Creating phone button templates

Can someone point me in the correct direction on how to add additional phone button templates on Call Manager 4.1(3). It is not obvious to me on how to do this in looking over the AXL schema. Thanks

Hi James,
Here you go;
Cisco CallManager Administration Guide, Release 4.1(3)
Phone Button Template Configuration
From this doc;
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00803ed6f4.html
Hope this helps!
Rob

Similar Messages

CUCM 6.1 = Phone Button Template Dependencies

Does anyone have a CLI query string built for retrieving phone button template dependencies? I'd like to determine how many unused phone button templates there are, and how many phones use each template.
CUCM 6.1 (or any other version)
Thanks,
Beau

There's the query I used to identify templates with "Individual". These templates are created when you modifiy the line appearance on the device. I had 599 templates I needed to delete or change to device type templates.
admin:run sql select device.name AS Device, phonetemplate.name AS PhoneTemplate from phonetemplate LEFT JOIN device ON device.fkphonetemplate = phonetemplate.pkid WHERE phonetemplate.name like '%ndividual%' order by device.name
Example Output - the devices showing NULL are the phone templates not assigned (no dependency). While the last template is assigned to the DEVICE - SEPAABBCCDDEEFF
device                               phonetemplate
===============          ========================================
NULL                                NotAssigned-SCCP-Individual Template
NULL                                SEPFFEEDDCCBBAA-SCCP-Individual Template
SEPAABBCCDDEEFF       SEPAABBCCDDEEFF-SCCP-Individual Template

Error while updating phone button template in CUCM 8.6

Experts,
I'm getting following error while updating phone button template in CUCM 8.6;
Update failed. java.sql.SQLException: System catalog (sysprocbody) corrupted.
Please check the screen shot attached here with.
What could be the reason?
Thanks
Vivek

I'm not a Cisco employee, so I can't do anything with your backup.!
You need to take a backup as a precaution (You should have been doing this anyway) Then you need to call Cisco TAC to get the underlying problem fixed. CalManager is a locked-down environment, and only TAC can get the low-level access needed to fix database problems.
GTG

Button Templates in database not shwn in CUCM admin Phone Button Templates

Hi,
I was looking around the database of CUCM (v8.6), and i have found some gap between the 'phonetamplate' table and the "Phone Button Templates" page. Following items are not shown in the front-end:
StandardCN622
Standard_Cisco_TelePresence_400
Standard_Cisco_TelePresence_200
Standard_Cisco_TelePresence
Standard Usage Profile
Default VGC Virtual Phone Template
Is this normal behavior? Is there any explanation why?

Hi Anthony,
I think there was device pack installed (cmterm-devicepack8.5.1.14059-1.cop).
How does it explain the gap?
admin:show version active
Active Master Version: 8.6.2.23900-10
Active Version Installed Software Options:
cmterm-8961.9-1-1SR1.cop
cmterm-7937-1-4-5-7-SCCP.cop
cmterm-9951.9-1-2.cop
po-locale-de_DE-9.3.3.1000-1.cop
cmterm-7945_7965-sccp.8-3-5.cop
cmterm-9971.9-3-4-24.cop
cmterm-9971.9-0-09-2dev.cop
cmterm-dx650.10-0-2-24.cop
cmterm-8941_8945-sccp.9-3-4-17.cop
cmterm-7945_7965-sip.9-3-1SR2-1.cop
cm-locale-de_DE-8.6.2.1000-1.cop
cmterm-7945_7965-sccp.9-3-1SR1-1.cop
cmterm-7945_7965-sip.9-3-1SR1-1.cop
cmterm-9951.9-0-1SR1.cop
cmterm-9951.9-0-4.cop
cmterm-69xx-sccp.9-2-2-6.cop
cmterm-7925-sccp.1-3-4SR1.cop
cmterm-9951.9-0-1SBE-10.cop
cmterm-9971.9-3-2SR1-1.cop
cmterm-7942_7962-sccp.9-2-1.cop
cmterm-8961.9-3-1-33.cop
cmterm-7940-7960-sccp.8-1-2.cop
cmterm-9951.9-1-1SR1.cop
cmterm-8961.9-0-1SBE-10.cop
cmterm-roundtable-901-super-7.cop
cmterm-8961.9-3-4-24.cop
cmterm-9971.9-0-3.cop
cmterm-7945_7965-sccp.9-3-1SR2-1.cop
cmterm-9951.9-0-09-2dev.cop
cmterm-69xx-sccp.9-0-2-s.cop
po-locale-zh_CN-9.1.1.1000-1.cop
cmterm-8961.9-0-4.cop
cmterm-9971.9-1-2.cop
ciscocm.refresh_upgrade_v1.1.cop
cmterm-9971-repartition-all.cop
cmterm-9971-repartition-4.cop
cmterm-7945_7965-sccp.9-1-1SR1.cop
cmterm-devicepack8.5.1.14059-1.cop
cmterm-8961.9-3-2-10.cop
cmterm-9971.9-0-4.cop
cmterm-69xx-sccp.9-1-1-sr2.cop
cmterm-9971.9-2-2.cop
cmterm-9971.9-0-0-46dev.cop
cmterm-7945_7965-sccp.9-0-2SR2.cop
cmterm-9971.9-0-1SBE-10.cop
cm-locale-hu_HU-8.5.1.2100-1.cop
cmterm-8961.9-1-2.cop
cmterm-bfcp-e.8-6-2.cop

