Creating notification (Its urgent Plz help)

Hi All,
I am asked to do a development for create notification such that if a person enter the measuring point greater than a specified limit say 60 which according to them is a dangerous point then a notification should be created and it should be triggered to the concerned person that the measuring point is at danger level. How could i achieve this functionality, how should i proceed, the transaction in which they needed this functionality is IK11.
What should i do , how to proceed please help me out as its urgent issue.
Thanks and Regards,
Rachit Khanna

Hi,
<u>check the following fun modules based on it</u>
<b>2078 BAPIs for quality notifications</b>
BAPI_QNOTIFICAT_CREATE Create quality notification
BAPI_QNOTIFICAT_GETCATALPROFIL Determine Catalog Profile for Quality Notification
BAPI_QNOTIFICAT_GETKEYFIGURES Determines Existing Quality Notifications
BAPI_QNOTIFICAT_GETLISTFORCUST Select quality notifications for a customer
BAPI_QNOTIFICAT_GETMATLISTFCUS Select a Customer Material List for Quality Notifications
<b>EEWM_SV_NTF IS-U-WM: Service Notifications</b>
BAPI_ISUSMNOTIF_CREATEMULTIPLE Create service notifications
BAPI_ISUSMNOTIF_SETCOMPLETED Set Service Notification to Completed
BAPI_ISUSMNOTIF_USERSTATUSSET Set User Status for Notification
<b>IWOPM BAPI Functions for PM/CS Notifications</b>
BAPI_ALM_NOTIF_CHANGEUSRSTAT Change User Status of a PM/CS Notification
BAPI_ALM_NOTIF_CLOSE Complete PM/CS Notification
BAPI_ALM_NOTIF_CREATE Create PM/CS Notification
BAPI_ALM_NOTIF_DATA_ADD PM/CS Notification: Add Data
BAPI_ALM_NOTIF_DATA_DELETE PM/CS Notification: Delete Data
BAPI_ALM_NOTIF_DATA_MODIFY PM/CS Notification: Change Data
BAPI_ALM_NOTIF_GET_DETAIL PM/CS Notification: Read Detail Data
BAPI_ALM_NOTIF_LIST_EQUI Select PM/CS Notifications by Equipment
BAPI_ALM_NOTIF_LIST_FUNCLOC Select PM/CS Notifications by Functional Locations
BAPI_ALM_NOTIF_LIST_PARTNER Select PM/CS Notifications by Partners
BAPI_ALM_NOTIF_LIST_PLANGROUP Select PM/CS Notifications by Maintenance Planner Group
BAPI_ALM_NOTIF_LIST_SORTFIELD Select PM/CS Notifications by Sort Field
BAPI_ALM_NOTIF_POSTPONE Reset PM/CS Notification
BAPI_ALM_NOTIF_PUTINPROGRESS Release PM/CS Notification
BAPI_ALM_NOTIF_SAVE Save PM/CS Notification
BAPI_ALM_NOTIF_TASK_COMPLETE PM/CS Notification: Complete Task
BAPI_ALM_NOTIF_TASK_RELEASE PM/CS Notification: Release Task
BAPI_ALM_NOTIF_TASK_SUCCESS PM/CS Notification: Set Task to Successful
<b>IWWW BAPIs for Eqpt. + Service Notifications</b>
BAPI_SERVICENOTIFICAT_CREATE Create service notification
BAPI_SERVICENOTIFICAT_GETLIST Select service notifications according to customer or contact person
Reward points for useful Answers
Regards
Sudheer

Similar Messages

How to install adapters in pi 7.0 ex(tibco adapter) its urgent plz help

hi friends
can any one help me how to insatlll the tibco adapter in pi 7.0 its urgent plz help
thanks in advance
bye
raja

Hi Raj,
Is your Sender System Tibco If so Use JMS Adapter to get the Data from tibco and Use IDOC Adapter to Post in R3. For this you no need to Install any Adapter in XI System.
Similar discussions ,
XI integration with Tibco
XI Integration with Tibco EMS (Using JMS Adapter)
Regards
Agasthuri Doss

RECORDING WITH F-32 .......ITS URGENT PLZ HELP ME

HI GUYS
HERE IS MY REQUIREMENT
I WANT TO DO A RECORDING USING F-32 AND I HAVE TO DO THE FOLLOWING WAYS
1- ENTER ACCOUNT
2-COMPANY CODE
3-CLEARING DATE
4-OPENITEM SELETION
5-I HAVE TO SELECT THE REFERENCE RADIO BUTTON
HERE IS MY ERROR , I DONT KNOW WHAT ARE THE VALUE I HAVE TO ENTER IN THE REFERENCE FIELD AND HOW TO PROCEED ,PLZ HELP ME IT IS VERY VERY URGENT FOR ME.
THANKS A LOT
MRUTYUN

