Creating new tracks when recording in Cycle (loop) mode

I'm having an issue when recording in cycle mode.. I'm able to record (in seperate tracks) in cycle mode. however I can only play the first take (first track) I recorded, however all the subsequent tracks that were recorded do not play. Even when I try 'soloing' them they still don't play. You can see in the arrange window that audio data was recorded on those tracks however they have a "faded" effect to them. They're also not muted. Am I missing a setting?

The issue you describe when recording in cycle mode was a huge frustration for me until I discovered that I was not aware of a simple principle that made all of the difference... I am wondering if the following explanation may be part of the problem that you are experiencing.
The principle is that muting a region, muting a track, and muting an audio channel are three distinct and separate functions. Until I got my head around that principle, I continued experiencing the same frustration that you are having with recording in cycle mode.
Recording in cycle mode results in muting the regions below the last take at the top. When trying to unmute the "tracks" below the top region to listen to the other takes, hitting the mute button results in ALL of the "tracks" either being muted or unmuted, yet the separate regions below are still muted!
The key is to unmute the REGION that you want to listen to (and not the track or the channel). The way to do this is to hit the escape key to bring up a local tool box menu wherever your cursor is... then click on the mute tool which changes the cursor into a mute tool, then click on whatever regions you want to unmute...
Hopefully the above will help.
Power Mac G5 Mac OS X (10.4.8)

Similar Messages

When creating new track in stereo... track opens in mono in arrange window

Since upgrading to 8.0.2...weird things are happening to previously saved projects. Stereo tracks are opening up mono and affecting following track. When creating new tracks in stereo.... tracks open mono. I don't know if this is due to 8.0.2 but all these freaky things have happening since. Also, when previewing Apple Loops, I can only hear it on one side, but Loops sounds fine once dragged to arrange window. Is this common or is my computer haunted ? Should I call Ghost Busters ? HELP !!! lol

Hi there,
I'm having the same problem as well: creating new tracks results in a mono software instrument, not the usual stereo software instrument. BUT... "Universal Track Mode" is already checked in my Audio prefs. I unchecked & rechecked it, but to no avail... I'm still only getting mono software instruments.
Any other ideas? No changes have been made to my system, and I'm running the latest version of Logic Pro.
Kirby

Error message while creating new Track.

Hi,
I was unable to create new track in our NWDI systems, getting the following message. I checked authorizations and it looks fine to me.
CBS (URL http://<HOST>:<PORT>/tc.CBS.Appl/archiveapi2/) authorization exception: User not authorized to log into build server. ( Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL was:"http://<HOST>:<PORT>/CBSWebService/CBSHttpSOAP?style=rpc" )
Please help me to resolve this issue.
Thanks & Regards
Srinivas

Please see the fine documentation:
http://help.sap.com/saphelp_nw70/helpdata/EN/da/f812d366aa44ad83a30418b34dae1c/frameset.htm

Creating new DMS info record directly from purchase order transactions

Hello Everybody,
does anyone knows of a way to make it possible for users to Create New DMS info record directly from the purchase order transactions ?
e.g:
in ME22N there is a button of "Documents" for an item level in the order, but that button only allows to link an existing info record.
Link To a screenshot:
http://img263.imageshack.us/i/me22n1.jpg/
Regards,
Yossi Fridman.

hi
This query has already been addressed in the following Forum by Christoph Hopf..
pls chk link below.
Create DIR through P.O and Sales order screen
Thanks
john
Edited by: johnpp on Feb 15, 2011 11:54 AM
Edited by: johnpp on Feb 15, 2011 11:57 AM

Upgrade Runtime Systems create new Tracks?

