Creating Planned Independent Requirements for an MRP Area.

Hi All,
I am trying to enter Planned Independent Requirements for an MRP Area, with requirement type VSE and I get the following error;
"Only stock requirements are allowed when planning at MRP area level".
I can enter at the Plant level with no problems.
Any guidance is greatly appreciated.
Kevin.

The following is the excerpt from SAP [Help|http://help.sap.com/saphelp_470/helpdata/en/81/470a58ddab11d1b55b0000e82de178/frameset.htm] I think you maintained a planning strategy in the MRP view (for the plant) which doesn't support VSE.
You can delete PIRs from an MRP area by deleting the MRP area number from the Creating Planned Independent Requirements screen and recompiling.
When you define the planning strategies and parameters in the material master, these parameters apply to the whole plant, including all the MRP areas within the plant: You cannot maintain the MRP areas separately.
The integration of the MRP area and the assignment of the MRP area in the sales order is supported only by a user exit in the sales and distribution user exit pool.
Sales orders with MRP areas are created irrespective of the availability check control group in the material master.
Customer order processing of production sales orders with the item category (account assignment Step E Single) is only maintained in the MRP area of the plant.
In Customizing and in the MRP area user exit, make sure that when transferring individual sales orders, only requirements types KE, KEK, KEKS, KET, KELV, KEV, KEVV, VSEF, and VSE are generated.
The following requirements types are valid for the MRP area: KE, KEK, KEKS, KET, KELV, KEV, KEVV, VSEF, and VSE.
You cannot plan with preliminary planning materials in the MRP area.
There is no planning strategy for the material segment of the MRP area.
The planning strategy for the material master segment of the plant is assigned to the material segment of the MRP area.
The consumption mode and the periods of adjustment are derived from the plant in the MRP area of the material master.
Only consumption customer requirements with planned independent requirements are allowed: VSF requirements with KSV and VSFB with KSV.

Similar Messages

Planned independent requirements for MTO material

how can i maintain PIRs for an item that has strategy 20 (MTO)? when i try to access MD61, sap tells me that i need a requirements type, however strategy 20 doesnt really have these,

Hi Raf,
If you are using planning strategy 20 (MTO) then directly create sales order
If u r use planning strategy 10, 11, 40 (MTS) then you can use create PIR (planned independent requirements)
Regards,
Sankaran

Planned independent requirements for reservation

Dear all,
can planned independent requirements reserve material? if can, how to reduce?
regards
Gang

Hi YMReddy,
my requirement is that I input PIR for some materials, and want those materials reserved by this PIR, since this PIR are special, can not be used by other requirement.
regards
Gang

Creating a Production Order for a MRP area

Hi All
I have activated MRP area and has created 2 MRP area's. When I create a production order, always the first MRP area is assigned in the production Order.
Please help me to understand how do we create a Production order for a particular MRP area.
Thanks
Tom

Sorry guys, the question was not correct.

Which settings are required to consume calls for stock transfers with planned independent requirements

Dear SAP PP
With strategy 10, which settings are required to consume calls for stock transfers with planned independent requirements?
Regards

Hi all,
IF other configuration is require ? How to implement this requirement?Also please explain in detail. thanks

MRP - Create Planned Orders only for Externally Procured Materials

Dear All,
We have a scenario that our client gives us the daily requirement schedule for the current month and a monthly forecast for future months so that we can plan our externally procured materials based on the forecast.
Now I only want the MRP run to create Planned Orders for HALB and FERT based on my current months daily schedule and planned orders for ROH (Externally Procured) based on the next months forecast (monthly).
I dont want the system to create planned orders for HALB and FERT from the forecast. The requirement for the ROH are however derived from the Finished Good BOM and the forecast is also given for the FERT material. I know its a long shot but is there a possibility in the system to do such a thing or a work around?

Your business case is not clear; MRP will create planned orders for inhouse produced materials, and either planned orders or purchase requisitions for external procurement.
You can choose to convert or release external procurement for a long time ahead (eventhough taht if you have proper lead times defined you can release by lead time), but convert inhouse planned orders to production orders only for next period (week, month). Actually this is common practice.
So I fail to understand your problem.

