Creating PDF in DINA4 size

Hi
I am using RSTXPDFT4 program for creatinfg PDF of spool request( Form printing)
Original size of the form is INCH12.
I want PDF in DINA4 size.
Is this format conversion possible? ( I can't change original form size )

Hi
You can also use the fun module
CONVERT_ABAPSPOOLJOB_2_PDF
or the program
RSTXPDFT4
for converting the spool to PDF
After converting see the output whether it is coming to DINA4 (A4 format) or not.
Mostly it will come to that format only
Reward points for useful Answers
Regards
Anji

Similar Messages

Lotus Notes - Create .pdf and file size limits

Is there a way to increase the 100MB file size limit in Lotus Notes create .pdf option?

Good day Lisa,
Are you using Adobe Acrobat to create your PDF files or are you looking to use our CreatePDF service? If you're trying to use the CreatePDF service, I'm sorry, but we can't change the 100MB file size limit.
Kind regards,
David

Creating PDF the same size as the original

I have a TIF created in Photoshop CS2 and I'm trying to create a PDF that's the same size as the original (3 x 2 inches). What is the secret? I'm pretty sure I've done this before, but I can't figure out what to select for Paper Size to make this happen. Thanks for the help!

Try opening the TIF file in Acrobat directly. I just opened a TIFF file and it came out 2.74 X 1.00. IrfanView says the TIFF is 2.7 X 0.4. It looks like the opening added a bit of height to the file, but the right idea.

Question - create pdf with multiple size pages

Is there a way to create a pdf from a book file with multiple size pages? Frame 11

Theoretically possible by component file, but not within a single file.
See:
http://forums.adobe.com/message/4013068#4013068
http://forums.adobe.com/message/3519366#3519366
http://forums.adobe.com/thread/485331?tstart=0

Cannot create PDF w/ custom page size in FM 9

I just upgraded to the new Technical Communication Suite and cannot create a PDF from FrameMaker with a custom page size anymore. I need to create a PDF with a page size of 8.125" by 10.875", and have tried both Save As PDF and Print to the PDF driver. I followed all of the instructions on how to do so via the PDF printer driver's "Printing Preferences", Adobe PDF page size, etc. When that didn't work, I also tried Save As PDF with a custom page size ... still won't print to the custom size no matter how many places I specify it.
My only way to get my custom page size at this point is to create the PDF and then go in and modify Document > Crop Pages > Change Page Size to Custom, and specify my size. This is clearly less than desirable.
I am using FM version 9.0p 196. Any help/advice/suggestions welcome!

Cindy,
You should get the FM updates. There have been 3 patches released since the 9.0p196 version. Install them in order.
Before creating PDFs, make certain that your default printer is set to the AdobePDF printer instance. The SetPrint utility from Sundorne helps ensure that this is always the case for FM, see http://www.sundorne.com/FrameMaker/Freeware/setPrint.htm
In the Save As PDF dialogue, set the "Page Size" for the output on the Settings tab, as shown here:
Set your PDF joboptions for the appropriate press requirements.
Set your registration if required.
Make sure the "Convert CMYK Colors to RGB" is set (the PDF CMYK generation is still buggy).
Hit the "Set" button and you should get the correctly sized output.
When you were creating the ouptut via the printer route, if you had set the "Generate Acrobat Data" option, then FM sets the document so that it is always cropped to the FM page size, rather than the printer specified output sheet size, in the final PDF. Omit setting this option and it should work via this route as well.

Create pdf from html, how to adjust page size

I have a large html file that I need to convert to a pdf. I am able to open the html in acrobat and save as pdf, but I cannot find where to adjust the page size. When I save the html in acrobat, the saved file is still a single page, but when I open the page in reader, then there are page breaks.
How do I adjust the page size and create a single page document?
There is also a header and footer line that I don't want. How do I get rid of those?
LHH

When you open the window for create PDF from web, select the settings. You can adjust the size and header/footer there.