Hi all,
we are in the situation, that our Runtime Systems will upgrade from NW04 to NW04s. Cause we have ongoing development, we can not upgrade existing tracks itself, while the release change will last several weeks (D,Q and P). The idea was, to create new Tracks for new release and reimport SCs from assembly step of old release.
So we defined Products and Software Components in SLD with new Version Number, with the dependencies for the new versions.
Created new Tracks in CMS, Imported all SCA and made required changes. So far so good.
Unfortunatly in Assembly Step of new Track i`m not able anymore to Change Patch Level and Support Package Stack, only the "keep current" option is available.
Thanks for any help
Regards Oliver

Hello NWDI Users,
i followed thee guide here: https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/5834. [original link is broken] [original link is broken] [original link is broken]
The Problem still exists. In Track of new release (NW7.0) i`m not able to increase the
Support Package Number nor Patch Level.
So software versioning is diabled in 7.0??
Regards Oliver

"Create new versions when making adjustments" - Lion, Aperture 3.1.3

I recently upgraded to Lion, and then shortly thereafter to Aperture 3.1.3.
While I don't seem to share everybody else's issues with Lion nor with Aperture, I do have one of my own.
In Preferences -> Advanced, I have a box titled "Create new versiont when making adjustment." It is checked.
My expectation, (and the way things have always worked under Snow Leopard) is that if I select a master image and begin to make adjustments to it from _any_ feature int he adjustments pallette, that I new version will be created, stacked next to the original, and that the changes I am making will be made to the new version. This is _not_ what is happening.
Instead, the changes are applied directly to the master image. This is annoying, and will probably be fixed in an update...    I thought the work around would be to manually create the version for the time being, until Apple sorts this out. That didn't work either.
If I manually create a version, and then proceed to make adjustments to the version, Aperture dows what I would have expected in the first place. It creates a new version and applies the changes to that.
For example, I right click on a master image and select "New Version form Master" A new version, titled "... - Version 2" is created. When I begin to modify Version 2, a new version is created titled "... - Version 3" and my changes are applied to this version... leaving me with the master and Version 2 which are now duplicates of each other.
Even more interesting is this:
Images that were imported into Aperture prior to the Lion upgrade, and the 3.1.3 patch behave as expected, in that a new version is created when adjustments are applied to a master image.
Images that were imported into Aperture _after_ the upgrade to Lion and the 3.1.3 patch act as describd above, in that no new version is created when adjustments are applied to a master image.
So... Here are the questions:
1. Is anybody else experiencing this?
2. Does anybody know how to restore the correct behavior?

Alright,   I have solved the problem.
Some time ago, I thought it might be neat to import pictures with the Auto Exposure adjustment in place. What I didn't realize was that if the master image is in the library with adjustments on it, it downs't create a new version when you add additional adjustments.
As soon as I disabled that, and imported some new imges the probelm went away.
Also... I went back to the six or seven project that I had imported while use Auto Exposure and removed that adjustment from those images...
All is resolved.

System should not creates new version when value of PO increased..

Hi Experts,
Need your help to solve this problem. When i increase value of PO it should retrigger Release strategy but it creates version first, then i have to tick completion indicator and check then only release strategy retriggers..
It should not create new version when change po
Please check below screenshot
Please help

Hi
Please reveiw the following points in note
   - 493900 FAQ: Release Strategy
      4. Why is the release strategy not determined?
     "If you use version management, the determination of the release
      strategy starts when the version is completed.
      You complete a version by setting the "version completed"
      indicator in the version tab."
   - 662993 Resetting an already occurred release
     You edit a purchasing document with release strategy.
     You change the quantity or the price. In spite of that, the
     already set release is not reset.
The release strategy works the same with or without version management
active - the only difference in case - version management is active -
is that if release is to be reset, it will be reset only on version
I hope this helsp to clarify this issue
Kind regards,
Lorraine

Preference to "Create New Versions when making adjustments"

Isnt the option in Preferences "create new version when making adjustments" seem irrelevant when Ap doesnt touch the original (master) anyway? How is this option intended to be used? Most of the imags for me would be slight tweeks so I wouldnt necessarily want every one of those showing as a 'full new version'.

