Creating of logical port

Hi ,
I am newbie here . Now I have problem while creating a logical port
I got a error " Es fehlt die Berechtigung für diese Funktion" in German.
It means that I 'm not allowed to perform this function.
Does anybody have the similar experience ?
Thanks a lot
YANG

hi
good
go through this link
http://help.sap.com/saphelp_nw04/helpdata/en/16/285d32996b25428dc2eedf2b0eadd8/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/45/f9f02cf3e41ecce10000000a1553f7/content.htm
reward point if helpful.
thanks
mrutyun^

Similar Messages

Creating new logical ports for WSDL with several port types not working

Hi all,
I am trying to integrate some BODS webservice into the BPM. I am using CE 7.2 Kernel Version: 7.20.3710. When I am trying to assign a provider system in the application configuration I get following error:
The provider system successfully found the needed service, but its wsdl is without webservice policy. Thus the generated client configuration might not work because of different configurations between service and client (most probable a difference in the security settings). Either assign a provider system with access to wsdl with policy or manually create the client configuration.
The regarding provider system is using a communication profil where the authentication method is set to "none". Normally this configuration should work, but it isn't.
So I started to create new logical ports for each port type. But then I get the error:
Port type name of loaded WSDL does not match the port type name of the Service Reference.
I checked already the port type names in the WSDL but they are 100% the same. What I found was that the configuration is always trying to use the first port type in the WSDL. So I am not able to configure the other port types in the service group.
I also tried to do the same thing using a WSDL with just one port type and surprise it is working...
I hope somebody can help me out
Thanks in advance
Andy

Hi Andy,
Please check this Link: https://cw.sdn.sap.com/cw/docs/DOC-45012
Regards,
Naresh B

Errors by creating new logical Port

Hy experts,
i have a Problem with creating a logical port for an SAP standard Web- service.
We need to use a web- service in our Projekt.
Because this, i try to create a test-system, using webservice.
The real webservice, i have to use, is still under construction. So i use first an standard- service from SAP.
I use an ERP R3 Release 700 sp18 for the consumer, an a CRM Release 701 sp3 as the service provider.
The crm provides a service called calculator_in.
I create a Client Proxi called ZCO_CALCULATOR_IN in ERP. Then i start the Soamanager, picked the service and try to create a logical port.
new service name : zco_calculator_in
name logical port : LP_ZCO_CALCULATOR_IN
Port ist standard
1. Error:
WSDL-Zugriffseinstellungen: via http with an URL
--> SRT Framework Ausnahme. Fehler bei WSDL-Zugriff: Ausnahme in Kommunikationsframework aufgetreten:Fehler in HTTP-Framework:401Unauthorizedhttp://"<<ip-Address>>":8080/sap/bc/srt/wsdl/sdef_CALCULATOR_IN/wsdl11/ws_policy/document?s
The url works, i tried it with my explorer.
2. Error
WSDL-Zugriffseinstellungen: via local file
--> SRT Framework Ausnahme. Uninstanziertes Objekt "subject sidl service" in Methode IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D der Klasse CL_SRT_WSP_CONFIG_SIDL.
Can anyone tell me, what i can do?
Are theire 'Hinweise', that can solve the Problem?
I hope for an fast answer, because this is critical for our projekt.
Regards
Torsten

Hy experts,
know i have another error.
I create a new wsdl-file with the Soamanager in CRM and use this to create the logical port.
Error:
SXML Reader/Writer Exception
Die Abbruchart war: RABAX_STATE
Die ABAP-Aufrufhierarchie war:
Method: IF_SXMLP_FRAGMENT~SET_UNPARSED_FRAGMENT of program CL_SXMLP_FRAGMENT=============CP
Method: DOM_TO_PART of program CL_SXMLP_UTILS================CP
Method: ALTTO_FRAGMENTS of program CL_SIDL_DESERIALIZER==========CP
Method: ALTERNATIVESTO_FRAGMENTS of program CL_SIDL_DESERIALIZER==========CP
Method: DESERIALIZE_CONFIG_DEFINITION of program CL_SIDL_DESERIALIZER==========CP
Method: DESERIALIZE_WSDL11 of program CL_SIDL_DESERIALIZER==========CP
Method: IF_SIDL_DESERIALIZER~DESERIALIZE of program CL_SIDL_DESERIALIZER==========CP
The Dump is:
Error in 'CX_SXMLP'.
'CL_SXMLP_FRAGMENT=============CP'
'CL_SXMLP_FRAGMENT=============CP'
I hope for more help.
Torsten

