Creating New Sequences in CC?

I downloaded the trial and am having a hard time with new Sequences:
1. There does not seem to be a new sequence settings option when you create a new project. Is this correct?
2. When a new project opens I do not have the option to drag a file from the project into the Sequence/Timeline and I can not create a new Sequence. How is this handled?
Thanks!

Usually you have some sort of footage that will be imported, otherwise you wouldn't have anything to edit. So my workflow goes like this—even before the New Sequence dialog was removed (and I LOVE that it's gone!).
1. Visit the Media Browser to locate and import some footage.
2. Only after you have some footage, do you really need a sequence, right?
3. Choose which footage represents the parameters of your project (i.e. The footage from your RED Epic (4K), or the footage your client grabed on his Canon PowerShot (720p). Just an extreme example of mixed footage, mind you.
4. Drag that footage to the "New Sequence" button (bottom corner of the Project panel) and let go.
BAM! New sequence matching every setting from your best footage. Does that help?

Similar Messages

Can't Create New Sequence

FCS2 Upgraded and updated yesterday.
For some reason starting today I can't create new sequences. New Sequence doesn't make a new sequence in any of the bins (but doesn't crash - just nothing happens), whether from the File menu or right-clicking in a bin.
Importing XML (from Color or even via Color > Send to FCP) doesn't create a sequence either.
Creating a new project gives me an empty project, with no sequences in it either.
Anyone?

And, as always, FCP Rescue can make backing up or trashing your preferences nice and easy.
http://fcprescue.andersholck.com/
Once you've got a functioning preference set, you can back it up to restore later in case this happens again.
--Tex

Create new sequence for GoPro HD camera in CS5

Can someone help me create a sequence in CS5 for a GoPro HD camera. Which preset should I start with or what values should I change in the New Sequcne Window on the general tab?
Here are the video details from a file using mediaplus. Pixel Aspect Ratio: 1.0
Thanks in advance.
Format                           : MPEG-4
Format profile                   : JVT
Codec ID                         : avc1
File size                        : 1.22 GiB
Duration                         : 14mn 22s
Overall bit rate                 : 12.1 Mbps
Encoded date                     : UTC 2010-05-16 10:32:39
Tagged date                      : UTC 2010-05-16 10:32:39
AMBA                             :
Video
ID                               : 1
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : Yes
Format settings, ReFrames        : 2 frames
Format settings, GOP             : M=3, N=15
Codec ID                         : avc1
Codec ID/Info                    : Advanced Video Coding
Duration                         : 14mn 22s
Bit rate mode                    : Variable
Bit rate                         : 12.0 Mbps
Width                            : 1 280 pixels
Height                           : 960 pixels
Display aspect ratio             : 4:3
Frame rate mode                  : Constant
Frame rate                       : 29.970 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.326
Stream size                      : 1.20 GiB (99%)
Title                            :     GoPro AVC
Language                         : English
Encoded date                     : UTC 2010-05-16 10:32:39
Tagged date                      : UTC 2010-05-16 10:32:39
Audio
ID                               : 2
Format                           : AAC
Format/Info                      : Advanced Audio Codec
Format version                   : Version 4
Format profile                   : LC
Format settings, SBR             : No
Codec ID                         : 40
Duration                         : 14mn 22s
Bit rate mode                    : Constant
Bit rate                         : 128 Kbps
Channel(s)                       : 2 channels
Channel positions                : Front: L R
Sampling rate                    : 48.0 KHz
Stream size                      : 13.2 MiB (1%)
Title                            :     GoPro AAC
Language                         : English
Encoded date                     : UTC 2010-05-16 10:32:39
Tagged date                      : UTC 2010-05-16 10:32:39

Hello,
What I did for CS4 , that does not have than function.
Create a new project, pick the AVCHD 1080 30p present as a basis, and then go to the "general" tab and save it with a different name, like "GoPro R4 mode"
Then close Pr, open the preset you just saved with a text editor like notepad , and search and replace "1920" for "1280", and "1080" for "960"
That´s it, it works.
Gonza
edit: mmm Im not sure if its ok... when I open the preset it says 1280x960, all good. But then when I go to sequence > properties it says 1920x1080 ...

Is it better to create new sequences or new projects?

hello! i'm working on something where i have to take hours and hours of dvd videos and edit them into different parts and them export them with compressor for the web. My question is, when I'm editing these different segments that are about 30 minutes each, is it better to edit each one in the same project and make an individual sequences for each one or should i create a whole new project for each video? i don't want to make too many sequences if it's going to slow the computer down or something, I'm not really sure what to do here, thanks a lot for any help!

Make a separate project for each if they are meant to be self contained 30 minute movies.
When I work with multiple sequences, it is only to isolate a segment of a movie. The finished cut is copied into the master sequence.

