Creating pans with keyframes

New to Mac & FCE-HD v3.5. As I begin to experiment with zooms using keyframes, thanks to Tom's excellent example he generously posted on the web, I'm having difficulty with multiple motions----particularly zooming and panning. I'd like to start in the face of a woman in a photo, do a slow pullout and pan to the left at the same time, revealing her husband sitting by her side as I wind up with a medium two-shot. Anyone have some easy to follow steps to accomplish these kinds of moves in FCE-HD? thanks.

Let me refer to Tom's instructions.
They explain how to make a zoom. To add panning, after setting the scale value as in point 7. (in pg.2), you can also click and drag the frame in the canvas window to the position you like. It's important that the canvas window shows image+wireframe (as in point 2.) and its wireframe has a green dot in its center: this means you have correctly set the keyframe (as in point 4.).
You can add as many keyframes as you like to control panning and zooming. In fact at any keyframe you can set any number of motion parameters: scale (for zoom), center (for pan), but also rotation, cropping, etc. - Just experiment to see what il the best result for you.
Piero

Similar Messages

Panning with Keyframes

Hello, I've been using Soundbooth CS4 for some time, now, and I'm quite satisfied with it. There is however, one little issue I have with it.
I have an audio clip that I am applying to video that requires automated panning, however, I've been only able to find an automation option for volume. Is there any way I can pan an audio clip using automation?
Thanks to all who help.

Hi Kragnerac,
Soundbooth doesn't have support for pan keyframes for clips or tracks yet. For now, you might be able to "fudge" this by mirroring the clip in two different tracks, one panned hard left, the other hard right, then use the volume keyframes to raise the level of one and drop the volume of the other.
Durin

Query on getting the Pane with all the items for creating Views

Hi Group,
I have a query as under:
I was trying to create a sample Web Dynpro ( for ABAP ) using tcode SE80 and while creating view, I have to get the Pane with the items ( eg., Radio element, text fields, text areas, etc., kind of all UI Elements )....
But, I was not able to get while defining the View for the Web Dynpro application....
Please let me know if any setting has to be done to get this or any other clue as to get this Pane...
Thanks in advance.
Regards,
Vishnu.

hi vishnu....
make sure you have given the host and port in the local host file in c:/.
[link|help.sap.com/saphelp_erp2005/helpdata/en/43/e86de5008b4d9ae10000000a155369/content.htm ].
---regards,
alex b justin

Sequence Layers with Keyframes

Hello,
I am using After Effects with the Sapphire plugins. I am creating a slide show using 14 .tiff files. What I want to do is set up the desired effect on the first layer (with keyframes) and then copy the effects and keyframes to the other layers either before or after using the sequence layers function. I have had success copying the effects but the keyframes are still placed at the same location of the first layer. How do I get the keyframes placed correctly with their respective layers?
Thank you, WonderWendy

Simply paste the keyframes before using the Sequence Layers command. Make sure the current time indicator is positioned on the first source keyframe before pasting - that'll ensure all the pasted keyframes are positioned the same as the source.

How to zoom and pan with Edge animate?

Hi,
I have been trying to make a project with Edge Animate, it is all about an image, but I want to be able to zoom and pan the image. Can you please send me an example if there is any around? or Can you explain me how to zoom and pan with Edge Animate?
Thanks,
Guasch

I am having this same issue! I am searching through forums on what tools to use to create a good zoom and pan on an image that contains hyperlinks an other things, developed in Adobe Edge Animate.
So far, here are some solutions I have come across:
http://craigfrancis.github.io/zoomify/
http://zynga.github.io/scroller/demo/dom.html
These two seem to be the closest solutions to what I'm looking for. Now I just have to integrate the javascript into my adobe ege animate composition. Hopefully that won't be too hard. Are there any suggestions from the adobe community on how to do this?

Can't create events with times between 10:01 and 19:59

I've recently updated to OSX 10.4.9, and now can't create events with times that start with a '1'. This only seems to be a problem on the day British Summer Time begins on 25 March.
I usually create my events in the month view, and input the start and end times by clicking in the time boxes and typing in the hours and minutes. However when I try to put in a start time of, say, 11:00, it puts in 21:00 instead. The only way around this seems to be to put in a time it will accept, like 09:00, and using the arrow keys to move it to the time I want. Or creating the events in the day view and clicking on the start time there.
Any ideas?