7941 Phone Button template on CCM 4.2(3)

Hello,
Has anyone got an overflow error message when trying to ad the customized 7941 phone template on CCM 4.2(3) devpack 3.3?
By default, the standard 7941 phone button template come with 1 Lone and one speed dial, but our environment here need a two-lines phone. While ny other model can have several version customized button templates but no 7941. Please kindly sugest on what I should check in order to acheive adding the 7941 phone button template.

Hello all,
I have let the TAC engineer and Developers took care over the case and they solved this issue for me already. The problem is a missing of line 2 record in standard 7941 Phonebutton SQL table. If you already have your case opened please refer the case number 604361587 to your TAC engineer so he/she can contact the one that took care over my case for the solution.

Changing phone button template on default device profile?

I have a default device profile for 7941 that is currently using a phone button template that is one line. What is the impact of changing that to two-line phone button template? Can this be done live, on the fly?

so if i change the default device profile for my 7941's, nothing will happen to the phones until they are reset?

Issue defining DN 7965 because using 7965 SD Phone button template on Cisco 7965 VoIP phones

I am having issue with assigning DN7965 to a phone device. Error message indicates that 7965 is already associated and in use. We have associated phone template 7965SD because most our phones are CISCO 7965. Is there a way to overcome this issue ?

Hello, All!
I have continued testing this in my lab and have come up with the following results.
When setting up a new device, TAPS will generate an error if the DN is already in existence across multiple devices.
If replacing a device, you must use the same model device or else TAPS will generate an error.
Unfortunately, based on the above rules, I was unable to utilize TAPS for bulk upgrade of user devices from 7960 model phones to 7965 model phones. However, I have come up with an alternate solution.
Note: This solution would only need to be used in a scenario where you do not want to assign a MAC address before physically deploying the equipment. The below solution provides the flexibility of creating the phone configurations prior to deploying the equipment without having to have all hardware specifically assigned to a user/DN.
Bulk Update Cisco Phones without MAC Addresses
Bulk Admin > Phone > Export Phones > Specific Details (Pull relevant information, DN(s), Description, Owner User ID, CSS, so on…)
Download the file, change to csv, open in Excel
Clear contents of “Device Name” field. Parse through and update other fields if needed.
Save a copy as CSV, upload to CUCM as Insert Phones > Specific Details
In CUCM, create a Phone Template for import
Bulk Admin > Phone > Insert Phones > Choose File > Choose Phone Template > **Important** Select Create Dummy MAC
Run Job
Once job is completed, all 7965 devices will be created with a BAT prefix and dummy MAC address, check Device > Phone to confirm
…When ready to activate
Device > Phone > Search by DN for BAT device
Open device, change MAC address to new 7965 hardware, check “Is Active”
Click Save.
Plug-in 7965 device to network. When the phone comes online and gets past firmware it will pull newly generated SEP config with user ext.
I hope this helps. I appreciate the communities continued assistance.

