Creating non pegging relevant snp orders by using snp optimizer

Hi all,
We want to create snp planned orders with non pegging relevant by using snp optimizer, how can we do this?
Regards,
Burak

Hi Burak,
In IMG, use the following menu path
SAP SCM Impl Guide --- APO --- Supply Chain planning --- PPDS --- Global settings --- Maintain Global parameters and values --- Under Planning Tab --- Activate fixed pegging.
This is universal setting for the entire client.
Hope this helps.
Please confirm
Regards
R. Senthil Mareeswaran.

Similar Messages

  • Create non-valuated material using MMU1 and MM01

    Hi MM expertise,
    To create non-valuated material, we need to use standard SAP transaction MMU1.
    Earlier on, I created the non-valuated material using MM01. Want to know any impact and different between MM01 and MMU1.
    Regards,
    sim

    mm01 is for creating the material code for all types of materials.
    mmu1 is only for non valuated material.
    if u want u can check in mmu1 u dont finf the material type selction option, where as u find it in mm01.

  • PO purchase order non MRP relevant

    Hi,
    Is it possible to create a document type which is non MRP relevant? For instance, if we place an article XXXXXX in a NB purchase order, the article XXXXXX is MRP relevant and will be listed in MD04.
    Is it now possible to create the article XXXXXX in for instance a ZUB purchase order and that it won't be listed in MD04?
    We want to do this because we create a large order on which we place call offs. Now I know we could work with scheduling agreements, but it is in one way or another possible to create a purchasing document in which items are non MRP relevant?

    Hi,
    The relevancy doesn't depend on the document type. If you create a PO with account assignment, the PO won't appear on MRP list (generally). If you receive goods against this PO your stock won't change (increanse).
    You should describe your business requirement because I don't think that scheduling agreement and PO that doesn't appear on MRP list are sensible alternatives for the same solution.
    Regards,
    Csaba

  • Prevent Hourly Employees from Ordering Non-stocked Materials and Creating Purchase Reqs in Work Order

    Our SAP plant maintenance system is configured to create a purchase req when a non-stocked material is ordered. We would like to prevent hourly employees from creating a purchase req or ordering non-stocked materials. Only supervisors should be able to order non-stocked materials and create a purchase req. Is there a way to do this via config or system enhancement?

    Hello Rick,
    Clearly there will be 2 ways if not more. One is the Authorization object route and another is Enhancement route. I'm not going to touch the former one. So let's expect answers from other members for that. For the later one, we need to know the answer for the question below:
    'Can we distinguish the hourly employees from regular employees by the user-Id or some other means? If yes, how ?'
    Once we know this, we need to use some user-exit or enhancement spot of the program SAPLCOIH to capture the event of 'N' in the ItemCategory field of Components tab by such UserIds and trigger an error message.  (Suitable user-exit is not striking my mind, so this might go the implicit enhancement way of Order program SAPLCOIH ).
    KJogeswaraRao

  • Return order (RE) changed to non-billing relevance

    Hi experts,
       I would like to change order type RE to non-billing relevance. When I make such changes, and go to VA01 to create RE order, I get "Missing Profitability Segment" in my incompletion log. I find that it is from incompletion procedure 20 assigned to item category REN.
       Since incompletion procedure 20 is shared by other order types and in item categories, I can't change it and at the same time I can't assign a incompletion procedure to REN (the field is display only).
       So what should I do in order to remove such incompletion checking? Thanks.

    Hello,
    If you dont want to check incompletion for this RE order then u just remove the assignment of incompletion log procedure to sales documetn type RE in VUA2 t.code.
    So that system will not do any incompletion check while saving RE order..
    Regards
    Sankar

  • Pegging between SNP orders?

    Is there pegging relationships between SNP orders? If it's so, what are the differences between pegging of SNP and PP/DS orders.
    Thanks

    Hi Mikalai,
    SNP has 3 solvers for rough-cut capacity planning i.e. Heuristics, Capability-To-Match and Optimizer. Heuristics and Optimizer are time-series based solvers and pegging is not supported using these solvers. The only solver that is order-based is CTM and with CTM pegging is possible. Even though CTM is different from rest of the SNP, it is often gets clubbed with SNP functionality.
    SNP can only schedule to a minimum of one day granularity and where as PP/DS can schedule to second. As far as pegging methods are concerned, fixed & dynamic pegging are available for both CTM & PP/DS.
    Hope this helps.

