Creating new shipping group?

Hi,
I have created new shipping group.i intialized that in shipping group container service.when i am displaying shipping group values in jsp page.i am getting error like*"shipping group contains no item relationships"* instead of commerce item values for my new shipping group.
why am i getting this .
can anybody help this..
thanks in advance

By default order creates a hardgood shipping group . When a CommerceItem is added to the Order, that item is automatically a part of the default ShippingGroup because it is assumed that when there is only one ShippingGroup, all items are a part of that group. However, once a second ShippingGroup is added to the Order, the existing CommerceItem and any new commerce items must be explicitly assigned to one of the two shipping groups; any items that were in the default ShippingGroup are no longer a part of any ShippingGroup.
For further reference
http://docs.oracle.com/cd/E23507_01/Platform.20073/ATGCommProgGuide/html/s0805assigningitemstoshippinggroups01.html

Similar Messages

Creating new Material Group

Hi SAP Gurus,
How to Creating new Material Group?
Regards,

Hi,
Go to OMSF and here click on "New Entries" button and maintain the Material Group and its Description and save.
Config Path: - SPRO > Logistics - General > Material Master > Settings for Key Fields > Define Material Groups

How to create new storage group and mailbox database on exchange 2007 CCR

Hi, Our Environment:
Exchange 2007 SP3 CCR.
Now I want to create a new storage group with edb file and log files on the new drive.
My plan is as below:
Once we have new drive ready on both active node and passive node,
1): Create new storage group with log files for this new storage group on other new drive from Active Node.
2): Create new mailbox database under this newly created storage group with the DB file on the new drive from active node.
My question is:
1): Do I need to perform above steps from active node only? or Do I need to do it from both active node and passive node?
2): How many storage groups can we create on one Exchange 2007 Enterprise server, we already have 25 SGs in place.
Thanks in advance.

Hi,
Here are my answers you can refer to:
1. We can just create new storage group on the active node. And it’ll be replicated to the passive node.
We can use the following command in EMS to verify the new Storage Group is being replicated to the passive node:
Get-StorageGroupCopyStatus "Second Storage Group" | Select SummaryCopyStatus,CCRTargetNode
http://exchangepedia.com/blog/2007/08/how-to-create-new-storage-group-in-ccr.html
2. For Exchange 2007 enterprise version, we can have up to 50 storage groups:
http://www.computerperformance.co.uk/exchange2007/exchange2007_storage_groups.htm
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Create New Material Group included in Fiscal Year Range

Hi,
I have Report Maerial Group, Material & for each one having Fiscal Year
I want to create new Material Group XXX and be included in the range of fiscal year K1 & K2
How do I connect these two fiscal year to the new Material Group
Thx

Hi
I hope there is no assignment of GL account to material group. If you want that, you can assign Valuation class to material group in OMQW transaction.
Because of the valuation class, the system can find the assigned G/L account number in OBYC. In this case Transaction Key GBB and General modification VBR.
is it fine for you?
regards
Srinivas
Message was edited by:
Srinivas Ponangi

Complete step by step procedure to create new material group.

Hi,
Please suggest procedure to create new material group in R/3 system and assigning it to G/l account.
How to reflect it into EBP ssytem.
Many thanks in advance.

Hi,
T. Code: - OMSF
Path: - SPRO >> Logistics u2013 General >> Material Master >> Settings for Key Fields >> Define Material Groups.
Select existing material group and click on Copy As button.
Enter material group code, material group name and long description for material group.
Then click on save button for save material group.
Regards,
Mahesh Wagh

ERROR :APP-PER-289381 While Creating New Business Group

Hello,
When i am creating new business group in new fresh implementation i am find this error.
APP-PER-289381: A business group with this name exists. Please enter a different name.
I have only Default business group: 'Setup Business group'
Please can any provide a solution for this.. Your early response will highly appreciated.
Thanks
Mohsin

Hi Mohsin,
whatever name you are trying just run the below query to check if it already exists or not.
select * from apps.per_business_groups where name = 'Give here the name you are tyring'
If this returns any row means name already exist in deed. You can rename the existing business group and then create new on. However, if name doesnt exist, wait for any other reply in the forum.
Thanks,
Avinash

UWL - Subsitution rules: create new tasks group

Hi all,
When creating new substitution rules in UWL, we can choose between three task groups (All, Disciplinary, Professional).
Is it possible to create new task grouping, and so, group task by task type/ID ? How can I define new grouping?
Thanks a lot in advance,
Cheers,
Olivier
Solved.
Edited by: Olivier Gaspard on Aug 26, 2009 12:35 PM

This can be achieved by maintaining task classes and assigning substitution profiles to task classes as per your needs.
Then you can assign the required tasks to the task classes.
There is a very well explained document on this scenario.
Check this document to achieve what you are looking for:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/109d2ea2-035c-2c10-06be-f6165ba7af11?QuickLink=index&overridelayout=true
Hope it helps !!
Thanks,
Shanti