Update for Planned independent requirements MD61

Hello,
I'm doing update for Planned independent requirements, from excel file for plan, than incuding material and quantity per period, using transaction MD61. I have the next inputs:
- Reqmts plan
- Plant
- Version
- Planning horizon
- Planning period
I tried with 2 possible solution, with differents problems:
1. Batch input to MD61: Here I have the problem with go to the next page, for quantity more than the rows displayed in the table control of dynpro in MD61. it does not work with OK_CODE '=P+'and I followed differents advices of other post in SDN but anything worked.
2. Function module: BAPI_REQUIREMENTS_CHANGE and BAPI_REQUIREMENTS_CREATED, I deleted all materials for plan before the update through batch input (this works) then I can use both Function Modules. The problem in this solution is that when I have planning period: 'P' or 'K' the system saves the plan with inconsistences for variant of period or calendar (this information is managed in batch input on MD61)
Thanks for your suggestions,

Hi,
Following are the tables
PBIM                    Independent requirements for material
PBED                    Independent requirement data
PBHI                    Independent requirement history
PBIV                    Independent requirement index
PBIC                    Independent requirement index for customer req.
Regards,
Vishal

Idoc type and message type for Planned Independent Requirement (PIR)

Hi
Can anyone please give me the information on the idoc type and message type for Planned Independent Requirement(PIR)?
And also the prerequisites to use them.
Regards,
Lohitha
Moderator message: please do more research before asking, show what you have done yourself when asking.
Edited by: Thomas Zloch on May 23, 2011 10:45 AM

Hi,
You can use IDoc type WMMBID02 with message type WMMBXY.
Also please check test program RLMBXY00 to simulate IDoc WMMBID02.
Regards,
Ferry Lianto

Plan independent requirement?

hi
what is plan independent requirement and what is the link with it sales order.is it made after sales order or before sales order.please explain in detail.also please explain what is the the difference between
mrp type PD and VB.
regards
sanjay

As the name suggests ,it is independent on sales order or any other orders. It is the input to MRP. If for a material you are creating PIR in MD61 as 100 in 1 month, It means you need 100 qty of that material produced in your plant after one month. It is independent.
Then MRP will give you the procirement proposals like purchase requisitions(if externally procured materials are short of the requirement..i.e for 100 qty) and planned orders(if inhouse materuals are short of the requirement..i.e for 100 qty)...
PIRs are those which are created by you.. you can create them at any time. MRp will take care of making the necesary materials to be available for that requirement...i.e it will prompt us the dates on which the materials have to be available in the plant to meert the requirement...
PD and VB:
PDwill work with BOM structures.
Imagine the final material A , and its component B
you need 2 pieces of B to produce 1 piece of A.If you work with PD and you receive for example a sales order for A of 10 pieces , the MRP with PD will determinate that you need 20 pieces of B taken into account the sales order delivery date.
The system will use the BOM to know the quantity that you need. You will not have additional stock for the component B. The system will procure when and how many pieces you need.
IF with the same example you work with VB for component B, then you have to define a reorder point (example 5).
If your stock is bellow that level ,the system will procure to get again the reorder point level. If you have enough stock (example 30) the system will not create any purchase requisiton for B, independent of the sales orders of A , and the reservation of 20 pieces.
When yuo work with expensive components you should use PD , because you don´t have stock without pegged requirements.
if the materials are cheap and you need to have allways some stock , you can define VB as planning type.
karthick

Planned Independent Requirement Not getting displayed in MD04

Hi,
I am assigning material to nwa and doing advance procurement by using procurement type PIR. Reservation is getting created after release of activity but the same is not getting displayed in MD04.
The items of the reservation are getting displayed in MB23.
what could be the reason for this?
Regards,
B P Singh

Hi,
Planned Independent requirements (PI) are normally configured for consumption by 'Dependent' requirements. Hence the PIR would have been replaced by the reservation from 'dependent' requirement. You can test and verify the same in development system.
Regards
Murali

Report showing independent requirements for several materials

Hi
Workiing in SAP 4.7
Looking for a report where I can see independent requirements over time, for several materials, based on a time characteristic such as month/week. So for example I want to see the independent requirements for 10 different materials in a list, with the time characteristic on the horizontal axis.
Is there any such report? I am NOT asking for MD05/MD06/MD61/MD62.
Thanks in advance,
Lars
Edited by: Lars Tornblom on Apr 27, 2011 10:09 AM

Check in MD73
if you are using requirement plan then check based on requirement plan else check based on MRP controller by giving period

Query related to RM maintained for two MRP areas.