This should get you started:
FORM clearing USING    p_purch_order
                       p_cus
                       p_ven.
DATA: okcode(3).
CLEAR bdcdata.
CLEAR messtab.
REFRESH bdcdata.
REFRESH messtab.
MESSAGE s205 WITH 'Clearing A/R Invoice to Invoice Receipt.'.
PERFORM dynpro USING:
   'X' 'SAPMF05A'        '0131',       "Clear Customer: Header Data
   ' ' 'RF05A-AGKON'      bill_to,
   ' ' 'BKPF-BUDAT'       today_ch,
   ' ' 'BKPF-BUKRS'      'UOFT',
   ' ' 'BKPF-WAERS'      'CAD',
   ' ' 'RF05A-XNOPS'     'X',
   ' ' 'RF05A-XPOS1(2)' 'X',
   ' ' 'BDC_OKCODE'      '/16'.        "Process Open Items
PERFORM dynpro USING:
   'X' 'SAPMF05A'        '0730',       "Amount popup
   ' ' 'BDC_OKCODE'      '/16'.        "Process Open Items
PERFORM dynpro USING:
   'X' 'SAPMF05A'        '0730'.       "Press enter
PERFORM dynpro USING:
   'X' 'SAPMF05A'        '0710',"Clear Customer: Enter selection criteri
   ' ' 'RF05A-AGBUK'     'UOFT',
   ' ' 'RF05A-AGKON'      bill_to,
   ' ' 'RF05A-AGKOA'     'D',
   ' ' 'RF05A-XNOPS'     'X',
   ' ' 'RF05A-XMULK'     'X',
   ' ' 'RF05A-XPOS1(1)' 'X',
   ' ' 'BDC_OKCODE'      '/16'.        "Process Open Items
PERFORM dynpro USING:
   'X' 'SAPMF05A'        '0609',       "Additional Accounts popup
   ' ' 'RF05A-AGKON(1)'   p_ven,
   ' ' 'RF05A-AGKOA(1)' 'K',
   ' ' 'RF05A-XNOPS(1)' 'X'.
PERFORM dynpro USING:
   'X' 'SAPDF05X'        '1102',       "Clear Customer: Select open item
   ' ' 'BDC_OKCODE'      'OMX'.        "Select all
PERFORM dynpro USING:
   'X' 'SAPDF05X'        '1102',       "Clear Customer: Select open item
   ' ' 'BDC_OKCODE'      '/6'.         "Inactive
PERFORM dynpro USING:
   'X' 'SAPDF05X'        '1102',       "Clear Customer: Select open item
   ' ' 'BDC_OKCODE'      '/6'.         "Find
PERFORM dynpro USING:
   'X' 'SAPDF05X'        '2000',       "Select search criteria popup
   ' ' 'BDC_OKCODE'      '/24'.        "Next page
PERFORM dynpro USING:
   'X' 'SAPDF05X'        '2000',       "Select search criteria popup
   ' ' 'RF05A-XPOS1(10)' 'X'.          "Allocation
PERFORM dynpro USING:
   'X' 'SAPDF05X'        '0731',       "Search for Allocation
   ' ' 'RF05A-SEL01(1)'   p_purch_order.                    "PO
PERFORM dynpro USING:
   'X' 'SAPDF05X'        '1102',       "Clear Customer: Select open item
   ' ' 'BDC_OKCODE'      'OMX'.        "Select all
PERFORM dynpro USING:
'X' 'SAPDF05X'        '1102',         "Clear Customer: Select open item
   ' ' 'BDC_OKCODE'    '/05'.          "Active
IF p_test = space.
    okcode = '/11'.                    "save
ELSE.
    okcode = 'BS'.                     "simulate
ENDIF.
PERFORM dynpro USING:
   'X' 'SAPDF05X'        '1102',
   ' ' 'BDC_OKCODE'       okcode.      " save or check
IF p_test NE space.                  "exit from screen after check
    PERFORM dynpro USING:
     'X' 'SAPMF05A'        '0700',
     ' ' 'BDC_OKCODE'       '/15'.     "Save or check
    PERFORM dynpro USING:              "popup
     'X' 'SAPLSPO1'        '0200',
     ' ' 'BDC_CURSOR'      'SPOP-OPTION1'.       "choose yes
ENDIF.
CALL TRANSACTION 'F-32' USING bdcdata MODE u_mode UPDATE 'S'
                                        MESSAGES INTO messtab.
PERFORM get_message TABLES messtab USING text 'CL'.
IF text IS INITIAL.
    PERFORM batch_input USING 'F-32'.
ENDIF.
ENDFORM.                               " CLEARING
Rob