Looks like you have found a wee bug. I can replicate it. You could report it though OS X Feedback or better though ADC, but for the latter you have to register first.
I usually create events by double-clicking in week view; often this gets the start time right, but if not then edit the start time in the info pane. Your bug is there with events created in day and week views too.
AK

Creating slideshows with FCE

Hello everybody
In this thread I'm not really seeking resolve to a problem but, more to the tune of,
" What is lacking or missing ? " , Please let me explain, For over a year now I have been creating slideshows from stills. I cant really recall the very first app I used but, I graduated to Photo to Movie before to long. PTM did a good job but, yet something was missing to satisfy my taste so. I ran out and bought FCE and, have now been creating exclusively with FCE.
Now I'm creating all my shows using PSD files coupled with motion graphics, overlays, lower thirds so forth and so on... I have create some rather impressive shows that have amazed those who have seen them to this point. Yet, I feel I have not fully satisfied my creativity.
I have googled slideshows till I'm blue in the face, seeking examples and or direction that may satisfy
my creativity. Every site I have seen that creates these shows, create them in my opinion, a very generic way....
I have yet to use any form of plug-ins, I have only been using the filters and effects in FCE, maybe that is what I'm lacking but, plug-ins really pertain to actual video , not stills ...
The direction I'm taking this thread and, the questions I have are.
What have some of you done for dressing up slideshows ?
What other apps may you have used in creating ?
What plug-ins if any have you used ?
If you know of a site that has awesome examples could you please post a link ?
Thank you all in advance for any and all help you may offer ....

_Currently I’m working on a project where 9 stills are dropped onto the screen like cards thrown across the table, each still has an independent pan._
Thats an awesome idea really, I just created a title similar to yours . I used it to introduce the family
I'm creating the slideshow for.
_Photo To Movie type apps will do anything like that._
PTM is a good app, it's really geared up for simplicity. When I first started with PTM , I bought it with the intension of importing into FCE. However, after learning how to work with stills in FCE, there really wasn't a need for PTM. If PTM was capable of adding motion graphics as backgrounds, I would have a lot more use for it. The lack of this capability forces you to export in an animation .mov , rather than .DV NTSC , this is a big drawback. Even if I wanted to use PTM just to set my stills and, add my motion, the rendering and, re-rendering in FCE just is not worth the haste.
_I have found my best slide shows are a combination of music that really fits the theme and a good Ken Burns effect. Music moves the soul._
This is very true, I have taken it a step above this and, have started adding sound effects to my transitions, not to all of them, but to a selected few. I personally feel that adding sound effect to al of them, would be to much. The hard part for me on this is , finding just the right sound effect. I need to start toying more with Garage Band and, see if I can just create the needed sounds.
_I think the main problem is one of all artists. While I am creating it, it is my best work ever. When it is viewed by other people, they are always floored. But if I watch it a day later, it looks like a piece of poo, there was always something I could have done better or a certain something was missing._
This is all very true, I face that problem with everything I have created. Seems everyone I create I learn yet another trick of the trade and saying , " This is going to be awesome, my best yet ". Completion day comes I burn to DVD, then I nit pick it to death.
I'm very artistic and creative by nature, I know I have always been my own worst critic. If one was to ask me today how I feel, about my progress in my work. I would have to say I feel I'm about 10% of where I would like to be.

Problem with keyframe effect - at start and end (crop and scale)

I'm having this odd problem with keyframe effects.
Setup:
I have a gif image that I have on video 1 for say 2 minutes.
I have my real video on video 2. It is a person talking.
First I start with my video full size on top of video 1.
Though the motion and cropping keyframe management I slowly reduce the scale and crop my video image so that it is reduced to the lower left bottom of the screen, on top of the gif, which is now revealed.
My problem is at the start and end of the transition from full video to small box on lower left on top of my gif I often get 1-2 frames where the video goes blank and/or I get a bunch of random red bars on black background appearing on the video - Or I get the gif from video 1 without the video 2 at all (it disappears).
I've tried moving my start of end of the transition to skip the bad spots - but these new transition starts or ends not get their own bad spots in the same way. Its only a couple of frames but it's really unacceptable for the finished video.
Note, when I say transition here I don't mean real transition events, but rather the start of effects that are managed with keyframes. My move from start to end of the effect runs for about 4-6 seconds.
Any ideas?

