Creating New Source System

Hi All,
I am trying to create a new source system in BW for the new R/3 client which is a copy of PRD.
So now new R/3 client is 200 and also PRD is 200. I did all necessary steps and i found difficulty when i am assigning logical system based on client. I found key is only client, so as PRD system is already mentioned with client 200 i am not able to create new entries and i hope this causing me error.
So by creating RFC destination directly in SM59 and when i tried to create it says PRD Client already available. Though i have specified new client server name.
Kindly advise.
This is quite urgent.
Thank You.
Best regards,
Bhuvana.

hi,
it seems rfc connection between bw and r/3 not established properly, check with transaction sm59 (ask basis help if no authorization), choose r/3 source system rfc and menu test->authorization. check if user name and password, hostname/ip address are correct.
this doc 'bw r/3 connectivity' may useful http://help.sap.com/bp_biv235/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
hope this helps.

Similar Messages

  • Creating new Source system problem

    Hi there,
    System: BW 3.5 client 010, want  to connect to R/3 4.6c Sandbox client 0101
    we just refreshed our BW 3.5  sandbox with current production data. Now we want to create the source system via RSA1 to point to R/3 Sandbox. When we try to create this we get this new error. I am not sure why it is
    Error:
    Logical system BIX010 exists already
    Message no. R3222
    Diagnosis
    The SAP Business Information Warehouse BIX010 is already connected to the source system. A multiple connection is not possible.
    For some reason, it is reading as BIX010(talking to the system itself) - BW Sandbox systems, it should be doing the source system creation for SBX010 not BIX010 (talking to the system itself)
    I tried to create the system manually and automatically, still no luck.
    I cannot see SBX010 source system in teh RSA1, I am afraid it might be in the database table and not showing up in the transaction RSA1, does anyone know the table that it has this information, so I can se16 and look at the entries?
    Does anyone knows where to look for?
    Thanks in Advance
    Kumar

    Goto SM50 and check for ABAP connections. Look for SBX010. If you don'T find it here you have to create it. Check also BIX010 if it'S connected to the right system.
    Regards,
    Juergen

  • Creating New Source System Connection

    [First post, so go easy on me!]
    I have created a source system connection in BW QA, to an additional R3 QA client, but I am unable to assign any datasources to the new this new connection. [I know that I should have created the connection in DEV and transported through, but I need this connection for a small test, that won't be used again.]
    To get round this, do I need to have my BW & R3 clients 'opened' again, then transfer the 'Application Component Hierarchy' via RSA9, then 'Replicate Datasources' in BW. If not, does anyone have any suggestions?
    Thanks in advance.
    Scott

    Scott,
    You will have to transfer the BC datasources that you want to use from R/3 to BW.
    in BW, right-click your source system in the modeling tab and select replicate datasources, this will take you through to your R/3 system. Select the datasources you want to use and transfer them. Then go back to your BW system and right-click the source system and select "Transfer datasources". This should make them available.
    If when you have got through to R/3 to transfer the datasources you are told that cross-client customising is not available then I think that you will have to get the client opened up.
    Cheers,
    Stuart

  • Change Default Background User In BW When Creating New Source System

    Hi all,
    I would like to create a new Source System in RSA1.
    In Source Systems > SAP > Create > Connection of source system to BW
    the Default background user in BW is u201CALEREMOTEu201D.
    How do I change this to another user?

    Just want to say thank you. I could fix a problem with your information.
    I was searching to change the background user from ALEREMOTE to BWREMOTE as all our process chains were running on ALEREMOTE.

  • Creating new source system in bw

    hi all
    i have got one problem with creating source system to bw from r/3,i have created RFC connection to bw and r/3
    and i was trying to create source system manually and automated but it is not activating i'm getting fallowing error
    ...the fallowing errors occurred in the source systemrsar--mess no 374
    ....result of destination check timeout rsarmess no 375
    can any one help me on this please

    Hi!
    Check out the connection with defined RFC.if it is ok,then check out the privliges for the user using which yuor trying to create the source system.
    Best Regards
    Sunil.