RoleAssingment.create() in PAPI -------URGENT PlZ Help

Hi Guys,
For RoleAssignment.create(role : dirOrganizationalRole, parametricValue : paramName, permissions : 255, category : 5) method
which is the corresponding Class in PAPI .
In studio its there under Fuego.FDI.RoleAssignment
I am not able to locate RoleAssignment.create( ) in PAPI package , Can you tell me the package name.
Thanks
Vin

Hi Vin,
I'm afraid to tell you that PAPI does not contain methods for assigning roles. ALBPM uses an API called FDI which is not public.
Regards,
Ariel

What is the use of enabling "speak notifications" on under the voice over in ios5 ? can it read out my notifications?? plz help...

i have recently updated my iphone 4 to ios 5. in the accessibility options i found the voice over and inside that i found the "speak notifications" . i enabled it on.. but doesnt know whats that for? can ny one help me? will it read out my notifications aloud? but its not working plz help..

create your own entreprise!indeed
I had a "dream" job for a while. a guy - who writes books on software process, and is a member of the agile alliance - had an idea for a product, sat on it for 15 years then left his job and started a company. he assembled his team personally, and 8 of us sat in a room and worked to make his idea a reality. he was the management, and he was also the most talented programmer of us all. the team ran beautifully, we rarely had a deadline to work to, save the odd launch here and there, and there was absolutely zero office politics. all we did was write code, toss ideas about, play with the development process and sometimes go karting, or to the pub, or for a curry or something. I actually looked forward to going to work every day, because of this free reign we had, and we all turned out orders of magnitude more code than anywhere else I've ever worked. but the investors got nervous and pulled funding, leaving the project somewhat crippled. nice while it lasted, though, and I learnt more in my short time there than I did at university, and across 5 years experience in other companies
so the answer is: come up with an idea, be expert enough to assemble and manage the perfect team and convince some rich people to lend you lots of money. simple. but be prepared. this guy was routinely doing 18 hour days, 6 days a week (he was a Christian, otherwise he'd undoubtedly be doing 8 days a week). he'd be out and about most of the day doing sales and marketing, flying around the world for meetings and stuff, then come into the office and code for 8-9 hours a night

Its urgent:plz tel me what is the steps move to produection oaf page.

Hi All,
I developed one oaf page.that page move to production.
i already move to produection but its not working fine.
its throw an error.
plz tell me what is the steps follow when move to production.
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_NO_REGION_DATA. Tokens: REGIONCODE = /wnsgs/oracle/apps/ap/agingbuckets/webui/AgingBucketsPG;
     at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:529)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3719)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3452)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1005)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:508)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:429)
     at oa_html._OA._jspService(_OA.java:85)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
     at oracle.jsp.JspServlet.service(JspServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
     at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
     at oa_html._RF._jspService(_RF.java:102)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
     at oracle.jsp.JspServlet.service(JspServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
     at org.apache.jserv.JServConnection.run(JServConnection.java:294)
     at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
Exception:
oracle.adf.mds.MetadataDefException: Unable to find component with absolute reference = /wnsgs/oracle/apps/ap/agingbuckets/webui/AgingBucketsPG, XML Path = null. Please verify that the reference is valid and the definition of the component exists either on the File System or in the MDS Repository.
     at oracle.adf.mds.internal.MetadataManagerBase.findElement(MetadataManagerBase.java:1350)
     at oracle.adf.mds.MElement.findElement(MElement.java:97)
     at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:503)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3719)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3452)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1005)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:508)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:429)
     at oa_html._OA._jspService(_OA.java:85)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
     at oracle.jsp.JspServlet.service(JspServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
     at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
     at oa_html._RF._jspService(_RF.java:102)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
     at oracle.jsp.JspServlet.service(JspServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
     at org.apache.jserv.JServConnection.run(JServConnection.java:294)
     at java.lang.Thread.run(Thread.java:534)
Exception:
oracle.adf.mds.MetadataDefException: Unable to find component with absolute reference = /wnsgs/oracle/apps/ap/agingbuckets/webui/AgingBucketsPG, XML Path = null. Please verify that the reference is valid and the definition of the component exists either on the File System or in the MDS Repository.
     at oracle.adf.mds.internal.MetadataManagerBase.findElement(MetadataManagerBase.java:1350)
     at oracle.adf.mds.MElement.findElement(MElement.java:97)
     at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:503)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3719)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3452)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1005)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:508)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:429)
     at oa_html._OA._jspService(_OA.java:85)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
     at oracle.jsp.JspServlet.service(JspServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
     at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
     at oa_html._RF._jspService(_RF.java:102)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
     at oracle.jsp.JspServlet.service(JspServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
     at org.apache.jserv.JServConnection.run(JServConnection.java:294)
     at java.lang.Thread.run(Thread.java:534)
thanks
Seshu.
Edited by: its urgent on Feb 8, 2012 2:31 AM

