Creating New Process Types

Hello,
Great to hear from anyone who has created a non-ABAP process type and included in the process chain.
The interface methods and how they get called and/or check status etc. are not documented or at least I cannot find them.
Thanks
Mathew

Hi Bill,
Thanks for the info. You can also create process types similar to the Load IP process type which react to certain events like right click etc.
For example, if you wanted a new process type that checked for its status within the last xxx hours and then bypasses itself or run itself based on a set of rules.
If can be done as an ABAP program with possibly a variant for the IP name, time etc. which can then be attached to a process chain or can be programmed similar to an existing non-ABAP process type, say similar to the Load IP process type.
What I was looking for is some documentation or feedback from others who know about the methods used ...there all have to conform to some OO based interface but there is little by way of documentation on it.
Ta Mathew

Similar Messages

Can we create new partner types for quallity notifications in SAP system?

Can we create new partner types for quallity notifications in SAP system?
The business requirement is to limit the available entries for partners displayed when they search in quality notification. I have already created new partner functions & assigned the relevant partner types, however struggling with defining new partner types.
Would appreciate help in resolving this.
Thanks,
Nilesh

I know this customisation setting ...It allows us to create the partner functions & assign it to the partner determination procedure.
Then you can assign the procedure to the notification type.
This customisation setting does not solve the problem I have.
I'm looking for the partner type creation process which we assign to the partner function.
Edited by: NILESH BHAVE on Aug 12, 2010 3:06 PM

Creating new order type in OPJH

Dear friends,
I wants to create new order type for my process order in t.code OPJH.
While creating so, i have given order category as "40" (for process order) & Order type as PI01. But system says that the key "PI01" already exist. But in the order type overview screen the system is NOT listing PI01 in the selection list ( If i press F4).
Could any guide , how to create order type for process order?
Any help will be awarded
Thanks
Senthil

Hi friends,
Thanks..I have found solution. Instead of OPJH, we have to look into CORN for process order.
Senthil

Create new Documentation types for Template project

Hi Expert,
Can anyne tell me the process for creating new documentation types under projects standards tab under solar_project_admin for project?
Thanks,
Basis Admin

Resolved !!!!!

New Processing types

Hi,
I would like to know where can we create a new processing type.
How do we create different processing types for different attendances/absence types.
Thank you
Shravan

Hi Arya,
Processing of absences are definded via the counting classes in the payroll . You can define Counting Classes for Absence Valuationin the table V_T554E
Regards,
Kapil

What is the need of creating New order type in PO

Dear Experts,
I have a doubt in MM, what is the need of creating New Order Types? Please explain with Business scenario. Thanking you,
Regards,
Elangovan.A

Hi Elangovan
Whenever you have a doubt like this...
--- just verify the config settings for your parameter (order type here).
---Also check whether authorizations can be given for this ?
---Do you need it for specific analysis ? Are there standard reports/listings available ?
So, some of the uses of order type are:
1) What are the parameters controlled by order type ?
It controls the number ranges and screen layouts etc. So, if you want to have different set of number ranges and different screen settings, then you may need a new order type.
2) Authorizations can be controlled with order type.
3) You can also use it in analysis/listings
Best regards
Ramki

Problem in creating New output types - Urgent

hi all,
Issue is that we had created a new plant(NSC) and for that plant, we had created new scripts for Indent and Sales Order. Means I have to create new output types for NSC Orders and Indents.
What i did that I went to SPRO- IMG- Basic Functions- Output Control- Output Determination- Output Det using Cond Tech- Output Det for Sales Documents , created new output types ANSC and BNSC for AN00 and BA00 respectively.
Then Output Types assigned to Partner Functions. Then I went to 'Maintain output determination procedure' and copied V06000 (Quotation Output) and V10000 (Order Output) to ZV0000(NSC Quotation Output) and ZV0001(NSC Order Output) respectively.
Then I went to ZV0000(NSC Quotation Output) and ZV0001(NSC Order Output) determination procedures and changed outputtypes to ANSC and BNSC instead of AN00 and BN00.
Now what should i do next?? I went to 'Assign Output determination procedures' but here no new entries can be added and I cant find procedures which I created.
Any ideas please??
Regards,
Aisha Ishrat
ICI Pakistan Ltd.

HI,
follow this steps:
1. In assignment u have to assign ur new output to respective documents
eg: Assign ZV0000(NSC Quotation Output) to QT sale doc type
2. After doing this u have to maintain condition record
goto tcode: VV11-> here enter ur condition type which u have defined-> inside fill in the details--> now click the <b>communication</b> ikon in top--> fill in the details
this is solve ur purpose
regards,
Arun prasad

How to create new agent types in transaction CBIH92.

Hi guru's,
Can anybody tell me how i can create new agent types .
thanks and regards,
Pronoy.

