Creating Policy-GRC 10.1

Hi gurus,
I am trying to create a Policy in SAP GRC PC 10.1 and I got this message: "Creating text AE0595f872021ee3b6f1405a9b105/LONG_TEXT failed". Do you have any idea of what can be happening?
Thanks,
Kind regards,

Thank you so much Karina!!!!
It looks kike you are a GRC PC Gurus. Could you please check the following link with another problem I am facing with GRC PC?Error when Planning Manual Control
Thanks,
Kind regards,

Similar Messages

All CX traffic dropped on data plane with error message 'Unable to create policy params (policy-params-failed)

Problems with CX dropping all traffic - error message: Unable to create policy params (policy-params-failed) seen when issuing cli cmd show opdata framedrop on CX.
Data hits ASA Service Policy and is redirected to CX, but no traffic is passed (user experience is timeout in browser).
Problem started after SW upgrade - present running versions:
ASA version: 9.1.5(21)
CX version: 9.3.3.1 (13)
Have tried to disable all policies and create a 'permit any any' policy, which at present is the only activve policy - still same problem.
Any suggestions?

If i am using 11G andrtp is 11g but on rtp side if they configure SSL, is it mandatory to do it from our side also?No it not mandatory to enable SSL at your end however you have to configure identity and trsut at your end.
Any update on my regular question(The main forum question)?You mentioned that you are posting message from 10g to 11g and as per log you are sending it to URL - https://dev-nog.server:443/b2b/transportServlet
So few things which I see as a problem are-
1. You should use URL https://hostname:soa_server_ssl_port/b2b/httpReceiver instead of https://dev-nog.server:443/b2b/transportServlet
2. SOA server SSL port should be enabled (SSL should be enabled on SOA server)
3. You should configure wallet at 10g side to contain trust cert of 11g server
Regards,
Anuj

Problem With OAM10g URL while Creating Policy

we are trying to protect a resource in OAM 10g for this we have created policy in that resource tab. we are not getting the URL which we mentioned in Host Identifier. Instead of the URL mentioned in Host Identifier we are getting the following URL.
our URL is appearing ---- dc%3d%testdc%2d%com...
Edited by: Arii on Aug 24, 2012 8:15 AM

URL prefix appearing under resource tab, is not because of Host identifiers. It is because of configuration you done during Policy Manager setup (after installing Policy Manager). During configuration, it asks for policy domain URI prefix and by default its value is /
Refer your installation and verify.

Create Policy Resource Exception. Resource type must not be null

OAM version: 11.1.1.5
I have installed OAM 11g webgate but not able to register it from OAM admin console. It is throwing the error "Create Policy Resource Exception. Resource type must not be null" whenever I try to register the agent.
Also I don't see any resource types like Http,Tokenservice and wl_Authen in Resource Type link of OAM Admin console.
How to add these missing resource types in OAM 11g?
Thanks in Advance

Hi
I didn't find solution for this issue. As I got this error in my VM machine, I reverted my snapshot to "After installing WLS" and then I installed and configured OAM again. This time I didn't get the issue.
Good Luck.

Unable to create Policy packages - missing snapin

Product: Novell Small Business Suite 6 SP5 installed, ZFD sp3 installed.
When attempting to create policy packages I get the following message:
"There is not a snap-in to create this type of object. If you proceed and
use the generic object creator, the resultin object may not be useable."
This happens with Console One on the workstation as well as on the server.
Can anyone help? Any suggestions how to resolve this will be greatly
appreciated.
R Prakash

> You seem to be missing the ZEN snapins, see:
> http://support.novell.com/cgi-bin/se...?/10061441.htm
>
> - Anders Gustafsson, Engineer, CNE6, ASE
> NSC Volunteer Sysop (http://support-forums.novell.com)
> Pedago, The Aaland Islands (N60 E20)
> Using VA 4.52 build 277 (32-bit) on Windows 2000 build 2195
>
Ran the update and its worked OK. Thank you for your help - it is greatly
appreciated.
Ratan

Problem with Edit option for a role created in GRC 10.0

Hello Experts,
I created a role in GRC 10.0 , I see my newly created role in the list of roles . If I want to Edit the role I select the row and click " OPEN" and edit the role.
But when I click the role directly and enter the role , the "EDIT" button is disabled and even maintain authorization button is disabled.
Did SAP defined in such a way that we should selct the role and click OPEN then only we can Edit or is this a Bug??
Please let me know if any one of you faced the same problem.
Regards,
Jagadish Bhandaru