  • Steps for creating new source system

    Hi guys
    We are on BI 7 and ECC 6 now...We are planning to get the data from other source systems (R/3 4.6)which are existed in different place.
    Now my question is what are the steps to get the data from this new Source system and whats BI developer role for this...
    Example: Inorder to establish the connection between BI and R/3 we need an RFC connection (Is this done by BASIS / BI )? If its BI , then what do I need to ask for ?
    afterthat what are all the questions or points that I need to raise to the folks in the meeting...
    Please advice
    regards

    Hi
    refer to this link below
    http://help.sap.com/saphelp_nw04s/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
    Exactly this will be taken up by BASIS team so that at any time if we have any issues with RFCs like RFC connection failure we will not get any data to our targets.
    Then we have to raise ticket to basis stating this failure

  • About creating a new source system on BW pointing to an Oracle database

    hi friends
      i m facing problems when i 
    creating a new source system on BW in AIX pointing to an Oracle database, our bw oracle use 10idatabase ,and we want to connet to 9idatabase(Windows) to get data for BW
    (1.)     in /oracle/P01/102_64/network/admin  tnsnames.ora I hava  add
    SJPT =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = 68.16.211.177)(PORT = 1521))
        (CONNECT_DATA =
          (SERVICE_NAME = SJPT)
    (2) and in etc/hosts I hava  add
    68.16.211.177 SJPT
    (3) in p01adm> tnsping SJPT it is OK
    (4)but when i
    in  BW RSA1 DATA SOURCE 
    create db connect:
    DBMS: ORA
    USER NAME: SAP
    DB PASSWORD: SAP
    [email protected]
    i t give me the error message :
    ORA-12154: TNS:could not resolve  the connect identifier
    please help me