Error creating a logical port from a WSDL in tx SOAMANAGER

I created a client proxy successfully in SE80, using a WSDL. I then run tx SOAMANAGER to create the logical port.
I type the service name, logical port name, and specify "WSDL Based Configuration". I select to load the WSDL from a file on my pc. I use the same WSDL I used to (successfully) define the client proxy. I get the error message:
SRT Framework exception: Error in WSDL parsing: Exception occurred in library handler
Any ideas?
thanks
matt

IF possible can u type in ur WSDL, it might be the WSDL def itself. Also can u tell me what u r trying to do, SOAMANAGER has been super tricky for me, try binding it with the third option if u trying to test ur service
Edited by: Gokul Muthuswamy on Apr 24, 2009 7:08 PM

How to programmatically create a logical port to consume external webservic

Hi All,
I have created a logical port in soamanager transaction manually to consume a web service.
I have a requirement where I need to create this logical port programmatically,so that i can release the proxy class
of that web service and port will be automatically get created in all systems when the user uses it for first time in each system.
It will be helpful if you provide any method or function module which can do that.
Thanks in advance..

Hello,
Creation of Logical Port using LPCONFIG is explained in this link [http://help.sap.com/saphelp_nw04/helpdata/en/16/285d32996b25428dc2eedf2b0eadd8/content.htm]. It can also be created using SOAMANAGER.
Thanks,
Venu

Error while creating logical port for Reporting

Hi,
In one of the training materials for Duet Enterprise, i saw the steps for creating logical port for the consumer proxy /IWTNG/CO_PXY_RECORDS_REPOSITO.
When i am trying to create the logical port, i am getting an error saying,
" SRT Framework exception: Error in WSDL access: Exception occurred in communication framework:Error in HTTP Framework:500 Native SSL error
https://<server:port>/_vti_bin/OBAFileReceiver.asmx?wsdl "
I would like to know is it really necessary to create this logical port for "Reporting Scenario" and is it not created automaticallly using the Installation Wizard??
And in case it has to be created, how to resolve this SRT framework exception?
~ Ramanath.

Hi,
the consumer proxy /IWTNG/CO_PXY_RECORDS_REPOSITO was used in Duet Enterprise SP01. Now with SP02 the consume proxy /IWTNG/CO_OBAFILE_RECEIVER_SOA is created.
However, the SSL error that you are getting looks a little strange (it does not mean that there is an error, but it is worth checking):
So can you go to SOAMANAGER -> Service Administration -> Single Service Configuration. In here select "Consumer Proxy" from the "Search by", Search Pattern "/IWTNG/CO_OBAFILE_RECEIVER_SOA" and Field: Both.
You should find one entry. Select it and click "Apply Selection".
Now go to the Configurations tab. Here you should see one Logical Port with name "LOGICALPORTFORREPORTING" with Creation Type "Manually Created". In fact this logical port was created by the Wizard.
Click on Display and scroll down again. Now in the "Additional Information" tab there is a string after HTTP Destination, e.g. 0050568E3F5A1ED096F22339C44BAF83.
Copy this value and go to your SAP GUI -> Transaction SM59.
Here click on Find/Search and search for this HTTP Destination. You should find one Type G RFC Destination that has the target host of your SharePoint server and the path prefix /_vti_bin/OBAFileReceiver.asmx.
Now you can test the service. Just click on Connection Test. The result should be a HTTP Response: 200.
If not, then something went wrong with the automatic configuration and we should take another look at it (for example maybe the SSL certificate from SharePoint that was imported by the Wizard is not valid)
Regards,
Holger.
PS. Don't use the "Ping Web Service" test from SOAMANGER -- unfortunately this is not working consistently.