Bill,
Here is more detail and screen captures.
Concept:
I have 3 minutes of video. It contains a person making a speech. During parts of the speech I want to reveal a graphic image that will be discussed. The speech will begin with the speaker full screen. Half way in, the speaker will shrink down to 45% in the lower left corner of the screen. While the animation occurs (the shrink, move and cropping) it will reveal the graphic below. The graphic will take up the full screen with the speaker at 45%.
Technique:
I put the video in Video 2 and the graphic, a GIF image in Video 1. The scene begins with the speaker talking at full screen. After a minute, I animate the move of the speaker using Motion: Scale and Position and Effect: Crop changing Top, Bottom, Left and Right sides. The animation occurs over approximately 8 seconds.
I am manually adding keyframes at the start and end of the animation. I set the ending state of the video image in the end keyframes. The interpolation between these start and end keyframes should be managing the animation.
Problem:
At the beginning and end of the animation – usually 1-3 frames from the start and 1-3 frames from the end, where the change has barely begun or almost ended, I get these problems. On some frames, the video (in Video 2) completely disappears only showing the Video 1 GIF image below. On other frames, the video image turns black with horizontal red bands half way across.
Troublshooting:
I’ve tried deleting all start and end keyframes and moving the start and end earlier or later to see if I can fix this, but the problem continues to show up in these new locations.
I have added a few screen shots.
1:32:15 is the start of the animation change and 1:40:22 is the end of increasing from the mini video speaker to full size (on top of the GIF).
At 1:40:16 the video image completely disappears only showing the GIF below.
At 1:40:17 its back and slowly increases in size through the interpolation until it is full size at 1:40:22.
Let me know if you need anything else.
Thanks!
Evan

Creating animations with transparent backgrounds?

I'm running into some problems when using After Effects to create animations with transparent backgrounds for Keynote...
I use animated gifs and short quicktime movies with uniform backgrounds as source files, use color keying to take out the backgrounds, preview them to see if they look OK, render the results as RGB+alpha, and... they don't show up as transparent in Keynote. They work in Powerpoint, however. I've tried outputting as .mov, as .gif, as premultiplied vs straight alpha... no joy. Can someone explain (or point me to an explanation) of how Keynote differs from other programs in its handling of transparency? What am I missing?

Using a TYPE_INT_ARGB BufferedImage worked beautifully. I had played around with Image for hours, but it never occurred to me that BufferedImage would be needed. :)
many, many thanks,
Steven

Webi Stucks while trying to create report with BW7.0 (WIS 10901)

Hello,
I have some problem about using data created from BW 7.0
1. After I try to drag more than one object to create report from webi and run the query, it got sutcked and appear error as below;
A database error occured. The database error text is: The MDX query SELECT { } ON COLUMNS , HIERARCHIZE( UNION( { [0GL_ACCOUNT INT].[INT 0HIER_NODE] } , { GENERATE ( { [0GL_ACCOUNT INT].[INT 0HIER_NODE] } , { Descendants( [0GL_ACCOUNT INT].CURRENTMEMBER, [0GL_ACCOUNT INT].[LEVEL01]) } ) } ) ) DIMENSION PROPERTIES PARENT_UNIQUE_NAME ON ROWS FROM [$0ABC_C06] SAP VARIABLES [0DAT] INCLUDING 20080606 failed to execute with the error See RFC trace file or SAP system log for more details. (WIS 10901)
this error appears when I try to..
- create query with more than one object
- enable drill-down for the object and click the report to drill down
(This error appears the same in Voyager when drag objects into crosstab)
2. problems with displaying Thai language content created from BW, after I created object, thai content always appears as "######" event I change font to "tahoma", it returns the same result.
any expert could help me... thanks in advance
I use BOBJ XI 3.0, SAPBW 7.0
step:
1. Create universe connect to BW 7.0 and export universe
2. logon to infoview, choose universe to create report from webi
3. drag object and test drill down
and step for voyager
1. create voyager connection to SAP BW 7.0 use specified username and password
2. use voyager to create report
3. drag object into crosstab

Hello.
We have solved this issue. We tested our connection with MDX Parser in transaction SM59 and that resulted in errors. Then we applied SAP note 1032461 to replace an application server dll (librfc32u.dll). After this procedure, the WebIntelligence was able to run queries with more then 2 dimensions and key-figures!
Thanks for all.

How to create Delivery with sales order FM/BAPI

Hi Gurus,I'm new to SAP platform
I have created sales order ,
with this i need to create Delivery(vl01n)
so i need to give 'Shipping Point','Selection Date','SD Number'
so could any one tel me which FM/BAPI is suitable to create
Outbound delivery with 'sales order number', 'Selection date' and
"Plant or Shipping Point'.
With these Import parameters i need FM/BAPI .
Thanks in Advance
Siva Kumar kasa.

I have created delivery with that BAPI
giving 'batch number' but it was not updated,so can u tel me
any related field which need give to change batch field also.