DX650 - 2 questions (Exp. modules?/Button Templates)

So it appears that either both of these are not possible or no one else knows either! Any feeback to confirm is appreciated. Thanks
I have two questions that pertain to the DX650 model SIP phone. 1st) Does anyone know whether there are expansions modules that can be used for these devices? 2nd) Is it possible to create custom button templates for these adding additional line/feature ability? I already know you can of course alter the template. I guess I'm asking if there's a way to get more line/feature space with either adding an expansion module if they exist or a custom button template. Currently we have the default standard template w/ 2 line extensions, redial feature, and then space for 12 speed dials. Much like some 79xx/89xx/99xx models, we'd like the ability for an expansion module or ability for more functions. From what documents I've read, it doesn't appear to be possible for either. Anyone know for sure? Thanks for your feedback
Message was edited by: Tommy Bull

Hi,
Regarding the expansion module support with DX650 i want to add that since there is no mention of expansion module support with DX650 in the datasheet and more importantly when we check the Phone configuration page of DX650 on callmanager administration webpage the 'Expansion Module Information' section is not there, which shows that there is no support for any KEM with DX650 at least for now. You can check with your Account team or open a case with PDI Helpdesk for any roadmap related queries for the same.
HTH
Manish

Button Template

Hi everyone,
I am trying to create a BUTTON TEMPLATE that takes BUTTON ATTRIBUTES.How can i do it.I created a button template
<table class="t10Button" cellspacing="0" cellpadding="0" border="0" summary="">
<tr>
<td class="t10L"><img src="#IMAGE_PREFIX#themes/theme_10/button_left.gif" alt="" width="4" height="24" /></td>
<td class="t10C">#LABEL#</td>
<td class="t10R"><img src="#IMAGE_PREFIX#themes/theme_10/button_right.gif" width="4" height="24" alt="" /></td>
</tr>
</table>
But i am not able to use that BUTTON ATTRIBUTE.I am not good at these TEMPLATES .Could some one help me to solve this
Thanks
phani

G'day,
Just incase you still haven't worked this one out, you will need to modify the button template and add #BUTTON_ATRIBUTES# subsitution text in what location you desire.
For example the Theme we are using uses Image Buttons and hyper links. So after locating you can modify this to be <a #BUTTON_ATTRIBUTES# href="#LINK#">.
Regards
Mark

How to create PDF Merging Template with Buttons & javascript?

I am trying to create a PDF template that has buttons that request a file or email be inserted as you progress through the document.
There will be a drop down menu that has options for different types of "customers", each type of customer will show a different set of buttons.
Each button, once clicked will prompt for a PDF document to be inserted. Each button will be labeled what it requests. For example, "Receipt", "Title", "Insurance Policy" etc. The documents will need to be merged in the order they were received via the buttons.
In the end, after all the buttons have requested the specific file, it will merge the selected files into one PDF document.
Does anyone have some insight or ideas on how to get started on this? I am sure Java script will be involved.
Thank you! Your help is appreciated!

Hi Travis ,
You are absolutely correct ,to get more accuracy ,you will certainly have to use java script to get this task done.
However if you want to add buttons ,you can do it from Acrobat.
Tools>Interactive Objects>Add Button
Please check the button properties if it reduces your work to any extent .Go through all the options and see how it goes.
Regards
Sukrit Dhingra

StandardView button is being selected in the ribbon even user clicks on Datasheet view of a library created using custom template.

Hi,
We have an issue with one of the library created using custom library template. Eventhough user selects Datasheet view from the ribbon it's showing Standard view button as selected. However content is being correctly in the grid view. Can some one help me
in sorting this issue.
NB: Functionality is working as expected with library created using OOB document library template.
In the above screen shot Datasheet was selected.but Standard View was highlighted.
Is that something should be done in schema.xml file?
Thanks,
Venugopal

Hi Venugopal Pulagam,
This seems a weird issue, based on my understanding, it is not caused by SharePoint. I haven’t seen that there is settings in list instance schema file can effect this to happen.
To narrow down this issue, would you please check whether this can be reproduced in other type of browser?
And as this only happens for this specific library, please create a new list based on the template, check the result.
How you create the list template, please share the steps to reproduce the issue.
Thanks,
Qiao Wei
TechNet Community Support

Creating or customizing a button template

Hi
Ive been trying for a while now to create a custom button template(rounded corner, darkorange background) but since i am using theme 20 these attributes are not changing and i cant change my theme. I tried created a .css but applying bg-color to button changes from 3D to 2D looks terrible with underline...any help thanks.

koloo wrote:
fac586,
Well that's one of my best sites i visit often timer plug-in is great but nothing close to Template/Theme customization...thanks.I have no idea what you're talking about.
apex.oracle.com is an APEX instance hosted by Oracle for use by the APEX community for non-commercial educational, demonstrational and experimental purposes. Most users of this forum have workspaces there as it's the best way to reproduce and share problems. This is particularly true for layout and visual formatting issues like your as it's much easier to understand these by actually seeing them rather than relying on 2nd hand descriptions. If you don't have a workspace on apex.oracle.com, then sign-up here now, then reproduce your problem there and post guest developer credentials for the workspace so we can see what you've done.