Hi,
Sabita is correct.
Here is the link to the documentation
SAP Access Control 10.0
Simon

Unable to create Policy Definitions in CM 4.1.1c

I'm trying to create a Policy Definition and assign it to an Application I created, but I when I click Submit an error pops up stating:
Transaction not completed. Policy entry cannot be updated as there is no policy entry of type Other. Please create a policy of type Other or update the type of this policy to Other.
I want this Policy to be type Basic, not Other, and there is a type Other - which I'm not choosing. So why is this error popping up? I first tried this using version 4.1.1d, but it failed so I downgraded to 4.1.1c and it still fails.
I've attached a Word document with a few screen shots showing the error, and the fact that there is a type Other, even though I don't want to use it.
Am I doing this wrong or have I stumbled on a bug?

Hello,
Read "Create Download Page for Embedded PL/SQL Gateway" section in following documentation.
http://docs.oracle.com/cd/E14373_01/appdev.32/e13363/up_dn_files.htm#CIHDDJGF
<li> The first option is to modify the PL/SQL function WWV_FLOW_EPG_INCLUDE_MOD_LOCAL to include the PL/SQL download_my_file procedure and then recompile
<li> The second, described below, is to create a page in the application that has a before header branch to the PL/SQL download_my_file procedure. You then create a hidden item on that page for the document ID of the document to be downloaded.
I like and have used second option because, you can re-use apex specific features like Authorization schemes etc.
Please note that if you want to invoke custom procedures via URL, then you should allow them at web-server level. Above documentation explains this for EPG.
Regards,
Hari

Pop up warning when creating policy domain in OAM 10g

Has anyone seen below pop up warning when creating a policy domain in OAM 10g Policy manager?
Warning:
This policy domain controls the access to the URI you are currently accessing
/access/oblix/apps/policyservcenter/bin/policyservcenter.cgi
Are you sure you want to commit these changes?

Hi,
Does Note 842378.1 look like a match for you? Maybe the obcompounddata attribute is missing for some odd reason.
Regards,
Colin

Error creating policy with context

When I try to create a policy:
BEGIN
ctx_ddl.create_policy('sdoscan.ec_prd_prditmname','sdoscan.ec_prd_summ.prditmname','','','','','','','','','','CTXSYS.DEFAULT_STOPLIST','');
COMMIT;
END;
I get this error:
ORA-20000: ConText error:
DRG-10503: Unknown message id 10503
ORA-06512: at "CTXSYS.DRUE", line 180
ORA-06512: at "CTXSYS.CTX_DDL", line 1348
ORA-06512: at line 2
Does anyone know what this means and / or how to fix it?

You could as well use this sample code
#include <stdio.h>
#include <stdlib.h>
#include <malloc.h>
#include <d2fctx.h> /* Forms API context */
#include <d2ffmd.h> /* Form module header file */
int main (int argc, char *argv[])
     d2fctxa ctx_attr;
     d2fctx *ctx;
     d2ffmd *form;
     d2fcnv *pd2fcnv;
     d2fgra *pd2fgra;
     text *form_name;
     /* Check arguments */
     if ( argc != 2 )
          fprintf(stderr, "USAGE: %s <filename>\n", argv[0]);
          exit(1);
     /* Create Forms API context */
     ctx_attr.mask_d2fctxa = (ub4)0;
     if ( d2fctxcr_Create(&ctx, &ctx_attr) != D2FS_SUCCESS )
          fprintf(stderr, "Error creating Forms API context\n");
          exit(1);
     /* Load the form module into memory */
     if ( d2ffmdld_Load(ctx, &form,(text*) argv[1]) != D2FS_SUCCESS )
          fprintf(stderr, "Failed to load form module: %s\n", argv[1]);
          exit(1);
     /* Get the name of the form module */
     if ( d2ffmdg_name(ctx, form, &form_name) != D2FS_SUCCESS )
          fprintf(stderr, "Error getting the name of the form module\n");
     else
          /* Print the name of the form, then free it */
          printf ("The name of the form is %s\n", form_name);
          free(form_name);
     if ( d2ffmdsv_Save(ctx, form, (text *)argv[1])
     != D2FS_SUCCESS )
     fprintf(stderr, "Could not save the form\n");
     /* Destroy the in-memory form */
     if ( d2ffmdde_Destroy(ctx, form) != D2FS_SUCCESS )
     fprintf(stderr, "Error destroying form module\n");
     /* Close the API and destroy context */
     d2fctxde_Destroy(ctx);
     return 0;

Creating policy file

I have a problem displaying images in my applets. I am using SDK 1.4. I have run the policytool programme as explained in the the java tutorials.
But my problem is that when I try a code like:
import javax.swing.*;
public class MyApplet extends JApplet
ImageIcon icon;
JPanel panel;
public void init()
icon = new ImageIcon("myimagefile.jpg");
button.add(icon);
panel.add(button);
getContentPane().add(panel);
I don't see the image eventhough the applet comes up.
What am I doing wrong. Could anybody help me.