How to create a smallest file size pdf from indesign CS4 document

How to create a smallest file size pdf (suitable for upload to a website) from indesign CS4 document which contains multiple illustrator CS4 illustrations.
I have chosen the "smallest file size option" but the pdf file is over 30MB, can anyone help please.
Thank you

One trick is to
Set the placed graphics to have a transparency of 99.9% (you can do this with Find/Change and select Objects)
This is enough to force the graphics throught the Transparency Flattener
Next set the Transparency Blend Space to RGB (Edit>Transparency Blend Space)
Next set a custom Transparency Flattner Preset Edit>Transparency Flattner
Next
Use File>Export and choose
Smallest file size
PDF Compatibility Acrobat 4 (PDF 1.3)
In Advanced Section - go to transparency and selec the new Flattener Preset you created.
*this will convert your vectors to raster, but it should reduce your file size

Page size error when creating PDF from Excel 2013

Hello,
I am using Acrobat Pro XI, and am creating a PDF from Excel 2013. I have updated Acrobat to the latest version (11.0.4). I am using the Acrobat CreatePDF add-in inside Excel to convert a spreadsheet to PDF. However, when I create the PDF, the page size doubles from 8.5" x 11" to 17" x 22". I have checked the print settings inside Excel to insure that the content fits onto an 8.5" x 11" page. I also checked the Preferences->Advanced Preferences of the Create PDF add-in and confirmed that the default page size is set to 8.5" x 11". Does anyone know why it is creating the PDF with a 17" x 22" page size? Also, can the page be resized back down to 8.5" x 11" within Acrobat Pro XI?

Hello - this did not happen when I printed the file to the Adobe PDF printer. It correctly sized the sheet as 8.5" x 11". Thanks for the suggestion. Also, it will properly print out to the physical printer.
The main problem is when I am combining several PDFs into one document, I have some sheets sized at 8.5" x 11" and some at 17" x 22", so the document looks strange when viewing it online. I am still not sure why the Create PDF add-in creates a different sized PDF than the Print to PDF function.

When converting a .pptx file of 6MB to .pdf, the file size ballooned to 25MB. The original file was created on a PC. What happened? Why? How to fix? Thx.

When converting a .pptx file of 6MB to .pdf, the file size ballooned to 25MB. The original file was created on a PC. What happened? Why? How to fix? Thx.

gssharpe wrote:
What happened?
Nothing much. Different formats.
How to fix?
Try editing the original file. Resample pics to a lower resolution, check out other graphics, check table borders (eliminate any dotted lines or borders), check font usage. When generating PDF, try Save As (instead of Print > Save As), although I don't expect that'll make much difference.
Next, open the PDF in Preview, choose File > Save As, choose Format: PDF, Quartz Filterz: Reduce File Size. If that isn't enough, you can use ColorSync Utility to duplicate the Reduce File Size filter, and then edit it for a more aggressive size reduction. But keep in mind that size reduction means lower quality.

Creating PDFs - Page size

We are scanning Docs as Jpegs at 150dpi resolution. When I try to create a PDF through AA 8.01 Prof effectively an A4 image is recognised as being A3. In Windows the file property shows the image to be at 96dpi. Has anybody come across this before? If I convert the image to 150dpi through paint shop pro Adobe then picks up the correct page size!!! Is this a Microsoft issue or what?
Any advice would be very much appreciated

Aandi,
The number of pixels remain the same - Hence reducing the DPI increases the physical size when its converted to a PDF. The process is that scanned images are rotated etc... in software. We then run a create PDF program (Arts Import). Because we didn't realise that there were rogue images the resultant PDF showed pages that were bigger. This is no fault of AA its a fact of life that if the number of pixels remains the same, then differing DPIs will result in differing page sizes - Something I have learned today!!
Thanks for your help but AA is not at fault - Its the step from scanned images to making them fit for purpose before creating PDFs

Creating pdfs in a particular size

I am trying to create pdfs from PowerPoint for the production of business cards and compliments slips. I can create the right size slides in ppt but no matter how I play around with dimensions in page setup and the print menu when I come to create the pdfs they always end up being standard slide size. Am I missing something?

Hi, I've never used PowerPoint, but in most APPs you can adjust the output size, Load one of those PDFs in say Preview, when the Print Dialog comes up, choose Paper Size 3.5" * 2", or choose manage custom sizes & add that one.
Then choose Scale to fit Paper, then lower left... PDF>Save as PDF.