Creating PDF Merging Template with Buttons & javascript

I am trying to create a PDF template that has buttons that request a file or email be inserted as you progress through the document.
There will be a drop down menu that has options for different types of "customers", each type of customer will show a different set of buttons.
Each button, once clicked will prompt for a PDF document to be inserted. Each button will be labeled what it requests. For example, "Receipt", "Title", "Insurance Policy" etc. The documents will need to be merged in the order they were received via the buttons.
In the end, after all the buttons have requested the specific file, it will merge the selected files into one PDF document.
Does anyone have some insight or ideas on how to get started on this? I am sure Java script will be involved.
Thank you! Your help is appreciated!

Hi Travis ,
You are absolutely correct ,to get more accuracy ,you will certainly have to use java script to get this task done.
However if you want to add buttons ,you can do it from Acrobat.
Tools>Interactive Objects>Add Button
Please check the button properties if it reduces your work to any extent .Go through all the options and see how it goes.
Regards
Sukrit Dhingra

How to create custom button by amending template in sc and change po screen

Hi,
Can anybody tell the steps that How to create custom button by amending the template in shopping cart or change purchase order screen.
Full points for the answer.
Edited by: shraman saha on Aug 17, 2008 6:44 PM

Hi,
I dont have any idea what you mean by Template for "Change Purchase Order" functionality. As far as i know there is a change button on the screen using which we go to the change mode and edit the PO.
About your other query: you do not require to download any HTML pages. To see the templates for PO go through the following path:
Transaction SE80 --> Internet options --> in the drop-down enter BBP_POC (for PO) --> Topic 99 --> HTML templates.
Then look for the following templates :
SAPLBBP_PO_UI_ITS 3000 --> for header basic data
SAPLBBP_PO_UI_ITS 4000 --> for item overview
SAPLBBP_PO_UI_ITS 4100 --> for item basic data
SAPLBBP_PO_UI_ITS 2200 --> for buttons.
Make appropriate changes to the screen and then publish it before using it. It is just like activating objects.
Hope this helps.
Thanks,
Pradeep

Button template's styleClass not working

We have created our own button template in UIX, which specifies a default style and JavaScript mouse events so that the button visually changes when the user hovers the mouse over it.
This works, except that on startup, the default class that we assign to the button isn't there in the generated HTML.
The onMouseOut/onMouseOver events do work however, so we get the weird situation that our buttons look all wrong, but they look correct once the user has moved the mouse over them at least once.
Does anyone have any idea? Here's our UIT file:
<templateDefinition xmlns="http://xmlns.oracle.com/uix/ui"
xmlns:data="http://xmlns.oracle.com/uix/ui"
xmlns:ui="http://xmlns.oracle.com/uix/ui"
xmlns:html="http://www.w3.org/TR/REC-html40"
expressionLanguage="el"
targetNamespace="http://xmlns.psb.nl/osiris/templates"
localName="button">
<type base="ui:button">
<attribute name="text" javaType="string"/>
</type>
<content>
<button styleClass="UnselectedButton"
onMouseOut="this.className='UnselectedButton';"
onMouseOver="this.className='SelectedButton';">
<attributeMap>
<rootAttributeMap/>
</attributeMap>
<childMap>
<rootChildMap/>
</childMap>
</button>
</content>
</templateDefinition>

From daniel.early79 at this thread: https://discussions.apple.com/thread/4894152?start=6&tstart=6
I just experienced the same issue of my down volume button not working but the up volume button does. I messed around with the phone for a bit. I just found out that if I hold the iPhone in my right hand with my thumb on the upper right corner of the phone and apply slight pressure on the upper right corner, the down volume button worked. After doing this a couple times it started working normally again. Must be a design issue. Hope this helps!

Creating phone button templates

Similar Messages

Maybe you are looking for