Deployement steps:
1) Copy the Class files and move to into server
We can get class file >>F:\OAF\jdevhome\jdev\myclasses\imp
\myprojects
(imp) Load into server (java TOP) >>D:\oracle\viscomn\java\
2) Run the XML import Scripts in Command Prompt
F:\OAF\jdevbin\jdev\bin
For every Page and every Lov region
3) Next Go to apps
System administrator Create Function for a page
Description tab:
Function Name : IMP_STUDENT_REGISTRATION
User Function Name: Imp Student Registration
Description : Imp Student Registration
Properties Tab:
Type: SSWA JSP function
WebHTML Tab
Function:
HTML call: OA.jsp?page=/imp/oracle/apps/po/student/webui/ImpStudentResitrationPG
Note: DO the same for all the pages
4) Attach these Functions to Imp Student Operations menu to Imp Student Operations responsibility to User.
5) Bounce the apache.
Regards
Meher Irk

Urgent plz help me out about cartesian product

plz...its urgent,can anyone help in the following query where iam getting cartesian product,so how to get result without cartesian product
this is the query
SELECT DISTINCT MIS.segment1 "ITEM CODE",
MIS.DESCRIPTION "DESCRIP"
,MIS.Primary_uom_code "UOM",
MTL.LOT_NUMBER "LOT NUMBER"
,A.PARTY_NUMBER "CUSTOMER NUMBER",
A.PARTY_NAME "CUSTOMER NAME",
(A.ADDRESS1||A.ADDRESS2||A.ADDRESS3||A.ADDRESS4) "SHIP TO",
B.DELIVERY_DETAIL_ID "DO NO",B.SHIPPED_QUANTITY "SHIPPED QUANTITY"
,C.ULTIMATE_DROPOFF_DATE "ISSUED DATE"
,D.ORDER_NUMBER "SALES ORDER NUMBER"
,E.LINE_NUMBER "SALES ORDER LINE"
FROM MTL_SYSTEM_ITEMS MIS
,MTL_TRANSACTION_LOT_NUMBERS MTL
,HZ_PARTIES A,
WSH_DELIVERY_DETAILS B,
WSH_NEW_DELIVERIES C,
OE_ORDER_HEADERS_ALL D,
OE_ORDER_LINES_ALL E
WHERE MIS.INVENTORY_ITEM_ID=MTL.INVENTORY_ITEM_ID
AND B.INVENTORY_ITEM_ID=MIS.INVENTORY_ITEM_ID
AND A.PARTY_ID=B.CUSTOMER_ID
AND B.DELIVERY_DETAIL_ID=C.DELIVERY_ID
AND MIS.INVENTORY_ITEM_ID=E.INVENTORY_ITEM_ID
AND D.HEADER_ID=E.HEADER_ID

A lot of times when I get duplicate results, I'll do a select * and see why. Often one of those tables will have a sequenced value that could repeat several times for a combination of values.
If thats the case, you may need to add something like:
...and a.id = (select min(id)
from b
where a.col = b.col)

Java Mail Project HELP Required....URGENT PLZ HELP!!!