FCP will not let me create a new sequence

I have been working on a doco project with many multicam clips, single angle clips, all in prores 422 1920x1080 30p, except a couple of clips that are NTSC DV. Anyway, all was well, and I ended up with a number of sequences (~10) with 5 that are what I am calling final. I sent my first sequence to color, and did my cc, and then sent back to FCP. All was fine, except the sequence does not make it back to FCP. In trying to sort it out, I also find that I am no longer able to create a new sequence at all. I can create a new project and copy sequences from one to another, but even in that new project, i can not create a new sequence. I can click it, but nothing happens. If I close the original project, and start with a blank project, then I can create new sequences there.
So, the next thing I tried was to create a blank project, copy one of my final sequences (5 minutes long) from the orginal to the new project. Then I closed the original and sent to Color from there. I can then send back from color, I get my new sequence, but all of the multiclip media is now off line, and I can not locate it because after returning from color, the clips have strange names.
Also- I began getting the odd error 34 when opening this project recently. So I suspect something is corrupt, but am unable to find it. I have to deliver on this one at the end of the week and am beginning to sweat. Any ideas are apprecieated!

How about opening the original project that you SENT TO COLOR from? That is what I do. I haven't tried a new project.
Shane

Is there a way to create a sequence automatically from a clips settings?

I know you can go in and look at the settings and manually input them into the sequence, but I wondered if there was a way to ideally cntrl click (or something like that) the imported clip and "create new sequence" using the clip settings rather than doing it manually?
If there's not a way to do this, it would be a really handy feature for those of us dealing with multiple formats.
Thanks in advance.
Steve
G5, G4

About as close as you can get is to right-click on a single clip and Make Multiclip Sequence. Hit OK to make an sequence out of the single clip. Open the sequence made and delete the multiclip and edit the clip you want back into the sequence.

Create New Access Sequence for Free Goods

Hi Guru,
please help me, I need to do a new Access Sequence for Free Goods, different from standard SAP. (Vendor/Material/Purch. organization)
The new sequence of access for "Vendor/Plant/Material", I have already created, but at the time that the use in condition, being created PO not shoot the discount goods. (despite having loaded a record condition with MBN1)
Please help me, to create a condition of discount goods that shots for "Vendor/Plant/Material".
Tank you
Miki

Thank you for your interest,
but unfortunately I have already made this assignment Field.
Please help me, there must be a way to run the discount goods.
Tank you
Miki

I create a new sequence, put the clips in the timeline, save sequence, click on another sequence, then return to the recently created sequence, and it's blank. ??

I have created a new sequence, dragging my subclips in. All looks fine. I save. I return to another sequence, then go back to my recently created sequence, and it is blank.

You really should keep your contacts in your Personal Address Book.
You can drag and drop contacts between address books.
When sending a message, and the recipient isn't in your address book yet, Thunderbird automatically adds the recipients email address to Collected Addresses. You can turn that off though.
To create a mailing list:
http://kb.mozillazine.org/Thunderbird_:_FAQs_:_Create_Mailing_List

Premiere Pro CC doesn't create a new sequence with a new project

I feel sure I must be missing something, but when I create a new project in Premiere Pro CC, it doesn't automatically create a new sequence.
In CS6, creating a new project would cause it to pop up a list of sequence presets and then create a new, blank sequence for you.
In CC, once you've created a project, you're left looking at an empty timeline. You then have to go up to File, New, Sequence, and do it there.
Seems like a strange extra step to include, no?
Is there a setting I haven't found then makes CC create new projects with a sequence as CS6 does?

Yes, as Jim mentions, there are other ways to create a sequence. For example, just import your footage, and then with one clip selected, choose File > New > Sequence from Clip. Or in the Project panel, drag a clip to the New Item icon. Many find it easier to create the sequence that way, rather than reading through all the settings in the New Sequence dialog and trying to figure out which attributes fit the media they are working with.

Step to create new access sequence

Hi SAP gurus,
Can anyone teach me how to create new access sequence?
I am zero knowledge on this. Need help from A to Z.
I only know how to maintain the pricing VK11.
If the info already discuss before, kindly need ur kindness to link it for me...

Hi you can define access seq. in T-code v/07
You can define prices, discounts, and surcharges at various levels. Each level
is defined by a condition table. An access sequence consists of one or more
condition tables. The order of the entries in an access sequence defines the
hierarchy of the various levels. The system determines the condition records
in the sequence specified.
Within each access of an access sequence, you can specify the document field
or source field with which an access is performed. You can make access
dependent on requirement to avoid unnecessary access, thus reducing the
system load.
For better understanding go through pricing procedure.
Reg pricing procedure.
1. Use transaction code v/07 to create a access sequence and assign tables based on which you want to carry on
pricing as accesses.
2. Use transaction code v/06 to define condition type. It can be for base price, discount, freight etc.,
(Do assign relevant access sequence)
3. Use transaction code v/08 to define pricing procedure.
4. Assign this to your relevant sales area+ dpp+cupp.
I hink it will help u.
Best Regards
Sainath

