Creating output type for MB01,MB1B & MB1C for IDOC

Dear Exoerts,
Here scenarion is client using interface at front end.Which provides backup data from SAP.
Can anybody guide to Create output type for transactions MB01,MB1B & MB1C.It is going to use for IDOC creation.Client wants Inventory program at front end system.
Waiting for your reply.

Hi,
Please check below link in this regard. Thanking you.
http://help.sap.com/saphelp_45b/helpdata/en/52/16ac64543311d1891c0000e8322f96/frameset.htm
Edited by: Padmasri Garapati on Nov 30, 2011 3:14 PM

Similar Messages

Configuration output type for VL02N - creating output type

Dear Sapguru,
I want to configure output type for VL02N transaction for IDOC creation,Here scenario is to connect SAP to third party system in IS retail.
VL02N- Output type configuration In only return delivery case.
Can anybody guide step by step cycle configuration for output type.Looking forward for your quick reply.
Note: Output type required for IDOC,to communicate with third party system,not for print function.
Thanks.

Dear Anup,
If my understanding is correct,
This seems to be a outbound Idoc scenario where Idoc will be sent by SAP to third party for a return delivery notification.
Output type configuration steps are as follows :
1) Identify the standard output type (Application - V2, Transmission Medium - 6 ) for e.g. LAVA which is very close to your requirement.
2) Use this output type as a reference & create a copy output type of your own.
3) Use a suitable access sequence or create your own access sequence as per your requirement.
4) Assign access sequence to the output type.
5) Maintain output determination procedure (connect your output type to a suitable procedure )
6) Assign output determination procedure. (to your delivery document type)
7) Maintain required output condition records through T Code - VV21 against your newly created output type.
8) Set up the partner profiles as per your requirement (T code - WE20)
9) Check the reflection/ effects of your new output setup at the delivery document level (VL02N).
You may quickly access these settings through T codes - NACE.
Tables - TNAPR, NAST
Hope it will help you in the set up.
BR,
Anubhav

Creating output type for issuing print

hello friends
can anybody tell me the process or steps to create output type to issue print

HI.
Goto NACE transaction.
Select the application for whch you want to create the output type. For ex. select v3 for invoice.
Click on 'Output Types' button on application toolbar.
Click on 'New Entries'.
Click on Processing Routines on the left-side to enter the driver program and SAPscript/Smartform name.
Regards.
Jay

Output type WE01 to be configured for MB1C transaction

Dear All,
I want the output type WE01 to be configured for MB1C transaction output so that the spool is generated with WE01 output type. Presently it is coming with WA01 output type. Can you please help me out?
Thanks and regards,
Atanu

check and adjust your seetings in tx:
OMB5
OMB4
OMJL
OMBU

Output type WE01 to be configuared for MB1C transaction

Dear All,
I want the output type WE01 to be configured for MB1C transaction output so that the spool is generated with WE01 output type. Presently it is coming with WA01 output type. Can you please help me out?
Thanks and regards,
Atanu

Hi Dev,
Go to NACE Transaction in that select ME - Inventory managment and also maintain condition record, Procedure, output type, Acess sequence for output type (WE01) and u get automatically in GR..Moreover also select the printer determination by Plant/Storage location combination.....
Apart from Maintaining condition record as suggested in previous thread one more important activity is
In Migo screen on Header data section inside generaltab
just below Posting date feild you will find Printer Icon right hand side to that there is one check box, this must be checked either manually at the time of GR/GI creation or is preselected if the parameter NDR has been set to X (capital letter!) in your user master recordset. This is preselected if the parameter NDR has been set to X (capital letter!) in your user master record...
Moreover use MB90 for print outs for goods movement...
From sas...

How to create output type for GR,GI?

Can any one explain,How to create output type for Goods Receipt,Goods Issue.?
and How to take print out for both?