hello there!!
i took up a pjct for my engineering on java mail..got the code..and i thought that ill analyse it...the code is submitting the mail to the smtp server but after dat its failing to deliver to the client..as i can see this error in the logs on SMTP server...can anyone help me out in analysing this code!!!
plz help, exams are near...(am new to java)
//java FINAL!
import javax.swing.*;
import java.net.URL;
import javax.mail.*;
import javax.mail.internet.*;
import java.util.*;
import java.awt.*;
import java.awt.event.*;
public class EmailProg extends JPanel implements ActionListener {
protected JTextArea textArea;
protected String newline = "\n";
static final private String composemail = "compose";
static final private String sendmail = "send";
static final private String about = "about";
static final private String submit = "submit";
static final private String exit = "exit";
JLabel lSubmit = new JLabel("Submit");
JButton subbutton = new JButton();
JTextArea emailfrom = new JTextArea(1,1);
JTextArea emailto = new JTextArea(1, 1);
JTextArea emailsubject = new JTextArea(1, 1);
JTextArea emailmessage = new JTextArea(25, 1);
//------BAG LAYOUT
JLabel lFrom = new JLabel("From:");
JTextField cFrom = new JTextField(32);
JLabel lTo = new JLabel("To:");
JTextField cTo = new JTextField(32);
JFrame frame2 = new JFrame("Compose New");
JLabel lSubject = new JLabel("Subject");
JTextField cSubject = new JTextField(32);
JLabel lMessage = new JLabel("Body");
JTextArea cMessage = new JTextArea(5,32);
//====================================
public EmailProg() {
super(new BorderLayout());
//Create the toolbar.
JToolBar toolBar = new JToolBar();
addButtons(toolBar);
//Create the text area used for output. Request
//enough space for 5 rows and 30 columns.
textArea = new JTextArea(5, 30);
textArea.setEditable(false);
textArea.setText("Welcome to Jeff's email program! With this program you can compose and send emails. I hope I get a good grade on thise, and marine world finds a good use for it :-D:-D (implements really just testing the scroller!!!)");
JScrollPane scrollPane = new JScrollPane(textArea);
//Lay out the main panel.
setPreferredSize(new Dimension(450, 110));
add(toolBar, BorderLayout.NORTH);
add(scrollPane, BorderLayout.CENTER);
//==================================
protected void addButtons(JToolBar toolBar) {
JButton button = null;
//first button
button = makeNavigationButton("/toolbarButtonGraphics/general/ComposeMail24.gif", composemail ,"Compose new Email", "compose new");
toolBar.add(button);
//second button
button = makeNavigationButton("toolbarButtonGraphics/general/SendMail24.gif", sendmail,"Send The Mail","send");
toolBar.add(button);
//third button
button = makeNavigationButton("toolbarButtonGraphics/general/About24.gif", about,"About","About");
toolBar.add(button);
//exit button
button = makeNavigationButton("toolbarButtonGraphics/general/Stop24.gif", exit, "Exit", "Exit");
toolBar.add(button);
//===================================
protected JButton makeNavigationButton(String imageName, String actionCommand, String toolTipText, String altText) {
//Look for the image.
String imgLocation = imageName;
URL imageURL = EmailProg.class.getResource(imgLocation);
//Create and initialize the button.
JButton button = new JButton();
button.setActionCommand(actionCommand);
button.setToolTipText(toolTipText);
button.addActionListener(this);
if (imageURL != null) {                      //image found
button.setIcon(new ImageIcon(imageURL));
} else {                                     //no image found
button.setText(altText);
System.err.println("Resource not found: "+ imgLocation);
return button;
//=============================
public void actionPerformed(ActionEvent e) {
String cmd = e.getActionCommand();
String description = null;
// Handle each button.
if (exit.equals(cmd)){
textArea.setText("");
description = "EXITING";
System.exit(0);
if (composemail.equals(cmd)) { //first button clicked
textArea.setText("");
description = "Write new mail.";
composeWindow();
} else if (sendmail.equals(cmd)) { // second button clicked
textArea.setText("");
description = "This button does'nt do anything yet :x";
} else if (about.equals(cmd)) { // third button clicked
textArea.setText("");
description = "About this program. (See pop-up)";
coolWindow();
else if (submit.equals(cmd))
if (cFrom.getText().equals("")||cTo.getText().equals("")||cSubject.getText().equals("")||cMessage.getText().equals(""))
textArea.setText("One or more of the fields was not filled in.");
else{
try {
String smtpServer="serverhere";
String to=cTo.getText();
String from=cFrom.getText();
String subject=cSubject.getText();
String body=cMessage.getText();
send(smtpServer, to, from, subject, body);
textArea.setText("");
description = "Mail Sent.";
JOptionPane.showMessageDialog(null, "Message Sent.");
catch (Exception ex)
System.out.println("Usage: java com.lotontech.mail.SimpleSender"
+" smtpServer toAddress fromAddress subjectText bodyText");
//CLOSE THE FRAME2 WINDOW IIIIIIIIFFFFFFF SENDING IS SUCCESSFUL!!
}//end of else during send
}//end of if of submit
displayResult(description);
//============================
protected void displayResult(String actionDescription) {
textArea.append(actionDescription + newline);
//=============================
public void coolWindow() {
JFrame frame = new JFrame("About");
JTextArea filecontents = new JTextArea();
filecontents.setText("Use the tool bar to compose\n compose new emails, in which you can\n send to anyone on the\n srvhs email server. \n Fill in all the blanks before pressing send. If you dont\n you will receive an error! \n For more information about this program click on the\n information button.");
frame.getContentPane().add(filecontents, BorderLayout.CENTER);
frame.pack();
frame.setResizable(false);
frame.setSize(300,200);
frame.setVisible(true);
//===============================
public void composeWindow() {
frame2.getContentPane().setLayout(new GridBagLayout());
frame2.setResizable(false);
frame2.setSize(600,500);
frame2.setVisible(true);
GridBagConstraints gbc = new GridBagConstraints();
gbc.insets = new Insets(5, 10, 5, 10);
cMessage.setLineWrap(true);
subbutton = makeNavigationButton("toolbarButtonGraphics/general/SendMail24.gif", submit,"submit","submit");
addRow(gbc, lFrom, cFrom);
addRow(gbc, lTo, cTo);
addRow(gbc, lSubject, cSubject);
addRow(gbc, lMessage, cMessage);
addRow(gbc, lSubmit, subbutton);
//===============================
private void addRow(GridBagConstraints gbc, Component left, Component right) {
gbc.gridx = GridBagConstraints.RELATIVE;
gbc.gridy = GridBagConstraints.RELATIVE;
gbc.gridheight = 1;
gbc.gridwidth = 1;
gbc.anchor = GridBagConstraints.EAST;
frame2.getContentPane().add(left, gbc);
gbc.gridwidth = GridBagConstraints.REMAINDER;
gbc.anchor = GridBagConstraints.WEST;
frame2.getContentPane().add(right, gbc);
frame2.pack();
//=======================
public static void send(String smtpServer, String to, String from, String subject, String body) {
try {
Properties props = System.getProperties();
props.put("localhost", smtpServer);
Session session = Session.getDefaultInstance(props, null);
System.out.println(smtpServer);
// -- Create a new message --
Message msg = new MimeMessage(session);
// -- Set the FROM and TO fields --
msg.setFrom(new InternetAddress(from));
msg.setRecipients(Message.RecipientType.TO, InternetAddress.parse(to, false));
// -- We could include CC recipients too --
// if (cc != null)
// msg.setRecipients(Message.RecipientType.CC
// ,InternetAddress.parse(cc, false));
// -- Set the subject and body text --
msg.setSubject(subject);
msg.setText(body);
// -- Set some other header information --
msg.setHeader("X-Mailer", "LOTONtechEmail");
msg.setSentDate(new Date());
// -- Send the message --
Transport.send(msg);
System.out.println("Message sent OK.");
catch (Exception ex)
ex.printStackTrace();
public static void main(String[] args) {
JFrame frame = new JFrame("EmailProg");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
EmailProg newContentPane = new EmailProg();
newContentPane.setOpaque(true);
frame.setContentPane(newContentPane);
//Display the window.
frame.pack();
frame.setVisible(true);
}

