Creating Numbers Template with pre-made formulas

Hello,
I am trying to to create a 'Numbers template'. But I need to divide in by zero and when I remove the numbers in order to save the templates I see this ugly red sign (which creates all the later ugly red signs) in the spreadsheet. Since this is a template, is there any way to make Numbers stop complaining about not funding numbers in the cells?
Thank you,
PA

Atma,
In cases like this I like to test the source cell to see if there is anything there before using the data.
Here is a simple example:
=IF(A>0, B/A, "-")
This says: If A is greater than zero, divide B by A, else display a hyphen. This will eliminate that error condition.
You might still get your errors in subsequent expressions using that result, but I can't tell from here.
Jerry

Similar Messages

Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

As far as I know, motion templates can only be used with DVD Studio Pro. FCP X only lets you add a background image to the DVD menu.

Basic question, how to create rtf template with a given xml file

Hello guys
I am new to BI publisher and I am learning how to create rtf templates using given xml fiel definitions by following the bi publisher guide
The steps I am following is:
1, create template using template builders, which is downloaded into MS words.
2, In the empty template, map the xml columns with template field using BI publisher tag
3, upload the template to BI Publisher as a layout.
That's all I can understand.
My question is:
1,in which above step do I import XML file into template builder (if not bi publisher), how to do so?
2,After template is created, how to associate this template layout with existing reports in BI Publisher, or is it necessary at all?
3,In the template content in MS Word template builder, what should I enter other than BI publisher tags for mapping XML field to desired template field
Or, if my understand of this process is entirely wrong, what's the right process of creating rtf template with a given XML file definition
Thanks

If you have a BI Publisher desktop installed, have a look a the demos,.. should answer most of your basic questions.
(Windows) Start->Programs->Oracle BI Publisher Desktop->Demos
Invoice Demo - good one for those with E-Business Suite
Report Demo - Sample using BI Publisher

Can you please help with creating a spreadsheet with a specific formulas that affect popup menus?

I am a referee assignor for soccer tournaments. I would like to create a spreadsheet template that I can use that will help me with this. I have a game schedule spreadsheet with the following columns. Date, start time, age group, home team, away team, field #, center referee 1, assistant referee 1 and assistant referee 2. Here is what I would like to do if possible. If a referee has a game at say 10:00am and ends at 11:45am I would like to have a popup menu in the referee columns with referee names where this particular referee name wouldn't show for any games between 10:00am and 11:45. I should mention that for each different age group the game lengths are different. I can also add a end time column in the spreadsheet if I need to.
Is this even possible and if so does anyone have any suggestions on how to accomplish? I should also mention I am not very savvy on creating formulas.
Thanks in advance
Robert

Thanks. This is what my schedule looks like.
As you can see this particular official is scheduled for 10:00am. That particular age group game is 80 minutes long. I would like for his name to not appear in the dropdown until he is available again. I can create another column with the end time if needed or my thought was to sort the games by age group and enter a formula for each age group. It might sound like a lot of trouble but if there is a way to do it it would help tremendously as some of theses tournament have 300-400 games and it is hard to keep track of each referee and not double book them for the same time slot.
I am not even sure this can be done but trying to have numbers (or excel for that matter) to do the heavy lifting for me.

How to create a complaint with pre-decessor document Inovice?

Hello experts,
I need create a complaint with reference to a pre-decessor document type Invoice (apart from other types such as sales order and service order). Can someone enlighten me
1) how to create an invoice in IC Web Client and backend?
2) how to create a complaint with reference to this created invoice in IC Web client and backend?
Thanks a lot!!!

Hi Easwar
Thanks a lot for answering the question.
Yes I do have CRM Billing documents. But the problem is
a) either the billing document doesn't have Transfer to Accounting status Transferred or
b) a transferred billing document, but all items have error "Unable to offset billing item 90003458 0000000060" etc.
Do you know
1) how I can make a billing document have "Transferred" status? Pressing "Transfer to Accounting" button in the billing document overview page will only set the status to "Being transferred". And it's always being tranfered.
2) What does the error "Unable to offset billing item ... "mean? How to get rid of them?
Thanks a lot!

Trying to create a template with adjustable text fields.