Hi Pronoy
Agent types are not created in CBIH92, those have to be created in IMG setting as per following path
SPRO --> Environment, Health and Safety --> Industrial Hygiene and Safety --> Risk Assessment --> Specify Agent types
Hope it will help you.
Regards
Vikram

Creating New Material Type

Hi,
While creating new material types what things should be taken in to consideration?
If i want to create it by using copy function which ref. material type we should select and why?.e.g. ZSCRAP- Scrap Material

Dear Ashutosh ,
Grouping of Material that have same basic properties can be assigned to one material type.
While creating new material types following points to be considered as material type controls following things,
1) Material is intended for certain purpose ( For ex consumption)
2) Whether material Number to be assigned internally or externally
3) Number range intervals
4) Screen sequence & which screens to be appeared
5)Which user data can be entered
6) Which procurement type ( Internal or external)
7) Inventory management i.e. value & qty update required..
You can also change material type for a material under following conditions.
1) Old & new material type must be assigned to same account category,
OR
2) No. open PO ,stocks or reservations
I hope this will clarify your doubts,If found useful please reward points
Vivek Maitra

Steps to create new movement types

Hi Folks,
I need to create new movement type, please let me know the steps that i need to follow.
Thanks,
Regards
Raghavendra

Dear
Please follow the steps in below link and create new Movement type
http://www.sap-basis-abap.com/sapmm015.htm
http://help.sap.com/saphelp_40b/helpdata/ru/fc/6cec6eb435d1118b3f0060b03ca329/content.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/new-movement-type-1857755
Regards
Aamir

How to Create New Activity Type for Assiged to work centre Costing in Acti

Dear Sir,
We have four activity type to assigned in workcentre Costing Activity. Details are as under
AIRJET     2010     AIRJET
DONIER     2010     DORNIER
SULTEX     2010     SULTEX
SULZER     2010     SULZER
in addition one more loom is comming in our unit and require new activity type.
How can i create new.
Please guide.
Thanks in advance
Regards
Ajit

Dear ,
To create new Activity Type , you need to follow the below steps :
KA01 - Create Primary Cost Element for the new activities type.
KL01 - Create Activity Type tied to the primary cost element.
KP26 - Change Activity Type/Activity Price Planning - maintain the Variable price
Assign the activity type to cost center using T code KP26.
In the input screen of T code KP26 ,enter version as 0, from period 1 and to period as 12 and the Fiscal Year as 20xx.
Click on Overview tab on top and key in costing details in this screen.
After performing this ,while creating the work center ,this combination of activity type & cost center should be assigned.
At work centre level , you should have
1.Create Standrad Value Key -OP19 and Formula Key in OP49.
2.Create Formula Parameters in OP7B or u can use existing one to assing in the Standard Value Key
3.In CR02-Assing the Standard value key in Basic Data and select the Formula Key in Costing tab with cost centre assingement .Save
Try and check
Regards
JH

To create new billing type and document type and put restriction for any pa

Hi,
please let me know the procedure for creating new billing type.
Can we restrict billing type to document type for any particular country by defining it in user exit.
Rgds,
Dharmesh

Hi,
>
> please let me know the procedure for creating new billing type.
>
Goto menu SPRO->Sales and Distribution -> Billing -> Billing documents -> Define billing types. Here highlight one of the standard SAPbilling type (which may be relevant to your business requirements), then click on copy as button to create a new one. You need to name that should start with Z, for example ZF2 and then save it.
>
> Can we restrict billing type to document type for any particular country by defining it in user exit.
>
This you can achieve in copy control settings. Go to menu SPRO->Sales and Distribution -> Billing -> Billing documents -> Maintain copy control for billing documents. Here you can select, according to your scenario, copy control to deliverydocument to billing document or Sales docuement to billing document.
Then, here also you can copy the standard copy control document types provided by SAP, and rename to your newly created Zdocument type. The source doucment (delivery or sales order) is normally assigned to a particular sales organization (which to a company code). Normally the company code is created in a particular country, hence the billing document falls only on that country.
Regards,

New Process type:Is the previous run in the chain still active?

Hi,
Please provide details of the new process type Is the previous run in the chain still active? In SPS 12. Thanks in advance.

Hi,
did you see that post. it says it is a mistake and will be removed.
New Chain Process Type: Is the previous run in the chain still active?
regards,

Field Ref. and SRef,mat type when creating new material types

Hi,
While creating new material type we are giving the Filed ref. on that basis sytem find which fields are option mand. etc. below the filed ref. there is also SRef for material type , why this fileld is use ? if this is screen sequence ref. then what is use of industry sector when creating material bcoz industry sector also determines the scrren ref. then which will follow when we creat the material.
regards,
zafar

Hi,
SRef is the Screen reference .
You have to create the Sref then it should assign depending on the transaction.
Grouping of transactions that determines what screens are displayed depending on the transaction when you maintain material master records. It also determines the order in which the screens appear.
The screen reference Transaction is in table T130M.
In material master the first reference is industry sector,then specific to the industry sector what is the material type & screen sequence.
Regards,
Raj

Win8RP: Failed to create new process "...javaw.exe" - Invalid argument

Hi all,
we have a huge Java (JRE 6.0.310.5) app that works fine on the Win 8 CTP, but on RP:
Failed to create new process "C:\Program Files (x86)\...\jre\bin\javaw.exe" - Invalid Argument
Thanks for any insight
G.

Hi,
Based on the error message 'Caused by: com.sap.engine.services.jmx.exception.JmxSecurityException: Caller J2EE_GUEST not authorized, only role administrators is allowed to access JMX' , this note shall solve this issue:
948970 - Caller J2EE_GUEST not authorized, only role administrators
Also check if the ADSUSER and ADS_AGENT have the correct password and the respective roles.
944221 - Error analysis for problems in form processing (ADS)
Which is your NW version?
Regards,
Lucas Comassetto.

Creating New Process Types

Similar Messages

Maybe you are looking for