    HI,my trans.log file is
    4 ETW000 R3trans version 6.13 (release 700 - 20.02.06 - 16:15:00).
    4 ETW000 unicode enabled version
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 13.11.2007 - 10:16:48
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: R3trans -d
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [dev trc     ,00000]  Tue Nov 13 10:16:48 2007                              81  0.000081
    4 ETW000  [dev trc     ,00000]  db_con_init called                                    29  0.000110
    4 ETW000  [dev trc     ,00000]  create_con (con_name=R/3)                             50  0.000160
    4 ETW000  [dev trc     ,00000]  Loading DB library '/usr/sap/P01/SYS/exe/run/dboraslib.o' ...
    4 ETW000                                                                              43  0.000203
    4 ETW000  [dev trc     ,00000]  load shared library (/usr/sap/P01/SYS/exe/run/dboraslib.o), hdl 0
    4 ETW000                                                                           13346  0.013549
    4 ETW000  [dev trc     ,00000]  Library '/usr/sap/P01/SYS/exe/run/dboraslib.o' loaded
    4 ETW000                                                                              32  0.013581
    4 ETW000  [dev trc     ,00000]  function DbSlExpFuns loaded from library /usr/sap/P01/SYS/exe/run/dboraslib.o
    4 ETW000                                                                              35  0.013616
    4 ETW000  [dev trc     ,00000]  Version of '/usr/sap/P01/SYS/exe/run/dboraslib.o' is "700.08", patchlevel (0.46)
    4 ETW000                                                                              53  0.013669
    4 ETW000  [dev trc     ,00000]  function dsql_db_init loaded from library /usr/sap/P01/SYS/exe/run/dboraslib.o
    4 ETW000                                                                              34  0.013703
    4 ETW000  [dev trc     ,00000]  function dbdd_exp_funs loaded from library /usr/sap/P01/SYS/exe/run/dboraslib.o
    4 ETW000                                                                              53  0.013756
    4 ETW000  [dev trc     ,00000]  New connection 0 created                              23  0.013779
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              39  0.013818
    4 ETW000  [dev trc     ,00000]  db_con_connect (con_name=R/3)                         45  0.013863
    4 ETW000  [dev trc     ,00000]  find_con_by_name found the following connection for reuse:
    4 ETW000                                                                              32  0.013895
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              37  0.013932
    4 ETW000  [dev trc     ,00000]  Got LIBPATH=/usr/lib:/lib:/usr/sap/P01/SYS/exe/run:/oracle/P01/102_64/lib from environment
    4 ETW000                                                                             325  0.014257
    4 ETW000  [dev trc     ,00000]  -->oci_initialize (con_hdl=0)                         47  0.014304
    4 ETW000  [dev trc     ,00000]  Client NLS settings: AMERICAN_AMERICA.UTF8          3234  0.017538
    4 ETW000  [dev trc     ,00000]  Logon as OPS$-user to get SAPSR3's password           28  0.017566
    4 ETW000  [dev trc     ,00000]  Connecting as /@P01 on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
    4 ETW000                                                                              34  0.017600
    4 ETW000  [dev trc     ,00000]  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    4 ETW000                                                                              35  0.017635
    4 ETW000  [dev trc     ,00000]    0 UTF8                                                      1 0x110f8b9c0 0x110fa3e38 0x110fa36e8
    4 ETW000                                                                              36  0.017671
    4 ETW000  [dev trc     ,00000]  Allocating service context handle for con_hdl=0       37  0.017708
    4 ETW000  [dev trc     ,00000]  Allocating server context handle                      24  0.017732
    4 ETW000  [dev trc     ,00000]  Attaching to DB Server P01 (con_hdl=0,svchp=0x110f94398,svrhp=0x110fa6158)
    4 ETW000                                                                              72  0.017804
    4 ETW000  [dev trc     ,00000]  Assigning server context 0x110fa6158 to service context 0x110f94398
    4 ETW000                                                                           36191  0.053995
    4 ETW000  [dev trc     ,00000]  Allocating user session handle                        73  0.054068
    4 ETW000  [dev trc     ,00000]  Starting user session (con_hdl=0,svchp=0x110f94398,srvhp=0x110fa6158,usrhp=0x110f937a0)
    4 ETW000                                                                              43  0.054111
    4 ETW000  [dev trc     ,00000]  Assigning user session 0x110f937a0 to service context 0x110f94398
    4 ETW000                                                                           10613  0.064724
    4 ETW000  [dev trc     ,00000]  Now '/@P01' is connected (con_hdl 0, nls_hdl 0).
    4 ETW000                                                                             964  0.065688
    4 ETW000  [dbsloci.    ,00000]  *** ERROR => ORA-942 when accessing table SAPUSER
    4 ETW000                                                                            1183  0.066871
    4 ETW000  [dev trc     ,00000]  Disconnecting from connection 0 ...                   73  0.066944
    4 ETW000  [dev trc     ,00000]  Rolling back transaction ...                          28  0.066972
    4 ETW000  [dev trc     ,00000]  Closing user session (con_hdl=0,svchp=0x110f94398,usrhp=0x110f937a0)
    4 ETW000                                                                             146  0.067118
    4 ETW000  [dev trc     ,00000]  Now I'm disconnected from ORACLE                     409  0.067527
    4 ETW000  [dev trc     ,00000]  Try to connect with default password                  23  0.067550
    4 ETW000  [dev trc     ,00000]  Connecting as SAPSR3/<pwd>@P01 on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
    4 ETW000                                                                              34  0.067584
    4 ETW000  [dev trc     ,00000]  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    4 ETW000                                                                              36  0.067620
    4 ETW000  [dev trc     ,00000]    0 UTF8                                                      1 0x110f8b9c0 0x110fa3e38 0x110fa36e8
    4 ETW000                                                                              36  0.067656
    4 ETW000  [dev trc     ,00000]  Assigning username to user session 0x110f937a0        22  0.067678
    4 ETW000  [dev trc     ,00000]  Assigning password to user session 0x110f937a0        41  0.067719
    4 ETW000  [dev trc     ,00000]  Starting user session (con_hdl=0,svchp=0x110f94398,srvhp=0x110fa6158,usrhp=0x110f937a0)
    4 ETW000                                                                              37  0.067756
    4 ETW000  [dboci.c     ,00000]  *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
    4 ETW000                                                                           33690  0.101446
    4 ETW000  [dbsloci.    ,00000]  *** ERROR => CONNECT failed with sql error '1017'
    4 ETW000                                                                              36  0.101482
    4 ETW000  [dblink      ,00431]  ***LOG BY2=>sql error 1017   performing CON [dblink#3 @ 431]
    4 ETW000                                                                             122  0.101604
    4 ETW000  [dblink      ,00431]  ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#3 @ 431]
    4 ETW000                                                                              34  0.101638
    2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'P01'"