Hi PP Gurus,
The scenario is we modeled two Storage location MRP Areas say 1001 and 2001. There are two FG getting manufactured at them, say FG-1 at 1001 and FG-2 at 2001. Say there are three RMs viz. RM-1, RM-2, and RM-3. RM-1 and RM-2 included in FG-1 BOM and RM-3 and RM-2 in FG-2 BOM. Means RM-2 is common in both MRP areas.
Now I've extended FG-1 and FG-2 for respected MRP areas. RM-1 extended to MRP area 1001, and in MRP views of material master, Production storage location and Storage location for EP is maintained as 1001. Same is maintained for RM-3 except MRP area as 1001, it's 2001.
The concern is about RM-2, though I extended RM-2 for both MRP areas i.e. 1001 and 2001 but I can maintain Production storage location and Storage location for EP either as 1001 or 2001. So whenever I'm taking MRP run, for RM-2 it's either proposing 1001 or 2001 as Storage location for withdrawl or EP.
My requirement is when I run MRP for FG-1 system should show me Sloc for RM-2 as 1001 and in case of FG-2 as 2001.
As a try I tried to remove Production and Issue Sloc from MRP views and maintained Issue Sloc/Receive Sloc in PV of FG-1 and FG-2 but still unable to get the requirement fulfil.
Please make prompt comments
Thanks & Regards,
Abu Arbab

Dear ALL
my requirement is exactly same as above that i need my component to be issued from different slocs depending on diffreent MRP areas in which they are being planned.
But in my case FG is same and is being planned in 2 different MRP areas. So my BOM is same in both cases.
For eaxmple--2000 is MRP area 1 and 3000 is MRP area 2
Requirement is components should be issued from 2000 when panned in 2000 and from 3000 when planned in FG is planned in 3000.
Kindly let me know what settings are required at components level to do this
thanks

Any Prerequisite for adding MRP Area?

Hi Gurus,
I need to add MRP area data to a large number of materials. I tried testing for some material . For some materials I am able to add the data. For other I am not able to add.
Is there any prerequisite for adding MRP area to a material?
Can some suggest any BAPI to add/ update MRP area for a material?
I am basically a ABAPer and don't have much Idea about MRP area. Please suggest any link where I can learn overview about MRP area.
Thanks in Advance,
KG

hi,
the prerequisities for MRP area are
1> ACTIVATE MRP AREA
2> DEFINE MRP AREAS.u will find the settings under the menu path:
SPRO > IMG > MATERIAL MANAGEMENT > CONSUMPTION BASED PLANNING > MASTER DATA > MRP AREAS
or u can find it under the menu path:
SPRO > IMG > PRODUCTION > MATERIAL REQUIREMENT PLANNING > MASTER DATA > MRP AREAS.
regards
jash
Edited by: diptasya jash on Apr 30, 2009 11:35 AM

ATP against planned independent requirements

I have set up materials that are linked to planning materials using strategy group 63. I have tested setting the planning material consumption to a 2 for forwards/backwards and 3 for forward only. I have set up planned independent requirements by week.
When I book a sales order it gives me a material availability date that is in the week prior to the availability of the material based on planning. For example I have 100 parts available for week 30 which starts on July 21 yet my sales order shows a material availability date of 7/16 and a goods issue date of 7/18. How can I ship the goods if they are not available yet. Any ideas on what could be wrong??
Many thanks for any and all help!!
Debbie

Hi YMReddy,
my requirement is that I input PIR for some materials, and want those materials reserved by this PIR, since this PIR are special, can not be used by other requirement.
regards
Gang

Planned Independent Requirements Data Conversion

Hi, I am currently trying to figure out what data I need for converting Planned Independent Requirements from Oracle 11i to SAP. Can someone explain to me what equates to a PIR in SAP from Oracle?
Thanks in Advance,
Brian

Hi YMReddy,
my requirement is that I input PIR for some materials, and want those materials reserved by this PIR, since this PIR are special, can not be used by other requirement.
regards
Gang

Creating Planned Independent Requirements for an MRP Area.

Similar Messages

Maybe you are looking for