How to create Invoice with ref to PO

Dear sd gurus..
i know we can create invoice with ref to sales order not with po
But i want to create Invoice with ref to po only
please guide me
Thanks a lot

Venu, thanks for your reply.
So in this case your idea wont work but the main imp thing is we cant create invoice with ref to po
Please read my post once again, i never said we can create customer invoice with ref to Purchase order. I said very clearly, " you can follow the normal 3rd party sales process", which means we create customer invoice with ref to sales order only.
Coming into another query,
but some time PO Is generated 110 qth to vendor but vendor may be he will send 105 due to shortage ... and he will tell i will send the the remaining stock after next 10 days now Generally miro will happen only for 105 not 110 ( even we can do MIRO110 also ) but i am talking generally because he received the stock 105 only
But company wants billing for 110 not for 105 because here customer accepted to pay full money
and vendor gave promise to delivery 5 qty in next 10 days
Why will the customer agree to be billed the full qty, when he receive the partial qty?
Let us assume as you said customer agree to pay for full qty, then there are two options.
1. Do the MIRO for full qty since you would be invoicing the customer for full qty
Or
2. Do the MIRO for partial qty and customer should agree for partial invoice
Please note in the normal case also if there is if condition then you don't have other option.
Example:
Order = 100 qty
PO = 100 qty
MIGO = 50 qty and remaining 50 qty Vendor delivery in next 10 days
MIRO =50 qty
But here also customer agreed to pay for full qty, then what will you do ? you don't have other option but to bill the partial qty in standard.
And let me know if you need any more clarity?
thanks,
Srinu.

I have a new email address. Changed this on my itunes account. On iPhone deleted old icloud account and created new with new email. I have set find my phone to on. When I download music it no longer goes to icloud an does not show up on my iphone.

I have a new email address. Changed this on my itunes account. On iPhone deleted old icloud account and created new with new email. I have set find my phone to on. When I download music from itunes it no longer goes to icloud an does not show up on my iphone.

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

Problem while Creating MVLOG with synonym in Oracle 9i:Is it an Oracle Bug?

Hi All,
I am facing a problem while Creating MVLOG with synonym in Oracle 9i but for 10G it is working fine. Is it an Oracle Bug? or i am missing something.
SQL> select * from v$version;
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE    10.2.0.1.0      Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
2 REFRESH ON DEMAND
3 WITH PRIMARY KEY
4 AS
5 SELECT name,id
6 FROM syn_t;
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
2 WITH PRIMARY KEY
3   (name)
4    INCLUDING NEW VALUES;
Materialized view log created.
SQL> select * from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
PL/SQL Release 9.2.0.6.0 - Production
CORE    9.2.0.6.0       Production
TNS for Solaris: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
REFRESH ON DEMAND
WITH PRIMARY KEY
AS
2    3    4    5 SELECT name,id
FROM syn_t;   6
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
WITH PRIMARY KEY
(name)
INCLUDING NEW VALUES; 2    3    4
CREATE MATERIALIZED VIEW LOG ON MV_t
ERROR at line 1:
ORA-12014: table 'MV_T' does not contain a primary key constraintRegards
Message was edited by:
Avinash Tripathi
null

Hi Nicloei,
Thanks for the reply. Actually i don't want any work around (Creating MVLOG on table rather than synonym is fine with me) . I just wanted to know it is actually an oracle bug or something else.
Regards
Avinash

How to create complaints with reference to ECC Billing document (CRM 7.0)

Hi experts!
I use ECC 6.0 and CRM 7.0.
I have to create CRM complaints (ZCLR - CLRP) with reference to ecc billing documents.
I read the following topics and help:
1. How to create complaints with referenceto ECC Billing document
2. Re: How can we transfer billing documents from SAP ERP to CRM 2007?
3. http://help.sap.com/saphelp_crm70/helpdata/en/46/029ba32e675c1ae10000000a1553f6/frameset.htm
Made these settings:
1. Define the Business object type
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>Define Object types for Transaction reference
2. Assign Business Object Types to Transaction Types
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>Assign Business Object Types to Transaction Types
3. Implement a BADI - CRM_COPY_BADI_EXTERN.Check Implementation CRM_COPY_BADI_BILLDO for more information on the coding for referencing the ECC Billing document.
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>BAdI: Create Complaint with Reference to External Transaction.
but still do not know,
1) if I should pre-replicate billing documents into CRM ?
2) Or, the system uses the RFC to find these documents in ECC to create reference?
Please help me.
Best regards Kostya.
Edited by: Kostya Khveshchenik on Oct 20, 2010 2:09 PM

not resolved =(
Edited by: Kostya Khveshchenik on Nov 19, 2010 8:50 AM

Creating pans with keyframes

Similar Messages

Maybe you are looking for