Error while creating logical port from WSDL in SOAMANAGER

Hi,
I am trying to create a logical port for the webservice TerritoryCRMBasicDataByIDQueryResponse_In with the WSDL
http://usciq9e.wdf.sap.corp:50077/sap/bc/srt/wsdl/sdef_TERRITORYCRMBASICDATABYIDQUERY/wsdl11/ws_policy/document?sap-client=506
In SOA Manager, I selected the proxy object and clicked on 'Create Logical Port' ,
gave the name and description for the port and set it as default.
The other settings are :
Configuration type : WSDL based configuration
WSDL base is : Via HTTP Access
Then I gave the address of the WSDL in the URL and the proper username and password. When I clicked on 'Apply Settings' I get the following error:
"Error when building binding view: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL "
Please advise me on how to approach the problem.
Thanks,
Sashi

Creating logical ports is done here:
http://help.sap.com/saphelp_nwpi71/helpdata/en/44/cc8fd368c873dfe10000000a11466f/frameset.htm

Error in creating Logical Port in SOAMANAGER

Hello,
I create a consumer proxy for http://www.thomas-bayer.com/axis2/services/BLZService?wsdl. No when I am trying to create a logical port I am getting SRT Exception. I am able to open the link in IE. What shall I do to solve it?
Regards,
Ahmed

What type of SRT error you are getting? post complete message.
SRT error with unsupported xstream means service provider is returning non-xml message (HTML).
Please note I am able to get wsdl of this service but not the endpoint (HTTP return code: 500) so read documentation carefully if there is any additional requirement to access this service.
Regards,
Gourav

Unable to create logical port in SOAMANAGER

Hi All,
When Im tryign to create a logical port for my consumer proxy I get
SRT Framework exception: HTTP: Current user does not have the required authorization to access the HTTP destination.
Any clue what authrizations I need? I didnt get this error while generating the proxy from the wsdl and Im using the same userid/pwd.

Hi,
Even I get the same error.
SRT Framework exception: HTTP: Current user does not have the required authorization to access the HTTP destination
I found the note : Note 1240233 - Error when maintaining logical ports using SOAMANAGER.
Applied the note, still the same error.
Have this issue is resolved?
Any other solution?
Regards,
Sunil.

Unable to create logical port

Dear All,
I have created a web service from a function module. I have also created a proxy for the web service.
Before creating the logical port, I am also including the same port name in the endpoint of the service.
My scenario is, I am creating and consuming the web service in the same server.
While creating the logical port, the error
SRT Framework exception: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL
is coming.
Can anyone help me out with this please?
Regards,
Prosenjit.
Edited by: prosenjit chaudhuri on Apr 30, 2009 4:39 PM

Hi Prosenjit,
I have received the same error when creating a logical port. I believe that the issue may be to do with the default PI WSDL containing two <wsdl:port> definitions, one for HTTP and one for HTTPS. I saved the WSDL locally, removed the <wsdl:port> definition for HTTPS (as I am only using HTTP) and then generated the logical port successfully, without receiving the error message.
Please note that you must use the via File option, rather than via HTTP Access, as the HTTP version will still contain the two <wsdl:port> definitions.
Please also watch out for Note 1325092, which means the URL Access Path (on the Transport Settings tab) is not set correctly. If this Note applies, you may need to copy the complete URL from the WSDL into this parameter if it is not set correctly.
Hope this helps.
Cheers,
Jon

Creating logical port pointing XI Runtime

Hello Friends,
for a abap backend to point to an XI,I need to create a logical port,which is pointing to
a RFC destination of type H,to create an RFC destination of type H,i need to know the URL and service number,how do i find this information.
regards
kaushik

http://help.sap.com/saphelp_nw04/helpdata/en/22/042652488911d189490000e829fbbd/frameset.htm
RFC destination type H
http://help.sap.com/saphelp_nw04s/helpdata/en/8f/770f41218ff023e10000000a155106/frameset.htm

Error while parsing wsdl while creating logical port

Hi all,
I have a ABAP consumer proxy created. Now I want to create a logical port in SOAMANAGER.
When parsing the wsdl, the error is:
SRT Framework Ausnahme. Fehler beim WSDL-Parsen: Fehler in Base-URI: Relative URI testtt.wsdl erfordert Angabe einer absoluten Base-URI
which is in english something like:
SRT Framework exception:Error parsing WSDL: Error in Base-URI: Relative URI requires absolute base-URI
Do you have any idea? The wsdl is very simple, just one binding, no nested schemas, no reference to https site.
Thanks in advance,
Rolf
Edited by: R.M. on Dec 1, 2011 4:54 PM