Create PDF from scanner - output size?

Create pdf from scanner - Starting with Adobe Acrobat Pro connected to an Epson GTS50 scanner - my pdf size is aboutt 3x5 instead of 8.5 x 11.
How can I fix this?
I have re-installed the scanner driver.
Re-installed the Adobe Acrobat Pro 9 program.
Made sure the "Config pre-sets" were 300 dpi.
Checked the Adobe PDF Properties in the Print Options.
Thanks!
Message was edited by: MelindaKochenderfer

If Letter is selected in "Configure Presets," in Acrobat 9 and you are still having problems
I would use the option to show the native scanner interface.
Select Custom Scan, click on Options next to your scanner model, select "Show Scanner's Native Interface" from the drop down menu
Press Scan, and your scanner controls should show up. From there you can see what your settings are before you scan.
If your document is 6 x 8 as an example, you could set your scanner to scale it to 8.5 x 11.

How to allow domain users to customize Adobe PDF printer page size in Printer Preferences

Hi
I am able to customize Adobe PDF printer page size in Printer Preferences in admin login but not able to customize Adobe PDF printer page size in domian users login...
can I have a solution to customize Adobe PDF printer page size in domin user login

WOW! I was amazed to see that within minutes of posting my initial thread, I tried something that works.
Apparently, the only way is will actually convert is if you select the regular Print option in the File tab. Then, change the Printer to Adobe PDF & the Paper Size to 11x17. It also worked for 36"x48" becuase I created a custom size named "Poster", so I changed the paper size to Poster & it worked!
I hope this helps someone. I searched for an existing forum on this issue off & on for MONTHS before creating this thread. If anyone has any suggestions why the Adobe PDF tab /PDF Maker wouldn't work, I'd like to know.

FAQ: Creating PDF Files from FrameMaker v.6 & earlier Documents -- Why you should not use "save as PDF"! -- Windows & MacOS Only!

