Creating Password galleries on a webpage

I am wondering if anyone has a link to a tutorial that will help me create a gallery on a webpage that requires a password to open the gallery. The link provided is a perfect example. The layout for the site isnt important. I kno they used flash for most of it i just need to know how to create the password part. Any links or help would be great.
http://www.religionchicago.com/photos.php

OK, first of all you need to be aware that the site you referenced does not force you to put in anything to gain access to the gallery. You can simply hit submit and leave the fields blank and the gallery will appear. You could add validation to see if the email address and phone are in a valid format, but there is no way to check if they are actually valid addresses and numbers. If you put a form like this on a page, 99% of the visitors are going to enter bogus information in order to gain access. Are you ready to deal with sorting out all of that bad data?
If you want to capture a visitors email address, you have a better chance if you simply ask them if they want to be added to your mailing list, without offering access to a restricted area if they complete the form. If you absolutely require them to enter a valid email, then you would need to have them submit the form and you would then send a verification email to them. Only once they open the email and click a link would they gain access.
In any case, you will need to write server side scripting code to accomplish any of this. What scripting languages are you experienced with?

Similar Messages

  • Bridge Help | Create web galleries and PDFs with Adobe Output Module

    This question was posted in response to the following article: http://helpx.adobe.com/bridge/using/create-web-galleries-pdfs-adobe.html

    Plug-ins that failed to load:
    It seems to me that something is wrong with your install. Maybe you did clone a former mac to install on this one? or copies old stuff to the new one. Don't know, it seems easy and quick but I prefer always a new install using a new computer or switching to a new system upgrade.
    Lightning effects shows to be 32 bit while I think to know that Photoshop CS5 and CS5.5 are both 64 bit, however Bridge was turned to 64 bit in the CS6 version but that should not mater for you to use both applications from the same install disk (or download?)
    And variations is something I tried to find in CS6 but can't find it there. I had long forgotten this feature that presented different previews and you could switch to color corrections and brightness (not sure) while looking at the result in the previews.
    So I think you have some old material residing on your system. I would advice you to back up all custom settings (actions, tools, workspaces etc. and keywords in Bridge) Then do a search for the Adobe Cleaner tool :
    http://www.adobe.com/support/contact/cscleanertool.html?promoid=GYTAU
    (don't know this links work for you but you can find it easy with google).
    Read the instructions carefully and follow this using the official uninstaller that came with PS (see application folder). Also be sure to have your serial number and AdobeID present and while an activation of PS is for the computer maybe for security first deactivate before uninstall.

  • When I want to create a pdf from a webpage I get:"cannot connect to server" why?

    when I want to create a pdf from a webpage I get:"cannot connect to server" why?

    Did you set you Preference im the right way? See
    http://help.adobe.com/en_US/acrobat/X/pro/using/WS533B928E-576F-4dc3-AA14-73D08EEE8F20.w.h tml
    the newer link leeds to https://helpx.adobe.com/acrobat/topics.html .
    You could use the German link too:
    http://help.adobe.com/de_DE/acrobat/using/WSa65464b4e07c3e0a781ee72f1298fed479c-7ffe.html
    Hans-Günter

  • Purpose: to create photo galleries to insert or not items: 1) with phocagalery, it works 2) with the transfer via lightroom, I do not see the downloaded files but if I want to create a directory folder with the same name, he said he is already, I see noth

    purpose: to create photo galleries to insert or not items:
    1) with phocagalery, it works
    2) with the transfer via lightroom, I do not see the downloaded files but if I want to create a directory folder with the same name, he said he is already, I see nothing in the media in content management
    Can you help me

    Mahsa21,
    We are glad that we were able to resolve the international calling plan issue for you.  If you need assistance,please  reach out to us.
    thanks,
    Tonya D.

  • How to create password protected folder (with unlimited storage) on Mac?

    I want to create password protected folder on my mac. I tried the method where you create a dmg file and mount it whenever you want to use the folder and unmount it when you don't. However, this method only lets me store, for example, 2 gb data. I cannot store beyong that level as an error message pops up saying... "the following files cannot be copied because there is not enough storage space in the dmg file"
    How can I create a passpord protected folder which can store as much available space that is on my mac?
    Is there an application that does that? Suggest me some names if someone already is using something like that.
    Thanks much!