  • Error when creating SAP source-system in RSA1

    hi,
    we have a new bi-installation. the bi-system is running in the SAME system as our erp 2005-system is running.
    the bi-client is 700, our source-system (FI/CO) client is 101. I want to create a source-system in RSA1. at the end i get the following error message:
    <b>Name D01MAND700 of client 700 is not the same as the name D01MAND101 of the Warehouse
    Message no. R3225
    Diagnosis
    In order to guarantee error-free communication between the source system and the SAP Business Information Warehouse, the logical system names must be known to both.
    The system has established that the selected source system name D01MAND101 in the SAP Business Information Warehouse is not the same as the logical system name D01MAND700.
    System Response
    Processing has been terminated and all changes undone.
    Procedure
    Create the source system under the name D01MAND700 in the SAP Business Information Warehouse or change the logical system name for client 700 to D01MAND101 in the ALE customizing screen of the source system.
    Note that the logical system name for client 700 may already be being used for other ALE scenarios. If this is the case you are not able to change the name.</b>
    i don't understand this error ? is it because the BI-system and the erp-system is the SAME system ?
    reg, Martin

    mr. kapadia,
    there is one entry in table rsbasidoc, and it looks like that:
    SLOGSYS     D01MAND700                            
    RLOGSYS     D01MAND700                                                                               
    OBJSTAT     ACT                                   
    BIDOCTYP    ZSCA017                               
    TSIDOC3X    0                                     
    TSPREFIX    CA                                    
    SRCTYPE     M                                     
    SAPREL      700                                   
    TSTPNM      D78358                                
    TIMESTMP    20.070.622.093.042                    
    SBWBCRL     700                                   
    RBWBCRL     700                                   
    looks strange, right ? what should i do ? delete this entry ? how can i do this, it is a customizing table, i cant delete it via SE16 ?!?
    reg, Martin

  • Create sap-source system in netweaver

    Hello,
    i want to create a R/3-(4.6c)-source system in my Netweaver-BI (2004s), but I have problems with the connection.
    For the connection i created in the Netweaver a new destination and a user "User_A" with the profile "S_BI-WX_RFC / Business Information Warehouse: RFC-User in Warehouse.
    In the R/3 I created a user "User_B" with the profile "S_BI-WX_RFC / Business Information Warehouse, RFC-User Extraction"
    After creating the Source-System in the AWB with the destination and the 2 Users, I have to Log-On as an administrator in the R/3. After Log-In comes the message "User already exists in source system. Only continue if Profile and Password Are Correct."
    Then I have to create the Destination in the R/3. There I fill in the "Logon"-Part my "User_A", but then I get the alert:
    RFC user logon failed. Check the connection. Message no. R3 077.
    Diagnosis: You tried to logon using the RFC user. This action failed.
    System response: Name or Password not correct
    But I'm sure that I made no mistake with the password.
    Has anyone an idea what I did wrong?
    Thanks
    Malte

    Hi,
    Generally we maintain the Destinations and userids in both systems first, and then create the source sytem in AWB of BIW.
    Have you created the Logical system names in both the systems ?
    Have assigned the client to the logical system name to client in both systems?
    Have you mentioned correct client in the destinations?
    With rgds,
    Anil Kumar Sharma .P

  • Transport InfoSources to New Source System

    Hi.
    When implementing BW in our QA environment, all InfoSources, and their related InfoPackages, Transfer Rules, Update Rules, etc.) were created using a temporary R3 QAS source system mapping (ex.TMP).  We are now removing this temporary client and  I now need to change my InfoSources (along with customized Start Routines, InfoPackages, etc.) to point to a new QAS source system (ex. PRM). 
    Note that this new source system is already identified as a source system for BW and all DataSources created on TMP have been transported to PRM.  Subsequently, all DataSources have been replicated from PRM to BW. 
    However, I'm having trouble on the BW end.  I can't easily
    transfer the InfoSources, etc. to the new source system.  I've asked some BW / Basis folks and they suggest transporting the InfoPackages out-of and then back-into the BW QA client.  Is this possible?  Is there a better way to push my InfoSources, InfoPackages, etc. from the old source client (TMP) to the new one (PRM)?  Thanks!

    Dear Dave
    Please do not attempt to change the logical system name your self, as I feel that you have not tried it before.
    This is some thing that your basis people have to do. Depending on the size of database this change can take from 2-24 hours (not exact times, but just some thing to show the magnitude of the task).
    Good luck
    /FZA
    Message was edited by: Fariborz Zangoui

  • BW: Connect to new source system via special transport

    Hello everyone!
    I have a BW system connected to an R/3 source system. I have made a copy of the source system. Now I want all my models to be connected to both source systems. I heard that this can be achieved via special transport (i.e. place all source system dependant objects into a special transport request to be imported back into my BW system, but with the new source system assignment). Does anyone have any documentation on how to do this?
    Best Regards and Merry Xmas!
    Luís Andrade.