Hi, jayant in standard u have output type for picking list, delivery doc complete, theres no output type seperately for PGI or PGR
I am sure u need the help of tech guy to create the new output type for ur requirement
regards
giri

How/ where to check output type while saving sales order for confirmation

Hi All,
Could you anyone pls let me know How/ where to check output type while saving sales order for confirmation.
Present scenario : when the Sales Order is created the Order confirmation is sent irrespective of credit block of the sales order.
Requirement : Order confirmation ZA00 sent to the partner only for those Sales orders which does not have credit block and ZCLE sent to the partner if the order has credit block.
Now i want to know where exactly to check the output types "ZA00" and 'ZCLE' based on the credit block to send the confirmation to partener.
Quick help highly appreciated......
Preetham

Hi Santosh,
Thanks for the info. But here in this case I have to send the confiramation based on credit limit check. If credit limit check exceeds "ZCLE' should go as confirmation else 'ZA00' should go as confirmation.
Where can we check the credit limit whether it exceeded or not. My doubt is whether it is config issue or do we need to write code user exit or routine to send the specific output type for confirmation.
Thanks & Regards,
Preetham

Create output type for Quotes

Hi all,
I want to create new output type for quotes that will create an IDOC file at the quote level.
It will Include all of the same segments that are currently being populated for IDOCS created for ZBA4 order confirmation output type. Also it will
Include expiry date from quote header vbak.bnddt (segment E1EDK03, qualifier 006).
Include S0A Reference from quotation header text remarks (segment E1EDKT1)
How to that??
Thanks in advance.
Raj

Dear Kittu,
For your requirement needs output determination settings for the billing.
I don't think you can have Medium PDF ,you can send the PDF file Via Medium Mail.
To do the output determination proceed with this path
IMG>Sales and Distribution->Basic functions>Output control>Output determination>Output Determination Using the Condition Technique-->Maintain Output Determination for Billing Documents.
-->Maintain Condition Tables
-->Maintain Output Types
-->Maintain Access Sequences
-->Assign Output Types To Partner Functios
-->Maintain Output Determination Procedure
-->Assign Output Determination Procedures
You have to assign output program to your output type.You need develop the program such a way that to send the PDF file Via Mail.
After these settings you need to maintain the condition record with Medium Mail in VV31 transaction.
I hope this will help you,
Regards,
Murali.

Output type is not getting triggered for ship to party in shippment output

Hi,
we have maintained output determination procedure for shipments. It was working fine.
We have just added new condition table to access sequence, and maintained the condition records also for condition type ZABC. I have checked in NACE, Application V7, I am able to find the condition type. checked in VV73, condition records displayed. But in VT02N/VT03N, we are unable to get print for the output type.
Why this is happening? we are able to see the procedure, condition type, access sequence, condition records in place ...why condition type ZABC is not getting triggered in the shipment output.
Please advise and let me know if you need more details....thanks in advance.
Thanks,
SS

Hi Noel,
Thanks for your time and reply.
We have output determination procedure for shipments, condition type ZABC, Access sequence ZABC, Condition tables 550,600,650,700 already maintained. output is working fine.we have a new requirement and created new condition table 700 with the fields" Ship to party and transportation planing point "(Condition table 700 ). we assigned the condition table 700 to access sequence ZABC. Condition type ZABC already placed in Output determination procedure.
We test the output, new condition record is not triggering in the output, even in output determination analysis also, we are unable to see the record 700 for the condition type ZABC. we are not sure what is the reason for the condition table that is not picking up ? Why condition type ZABC with condition record 700 not visible in output determination analysis.
I have checked condition records, output determination procedure. Please advise and let me know you need more details.
Thanks,
SS

How to link newely created output type to newely created tcode

Hi ,
Actually i have created new output type ZONS for tcode ZMRKO
Now i want link this output type to tcode ZMRKO for my new company code.
Answer please......
Prashanth.v
Edited by: prashanth.venkategowda on Jul 26, 2010 1:14 PM

from other source

Problem in creating output type

Hi,
i want to create a separate output type for purchase order printing . I have written one driver program in development client which calls the smart form upon execution . Now i want to attach this driver program with a output type and that output type will be attached with purchase order creation . I am using tcode NACE in the config client . When i am tring to attach the driver program with the output type system giving error saying driver program does not exist since it was created in other client . Then i used tcode scc1 to copy the program from development client to config client but the problem remains same . Can anyone he