yeh, that would seem logical wouldn't it - to create a new version for each session... but that's not what happens.
i mostly use the HUD and don't close between adjustments but i do sometimes use the side panel which i also don't hide/close between adjustments. i can't remember whether making adjustments via the side panel creates new versions for every adjustment, certainly this behaviour happens when i use the HUD and i'm fairly sure i would have tried the side panel to avoid this annoying behaviour but i can't say for sure and will have to test the side panel behaviour next week if i get time.
even with the preference for 'create new versions' turned off, there seem to be certain images that always create a new version when i make an adjustment - whether using the HUD or side panel. I haven't figured out an exact pattern to this but it seems to be something to do with those files that have been 'sent to external editor'. subsequent adjustments within aperture always create a new version - haven't a clue why...
just as an aside, sometimes when i make adjustments (particularly sharpening or noise reduction) i get single pixel wide horizontal lines of noise appearing across my images, which are there when i print or export too, not just screen artifacts due to a badly processed preview...hmmm...anyone else noticed this or has found a post about ways to avoid this?
all that said, aperture is a godsend for my workflow
MacBook 2.0 White Mac OS X (10.4.8)

Create new versions when making adjustments?

Hi,
What does anyone suggest this setting should be set to? It's on the Advanced Tab in Preferences.
I think it was un checked when I installed the Trial Version.
The help file stated the following:-
+Create new versions when making adjustments” checkbox: Select this checkbox to have Aperture automatically create a new version when you adjust a selected image. The adjustment is applied to the original version and the new one is left untouched.+
So when I edit an image the the software makes a copy and the original is altered? What happens if it's left un checked?
Any help on the whole editing thing would be gratefully received.

This is just a way to automatically create a new version when you make an adjustment. The new version is stacked with an unaltered version, allowing you to quickly see them side by side. What you have to remember is that the *original file is never altered*. This is all virtual. What is called original in this case is in fact an original version, not the actual file. The actual file is called the Master. Very important to understand the distinction.
I personally leave this off. I never use RAW files without adjustments so there's no point in keeping an unaltered version around, plus it tends to quickly multiply versions and just creates clutter. If I want to see the original file I just hit M (this is the default command key for Show Master). Hit M again and I'm back to my version. If I've created a version and want to do a new different looking one starting from scratch, I can select New Version From Master: presto a new "original"!
If I've worked on a picture and want to create a BW version, chances are I want to keep the work I've already done as a starting point. In that case I select Duplicate Version and do my BW on the new version. Again, I'm never actually duplicating files and I'm never actually altering pixels, original or otherwise. This is all a set of xml instructions that Aperture applies when it displays the files.
Helping?
Message was edited by: Jade Leary

Re-recording to a new track when original track has right channel off

I have a track and when the volume is off on the right channel, the guitar (right channel) is silent.
How do I bounce this track, with the guitar silent, to a new track so the guitar is no longer present in the recording?
I'm sure it's a routing issue from the original track to the new track, but can't seem to implement it.
Thank you

Try to do the following:
Make a new logic song.
Turn OFF universal trackmode, in your audio preferences.
Import your stereo audio track, and create two new mono audio channels.
drag the stereo audio file to the two mono audio files.
DONE.
if you then want to make a mono file from the channel without the guitar, export that file by itself, bounce it, or however you like to export audio regions.
Cheers

Creating New Track

Newbie question - been trying to create more audio instrument tracks, but everything I do to try to separate them from the original (Instrument 4) track changes that original track as well. Both the manual and Sitter's book say to just hold the new track's name and from the pop-up menu, pick a new instrument from the list. The only problem with that is that the pop-up menu ONLY SHOWS ME THE INSTRUMENTS CURRENTLY IN USE BY THE OTHER FOUR TRACKS. It doesn't show me all 128 instruments and let me pick. When I try to change the intrument of the new track using the Channel selection in the Object Paramater box (which DOES list all 128 instruments) it also changes the instrument in the original channel. So both the new and the old channel remain totally linked and anything I do in the new channe (volume, pan, etc.) is mirrored in the old channel.
How do I de-link a new channel from an old one? (Seems like a dumb default to assume the new channel takes on the instrument as the predecessor instead of just picking the next). And yes, I've also tried creating a new one by double-clicking the first empty slot at the bottom of the Arrange window and by selecting 'Track' - 'Create with Next Instrument'. No difference - still creates using the last instrument and only shows me the instruments in use when I try to pick a new one. Help?