Unable to create new in form builder

I'm currently using oracle 9i and within form builder, i've built a form with three tabs consisting of data taken from a table, and 2 views.
I've also created a sequence in sql+ that starts with 6 so i can use it to add new serial_no.
But the problem is whenever i press the create button which really is pl/sql code
SELECT no_serial_sequence.NEXTVAL
FROM dual;It doesn't creates a new record, instead it changes the current record.
Can anyone please give me some suggestions on where to look for errors?
Thanks in advance. B)

Can you send the command with which you create sequence.
Thanks

Need help in Creating a sequence

Hi,
I need to create a sequence which starts with the value one more than max value of one of the columns in a table. Can anyone help me in this regard?
Eg: I have a table 'User_Details' with one of the columns as 'ID', I need to create a sequence for this table which starts with one more the 'max(ID)' if there are any records already existing.
Thanks,
Raghu

Assuming that you have some way to identify which columns of which tables will be populated by sequences in the new release, the you could write PL/SQL code to automatically generate this. In this example I have assumed that you need a sequence created forthe (single) numeric PK column of each table in a particular schema, and that the sequence name will always be table_pk_seq.
DECLARE
   l_max NUMBER;
BEGIN
   FOR r IN (SELECT c.table_name, cc.column_name
             FROM user_constraints c, user_cons_columns cc
             WHERE c.constraint_name = cc.constraint_name and
                   c.constraint_type = 'P') LOOP
      EXECUTE IMMEDIATE 'SELECT COUNT(*) FROM '||r.table_name INTO l_max;
      l_max := l_max + 100; --just to be safe
      EXECUTE IMMEDIATE 'CREATE SEQUENCE 'r.table_name||'_pk_seq '||
                        'START WITH '||l_max||' INCREMENT BY 1';
   END LOOP;
END;John

How to create a sequence for an particular item in my apex form

Hi friends,
I created an database application, of a form with a report, and it is working fine...
But in my form, i have a requirement....The below are the existing fields in my form
issue no
created by
start date
status
priority
due date
Among these fields in my form i need to create a 'Sequence' for my field "issue no",
So that whenever i opened the form the 'issue number' must generate automatically like 1 for the first time, 2 for the second time and so on..
For that i created a sequence
CREATE SEQUENCE "ORDERS_SEQ"
MINVALUE 1
MAXVALUE 999999999999999999999999999
INCREMENT BY 1
START WITH 1000
NOCACHE
NOCYCLE;
But for validation where i need to write the sequence query for the particular item 'issue no'....i dont have any idea of where to write the validation query for the sequence..
please tell where i need to write in step wise manner..please help me friends...
As the below is my validated sequence query for item 'issue no'
'select seq.issue_id.nextval into issue_no'
This is my above validation query whether the query that i mentioned is right..if not let me know the validation query..
And also i need where to apply this validation query in steps..
Thanks in advance
Regards,
Harry...

Harry,
Rik is on the right track. Here is a sample insert trigger: Would need to substitute you sequence ORDERS_SEQ with my sequence las_log_seq, how you define or use timestamps is up to you.
DROP TRIGGER LASDEV.BINS1_LAS_LOG_TBL;
CREATE OR REPLACE TRIGGER LASDEV."BINS1_LAS_LOG_TBL"
   BEFORE INSERT
   ON las_log_tbl
   FOR EACH ROW
BEGIN
   -- Description: Insert log_seq, creation_dt, creation_id,
   --              lst_updt_dt and lst_updt_id.
   -- Maintenance:
   -- Date        Actor          Action
   -- ====        =====          ======
   -- 07-Sep-2010 J. Wells       Create.
   :new.creation_id := nvl( v( 'app_user' ), user );
   :new.creation_dt := SYSDATE;
   :new.lst_updt_dt := :new.creation_dt;
   :new.lst_updt_id := :new.creation_id;
    SELECT las_log_seq.NEXTVAL
      INTO :new.las_log_seq
      FROM DUAL;
END bins1_las_log_tbl;
/Heff

How to create a sequence based on name, country, city, year, month, number

Hello,
I am using Application Express 4.2.1.00.08
I am new to apex and i need some help in creating a sequence.
I am creating an application where i profile people and i need to create an auto sequence that when the person is added to the database he will have his own sequence based on his name, country, city, year he was added, month he was added and his number.
This is a bit tricky because each person will have a different name, country city etc.
How can this be done ?

Hello,
I have to create a sequence so that when for example an employee is added using a form his ID will be saved based on his name, country, city, year he was created, month he was created and his number.
However, each employee is diff, so when you add another employee to the form his ID will be different, different name, country, city etc..
This has to be automatically generated.. is this possible?

Is there a way to create a sequence by using multiple playlists?

Is there a way to create a sequence so that music from several playlists is played in a specific order.
For example:
1 song from playlist 1
3 songs from playlist 2
5 songs from playlist 3
1 song from playlist 4
After which it restarts.

No. Create a new PL with the sequence that you want. You can tell the PL to repeat itself.
MJ

Creating New Sequences in CC?

Similar Messages

Maybe you are looking for