Please find the error message.
Entry ZMMDRIVER_PO_RETURN does not exist in TRDIR (check entry)
Message no. 00058
Diagnosis
Input values must be defined in Table TRDIR. The value or values 'ZMMDRIVER_PO_RETURN ' are not specified in this table.
Procedure
Check whether the input is correct and correct if necessary.
Procedure for System Administration
If this is not an incorrect entry, check the system settings and change them if necessary.
If there is a connection to the Customizing system, you can maintain the system settings by choosing Customizing in the Performance Assistant or Maintain Entries (F5) when displaying the help in a modal dialog box.

Creating Output Type

Hi Experts,
I have a requirement where I have to create an Output type based on existing one But with little different logic.
How can I do this as I am dealing with Smartforms for the first time?
Thanks
Asha

hi,
Is there an existing output type from which you can fetch the smartform details?
If yes, go ahead and copy the existing smartform and start making changes.
For smartforms, the tcode is smartforms.
First, whenever u creat a smartform , a function module is created.That function module u have to call in the ABAP program.
In ABAP program for knowing the function module name, u can use,
SSF_FUNCTION_MODULE_NAME
eg:
DATA: FM_NAME TYPE RS38L_FNAM.
     CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
       EXPORTING
         FORMNAME = 'Smartformname'
       IMPORTING
         FM_NAME = FM_NAME.
     CALL FUNCTION FM_NAME
       EXPORTING
       IMPORTING
       TABLES
       EXCEPTIONS

Output type for MB1B & MB1C-IDOC creation

Dear Expert,
I have to make output type for MB1B & MB1C transaction to create IDOC.Can anybody guide path to create Output type for same.

Hi anupmore124,
You can create a new condition type, named as "ZWA1" and you can copied this from WA01.
Once this is copied, change the following data:
1. In partner functions, include:
Medium: 6 - EDI
Funciton: (blank)
You can delete the other partner function(s), if you want that this new output message type can be handled only by EDI (for IDOCs).
2. In the "General data" tab, you need to have selected only:
Access sequence: i.e. 0003 - Trans.Type/Print Vers./Indic.
Check box active "Access to conditions"
The rest of the check box needs to be inactive.
3. In the "Default" tab, define:
Dispatch time: 1 - Send with periodically scheduled job
Transmission medium: 6 - EDI
Then, save the data and now, the IDOC can be created.
Obviously, I presume that you made your customising before in WE20 with the correct IDOC message type, etc.
I hope this help.
Kind regards,
Sandra

Output type for ORDCHG is not created in PO

Hi,
We have a problem for the output type autogeneration when a PO is changed (ORDCHG).
The scenario is the next:
- We have a Z output type for the creation of the PO. It works fine (the outputy type is generted and the idoc sent)
- We have another Z output type (ZCG3) for th PO change. The output type is not generated automatically whe you change the quantity for example. The strange thing is that if you create the output type manually and you send the idoc and later you change again the PO, now the output type is generated automatically. So it is like it is necessary a previous output type ZCG3.
Do you know where could be the problem?
We have the condition records as the other output type. Also we have marked Multiple issuing and in WE20 we have 2 entries for message ORDCHG in message control (one entry with change message flag marked and the other one without to mark).
Thank you in advance,
Manel

check the "MULTIPLE ISSUING" option in NACE.
NACE -> Select Application EF -> Click on Output types -> Select output type -> Click on Details Button -> Go to General Tab -> Select Multiple Issuing option
Regards
Vinod
Edited by: Vinod Kumar on May 3, 2010 4:43 PM

How to create an IDOC as an output type for an SAP standard transaction

Hi ,
How to create an outbound IDOC as an output type for an SAP standard transaction.
Regards,
Beena

In NACE tcode u can create output type with medium as EDI,
u can assign the entry sub routine as ENTRY_EDI in RNASTED

Creating output type for MB01,MB1B & MB1C for IDOC

Similar Messages

Maybe you are looking for