I need to creat a form or template with adjustable text and image fields. I need to have a background template for multiple pages that when I make a change to the template it make the changes to all pages, like the master page of indesign. I also need to have text and image fields that are specific to each page but the dimensions and placement are controled by the template,but the information inside is page spacific. What program should I use and anyone know a tutorial for help?

What you want would require elaborate programming or dealing with variables in Framemaker or InDesign (Server) to dynamically generate the output upon request. You can of course get part of the features using normal variables in ID e.g. to pull linked images based on some parameters, but generally your request sounds too complex to deal with all scenarios.
Mylenium

Cisco webview - create a template with new input parameter

Dear all,
I know the Infomaker will help to create a template for webview. I have done with some custom template. My problem is that I can not change the input parameter for webview page. For example, if the template under the skill group, I can only choose with skill group and datetime to generate the report.
I want to change the input field on the web page, for example the input will be a calling number and a range of datatime and the webview will query on the detail table and pop out some detail call.
Or I want to run the report for outbound dialer, the input is the customer number and the output page will be the status of this customer call (closed, retry, pending...)
Can I create a new set of template like Call Detail beside the default Call Type, Agent, Skill Group...?
Please help to give me some advices.
Thank you,
Thanh

I've personally never seen anything like this done, not saying it is not possible, but you might have to use a different reporting mechanism all together in order to achieve something like this. I've always been curious why someone would request a report on a single call, just seem like a single call will never trully give you a true representation of your call center metrics.
Sorry if this is not much help.
david

Creating a template with drawing scales

I am creating a template for an architecture office. We need to have a drawing scale on most pages so I would like to include one in the master. However, the drawing scale changes according to the drawing on each sheet. Basically, we need to be able to choose between a set of scales on each page. I'm picturing a drop down menu where I can load each file and choose which ever is needed. Does such a thing exist? Has anyone run into a similar situation and come up with another solution?
Thanks for your help!

Not like that, but if you were to anchor each scale in a paragraph, you could potentially use conditional text to show and hide different ones. The limitation for that is conditional text is global so it's the whole file, not a page-by-page choice. If you need page-by-page you can make a set of masters withthe different scales (all based on one common master page so you only have to add the scales), then assign the appropriate master.

I am creating a template with drop down menus in Numbers. I want to be able to insert options into the middle of my list at a later date if I need to, but I can only insert at the end of the drop down list. Is there a different program I could be using?

I need to be able to add in more options into my drop down list in Numbers at a later time, not only at the bottom but say in the middle of the list. Should I be using a different program that can allow this to work? Thank you!

This forum thread appears to point towards the problem.
Re: Unable to Switch Audio Sync Settings

HT3354 How do i create a column with a percentage formula

Im really struggling creating a line of columns with different formulas.
colin

The title of your post and the text of your post sound like two different questions. One is about creating a column of percentages and the other is about a "line of columns with different formulas". Neither gives enough information about the problem for anyone to provide a good answer, unless we guess at what you are asking. Here is my guess:
If B2 has a number in it and C2 has the formula =B2*5%, C2 will be 5% of B2. If you copy/paste or fill-down that formula to the rest of the column, C3 will be 5% of B3, C4 will be 5% of B4, etc.
I have no idea what "a line of columns with different formulas" means so I'm not going to hazard a guess.

Cannot create Windows Media with PRE 8 - Writer not found

I have recently installed PRE 8 (paid single user) on my Windows 7 dual-core machine, and I have installed the 8.0.1 patch. I can import, edit and render video and audio just fine. I can save files as AVI and MPEG, but whenever I try to save a my movie as a Windows Media file, the rendering progress bar is displayed followed immediately by a pop-up entitled "Export error" with notification "Writer not found." I have reinstalled PRE8, turned of my antivirus, but nothing seems to resolve this problem. I cannot seem to find any remedy on the web. Anyone else experiencing this issue?

As I mentioned above I am running Windows 7 (omitted above: 64 Home Premium Edition). I have all updates installed, and I have verified I have latest device drivers. With regards to QuickTime, I am suffering from the accursed "Error 46: Could not load or fine Quicktime Active X control." So I am running withouy quicktime, but do I really need an Apple product to produce Windows Media?
I have tried to correct the Error 46 problem by using the "Subinacl/Reset" solution desribed in many places (e.g. http://research.gerger.com/?view=lab:en&aID=1006 under "Quicktime Annoyances"), but that solution isn't working for me. I can see that the issue is with registry priviledges -- no one can read the QT registry keys once QT is installed ("Insufficient Priviledge"). I suspect this solution isn't working, because I never installed an account named "administrator" on my machine, and it looks like the reset.cmd script assumes that you have.
I sure hope I don't need Quicktime to produce Windows Media, otherwise, I have spent a lot of money on a tool (PRE 8) that won't serve my needs.