    Hi Luis,
    There are two parts,
    1) If you want to transport all your objects from current R/3 system to newly created r/3 system then you can create a TR and use it in SCC4 transaction during client copy. In the same fashion you can use RSA1---> transport connection and use the TR for system copy. After that once you release this TR all the objects will move from one system to another.
    2) But if you have already moved all the objects in source system but now you want them to replicate in BI then go to SAP BI system select your source system and then from the context menu choose replicate datsources option, it will fetch everything from respective source system in BI.
    Regards,
    Durgesh.

  • New Source System Client for BW

    Hi All,
    Currently we have R/3 QAS Clint 102 connected to BW QAS. We want to get rid of this Client 102 and connect a new QAS Client 100 (same server but different Client) to BW QAS. I created a new Source System (QAS100) in BW QAS and did a restore. 
    My question: How do I get all the Source system dependent Objects like InfoSurces, InfoPackages etc for the new Client 100 in BW QAS? Please help me and I promse to generously reward points. 
    Thanks, very much in advance.
    Srini

    Hi A.H.P,
    I am pretty sure this will resolve the issue. I will come back again and reward 10 points once we apply a working solution.
    Thank you for a quick reply.
    Srini

  • Add new source system to BI

    Hello,
    Our requirement is to load data from a different R3 client to which we dont have a connection yet.
    The idea is to create a new connection but keep the existing one.
    Is there any automated tool to do this? We would like to avoid the manual creation of all infosources and transformations from the new source system, but to copy them from the existing one.
    We found that there is a tool for replacing the current source system with another one (BDLS), but we just want to create this new one in paralel with the current source.
    Thanks!!
    Pablo

    Hi,
    what you can do is, create a transport request containing all source system related things like the infosource/datasource assignment, transfer rules... and import that transport back into your dev system. Before the import you should maintain the settings for source system after transport accordingly.
    Siggi

  • How to transfer all the transfer structure to new source system ?

    Hello
    I have created a new source system on my BW system with new RFC connection .
    I want to replace all my old transfer structure with old source system to this new system .
    can u plz let me know how can i do this ?
    Regards,

    can u plz many help in this ?

  • New source system - same BI system - time estimate

    Hello,
    The project management of my current project has decided to create a new ECC QA system as copy from existing ECC QA with no data. The BI QA system will remain as it is.
    How much work will this create for us in order to re-map the transfer structures in BI to the new system. Will I be able to use the same info sources (off course with new source system)? Any more work needs to be done?
    We have about 8 info cubes including stock, sales, purchasing, PCA, loading data via 15 info sources + all masterdata..
    Is this a quick and easy fix or a time consuming task?
    Regards,
    F C

    Hello,
    Yes, I agree. Just needed a second opinion! Thanks! This is a fresh installation so the amounts of data are quite small..
    It should be possible to use the same info sources with some modification on source system and that's it.
    Agree?
    Regards,
    F C

Maybe you are looking for

  • Vendor Master Replication Error  from ECC to SUS : Error in ALE Service

    Dear Experts, We are implementing MM SUS (SRM 5.0). As a part of this we need to replicate vendors from ECC to SUS system via XI. We have created a Reduced Message Type Z_CREMAS_SUSMM and had set up the partner profile in WE20 with SUS logical system

  • Updating a DB table with only non-empty values of a work area

    Hi everybody, Is that possible in ABAP to update a table in the database with a work area, but only with non-empty values of this work area? Example: data: ls_custom type ZCUSTOMERS_0. ls_custom-CUSTOMER = '20'. ls_custom-LASTNAME = 'MyName'. ls_cust

  • NVIDIA GT 740M Code 45

    Hi. My graphics card is not being detected, device manager lists NVIDIA GT 740M as a hidden device (have to select show hidden devices to view it), upon going into the device properties it states this: 'Currently, this hardware device is not connecte

  • Iphone not showing in windows explorer?

    This started happening recently (like 2 or 3 months ago maybe?) where my iphone would not show in the windows explorer. I tried deleting all the photos not taken by my iphone, restoring it, deleting all my photos, deleting the dcim folder via diskaid

  • Application call to ODBC SQLSetEnvAttr function throw HY011 exception

    Hi All,       I try to use odbc driver manager in my .Net Application.first My .Net runtime is 3.5, odbc function calls(unmanaged functions are  imported to .Net application by dllimport attribute)can work well.but when .Net runtime is upgraded to 4.