To change charging account upon creating new emp group

Dear experts,
Our company want to create new emp group.I have problem to understand concept of employee grouping
account determination.
1. How do I know the new emp group that i created goes to what emp grouping.
2. If I want to change to new grouping, what should I do
3. How to check whether the emp grouping that I created goes to the coorect emp grouping
I'm quite worry if i'm make mistake during creating new em group.
Thanks in advance

if your Question is related to posting
Than try to configure the Symbolic accounts as per the ESG for more info read the documentation and use of the feature PPMOD
or else if you are looking at for the Groupings of EG and ESG
SM30 , V_503_ALL
After cofigureing you will be haveing Testing or UAT right so not a problem with any Errors or issues

Create new purchasing group

Hi expert,
please guide me how to create new purchase group for company code 0122, purchase org 0233.What else need to be set up in config in terms of functionality? guide me step by step with detail path and tcode.
Thanks

Hi,
Folow this path
SPRO-> Materials Management> Purchasing-> Create Purchasing Groups-->execute>New entries>enter 3 digit Purchasing group, Description and other detail if required and save.
This purchasing group we have to assign to Material master in Purchasing view .
Main purpose of Purchasing group is as below
Purchasing Group
     Key for a buyer or a group of buyers, who is/are responsible for certain
     purchasing activities.
Use
     o   Internally, the purchasing group is responsible for the procurement
         of a material or a class of materials.
     o   Externally, it is the medium through which contacts with the vendor
         are maintained.
Hope this will help you.
Thanks
Krishna

Creating new Bridge Group names in Cisco 5508 WLC??

How do we Create new Bridge Group names on Cisco 5508 WLC, with 1552E Access Point??

You create it on the 1552 once the AP joins. One it joins, you will have to choose that AP and then set the AP mode to Bridge and then apply. This will reboot the AP. Once the AP comes back, you will have a MESH tab on that specific AP or any AP that you have set to Bridge mode. You then set the AP role and the bridge group name there. Here is an older MESH deployment guide to follow.
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0/configuration/guide/c70/c70mesh.html
Scott

Want to create new protection group for 2 members which are already under another protection group.

Want to create new protection group for 2 members which are already under another protection group. I have 12 servers under xyz protection group, want to move 2 members server to new protection group. How it is possible without loosing current backups.

Hi,
It all depends if the data source was originally co-located on the same replica shared with other data sources. If not then DPM will simple re-use the same replica and pick up where it left off. If it was co-located, then the old replica and RP
volume is shared and the RP's will expire as new ones are made on the new replica and RP volume created when it's re-protected.
Moving Between Co-Located and Non-Co-Located Protection Groupshttp://technet.microsoft.com/en-us/library/ff399045.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Error while creating new release groups in PO release strategy

Hi All
I was creating a release procedure for PO and after completing steps, Create Characteristic and Create class & while creating new release grp with the class created i am not able to save it and the error message is (ME492) is" Only one release class should be used within the release groups for overall release...".
But i am able to create from an already existing CLASS and able to proceed further.( Note: I am using the training module and in the learning stage.)
Thanks for your support.
Illan

Dear,
Please follow below mention path.
*and check any things is missing, If you can go in bellow mention hints you cans create easily purchase release streatgy.*
*- Follow below mention path.*
*SPRO -> Material Management -> Purchasing -> Purchase Order -> Release Procedure for Purchase Orders.*
*Three steps involved in release process of purchase order.*
**Edit Characteristic     Create characteristic for release purchase order. If you want to release purchase order on purchasing group base. So you can create characteristic for purchasing group. Take reference of CEKKO structure and BKGRP field for purchasing group in additional data of characteristic. E.g :- Purchasing group - BKGRP**
**Edit Class     After creation of characteristic, create class for release purchase order. In which you can take reference of Class Type: - 032,Status: - Release,Class group: - Release strategy class,And put reference of your characteristic, which are created by you in first step.E.g: - Class - REL_PO**
*Define Release Procedure of purchase order     In this step four processes involved.o     Release Groupso     Release Codeso     Release indicatoro     Release Strategies*
Now see each steps of Define release procedure of purchase order in briefly: -
Release Group     In which you can define release strategy groupExa.: - Release group : - 01,Release object: - 01, Class: - REL_PO.
Release code     In which you can define release code. Enter value as Release group: - 01,release code: -01 - Purchase Head,Release group: -01, release code: - 02 - Auditor
Release indicator     In this step you have to define release indicator.Like X - Blocked, I - Under process, S - Release
*Release Strategy     *This is the final step for release strategy.Assign release code 01, 02.Click on release prerequisites, select 02 - check box and click on continue.Click on release status button, enter release indicator X, I, S and click continueClick on classification button, enter values of purchasing group for which you want to created release strategy
Than create purchase order for purchasing group, which you assign in classification of release strategy. Enter your values of purchase order and click on check button release strategy executed in your purchase order.
Regards,
Mahesh Wagh