An issue that has come up over and over again on several FrameMaker and Acrobat/PDF email lists as well on the corresponding Adobe User-to-User forums is that of creation of PDF files. FrameMaker 5.5.6 and 6 have what looks like a convenient feature that is supposed to allow you to create PDF files via simply saving the document as a PDF file. I have gone on record as advising end-users not to use this approach for reliable creation of PDF files from FrameMaker documents under Windows and MacOS with FrameMaker 6 and earlier. Why do I most vociferously offer this advice and why doesn't the problem get fixed? And how SHOULD you create PDF files from FrameMaker?
GOOD NEWS
I will start with the good news. The "next major version" of FrameMaker will indeed have "save as PDF" re-implemented in a manner that it will be as reliable as printing to the "Acrobat Distiller" printer instance under Windows or the "Create Adobe PDF" desktop printer under MacOS. I am personally working with the FrameMaker development organization to make sure this really happens and is fully and properly tested and debugged! Furthermore, this next major revision of FrameMaker, unlike FrameMaker 6, will come with a Distiller installer that will properly install the "Acrobat Distiller" printer instance under Windows and the "Create Adobe PDF" desktop printer on the Macintosh (of course assuring that the latest PostScript driver is also automatically and correctly installed).
DON'T USE "SAVE AS PDF"
But what's wrong with "save as PDF" as currently implemented?
The following are some of the SYMPTOMS reported over the last few years by FrameMaker users that were traced back to use of "save as PDF" under FrameMaker:
(1) No PDF file is produced at all, possibly with a log file showing not-readily apparent PostScript errors during distillation.
(2) The PDF file "loses" color in images. All or some images (raster, bitmap images, NOT vector artwork) appear in the PDF file in grayscale.
(3) The resultant PDF file is on the wrong paper size, i.e., the document's logical page size does not match the output page size as seen in Acrobat or Acrobat Reader.
(4) Some or all text in the resultant PDF file is blotchy looking or overly bold.
(5) Some or all text in the resultant PDF file cannot be searched or indexed.
(6) Some or all text in the resultant PDF file appears in Courier or in some other substitution font.
(7) Interword or intercharacter spacing is a bit irregular in the resultant PDF file.
(8) Content is missing in the margin areas of the page, i.e. you cannot do full-page bleeds.
(9) Some or all page content is missing (other than margin areas).
(10) Relatively inefficient PDF is generated.
If this list by itself isn't enough for you, please note that some of these symptoms are very subtle and may escape attention when the PDF is first viewed or printed. Oftimes, it is when one attempts to manipulate the PDF file in Acrobat or repurpose its content or even view or print on a system other than the one on which the PDF file was created, that some of these symptoms make themselves obnoxiously visible (or invisible in some cases I won't make any bad jokes here about graphic examples!).
It is important to understand that FrameMaker does NOT have its own native ability to create PDF. Any and all PDF created from FrameMaker documents is actually done by creating PostScript via the PostScript driver and having the Acrobat Distiller create PDF from that PostScript. The only exception to this is creation of PDF via the Acrobat PDFWriter driver, which is likewise not recommended (see below).
In order for "save as PDF" to work correctly, FrameMaker must do the equivalent of calling Printer Setup and selecting the "Acrobat Distiller" printer instance under Windows or the "Create Adobe PDF" desktop printer under MacOS followed by setting the driver's options correctly for paper size, page range, etc., followed by sending the proper commands to the driver to create PostScript.
Contrary to popular belief, PostScript as generated by the Windows and MacOS PostScript drivers is VERY device-dependent. The information in the PPD file associated with a printer driver instance provides critical parameters for generation of PostScript including:
Whether the printer supports color (Acrobat Distiller does)
What PostScript language level is supported (Acrobat Distiller 4.x and Acrobat Distiller 5.x are both PostScript language level 3)
Whether native TrueType support is available (Acrobat supports native TrueType as Type 42 fonts)
Available binary communications (Acrobat Distiller supports pure binary and ASCII, but NOT TCP, TBCP, or PJL)
Resident fonts (Acrobat Distiller doesn't really have resident fonts)
Available paper sizes and custom paper size availability (Acrobat Distiller supports a wide range of predefined sizes and continually variable "custom" sizes up to 200" by 200")
Margins / printable areas (for PDF and the Acrobat Distiller, there are no margins in which imaging is not permitted)
Device resolution (Acrobat Distiller can be set to any value from 72 to 4000 dpi; as a convenience, the Acrobat Distiller PPD provides a series of values for use by the driver. Since there is no inherent "resolution" of a PDF file, this parameter is used only for purposes of allowing PostScript programs that query for such a value to be satisfied and for the driver to be able to communicate this value to the operating system and/or application as required.)
Paper handling (totally irrelevant to Acrobat Distiller if input or output tray selection via "setpagedevice" is found in the PostScript stream, it is ignored by Acrobat Distiller)
