Creating Portal in CRM
Hello All,
Is it possible to create a portal in CRM for individual users which integrates the information taken from the company database and the internet.
The information that we are looking to have in the portal is mentioned below
1) News Feeds [obtained from the internet]
2)Product Literature [obtained from the company website]
3)Profiles of candidates & Team Members [obtained from the intranet] &
4)Forum [to discuss company topics]
Thanks in advance
Hi Sunitha,
I think that this kind of message will come because of the timeout property in the backend system(CRM).Try to figure out the timeout property in backend and increase the same.
Regards,
Vinoth.M
Similar Messages
-
External access to Portal and CRM B2B
Hi,
We have the sap portal and also CRM Java ..we have deployed the CRM Business package on the portal and used the portal IView to call the CRM java application. What is the best way to expose both the portal and CRM java to the external users?
I know we can achieve this using sap webdisatcher, but there are certain limitation in sap webdispatcher when dealing with two separte host name..so please let me know how expose both portal and crm to the external users.
ThanksFirst of all you need to have your network infrastructure in terms of Security Zones, SAP has a standard recommendation that I have always use when possible for growing your landscape and exposing your Solutions to either internal or external users:
http://help.sap.com/saphelp_nw70/helpdata/en/9d/44d7bc73ddce4f96f09de874350e78/content.htm
Depending on your security needs you can have 2 portals 1 external facing portal and one internal facing portal, or just 1 portal installed in the Inner DMZ , there is no formula is what your Architects prefer and there are pros and cons in any scenario.
Now answering your question you do not need to expose both instances (CRM and Portal) you only need to expose SAP Portal because the purpose of Portal is to provide a single point of access to your u201Cbackendu201D solutions in your case. So Sap Web Dispatcher will be good choice or you can use a Hardware Load Balancing, if this is for external users then you need HA.
Hope this helps.
Juan Jose Alvarado -
Error while creating Campaign in CRM
Hi all,
When I am trying to create Campaign in CRM, system is throwing an error saying that "Can not get RFC destination for SEM".
We are not using SEM in our project.
Can anybody suggest me how to avoid/rectify this error?
points will be guaranteed.
Thanks in advance.
Regards,
Rahul.Hi Rahul,
As long your are not activate/ use the key figure planning or budget,
you can use without SEM. There is setting in SPRO to set this.
Also in your CRM Campaign, you do not use scenario planning.
Hope this helps,
Gun. -
How do I create portal groups dynamically?
Has anyone written code to use the
WWSEC_APP_GROUP_MGR.CREATE_GROUP procedure to create portal
groups programmatically? I understand alot of what I'm supposed
to pass, but some of these parameters are pretty obscure and
obfuscated.
I'm not sure this can be called like a normal (non-htp) stored
procedure at all. I now understand nearly all of the
parameters. Looking at the page source behind the Create Groups
page, I see that many of these parameters are involved in the
page generation itself, for example p_back_url being a variable
that is probably attached to the action of "Previous" buttons
that appear as you go through the process of creating a group.
Here is my call:
wwsec_app_group_mgr.create_group(p_groupname => 'X',
p_description => 'TEST GROUP',
p_db_role => 'DBA',
p_hide_group => 'N',
p_styleid => 6,
p_group_id => y,
p_siteid => 0,
p_site_id => 1);
where "y" is the nextval of the group sequence.
Inserting SQLERRM into a table, I end up with this:
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "SYS.OWA_UTIL", line 323
ORA-06512: at "SYS.HTP", line 860
ORA-06512: at "SYS.HTP", line 975
ORA-06512: at "SYS.HTP", line 993
ORA-06512: at "PORTAL30.WWUTL_HTP", line 25
ORA-06512: at "PORTAL30.WWERR_API_ERROR_UI", line 182
ORA-06512: at "PORTAL30.WWSEC_APP_GROUP_MGR", line 2891
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "PORTAL30.WWSEC_APP_GROUP_MGR", line 255
ORA-01403: no data found
I know that this procedure is responsible for generating the
subsequent pages in the "create group" wizard. There's just no
possible way to figure out how to use this procedure
dynamically. I repeat we WILL NOT BE TYPING IN OVER 3500 GROUPS
and 7000 USERS USING THE WIZARD. There must be a way.
I don't want to just arbitrarily insert groups into tables
behind the scenes without knowing what I'm doing. If this is as
simple as inserting a row into wwsec_group$, wwsec_member$,
etc., then great, but there's no way of knowing.