  • HT1918 i create new apple id with my email then i need to purchase for free but i sign my apple id the store is we have credit card and no none credit card how can i use my apple id now

    give me an example please...
    when you sign up a new apple id then after you finish and you want to use your apple id to sign in your iphone your account is you need to review then after you click the review you need to continue to set up your country then you must be agree the terms and conditions and apple privacy policy after that i click agree your account is must be see no none payment method and i dont have use a credit card because is a new apple id.

    What do you mean 'give me an example please' ? And 'dont have use a credit card' ?
    Unless you follow the instructions on this page when creating a new account : http://support.apple.com/kb/HT2534
    then you will need to enter credit card details before the account can be used in the store.
    If you don't have a credit card then you will need to create a new account, but this time follow the instructions on that HT2534 page when creating it. If you want to use the same email address then you will need to replace it on that account first e.g. via the Store > View Account menu option on your computer's iTunes, http://appleid.apple.com, or by tapping on it in Settings > iTunes & App Store on your phone.

  • How to create Billing Plan in sales order using Function module /BAPI

    hi,
    How to create Billing Plan in sales order using Function module /BAPI
    i hv check few FM such
    BILLING_SCHEDULE_READ
    BILLING_SCHEDULE_GET_NUMBER
    BILLING_SCHEDULE_SAVE
    But unable to create billing plan for a sales order.....any other method to create???

    Hi,
    Use this link.
    Create sales order with billing plan via LSMW and BAPI BUS2032
    BAPI or Function to update Billing Plan in Sales Order Items
    Hope this will help you.
    Regards,
    Vijay

  • Can we create the Purchase order that using P&L account or just using account do not use cost center.

    Dear Experts,
    Could you please advise :
    1) Can we create the purchase order that using profit and loss account ? ( if yes , which kind of account assignment category we should use ?)
    2) How to create a purchase order for service charge .( just using GL account )
    Thanks & Best Regards,
    Watson

    Hi,
       May I know why you do not use cost center for consumption?
       You may create a new account assignment category in OME9 by copying K and maintain the cost center as optional. Please note that you have to maintain the item category blank and the account assignment category combination in OMG0. Now, you can use a GL account in PO which doesnt require a cost center assignment (in OBC4 against the field status group of the GL)
       You may use the same account assignment category created in the previous step with item category D, after you maintain the combination of the account assignment with item category D in OMG0.
        Please test the scenario and revert back.
    Regards,
    AKPT

  • Problem with creating Process order confirmation using BAPI

    Hello,
    While creating Process Order confirmation using BAPI_PROCORDCONF_CREATE_TT, material document is getting created. But a line item is inserted in the table AFRU without material document number. When it is created manually using the transaction COR6, the table is getting updated with material doc in the line item. Can anyone let me know what other attributes to be passed in order the update the same?
    Thanks in Advance.
    Regards, Senthil G.

    Hello , I am working with the same Bapi, can you please send me the code to fill the parameters, if I find the same error like you, I will send you the solution if I correct that.
    Thanks for your help.
    [email protected]
    Guatemala, Cempro ADATSA

  • Howto create non-modal dialogs using ADF Faces

    I would like to use Dialogs in a non-modal manner.
    Trying to use
    <af:commandLink useWindow="true" action="dialog:infoPopup" blocking="false">
    <af:setActionListener from="#{row.xyId}" to="#{infoPopup.currentId}" />
    </af:commandLink>
    doesn't work as expected. I'll get the dialog, but I can't use the page behind it.
    Alternatively I tried to show the page using Javascript opening the pageInfo.faces, but here I have an order problem. The onClick event is processed first and the #{infoPopup.currentId} will be populated after rendering the JSF page. But I want to show infos depending on the xyId.
    Is there any other way to open windows/dialogs?
    Thanks in advance
    Stephan

    The "blocking" attribute basically just blocks you from clicking the commandLink or commandButton twice (or more) before the first click has been processed by the server and a response has been received.
    It is a very good util for avoiding those unwanted IndexOutOfBoundsExcepions when a user hits many buttons thus sending multiple requests to the server.
    By the way, I'd like to see the answer to the non-modal dialog window, because we have a need for them, too.
    Kind regards,
    dj

  • Do you need to have Adobe Acrobat X or XI in order to use FormsCentral?  Can FormsCentral be used without Acrobat to create and modify forms?

