Creating Planning Layout for GP12N  - Posting Period as columns/rows

I am trying to create new layouts for GP12N, but do not know how to create the integrated layout with one column or one row for each Posting Period 1 - 12.  I did read that 'Sets' were not allowed.  Can anyone provide the steps necessary to allow Posting Periods as columns or rows?

Hi,
   a) Remove period from general data selection.
   b) Create 12 columns of the same Key Figure which use the characteristic period and set it as a fixed value

Similar Messages

  • Planning Layout -KP66 with dynamic period column

    Dear experts,
    I would like to create a planning layout for cost center/ cost elements in which we have the different periods in the columns .The periods in the columns should dynamically select according to the planning cycle selected in the excel file.
    Planning Cycle                           Start Period                                End Period                Total Months
    JAN                                         JAN                                           JUN                            6
    FEB                                         FEB                                            JUN                            5
    MAR                                       MAR                                            JUN                           4
    According to planning cycle my period column should change dynamically.Please let us know how to create planning layout with dynamic period columns. I donot want to create the planning layout with 12 period columns to upload the data.
    Thanks & Regards
    Kumar

    NOT ANSWERED

  • Planning Layout for Activity Rate

    Hi
    My Client is a German Company. Controlling Area currency is EURO, It has operations in India also.
    For India, required to create BDC for Activity rate planning.
    1. Is it necessary to create separate Planning Layout for INR currency?..I did not find any currency in standard layout.
    2. Please explain how it works. whether it takes Cost Center currency or Controlling Area currency?
    Regards
    Pradeep Veer
    Edited by: Pradeep Veer on Feb 9, 2011 7:13 AM

    Hi,
    The standard setting for the leading currency plans the transaction currency for costs and the controlling area currency for prices. This is the Standard design. Please review 100379 & 183556 for further information on this.
    Please pay attention to the following section of note 100379:
    'Note: you can only change these settings in the following  Transactions: KP97 (as of Release 3.1I) and KP98 (as of Release
    4.6), as well as CP97 and CP98 (as of Release 4.6C). However, you  should only carry this out after you have taken Note 183556 into  account.'
    regards
    Waman

  • Planning Layout for Statistical Key

    Hello. Good Morning.
    Does anybody know how to enter the field Transaction Currency as a variable in a planning layout for Statistical Key?
    Please kindly answer me.
    Thank you very much.
    Best Regards,
    Antonio

    I try again as you said, it's ok. But I don't know why I can't do like before. Could you help me find the reason. Below lists all the data needed.
    Gen. data selection:
    Field Name          | Values
    Fiscal Year            Variable entry
    Period                   Variable entry From To
    Company Code      Variable entry
    Version                  Variable entry
    Statistical Key Fig. Variable entry
    data entry columns:
    Profit Center | Description | Quantity | Unit |
    Thanks in advance.
    Alex
    Edited by: Alexandro Miao on Jun 2, 2008 10:12 PM
    Edited by: Alexandro Miao on Jun 2, 2008 10:13 PM

  • Planning Layout for WBS Elements

    Any one have any idea how to set up the planning layout for WBS ELEMENTS & COST CENTER?
    We are trying to plan for WBS elements and Cost center through CJR2 but I don't have any layout designed for this.
    Any ideas or suggestions?

    I doubt if you can have a single layout for planning both at Cost Centre and WBS level.
    But you can create your own layout by copying the standard planning layout under a different name and then change the copy (T code OPO1)
    We in our project created a layout with WBS Element (PSPGR) and Cost Element (KAGRU) as Characteristic Values with lead column structure 'Characteristic value and name'.
    You then create/assign a Planner Profile>Planning Area>Planning layout using T Code KP34.
    Call/change your planner profile (T code KP04) to above before doing the cost planning in CJR2.
    Regards
    Sreenivas

  • Planning Layout for WBS

    Any one have any idea how to set up the planning layout for WBS ELEMENTS,COST CENTER,?
    We are trying to plan for WBS elements and Cost center through CJR2 but I dont have any layout designed for this.
    Any ideas or suggestions?