this is the second post today on this question.
use create track with next instrument.
or create multiple if creating more than one new track.
also ... search previous question on the subject.
also ... combine manual with sitter's stuff. It's great. I love those videos. but you still gotta read the manual.
Best of luck
Dee

Creating new tracks (any kind)

I´m getting a bit frustrated here now. I can not find a simple quick way of creating a new track (object) in the arrane window. I know Logic is a very customizable DAW, but I would like an easier way. Like control clicking in the tracklist and then choose track/object type. I´m still a novice here, and I may have missed something important and obvious, but if you have to go into the environment everytime, or create templates, it´s too much. When Steinberg and MOTU have done it, why not Logic? It should be right up there! Maybe it is, and I´ve missed it. Can´t find it in the manual, though. Any of you seasoned users got a tip? I´ll be happy to eat some humble pie if I can stand corrected here

Hi
That was quick :o)
Ok:
If I have an instrument track with Stylus RMX on it, then try to use the mentioned procedure, what happens, is I get a copy of the RMX track. If I then remove RMX on the copy, it also disapears on the "original". And I didn´t want an instrument but an audio track. Where do I go wrong? I can´t find it in the manual.
I work with a lot of different projects and with different DAWs, Nuendo, Samplitude, DP5, Pyramix, Live, Acid, and they all have their strengths and weaknesses.

Creating new track - software catalog new product not showing up - Help!!!

Hi,
Creating a new track for custom development.
A new product has been added in the software catalog in SLD.
SLD and NWDI (netweaver 04) are on the same system.
The new product is not showing up when trying to select in the new track, Software Components for Development section. Why??
Does the server need to be restarted after adding a new product? This is difficult for us as SLD has production systems tied to it!!!
Thanks in advance
Regards, Neeta

Thanks - This did the trick. I have awarded points!!!!
Regards, Neeta

I can only hear my record enabled track when recording,not when just playing

This has to be a simple one - normally I can hear my record enabled track when playing back or recording but suddenly i can only hear it when I am actually recording. I must have accidentally selected an option i am unaware of - can someone please help!
Thanks

In case anyone is also stuck I went to Options->Audio where there is an Auto Input Monitoring option. I turned it off and it fixed my issue.

Recording Audio...Can't hear over other tracks when recording!!

Hello again and thanks for the help. So why, when I'm recording audio, a guitar for example, is the signal so low I can barely hear it above the other tracks. Then, all of a sudden, when I play back what I recorded it almost knocks me back off my seat it's so loud. How do I turn up a track i'm recording enabled track so that I can hear better what's being recorded? This is a problem I've run into myself and when I'm recording others, like a vocalist. I need some way to turn up a "cue" send level even if it's coming out the same monitors that the rest of the mix/track/song is.
Any tips would be much appreciated. THANKS AGAIN

I understand that this is directly related to my monitoring capability but am assuming there's some way, INSIDE of Logic, that this level adjustment can be made. Why, when recording, can you barely hear a signal and then when a track is automatically set to 0.0 dB it is much much louder. Why the difference.
I, too, have a MOTU 828mkII. Admittedly not as good with it as I should be, I need to work more with my monitor mix but this situation seems to often be used to dodge my real question ^ up above. Any tips or tricks are much appreciated so that's cool, but see if you can at least shed some light on what I'm confused about up there^^^^^^
I DO NOT want to use headphones to record this guitar. Feels more natural for me to record directly into Input 1 of the 828 and hear all the tracks coming out of my monitor while I'm recording the guitar over it. Again, why so quiet when recording and why, then, so loud when no level adjustments have been made when playing back the audio. Again, no level adjustments made on anything and all of a sudden the most recently recording track is louder relative to all others
thanks

Creating new tracks when recording in Cycle (loop) mode

Similar Messages

Maybe you are looking for