Maybe an Oracle person can help me. Is there another API I can
use, or is there a way to use this API as a stored procedure
where I can just loop through a driving table to create a bunch
of users and groups?
I appreciate any help. I need to create over 3000 groups based
on my client's organization. We REFUSE to do this by hand using
portal's interface. Not that it's bad, it is just impractical
in this instance.
Adrian KlingelNever mind.
-
Creating consumers in CRM and R/3
Hi,
We are currently looking at mapping Consumers from CRM to R/3 and vice versa. We would like to be able to create consumers in CRM which replicate into R/3 and also create consumers in R/3 which replicate to CRM. However we understand that in R/3 only one 'Consumer' account group can exist. As default in R/3 the consumer account group is 0170. Is it true that the R/3 account group 0170 is classed as a consumer because the 'Consumer' checkbox is ticked?
We thought the following would work but it doesn't so any tips would be great.
In R/3 we have created a new account group Z170 which is a copy of
account group 0170.
In R/3 transaction PIDE we have mapped the following:
CRM > R/3: Classification: E = Consumer:Person to the R/3 account group
0170.
R/3 > CRM: Mapped the account group Z170 to Classification E=
Consumer:Person with external number range assigned.
We then go into R/3 to create a new BP in transaction XD01, we seelct
the account group Z170 but we noticed the screen fields does not
say 'Person'. Also after creating this BP we check in CRM that it has
been replicated, it has been replicated but the BP has been created
with roles 'Sold to Party' etc and not maintained in role 'Consumer'.
We have mapped the R/3 account group Z170 to classification E so we
assume it will be replicated into CRM as a consumer.
CheersHi,
The key thing is we would like to create Consumers:Person in CRM and in R/3 and these must be replicated back into R/3 and CRM respectively.
Has anyone ever had to create Consumers:Persons in CRM and R/3? if so any help would be much appreciated. We understand that only one consumer accountr group can exists in R/3 so we wanted to know how we could go about this issue. We would like an internal number range for both CRM and R/3 when creating consumers.
Thanks
Cheers -
Creating portal desktop for the user
Hi All-
Please help me out...
1) Could you let me know the detailed procedure ( if possible please provide screen shots) to create "Portal Desktop for the user".
2)Suppose we developed a webDynpro Application and we need to make it Role Based access....please let me how to achieve this..
3)Help me out in creation of "Roles" in Portal Content Development and the steps to assign pages to "Roles"
Regards,
CrisHi Cris,
Follow these links for the required info.
Creating Portal Desktop for specific user
Portal Branding for specific user
Creating Roles & worksets
http://help.sap.com/saphelp_nw04/helpdata/en/4f/bceaffeb8c114ebef8255b63079c7c/frameset.htm
Integrating webdynpro in portal
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/2fffe990-0201-0010-aab0-e61c3250bcf3
Hope I am helpful.
Cheers,
Santhosh -
How to create portal user and integrate with external appl login
How to create portal user and integrate the user with external application for single sign-on ?
I want to access my external application thru portal user ..?
ShyamHi Jithin,
The link that you've shared talks about a different scenario.
In my case, I want to pass the portal user id when the user clicks on the Help Link present in the header area.
I am trying to pass it along with the Help Link Url property of a masthead iview but it is not getting passed to the target Url.
I would like to know if it is possible to pass the Portal User Id in this way or not.
Though if we create a appintegrator iview and pass the user id <User.UserID> along with the target Url, it reaches there.
Thanks & Regards,
Anurag -
Steps to create Iobjetcs in CRM Service
Hi guys,
Could anyone tell me what steps I need to follow to create Iobjects in CRM 4.0?
Can you point me to any good documentation?
The documentation I found so far was not useful.
Cheers
MartinHi Bhargava,
An individual object is an individual piece of data that identifies uniquely an object. For instance, a serial number for a monitor identifies a monitor uniquely. In this example the monitor is just a product (or material) and the serial number is the iobject. Ibjects are useful, for instance, when you need to send an engineer to a place to replace an equipment. You just give the engineer this number and he knows exactly what he needs to fix.
Hope this helps.
Reward with points if it is helpful -
Create order on CRM from ISA without ITS
Hi!
I must create Purchase orders from ISA to CRM. I study 2 ways:
1: call RFC on CRM to ISA, get data from isa, create order on CRM;
2: create javascript on isa for send data to crm and create order.
in both ways, i don't know which function module to use.
is there a way for trace both system and take correct function modules?
i don't have ITS!!
I hope to explain well.
best regards!