Further investigation gave SAP_note 1327511 (Limiations and common problems in ABAP WSDL processing). Did not find any problems with that.
I also checked the wsdl with the report RSSIDL_DESERIALIZE_DEMO - it's ok!
BTW, the system is of Release 700-Level 25. Here's a part of the wsdl:
<?xml version="1.0" encoding="UTF-8" standalone="no"?><wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:sch="http://domain.de/b1tt/schema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="http://domain.de/b1tt/schema" targetNamespace="http://domain.de/b1tt/schema">
<wsdl:types>
    <schema xmlns="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" targetNamespace="http://domain.de/b1tt/schema">
    <element name="SendRequest">
         <complexType>
              <sequence>
                   <element name="name" type="string">
                   </element>
                   <element name="ordertype" type="string">
                   </element>
                   <element name="orderno" type="string">
                   </element>
                   <element name="workflow-id" type="string">
                   </element>
                   <element name="file" type="base64Binary">
                   </element>
                   <element minOccurs="0" name="signature-file" type="base64Binary">
                   </element>
              </sequence>
         </complexType>
    </element>
...omitted some more elements equally defined...
</schema>
</wsdl:types>
<wsdl:message name="SendRequest">
    <wsdl:part element="tns:SendRequest" name="SendRequest">
    </wsdl:part>
</wsdl:message>
...omitted some more messages equally defined ...
<wsdl:portType name="TestTT">
    <wsdl:operation name="Send">
      <wsdl:input message="tns:SendRequest" name="SendRequest">
    </wsdl:input>
      <wsdl:output message="tns:SendResponse" name="SendResponse">
    </wsdl:output>
    </wsdl:operation>
</wsdl:portType>
</wsdl:definitions>
Edited by: R.M. on Dec 2, 2011 1:41 PM

Problem while creating logical port using soamanager

Hi all,
I have created a client proxy for web service from a 3rd party system.
When i am creating a logical port for the same consumer proxy i get a error as follows:
RABAX_STATE -e: UNCAUGHT_EXCEPTION
and a dump saying
" The exception 'CX_SXMLP' was raised, but it was not caught anywhere along the call hierarchy.
Since exceptions represent error situations and this error was not adequately responded to, the running ABAP program
'CL_SXMLP_FRAGMENT=============CP' has to be terminated.
Please suggest what can be done or what can be the problem.
Thanks in advance.
Komal

Pls go to txn SM59 and check if the RFC destination for webservice is working in the test connection.
Then go to txn LPCONFIG and create the logical port using the RFC dest. Pls mention the path suffix appropriately.
Next in your code while instantiating the client proxy pass the logical port name in the constructor (if the LP is not maintained as default).
Pls reward points if the tips are helpful.

SOAMANAGER - create logical port issue

Hi,
I am trying to create web service client for http://www.webservicex.net/globalweather.asmx?wsdl .
I have done this successfully before using Java , org.apache.axis , and Eclipse .
I download the WSDL and created a proxy using the wizard with no problems:
SOAMANAGER
When I try to create the logical port :
I get this error:
Error: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL
Any idea ?
Regards.

Hi Eitan,
Please refer this link this might help you.
discussion:http://scn.sap.com/thread/1379938
Thanks,
Vidyasagar

SOAMANAGER create logical port not allowed / forbidden

Hi all,
when trying to create a logical port, the window goes blur and the mouse pointer changes to a forbidden traffic sign, and I am not allowed to do anything else than reload the page and go to frontpage of SOAMANAGER. However I can see in the backgroud the "Web Service Administrator" page.
We are in SAP BASIS 700 P0026.
I don´t find any log file entry, neither ICM trace entry regarding this. I have tryed also all kind of web browsers and information on internet did not result in any similar case.
Any help is very usefull. Thanks,
Pedro

Hi Eitan,
Please refer this link this might help you.
discussion:http://scn.sap.com/thread/1379938
Thanks,
Vidyasagar

Creating of logical port

Similar Messages

Maybe you are looking for