Thus, if the wrong printer driver instance is selected (i.e., it isn't associated with the Acrobat Distiller PPD file) or that driver instance is improperly configured, improper PostScript will result and one or more of the symptoms described above can occur. As currently implemented, FrameMaker depending upon version will not necessarily choose the correct printer driver instance and/or correctly parameterize the print job via driver setup options. In fact, FrameMaker 5,5,6 might even try to generate PDF via calling a PCL driver, FAX driver, or even a non-PostScript inkjet printer!
DON'T USE PDFWRITER
The Acrobat PDFWriter is a relic of older versions of Acrobat. In fact, it is no longer installed by default in the "easy install" or the "typical install" of Acrobat 5. It hasn't really be updated since Acrobat 3 and only supports PDF 1.2. It is a GDI (Windows) / QuickDraw (MacOS) driver that directly generates PDF without any intermediary PostScript. Since it is not a PostScript printer driver, applications cannot pass through EPS graphics and/or PDFMark information (used for a wide variety of purposes by FrameMaker). For EPS graphics, most applications will send the low resolution TIFF (or PICT) EPS header in lieu of the PostScript text, if they send anything at all, to the driver. Forget about links, structure, or any other PDF "goodies." Expect that PDFWriter will fully "bite the dust" in the next major version of Acrobat.
SO HOW DO I GENERATE PDF FILES FROM FRAMEMAKER 6 & EARLIER?
The ONLY method that is really reliable for producing PDF files with FrameMaker 6 and earlier requires the generation of PostScript via a properly set printer driver instance associated with the Acrobat Distiller PPD and distillation of the resultant PostScript by Acrobat Distiller.
Case 1: FrameMaker and the Full Acrobat 4.05 or Acrobat 5.0x Products
PDF file from a "chapter" -- print directly to the Acrobat Distiller printer instance (Windows) or the Create Adobe PDF desktop printer (MacOS) already installed by Acrobat. If you check the "Acrobat data" option, then make sure to UNcheck the "print to file" option that gets set at the same time. As a result, the driver will automatically send the generated PostScript to the Distiller for you and delete the intermediate PostScript when done.
PDF file from a "book" -- print directly to the Acrobat Distiller printer instance with the "print to file" option checked (Windows) or the Virtual Printer desktop printer (MacOS) associated with the Distiller PPD (see details below under Case 2/MacOS). You will need to manually process the resultant PostScript file through the Distiller (or use a "watched folder" arrangement).
In both the above sub-cases, the default driver options generally will be OK, but check on paper size and communication protocol (Use pure binary, not ASCII, for optimal performance AND no CTRL-D characters under Windows. Make sure to set Level 3 only and Binary under MacOS. Font inclusion "All" for Acrobat 4.05 and "None" for Acrobat 5 under MacOS.). With Acrobat 4.05, make sure you preset the Distiller to use the joboptions you want. With Acrobat 5, you can set this on a job-by-job basis via the driver printer setup interface (or print dialog on MacOS).
Case 2: FrameMaker 6 and the Bundled Acrobat 4.05 Distiller
Windows -- Create a new printer driver instance using the latest version of the Adobe Universal PostScript Driver Installer, downloadable from Adobe's web site AND the Acrobat Distiller PPD file (located in the XTRAS subdirectory of the Distiller directory). This driver instance should be set to print to the local port named "FILE:". Name this driver instance as "Acrobat Distiller". The default driver options generally will be OK, but check on paper size and communication protocol (use pure binary, not ASCII, for optimal performance AND no CTRL-D characters). Make sure you preset the Distiller to use the joboptions you want. Print directly to this Acrobat Distiller printer instance. Make sure that the "print to file" option is checked. You will need to manually process the resultant PostScript file through the Distiller (or use a "watched folder" arrangement).
MacOS -- Install the latest version of AdobePS 8.7.x, downloadable from Adobe's web site. In FrameMaker, go to Page Setup and select the "Virtual Printer" and go to the "Virtual Printer" window pane. Select the Acrobat Distiller PPD file (located in the XTRAS subfolder of the Distiller folder). Print directly to the "Virtual Printer" (Make sure to set Level 3 only, Binary, and font inclusion "All".). Make sure you preset the Distiller to use the joboptions you want. You will need to manually process the resultant PostScript file through the Distiller (or use a "watched folder" arrangement).
Case 3: Acrobat 3
Acrobat 3 is not officially supported for the latest OS versions and I personally would no longer recommend its use for generation of PDF files given that Acrobat 5.0.5 is the current version of Acrobat.
- Dov

You're asking a lot of ancient Acrobat to work with an Office that never existed when it was made. "Just updated my office suite" is a massive change, and Window 8 didn't exist at that time either...

How to create PDF file from MX7600 scanner in Windows 8.1

I just changed to a new desktop PC that is running Windows 8.1. I downloaded the drivers from the Canon website for Windows 8.1, and I can not find the function to create a PDF file of the scanned document, like I could in Windows 7. How can I created a PDF file in the new driver software?
Solved!
Go to Solution.

Hi alove5230,
Ini addition to the drivers, you will need to download the MP Navigator software for the printer to create PDF files. Please click here to go to the Drivers and Software page for the PIXMA MX7600. Once on the initial download page for your printer, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "SOFTWARE" section and click on the MP NAVIGATOR file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Once the file is downloaded, please double-click on it to install the program on your computer.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Creating PDF in DINA4 size

Similar Messages

Maybe you are looking for