How to create a template with global buttons and copyright?

Hi,
We are trying to rebuild applications using 11G. In 10133, we use panelpage as the base of the template. With Jdev11g, I cannot find the panelpage component anymore. Then which component should we use and how to start with it? Is there any article talks about it?
Thanks,
Annie

Hi Annie,
Indeed the panelPage layout component is not present in 11g. In the other hand, for 11g we have done a lot of improvements for templating JSF applications. You can find an article from Steve Muench here http://www.oracle.com/technology/oramag/oracle/08-jul/o48frame.html
Basically in order to replace your panelPage you can use a PanelGroupLayout's facets or the ones from the panelHeader.
Goodl Luck
Juan C.

Problem when trying to create a template with vdi 3.2.1

Hi,
I´m using vdi 3.2.1 in solaris 10 x86. I´m using Virtualbox in the same server as a desktop provider. I created a windows 7 virtual machine without any problem.
My problem appears when I´m trying to import that VM into a template, I follow "Pools --> then select the pool --> And from the tabs Bar, select TEMPLATE --> Import Template..." Then from the new window, select Hypervisor and select the VM that I want to import it as a template.
The importing process began and After the 100%, the vdi says "Job Failed" "Could not convert desktop [ide=18] to template".
The /var/adm/messages has this error:
vdix86 cacao[5067]: [ID 702911 daemon.crit] com.sun.vda.service.storage.ZfsStorage.cloneVolume : Command "zfs clone -o shareiscsi=off vbox1/98ab69d8-b41e-4574-9acc-87cf12b7047b@version1 vbox1/4c21a5c6-63fe-4f3a-b4f6-09a73c223cd8" failed on host 10.1.2.168!
Jan 19 18:25:42 vdix86 Error code: 2
Jan 19 18:25:42 vdix86 Error: invalid option 'o'
Jan 19 18:25:42 vdix86 usage:
Jan 19 18:25:42 vdix86 clone [-p] <snapshot> <filesystem|volume>
Jan 19 18:25:42 vdix86 For the property list, run: zfs set|get
Jan 19 18:25:42 vdix86 For the delegated permission list, run: zfs allow|unallow
I read the zfs manual and "-o" is not a valid option for clone but I don´t know why is there.
what am I doing wrong? any ideas?
Thanks in advanced.

Hello
Are you using a supported version of Oracle? I hope it's not Oracle 7!
This is probably an installation issue, where is Data Services installed? If its Program Files (x86), try re-installing in C:\SAP or similar.
Your comment <<If I try using ODBC it cannot find the oracle drive in the system list.>> makes me wonder if the the Oracle client is not installed properly.
Michael

Advice for creating a template with cf page

I know how to make a template inDW with a html page but when
i try and use a cfm page things are going so well
Is there something I should know?
My page keep going to old link for the cfinclude parts of the
page etc
any advice most appreciated

so that should be arent going so well

Creating a Template with Fade In / Fade Out

Hi Guys,
I need to make a number of audio samples for promotion - I have a lot of audio files so I need to make a template which is 3 minutes long and has a 10 second fade in, fade out either side. How would I go about making that? I'm new to Logic so sorry if it's a dumb question.
Cheers.
M

Hi Matt,
I don't think it is a dumb question, you provided all the info needed to help you out. It is a newb question though (but they are not by definition dumb). here's what you need to do:
Open an empty project, create one stereo audio track. Hit 'A'. The track now goes to automation mode. Click in the track, it will create 'nodes' that you can drag at will. You make 1 node at the start (bar 1) of value -∞ dB, create a second node of 0.0 (or -6.0) dB at 10 seconds and at 2'50", and create node 4 at 3'00" of value -∞db again.
From the file menu, now select "Save as Template...", enter a name, done!
regards, Erik.

Creating Numbers Template with pre-made formulas

Similar Messages

Maybe you are looking for