    Do you need to have Adobe Acrobat X or XI in order to use FormsCentral?  Can FormsCentral be used without Acrobat to create and modify forms?

    Hi Joseph,
    Unfortunately, no. But Adobe does offer a free 30-day trial of Acrobat (absolutely no obligation). So, you could download the trial to fix up the form. For more information, see www.adobe.com/products/acrobat.html. Acrobat is also offered on a subscription basis.
    Sara

  • Create Sales Order Iview Using WD for Java

    Dear Friends,
    I have been assigned some task that is "<b>Create Sales order iview using web dynpro for java".</b>
    I am new in this field, please help me out that from where i should start working on this.
    please forward me some documents in this regrads.
    Thanks & regards,
    Iqbal Ahmd

    Hi Iqbal,
    If you are connecting to SAP system as  backend  then you can proceed creating a webdynpro application using the Adaptive RFC model from where you can call your BAPI's this webdynpro applications can be integrated on to the Enterprise Portal using the webdynpro iviews.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/wd%20java/wd%20tutorials/creating%20a%20web%20dynpro%20application%20accessing%20abap%20functions.pdf
    Go through the following links and tutorials
    http://help.sap.com/saphelp_nw04/helpdata/en/15/0d4f21c17c8044af4868130e9fea07/content.htm
    Tutorials & Samples for Web Dynpro Java [original link is broken]
    Hope it helps you
    regards
    ambicasony

  • Hi, I'm in china and I want to create or use a VNP in order to use Facebook. Please help, Hi, I'm in china and I want to create or use a VNP in order to use Facebook. Please help

    Hi, I'm in china and I want to create or use a VNP in order to use Facebook. Please help, Hi, I'm in china and I want to create or use a VNP in order to use Facebook. Please help

    Sorry. We can't help you violate the law in your country.

  • Restrict "Create Purchase Order" Authorization using vendor number "LIFNR"

    Hello All,
    How can we restrict the creation of purchase order(ME21N) using the vendor number (LIFNR).
    Any helpful idea?
    Regards,

    Hey Sanjay,
    i am facing same problem of uploading multiple line item through LSMW .
    and u did good exploration on  same can u give me some idea,
    how i do modification in LSMW program?
    do u mean i need to do some coding before step CONVERT DATA.
    and can u give some guidline to do it..
    u r hint will be sufficient..
    Thx in Advance..
    Rajesh

Maybe you are looking for

  • Capturing Video from a Camera that only has a USB port

    I have read a number of posts from people who have been frustrated because they can not 'capture' video from a video camera that only has a USB port on it.  Unfortunately, Premier wants to see a Firewire connection; otherwise, it won't connect to a c

  • Restriction of purchase order with valution type

    Dear, I want to restrict the valution type with the document type of purchase order type, Can i do it? E.g My valution type is Fg-dom, I want to use this valution type in stock transfer order , Restrict in other doc.type

  • Proxies...

    Hello, I have a problem with a very simple code that access a URL via a Proxy... URL url; try {      url = new URL("http://someurl.com:8080/servlet/Template?Representation=XML&Symbol=FOR");      System.setProperty("proxySet", "true");      System.set

  • How to format html output of a servlet

    Hello. My servlet/JSP is processed by custom tags and XSL Translation. After all its HTML output looks not formatted. How to format it? It is possible in a standard way (using a web.xml'd directive)? What roughly I want: <html>   <body>   <body> <htm

  • TS3694 iphone 3g stuck on itunes screen wont update get 2 error messages 1015 and 11 how do i fix this please

    trying for ages to do this tried the power off/home button no joy anyone got any suggestions please