The code to retrieve the messages from SMTP
finally all working fine...
thanx guys!!!
package EmailProg;
import javax.mail.*;
import javax.mail.internet.*;
import java.util.*;
import java.io.*;
* A simple email receiver class.
public class SimpleReceiver
    * Main method to receive messages from the mail server specified
    * as command line arguments.
public static void main(String args[])
    try
      String popServer=args[0];
      String popUser=args[1];
      String popPassword=args[2];
      receive(popServer, popUser, popPassword);
    catch (Exception ex)
      System.out.println("Usage: java com.mail.SimpleReceiver" +" popServer popUser popPassword");
    System.exit(0);
     * "receive" method to fetch messages and process them.
   public static void receive(String popServer, String popUser, String popPassword)
     Store store=null;
     Folder folder=null;
     try
       // -- Get hold of the default session --
       Properties props = System.getProperties();
       Session session = Session.getDefaultInstance(props, null);
       // -- Get hold of a POP3 message store, and connect to it --
       store = session.getStore("pop3");
       store.connect(popServer, popUser, popPassword);
       // -- Try to get hold of the default folder --
       folder = store.getDefaultFolder();
       if (folder == null) throw new Exception("No default folder");
       // -- ...and its INBOX --
       folder = folder.getFolder("INBOX");
       if (folder == null) throw new Exception("No POP3 INBOX");
       // -- Open the folder for read only --
       folder.open(Folder.READ_ONLY);
       // -- Get the message wrappers and process them --
       Message[] msgs = folder.getMessages();
       for (int msgNum = 0; msgNum < msgs.length; msgNum++)
         System.out.println(msgs[msgNum]);
     catch (Exception ex)
       ex.printStackTrace();
     finally
       // -- Close down nicely --
       try
         if (folder!=null) folder.close(false);
         if (store!=null) store.close();
       catch (Exception ex2) {ex2.printStackTrace();
}

Its urgent pls help me .

how can i call a portal from webdynpro application
my requirment is
i was created webdynpro application.
in that i was created one view . in that i was created one button (go).
if i click that button i want move some other portal.
how can i acchive pls help me.
its urgent.
pls send any example programe
Message was edited by:
madipadiga nagaraju
Message was edited by:
madipadiga nagaraju

hi,
there is no direct tcode for going to webdynpro component/interfaces in ecc 6.0.
but u have se58 in ecc 5.0,as webdynpro convertor.u give ur program name and click web dynpro convertor button then it takes u to se80 .but this wda(webdynpro abap) component comes as in application tree hierarchy .
i can say in wda component refers a class .if u select webdynpro component/interface,it ask u to create a class or interface.
after that it automatically generate component controller(it is also a class),
interface view and windows.all these 3 are classes.for every window one interface view will be created.ie.. window is internal visible where as interface view is external visible.
u create view and embed these views in windows.by going to the window layout,right click on the window name and click embed view.u can enbed as many view as u wish.in order to navigate from one view to other view ,click "create navigation" by right clicking the view plugs.
by default windows and view have inbound plugs.this is literally a event of that class.
if u want to navigate from view1 to view2 ,create outbound plug for view1,the click outbound plug of view1 and right click the click create navigation the select inbound plug of view2.
then create a application .this is simillar of creating an object.
click on this object and test .this will open in browser.
for deploying u have use "sap webdynpro iview".