Error in PipelineManager while creating new payment group

Hi Everyone,
I am trying to create a new payment group for purchasing an item with the reward points. i am trying to modify the pipeline flow by overriding commercePipeline.xml. i have added the following lines of code in that xml.
commercepipeline.xml
<pipelinemanager>
<pipelinechain name="validatePaymentGroup">
<pipelinelink name="dispatchOnPGType">
    <transition returnvalue="5000"
      link="validatePointsPG" />
</pipelinelink>
<pipelinelink name="validatePointsPG"
    transaction="TX_MANDATORY">
     <processor jndi=
      "/com/mystore/order/processor/ValidatePointsPaymentGroup" />
</pipelinelink>
</pipelinechain>
<pipelinechain
name="validatePaymentGroupPreConfirmation">
<pipelinelink name="dispatchOnPGTypePreConfirmation">
    <transition returnvalue="5000"
     link="validatePointsPGPreConfirmation" />
</pipelinelink>
<pipelinelink name="validatePointsPGPreConfirmation"
   transaction="TX_MANDATORY">
     <processor jndi=
      "/com/mystore/order/processor/ValidatePointsPaymentGroup" />
</pipelinelink>
</pipelinechain>
</pipelinemanager>
when i am starting the server getting below error:
ERROR [nucleusNamespace.] Unable to start service "/atg/commerce/PipelineManager": atg.nucleus.ServiceException: CONTAINER:atg.service.pipeline.PipelineInitializationException; SOURCE:atg.service.pipeline.TransitionException: A PipelineLink is already mapped to return code [5000] in the pipelink named [dispatchOnPGType].
when i tried to check the commercepipeline in Dynamo Administration it is showing that the pipelinechain is locked
CommercePipelineManager
Pipeline Chains
Chain Id
Num Runners
Enabled
Locked
LockAcquiredTime
LockReleasedTime
LockingThread
validatePaymentGroup
0
false
true
Fri Jan 24 10:55:46 IST 2014
N/A
main
loadOrder
0
true
false
N/A
Fri Jan 24 10:55:44 IST 2014
N/A
updateOrder
0
true
false
N/A
Fri Jan 24 10:55:44 IST 2014
N/A
processOrder
0
true
false
N/A
Fri Jan 24 10:55:45 IST 2014
N/A
validateShippingGroup
0
true
false
N/A
Fri Jan 24 10:55:46 IST 2014
N/A
refreshOrder
0
true
false
N/A
Fri Jan 24 10:55:44 IST 2014
N/A
processOrderWithReprice
0
true
false
N/A
Fri Jan 24 10:55:44 IST 2014
N/A
repriceOrderForInvalidation
0
true
false
N/A
Fri Jan 24 10:55:44 IST 2014
N/A
validateForCheckout
0
true
false
N/A
Fri Jan 24 10:55:45 IST 2014
N/A
Thanks&Regards,
RKishore

U have assigned return code 5000 in both chain to ur new pipeline link.
OOTB 5000 is already assigned to invoice chain.
U need to change return code to new unassigned value.Also return code must be added in expected return codes in ValidatePaymentGroupByType component.
Refer this: Oracle ATG Web Commerce - Extending Order Validation to Support New Payment Methods
Thanks,
Nitin.

How to create new cost groups in inventory org using API or open interface?

Hi,
I would be very kind of you if you can provide me with a solution to my question below.
I have a requirement of copying all the cost groups from one inventory org and creating the same cost groups in another inventory org using programmatically. Is there any API or Open interface that can be used to create the cost groups in the new inventory organization? If not can you suggest any other way of fulfilling this requirement?
I would highly appreciate your help.
Thanks,
Ranajit

hi,
think, it's not possible.
look here:
http://help.sap.com/saphelp_47x200/helpdata/en/4f/71e05a448011d189f00000e81ddfac/frameset.htm
"The field groups and their respective fields are defined in system tables"
kind regards
Andreas

Cannot create new Calendar Group in Mountain Lion

I am using a brand new iMac. I didn't use the migration tool-- instead I exported all of my Calendars from Snow Leopard and Imported them via the File menu in the Calendar application in Mountain Lion.
Under the File menu, there is no "New Calendar Group" option. Command-Shift-N results in an error alert sound and no action.
I do not use iCloud for anything other than email-- everything is turned off in System Preferences.
In Calendar, under the Preferences -> Accounts section, I have NO accounts. It is completely blank.
My previous groups from my export/import are there under the "On My Mac" section of the Calendars panel. I can edit them. But I cannot create any new ones.
Any suggestions? Everything on the internet says I need to deactivate my iCloud account calendars... but I don't use them.

Ah, Barney, you are a lifesaver!
Sorry for the late reply, I was away from my computer this weekend.
All of my calendars had been in groups. I moved one of them outside, and TA DA-- "New Calendar Group" appeared.
Thanks so much for the help. I will have to leave 1 calendar outside of a group so I can add as many as I'd like.

Creating new shipping group?

Similar Messages

Maybe you are looking for