    I doubt if you can have a single layout for planning both at Cost Centre and WBS level.
    But you can create your own layout by copying the standard planning layout under a different name and then change the copy (T code OPO1)
    We in our project created a layout with WBS Element (PSPGR) and Cost Element (KAGRU) as Characteristic Values with lead column structure 'Characteristic value and name'.
    You then create/assign a Planner Profile>Planning Area>Planning layout using T Code KP34.
    Call/change your planner profile (T code KP04) to above before doing the cost planning in CJR2.
    Regards
    Sreenivas

  • Error while running a query-Input for variable 'Posting Period is invalid

    Hi All,
    NOTE: This error is only cropping up when I input 12 in the posting period variable selection. If I put in any other value from 1-11 I am not getting any errors. Any ideas why this might be happening?
    I am getting the following error when I try and run a query - "Input for variable 'Posting Period (Single entry, mandatory)' is invalid" - On further clicking on this error the message displayed is as follows -
    Diagnosis
    Variable Posting Period (Single Value Entry, Mandatory) is used as a lower limit (X) and an upper limit () in an interval selection. This limit has the value #.
    System Response
    Procedure
    Enter a different value for variable Posting Period (Single Value Entry, Mandatory). If the value of the other limit is determined by another variable, you can change its value also.
    Procedure for System Administration

    OK.
    Well, if the variable is not used in any interval selection, then I would say "something happened to it".
    I would make a copy of the query and run it to check if I get the same problem with period 12.
       -> If not, something is wrong in the original query (you can proceed as below, if changes to original are permitted).
    If so, then try removing the variable completely from the query and hardcode restriction to 12.
       -> If problem still persists, I would have to do some thinking.
    If problem is gone, then add the variable again. Check.
       -> If problem is back, then the variable "is sick". Only quick thing to do, is to build an identical variable and use that one.
    If problem also happens with the new variable, then it's time to share this experience with someone else and consider raising an OSS.
    Good luck!
    Jacob
    P.S: what fisc year variant are you using?
    Edited by: Jacob Jansen on Jan 25, 2010 8:36 PM

  • Error that "specify a value for variable posting period (single value entry

    hi
    My query is running testing fine in RSECADMIN under some username..but when i try and open it using analyzer (under same username) it gives me error that "specify a value for variable posting period (single value entry, mandatry)" it does'nt even asks to enter variable values and gives this error message.
    However the same query appears to be working fine under different username.
    plz advise.

    Hi Abhinav,
    Just do one thing compare the Roles of two different users for which Query is getting executed and not.
    Check the Object S_RFC.
    Compare the Objects detail for Both the Users.
    Please Assign points if useful.
    Regards,
    Rajdeep.

  • Stock Report for selected posting period!

    Dear All,
    Is there any standard program on Stock Report for selected posting period, which shows PRODUCT| UNITS| OPE.STOCK| PURCHASE| SALES| CLO.STOCK|
    I want report on this, anybody can help me out on the same. Or is there any standard report.
    Need urgently.
    Thanks & regards,
    Abhay.

    Hi Abhay
    There is no standard report available as format given by you.
    You have to develop a Z Program for the same. We have also developed
    the same requirement.
    Regards
    Harish

  • SAP Exit for Current Posting Period

    H All,
       I am executing a query and it should always take the Current Fiscal Year & Current period into consideration. I don't see any Standard SAP exit which is provided for this. There is an SAP exit for Fiscal year/Period but I need both of them seperately.   Can anyone please provide a sample code for "Current posting period".
    Points will be assigned!
    Thanks a lot!

    Hi Sia
    Here is some cmod code that might help:
    These should be run in i-step = 1
    DATA: l_period        TYPE t009b-poper,
              l_txt4(4)      TYPE c.
    *Variable ZCCCFYEAR that defauts to current Fiscal Year
            WHEN 'ZCCCFYEAR'.
              l_txt4 = syst-datum(4).
              l_period = syst-datum+4(2).
    *Handles FiscVarnt, period 6 is end of year so period 7 is new year
              IF l_period > '06'.
                l_txt4 = l_txt4 + 1.
              ENDIF.
              l_s_range-low = l_txt4 .
              l_s_range-high = ''.
              l_s_range-sign = 'I'.
              l_s_range-opt = 'EQ'.
              APPEND l_s_range TO e_t_range.
    *Variable ZCCPPER that defauts to current Posting Period
    Code adds 6 to current year period to be inline with Fiscal Year Variant (ie.per1 = july(7)),
            WHEN 'ZCCPPER'.
              l_period = syst-datum+4(2) + 6.
              IF l_period > 12.
                l_period = l_period - 12.
              ENDIF.
              l_s_range-low = l_period.
              l_s_range-high = ''.
              l_s_range-sign = 'I'.
              l_s_range-opt = 'EQ'.
              APPEND l_s_range TO e_t_range.
    Hope this helps
    Josh

  • How to create a layout for  tcode fbl1n

    hi..
    i  want to know how to create a layout for flbl1n.pls provide me a step by step approach.
    regards

    Hi,
               Its simple :
              1. Display Report FBL1n.
              2. Select/ deselect coloumns you want with button ' Change Layout ( Ctrl + F8 ) '.
              3. Click Save Layout button( Ctrl + F12 ). Give a new name for layout.
    Regards
    Srikanth M

  • What is the best way to create the layout for a single page website in Adobe Muse?