    You need to choose the size of the image when you create it. If you are getting that message, you only set the image to hold 2GB of data.
    If you choose a Sparse Disk Image or a Sparse Bundle Disk Image, you can set it to any size, however, it will only be able to store up to the space available on your Hard Disk. Physically, it will only be the size of the stuff you saved into it, but It doesn't shrink automatically when you remove things.
    A Sparse Bundle differs from a Sparse Image in that it writes the contents to small files so that when Time Machine sees changes, it only backs up the small file change, not the 100 GB (or whatever) of the total image size.
    Notice that having created a 10 TB disk image (as shown above), there is only 80 GB available on the mounted image as that is all the space I have available on the 500 GB drive.

  • Creating passwords for documents

    hey iv aways wanted to know how you can create passwords for documents made in a word processing aplication such as microsft word or pages
    so that you need a password to veiw the document
    i don't know whether its possible or not but would apreciate some guidence
    thanks
    louis

    As has already been noted, your account has a password. If this isn't secure enough for you, you can look for applications that permit document passwording. Mac Office permits document level passwords. So does FileMaker Pro. Or, you could create a passworded disk image and save your private documents there - that's what I do.

  • Creating Password Protected MS WORD File

    Hi,
    i reported a program which creating password protected ms excel file using OLE2 objects in local harddisk of computer.
    can i report same program with ms word file?
    Can somebody help me pls?
    Thanks.

    Hello,
    This is what you require
      GET PROPERTY OF word 'activedocument' = actdoc .
      CREATE OBJECT word 'WORD.APPLICATION' .
      IF sy-subrc NE 0 .
        MESSAGE s000(su) WITH 'Error while creating OLE object!'.
        LEAVE PROGRAM .
      ENDIF .
      GET PROPERTY OF word 'documents' = documents.
      CALL METHOD OF documents 'Add' = newdoc.
      call method of newdoc 'Activate'.
        CALL METHOD OF actdoc 'SaveAs'
        EXPORTING
          #1 = 'C:\file.doc'          "filename
          #2 = 1                      "fileFormat
          #3 = 0                      "LockComments
          #4 = 'passopen'             "password to open a workbook
          #5 = 0                      "AddToRecentFiles
          #6 = 'passmod'.             "password for write access

  • ORA-01017 error and re-create password file? seek advices.

    I used TOAD 9.5 to log in one Oracle 10g database with sys/password as sysdba. It worked fine always. However, today I tried to log in again and come across the ORA-01017 error. Invalid username/password. Then I went to windows server command line to log in as conn / as sysdba and also log in conn sys/password@sid as sysdba, I all logged in successfully. I checked the password file is in $oracle_home\database\. I logged in as normal user successfully.
    My question is: what caused this ORA-error? how to fix it? Is it necessary for me to re-create password file to fix this? Or there is other options? Thanks.

    First though is double check make sure you have no typo when inputting username/password,
    ORA-01017 is very specific error about wrong password, if you have problem with passwordfile you would likely to get ORA-01031: insufficient privileges
    You can change your sys password using alter user statement, Oracle will sync the password file.

  • Creating Web Galleries in Aperture 3

    Does anyone know of any third party web gallery plug-ins for Aperture? The standard templates are very limiting and I need to add logos and far more information than is currently supported. Currently I am exporting the jpegs from Aperture and importing them into Lightroom to create web galleries - which seems a little long winded.
    Thanks,
    JB

    Okay, got it sorted out.
    If you look at my screen shot, by default it created a "Web Gallery", because that is what I selected originally. I believe this will be a common occurance given the fact that "web gallery" means something different now. Why the need for the change? The should have called the new "web gallery", "publish to .mac"...It will save a lot of frustration given the new default behavior.
    Going back to the "untitled project" I created as a test lets me now create a web page when I do a "new from selection".
    This is a great example of when you go and change features under a feature name, it stinks from a user perspective.
    None the less, they did nothing to improve the html templates...
    problem solved.
    Message was edited by: Macino Photo

  • Can you create web galleries in CS4?