Check it out...
http://java.sun.com/docs/books/tutorial/uiswing/start/swingApplet.html
Justin.

Recipient is not receiving the policy SAP GRC 10 PC

Hello,
We have created policy and assigned recipient for policy,when we sent
for aproval,approver is sending back the policy to rework with additional
comments,but the policy is not coming back to recipients inbox.
we have maintained recipient user id and mail id correctly.
Any input to resolve this issue
Thanks
GRC Admin

Dear GRC Admin,
Its a standard error. Please validate your re-work agent in workflow and set it up as work item or workflow initiator.
Error will be resolved
-Rahul Nair

Could not create new policy

Hi, i am using Access manager version 7 but I could not create policy for my new realm via the /amserver web console. The 'New Policy' and 'New Referral' buttons are always disabled. There is information message at the top "A referral policy with referred resources must be created to this realm in order to create policies in this realm". Any idea on how to add new policy ?
Thanks.
badrul.

You have to create a referral policy from a higher level realm, ie the top level realm to this realm first.

Create user in SAP GRC AC 5.3 for each module (RAR, CUP, SPM, ERM).

Hello,
I have a doubt.
The users of the modules of the SAP GRC AC 5.3 have to created in the UME of the EP Core, is that right?? And thet add the roles of each user for each module (RAR, CUP, SPM, ERM), is that right?
Best Regards.
Pablo Mortera.

Hi Pablo,
To access GRC AC 5.3 you can create one UME user and assign different roles related to four GRC component.
Or you can create different GRC user and assign respective components roles.
The example of GRC Admin role are.
AEADMIN
READMIN
VIRSA_CC_ADMINISTRATOR
regards,
Sudip,

Error 500 is displayed when trying to create an RNA detection policy

When I attempt to create an RNA detection policy, I receive the following error message on the web interface of my Sourcefire 3D System:
Error 500: Internal Server Error

If you install a FireSIGHT license on a 3D System running software version 4.10, it may display an Error 500 message, because a FireSIGHT license is incompatible with software version 4.10.x. In order to install a FireSIGHT license, you appliance must be running software version 5.0 or greater.
In order to fix this Error 500 message when attempting to create an RNA detection policy, please follow the steps below:
Step 1: Log into the web interface of the Defense Center, and navigate to Operations > System Settings > License.
Step 2: Look for an unknown license type (FireSIGHT) as the following figure:
Step 3: Delete this unknown license type using the trashcan icon labeled Delete User-added image.
Step 4: Activate RNA and or RUA feature licenses, Operations > System Settings > License > Add New License, from your product activation keys.
Note: If you do not have RNA/RUA activation keys, please contact your Sales Representatives.
Step 5: Once activated, you should be able to see a valid license type under the License page as displayed in the figure below.
Step 6: You may now create an RNA detection policy from Policy & Response > RNA > Detection Policy > Create Policy page without any error.

Com.sun.identity.policy.NoPermissionException, when try to create a Policy

I am trying to create a policy using the Identity Server's API, using amadmin user which is supposed to have all the access privilledges.
policyManager.addPolicy(newPolicy);
I can create the policy using the same user using the console navigation, but not through the API and PolicyManager.addPolicy method
The following exception:
com.sun.identity.policy.NoPermissionException: Unable to create policy MyPolicy.rule1in organization dc=wysdom,dc=com
at com.sun.identity.policy.PolicyManager.addPolicy(PolicyManager.java:568)
at com.sun.identity.policy.Policy.store(Policy.java:831)

shirleymck wrote:
Where can I find an example of how to create a URL for a file that is in the same directory with the applet without hard-coding it?This page from the Swing tutorial is relevant:
http://java.sun.com/docs/books/tutorial/uiswing/components/applet.html#images
The linked code used method getParameter to get values from the HTML page, so that they are not hard-coded into the applet. It used getResourceAsStream to read from a URL, but you can also use the Class method getResource to get a URL.

Creating Policy-GRC 10.1

Similar Messages

Maybe you are looking for