Refreshing JEditorPane (Urgent) plz help

hello programmers,
i'm building an html editor:
My html editor has a split pane, the 2 pane got of the split pane are JEditorPanes, one on which i write tag and the other i display them,... thankfully all's working great, my syntax is highlighting and the html is displayed well but i've got the following problem:
when i save a html page , i wanna my browser (on the right side of the slipt pane) to display the html page... it's ok .. it displays it with the method JHTMLEditorPane.setPage(file:/// directory/ file) but the problem is that when i save the page again using the same filename... my html page on the JHTMLEditorPane stays the same... it does not update...
is their a refresh function for the JEditorPane? how can i update my JHTMLPane to reflect the changes i've brought to it? ONe thing , the page changes when i save it by aother file name..... PLz help it's very urgent!!!!!!!
Bernard

Have you tried to close and then re-open the file in your editorpane after you've saved?
It will work when you change the name because it has to open the file as new. Java can't dynamically update values upon files like C does with pointers.

Delete duplicate entriess from the internal table its urgent pls help.

Hi friends,
Hope everybody is doing good,Here is m query on delete duplicate data from the intenal table.
I have an internal table which contain data in the following format.
Doc No Comp Cod Vendor Assignment
1500000009 JM11 00000000
1500000008 JM11 20070212(Repeating)
1500000007 JM11 20070212
1500000006 JM11 00000000
1500000005 JM11 00000000
1500000004 JM11 00000000(Repeating)
1500000003 JM11 00000000 (Repeating)
1500000002 JM11 00000000
1500000001 JM11 20050302
1500000000 JM11 00000000
1500000003 JM11 10000088
1500000001 JM11 10000088
1500000030 JM11 10006260
1500000010 JM11 10006269
1500000008 JM11 10006269
1500000006 JM11 10006269
1500000004 JM11 10006269
if you see the document numbers,there are some document number which are repeating here,there are some document numer which contain vendor number but not the assignments,some of the document numbers contain the assignments but not the vendors.
If my internal table contain this kind of data with repeted document numbers than i want the document number which contains only the vendor number.
Pls help me with the appropriate logic,its urgent.
Thanks a lot
mrutyun^

Hi,
<u><b>Deleting Adjacent Duplicate Entries</b></u>
To delete adjacent duplicate entries use the following statement:
DELETE ADJACENT DUPLICATE ENTRIES FROM <itab>
[COMPARING <f1> <f2> ...
|ALL FIELDS].
The system deletes all adjacent duplicate entries from the internal table <itab>. Entries are
duplicate if they fulfill one of the following compare criteria:
Without the COMPARING addition, the contents of the key fields of the table must be
identical in both lines.
If you use the addition COMPARING <f1> <f2> ... the contents of the specified fields <f1>
<f2> ... must be identical in both lines. You can also specify a field <fi> dynamically as
the contents of a field <ni> in the form (<ni>). If <ni> is empty when the statement is
executed, it is ignored. You can restrict the search to partial fields by
specifying offset and length.
If you use the addition COMPARING ALL FIELDS the contents of all fields of both lines
must be identical.
You can use this statement to delete all duplicate entries from an internal table if the table is
sorted by the specified compare criterion.
If at least one line is deleted, the system sets SY-SUBRC to 0, otherwise to 4.
Examples
DATA: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA ITAB LIKE HASHED TABLE OF LINE WITH UNIQUE KEY COL1.
DO 4 TIMES.
LINE-COL1 = SY-INDEX.
LINE-COL2 = SY-INDEX ** 2.
INSERT LINE INTO TABLE ITAB.
ENDDO.
LINE-COL1 = 1.
DELETE TABLE ITAB: FROM LINE,
WITH TABLE KEY COL1 = 3.
LOOP AT ITAB INTO LINE.
WRITE: / LINE-COL1, LINE-COL2.
ENDLOOP.
The output is:
2 4
4 16
The program fills a hashed table with a list of square numbers. The DELETE
statement delete the lines from the table where the key field COL1 has the contents 1 or 3.
Regards,
Bhaskar

FlashPlayer suddenly turns black screen, urgent plz help

I am a game developer. my game work fine for two months. but recently some player told me that when in playing games flashplayer suddenly turns black screen. when i using flashplayer debug. it didn't throw any excepetion or error. and when i right click in flashplayer content. the menu show 2 opptions. do not load movie and flashplayer verison is 11.6.602.180...
many many player told me about this. and my game is still running for all the player. so plz help, verry urgent, thx

If they are on Windows, they may need to update their display adapter drivers; see http://forums.adobe.com/thread/945765