    I noticed the feature to create a web gallery from a folder of images is no longer in the same menu dropdown. Is this feature still available in CS4? If so, where do I go to find it.
    IF NOT, is their another way to create automated web galleries?
    Thanks for your help.
    -Jason

    Yes within Bridge buried in the Workspace dialog box area.
    Bridge now does galleries similar to the way Lightroom can create web galleries.
    Lightroom does an excellent job of this.
    This is a simple html version but you can generate Flash galleries as well:
    http://web.mac.com/thomasbricker/Thomas_Bricker_Galleries/Photography/Destinations/index.h tml

  • Create password file Oracle10g RAC

    Hi all,
    we have Oracle10g R1 (64 bit) running on RAC Unix. these servers (2 servers and 2 instance) are using RMAN and the logs are transfered to DR server ( only 1 server). i dun have any idea on how to create password file with this structure, originally we want to change SYS password. and how to create password file at both RAC server and DR server, make sure the logs be transmitted without problem to DR server.
    would like to the exact procedure ...any idea?
    many thanks in advance.
    Regards,
    Nonie

    to change SYS password. and how to create password
    file at both RAC server and DR server, make sure the
    logs be transmitted without problem to DR server.
    Have not you created password file on Database and DG ? use orapwd command to create password file. Well changing password on Database side, is same simple procedure, but on DR you can change password in password file , but problem is how to change password on DR database. So only option remain is refresh DR Database !!!!

  • Create Favicon for URL Forwarding webpage

    Hi,
    Do anyone know how to Create Favicon for URL Forwarding webpage?
    I have try out several method to make it done,but failed...might need helps here!
    Thanks!

    Hi,
    Please let me know your iWS version including service pack(example:4.1sp7)and OS version. So that i can test it and let you know the feedback.
    Is there a Bug or Bug Fix in iPlanet 4.1 for URL Forwarding???
    yes is there, but related to NSAPI please check the below link.
    http://docs.iplanet.com/docs/manuals/enterprise/41/rn41sp9.html#26930
    Thanks,
    Daks.

  • How to open orapwd tool to create password file?

    Hi Guys,
    I got information as
    orapwd
    orapwd file=password_file_name password=the_secret_password
    orapwd file=password_file_name password=the_secret_password entries=n
    There is a default location and name for password files. When a password file is created, it should be created in that location.
    n specifies the maximum number of distinct DBAs and OPERs that can be stored in the password file.
    orapwd is a command line tool to create password files.
    How to open orapwd tool to create password file?
    Thanks
    Jim

    Hi
    ORAPWD is a oracle utility to craete a password file to identify users that can use the SYSDBA and SYSOPER privileges when connecting to the database.Its not a GUI utility.It is run on the cmd(in windows) abd on the terminal(in unix).
    To create the password file the command is
    orapwd file=filename  password=password entries=max_users
    You can refer to below links
    [http://download-uk.oracle.com/docs/html/A97297_01/ch1_admin.htm#sthref215]
    [http://www.oracleutilities.com/OSUtil/orapwd.html]
    HTH
    Anand

  • Creating Password File Oracle10g

    Hi there,
    i need to create password file at primary and standby db. can someone reconfirm on the steps should i do before do this?
    1. Login as oracle at primary db
    2. check remote_login_passwordfile=EXCLUSIVE
    3. cd $ORACLE_HOME
    4. orapwd file=$ORACLE_HOME/dbs/orapw$ORACLE_SID password=mypasswd entries=50 --> no need to bounce db because the parameter remote_login_passwordfile is already set to EXCLUSIVE.
    5. Login as oracle at standby db
    6. cd $ORACLE_HOME
    7. orapwd file=$ORACLE_HOME/dbs/orapw$ORACLE_SID password=mypasswd entries=50
    8. no need to restart standby db.
    is this the correct steps?
    when running this command below:
    orapwd file=$ORACLE_HOME/dbs/orapw$ORACLE_SID password=mypasswd entries=50
    is there anyway i can skip key in the password for SYS? or key in but not in clear text?
    the purpose is because we are splitting the SYS password into 2 parts, just because of security requirement.
    somebody?
    Many thanks in advance.
    Regards,
    Nonie

    Hi Harry,
    Thanks for the idea, but still in clear text. hahaha donno why so complicated on dealing with security issues, one of it is two different person holder half of whole password. seems like no other way to invisibly key in this sys password, i rather keep the whole password.
    thanks to all.. :)
    regards,
    Nonie

  • Email Setup: "Cannot create password"

    I have setup an email account for my domain in Settings/email accounts, and have received the confirmation letter.  The first time logging into webmail it is asking for me to create a password, but no matter what I put in it says "Error: Cannot create password."  Does anyone know what I might be doing wrong.

    It is your BIS account username and password that is needed.
    If you don't know it, call your mobile provider and ask them to reset your BIS BlackBerry Data Plan account so that yo can set it up new.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for