Thank you.

Hi,
I hope you have got the answer for this query. You get this error because you are trying to create a manual inspection lot (origin 89) of a material for which Inspection type 89 is not activated.
From your statement,
I did maintain inspection type 10 in this material but while i would like to create the inspection lot manually.
I try to create manual inspection lot manually , i encounter this error with Inspection lot origin 89.
It is clearly stated that you are using different inspection types. As Rama has suggested, activate Inspection type 89 in the material master and make corresponding master data.
Other than that, you cannot create manual inspection lot for the origins 10, 11, 12, 13 & 14. Similarly, Automatic inspection lots cannot be created for origins 07, 15 & 89. This answers your further query raised in the thread.
ntn

Problem when created an Inspection Lot.

Hello PP Guru's,
I have a major problem with Inspection Lot.
I have created an Inspection Lot but forgot to create an Inspection Plan for the Material for which the lot has been created.The Inspection Lot is in CRTD status which doesnt allow me to record the results.
I know one method that I can do GR reversal so that the material can be removed from Quality stock(Lot will come to LTCA status) and then can do GR again so to fetch Inspection Characteristics of the material from Inspection Plan which I have created so the new lot created will be in Release status which allow me to process the lot.
I want to know if there is any other method by which I can Include the Inspection Plan for the Lot which is in CTRD status without reversing GR Document.
Thanks for the help in advance.
Points will be rewarded to useful answers.
Rgds,
Rakesh Wade.

Hi
create the inspection plan appropriately.
Then go to QA32.select the ispetion lot .
Press tab Inspection specifications.
Then press the button 'task list/specification'
It will be assigned.
Then refresh the screen.
The it will solve your problem.
Regards
YMREDDY

Inspection lot origin

hi,
how to assign inspection lot origin for newly created goods movement. is it possible in goods movement

Go to SE12
enter T156sy
Display
Utilities-Table contents-display
execute
Double click on the Movement type
Assign Inspection Lot origin here
Note:-This is not standard SAP .But if this is absolutely necessary then you can use this .
Hope this helps
Naik

Automatic Inspection lot not generated for Inspection lot origin 12

Hi all,
I am not able to trigger the automatic Inspection lot for General Delivery i.e Inspection lot origin 12.
The scenario is, I am creating the STO ( Inter company stock transfer) and against the same STO i am creating the delivery but after delivery inspection lot is not generated. In the material master correct inspection type is maintained also the mvt type 641 is active for QM. The inspection lot origin is assigned to the delivery type in the configuration but still i am not able to generate the inspection lot.
Please let me know i am missing something?
Regards

Hi,
You are missing 1 Config
Quality Management
Quality Inspection > Inspection Lot Processing > Inspection Lot Creation > Inspection at Shipping (Tcode OQL8)
mantain inspection origen agenist Delivery type u are using.
also you need to create Sales Info record(QV51)
I hope all other settings are OK then it should work
Edited by: Jayashankardm on Jan 6, 2010 9:59 PM

Collective UD for 04 inspection lot origin

Hi All,
I need to know about collectived UD for 04 inspection lot origin. In QA16, I do not get any 04 lots. Do I have to go for QA41? Then what are the prerequisites and configurations?
Thanks in advance!

Hi Sujit,
I tried this and made a variant in QA41 too. But some its not working. I searched in google and SDN and found all steps are followed, but its just not working.
My settings are:
1. Auto UD time taken as 12 hours in customizing
2. Auto UD box ticked for material
3. In QA41, created a variant (In full screen)
4. Inspection lot selection taken as order confirmed
5. UD codes, plant all set
Now what i feel i am mistaking in scheduling the variant. Can anyone please let me know the steps to schedule it?
My scenario is: for 04 type materials, I want to do a collective UD when lots are OK
And Do I have to assign to any material?
Thanks!
Edited by: SAPQM11 on Sep 15, 2010 8:00 AM

Creating new inspection lot origin via SPRO

Similar Messages

Maybe you are looking for