Urgent plz help me......plz

Am very nem to jsp.
am doing my final year project in jsp.
I want to retreive value in the textbox depending on the selectino made in the dropdown.
in the dropdown menu i retrieve employee id frm backend. n in the textbox i shuld get employee name depending on the selection made in the dropdown list. that is data in the textbox shuld change depending on the selectin made in dropdown.
here is my code which i tired but in the textbox the value is alwys remaning the last record value n it is not changing depending on slectino made in dropdwon list
<%@ page import="java.util.*" %>
<%@ page language="java" %>
<%@ page import="java.sql.*" %>
<HTML>
FAQ
Category choice
<FORM ACTION="selection.jsp" METHOD="POST">
<%
String nameselection = null;%>
<SELECT NAME="Category" id= Category >
<%
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection conn=DriverManager.getConnection("jdbc:odbc:man","scott","tiger");
Statement statement = conn.createStatement();
ResultSet rs = statement.executeQuery("SELECT DISTinCT empid FROM employee" );%>
<OPTION VALUE='nochoice'>Please choose a category</OPTION>";
<%while(rs.next()) {
nameselection = rs.getString("empid");%>
<OPTION value ="optcategory"><%out.println(nameselection);%>
</OPTION>
<% } %>
</SELECT>
Question selection
<%
String password = null;%>
<%ResultSet m1 = statement.executeQuery("SELECT * FROM employee WHERE empid = ( '" + nameselection + "')");
String mm1;
while(m1.next()){%>
<input type =text name=mm value="<%= m1.getString(2) %>">
<%}%>
</FORM>
</HTML>
plz help me....
am very new to it.
Thanx in advance

hi manisha
good try & sorry for late reply
To say the truth i'm too new to jsp
i'll give u my code see it for reference.. if u have any doubts in that pls don't forget to ask me
function display()
var index=document.form1.drug.value;
document.form1.hid.value=index;
form1.submit();
function refresh()
     var indexOfcombobox = document.form1.drughid.value;
     sel = document.form1.drug;
     for (i=0; i<sel.options.length; i++) {
          if (sel.options.text ==indexOfcombobox ) {
               sel.selectedIndex = i;
<form name="form1" method="post" action="">
<body onload="refresh() ">
<select name="drug" id="drug" value="hid" onChange="display()">
<option value="" selected> </option>
<%
while(rs.next())
%>
<OPTION VALUE="<%=rs.getString("DrugName")%>"><%=rs.getString("DrugName") %></OPTION>
<%
%>
</select>
<input type="hidden" name="hid">
</div></td>
</tr>
<tr>
<td>NDC code #</td>
<td>
<%
//query for selecting the values from the database
String sql1 = "SELECT ProductCode,DrugName,Dosageform from ProductMaster where DrugName='"+request.getParameter("hid")+"' ";
rs=stm.executeQuery(sql1);
%>
<% while (rs.next())
String val1=rs.getString("ProductCode");
String val2=rs.getString("DrugName");
String val3=rs.getString("Dosageform");
out.println (val1 +"</td>");
out.println ("<input type=hidden name=ndc value='" + val1 + "'>");
out.println ("<input type=hidden name=drughid value='" + val2 + "'>");
out.println("<td>Dosageform    :     "+val3);
}Regards
kalai

Urgent Plz Help

hi
actually my problem is that i have to print the page which is not in the brouser
i,e a html page which cannnot be viewed but has to printed.
normlly a page opened in any brouser can be given to the printer but how to give the unseen page to a printer .I dont know if it can be done through java but if it can it has to be done using jdk1.3.
plz help me in this..

First of all , Wrong forum!! This is a client side issue(unless you are trying to print the page in a server side printer). Anyway, to print in client side put the unseenable data in a hidden frame and use javascript window.print(). If you are using DHTML enabled browser(IE 5+) , you will be able to use CSS to specify alternate document for printing <link rel=alternate media=print href="printversion.doc"> .See http://www.pageresource.com/dhtml/d_a_01.htm

Query on FBL3N................Urgent plz help me on this.

Hi Friends
Here is my query,
I am changing the tcode FBL3N to add one extra field into it and to display data in the name1 field for the spcific entries in the selection screen,
After selecting the All item radio button and giving the range in the select-options when i am pressing F8 it is giving me the correct output,after that when i am trying to display the name1 field by selecting the ctrl+f8 button and pressing the apply button it is giving me the error as
"An internal error has arisen in the form routine ANALYZE_ACT_FIELDCAT
for program RFITEM_INC.
This is due to inconsistencies between table T021S (special fields) and
structure RFPOSEXT."
I changed everything to Y* but still it is giving the error.
Plz help me in this if someone face the same prob or someone having idea on this.
Thanks a lot in Advance
Mrutyun^

Hi Mrutyunjaya,
Did you manage to resolve this error?
Thanks and Regards
Pras

Creating notification (Its urgent Plz help)

Similar Messages

Maybe you are looking for