    I was wondering the best way to create the layout for a single page website in Adobe Muse. Does anyone have any suggestions?

    I know how to create a website but will that help me create a single page website? Below I will leave a demo of what I want. I want it to only have one page but multiple sections. What is the easiest way to create a single page website like the demo below?
    Demo Website

  • How to implemented Planning Layout for other plan

    Hi,
    I have one planning layout for X plant now I want to use same layout for anothr plant. Can I copy the same layout for another plant...? If yes pleast let me know the step with tr.code.
    In this senario what I have to copy Planning area, Level or layout...?
    Your help will be highly appreciated. I will assign full mark.
    Regards
    Manoj

    Hello,
    Why don't use restrict your layout by a variable based on the plant? This variable could for instance be put on the planning level.
    Then just add this variable in your planning application via UPSPM.
    The variable can be an authorization variable, exit variable, user specific variable...
    Rgds,

  • Can MRP only create planned orders for ROH, not for FERT?

    HI all,
    Is there any way to only generate planned orders for raw materials after MRP, forbid creating planned orders for FERT?
    We want create planned orders for FERTs manually.
    Thanks,
    Harvey

    Harvey,
    Yes, that was also my understanding of your scenario. Did you try X0 for Fert?  Run MRP against the entire plant, and MRP will not create any new planned orders for the X0 parts.  It will explode the BOM and create dependent requirements in the components.  In addition, you can create FERT planned orders manually, or using an external planning system, and these manually created orders will also create dependent demand on your components.
    If you are also using Sales orders to consume your PIR, you will also have to look at requirements determination for Sales orders.  This is configured based on MRP type.  If you change existing MRP types, you may have to add SD config so as to continue to pass requirements to MRP.  Your SD resource should be able to help you through this, or I can give you basic instructions if you decide that the PIR/demand/planned order/dependent requirements works to your satisfaction.
    Rgds,
    DB49

  • Create User-Defined Planning Layouts for Detailed Planning

    Dear All
    I would like to change layout of Tcode CJR2.
    I must copy planning layout "1-702" because I would like see:
    sender cost center definition
    sender activity type definition
    alloc. cost definition.
    what do I do?
    Thanks
    salvo50

    Eli
    I know what is already there. I would like to change layout of Tcode CJR2. I must add 3 following columns (display only) to those already there:
    1. sender Cost Center Description LTEXT (new column - display only)
    2. sender Activity Type Description LTEXT (new column - display only)
    3. sender Cost Element Description LTEXT (new column - display only)
    So my layout will appear:
    sender Cost Center KOSTL
    sender Cost Center Description LTEXT (new column - display only)
    sender Activity Type LSTAR
    sender Activity Type Description LTEXT (new column - display only)
    total quantity MEG
    sender Cost Element KSTAR
    sender Cost Element Description LTEXT (new column - display only)
    Is it possible ?
    thanks
    Salvo50

Maybe you are looking for

  • Time Machine & Hard Drive Spinup Question

    For years I've used a manual, whole-disk backup--usually once a week. I backup all personal files daily. I've used Dantz Retrospect, Synchronize X Pro and now I use MimMac. All have functioned well. I'm considering switching to Time Machine for my ba

  • How to create pdf from a word doc that can be edited then turned into a form?

    I am very new to Acrobat so try to be kind when responding with tech talk.   I would like to make a template for property inspection complete with pictures, text and drop down lists.   I would like it to be editable (add my pictures and notes and a d

  • Controlfile error

    SQL*Plus: Release 10.2.0.1.0 - Production on Sun Jul 24 02:49:39 2011 Copyright (c) 1982, 2005, Oracle. All rights reserved. hi i dont have any back up of control file how can i recover from this SQL> connect / as sysdba Connected. SQL> startup nomou

  • Using firefox how do you setup a email account and or a webpage for viewing offline?

    on my previous computer I was able to check my emails offline and I would like to be able to do the same on my current computer. It was already set that way, I can't remember now if it was through Firefox or Internet Explorer. according to Help & Sup

  • Page deploy errors

    I used the eclipse to develop JSF Applicaion.And the server is tomcat the page source <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <%@ taglib uri="http://java.sun.com/jsf/co