AleHello Ale,
if the ISA and the CRM System are running on two different machines you can use Ethereal to captuere the Network traffic and find out what function module is used. Also the Application Log in the CRM Server (Transaction ST01) can be usefull.
Regards
Gregor -
Create portal user using web dynpro abap application
Dear All,
I would like to know is it possible to create portal user-id through web dynpro abap application.
My requirement is
> I have to create a web dynpro abap application. In the web dynpro abap application I have name email-id and phone number as entry fields.
> I will click on submit, one unique id will get created. This unique id will be the login id for portal.
I found how to create portal user using web dynpro java, but i could not find regarding web dynpro abap.
If it is possible to create the portal users using web dynpro abap pls share the code as well.
Regards,
Swapnil IndulkarHi swapnil,
I think by using BAPi.. BAPI_USER_CREATE1 you can create.
Please check this...
Create portal user from webdynpro abap
Creating user and assigning a group through code
user administration su01
How can i get the portal user id from logon ticket in the webdyn 4 ABAP
Cheers,
Kris.
Edited by: kissnas on May 21, 2011 8:47 AM -
Create Reconnection from CRM Web-IC for Utility
Hi Experts,
We have set up an Interaction Center for Utilities. If a utility customer calls the center for reconnection/ disconnection of his meter request, then the IC Agent logs in with a business role assigned to him, identifies and confirms an account.
We can't create a disconnection document in CRM itself. We would perhaps need to use a Transaction Launcher.
However, is there a standard way of creating Reconnections from CRM Web-IC?
Thanks
AvikHi,
If we want to create disconnection/reconnection from crm web UI than we can use transaction launcher, otherwise we have to proceed in isu to create disconnection/reconnection document and order.
Because we do not have any such process in CRM to complete the process of disconnection/reconnection.
Or else you can create a notification from CRM than further processing can tak place in ISU.
Regards,
Ripunjay. -
How to Create Portal Service in Portal 7.3
Dear Experts,
how to create the Portal Service in Portal 7.3, as we create in Portal 7.0 by creating the Portal Project in that we create Portal Service and we can start and stop in Portal Service configuration in System Administration
Thanks,
Sagar PandeHi Sagar,
Procedure
1. Open the SAP NetWeaver Administrator by either of the following methods:
a. Use the URL to your AS Java (hostname:port) to access the AS Java home page and use the link to SAP NetWeaver Administrator.
b. Alternatively, add nwa to the AS Java URL to access SAP NetWeaver Administrator directly. (hostname:port/nwa).
2 Go to Operations Management Systems and click the Start & Stop link.
The Start & Stop: Java EE Instances window opens.
3 Click the Java EE Application bar and select the relevant application in the Application List.
The Portal Services pane displays the services associated with the selected application.
4 Use the buttons Start Service or Stop Service.
Refer to Portal 7.3 help
http://help.sap.com/saphelp_nw73/helpdata/en/f6/ac978061ac4b24a87a1f821313c4fe/frameset.htm
Br,
Venky -
Creating Portal Books and Pages dynamically
How do i create Portal Books Dynamically from a backingfile (preRender Method). And still be able to dynamically embed a portlet instance on each page created.
very urgrentHello,
You would want t use the methods available on the BookDefinitionManager and PageDefinitionManager EJBs to add a new book or page definition. then use the methods from the IPageInstanceManager and IBookInstanceManager interfaces implemented by the PortalCustomizationManager EJB to add the book / page under an existing book / page / desktop.
For the javadoc for all of these EJBs, see:
http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/javadoc/com/bea/netuix/application/manager/persistence/package-summary.html
Then, to access the EJB in your code, you can do the following (this example is for PageDefinitionManager, but it would be similar to all the other EJBs):
import com.bea.netuix.application.manager.persistence.PageDefinitionManagerHome;
import com.bea.netuix.application.manager.IPageDefinitionManager;
import com.bea.p13n.management.ApplicationHelper;
import com.bea.netuix.application.manager.CustomizationContext;
import javax.naming.InitialContext;
import javax.rmi.PortableRemoteObject;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
// Access the PageDefinitionManager EJB
InitialContext context = new InitialContext();
String lookupName = PageDefinitionManagerHome.LOOKUP_NAME;
String applicationName = ApplicationHelper.getVersionedAppName();
if((applicationName != null) && (applicationName.length() > 0))
lookupName = applicationName + "." + lookupName;
Object home = context.lookup(lookupName);
home = PortableRemoteObject.narrow(home, PageDefinitionManagerHome.class)
IPageDefinitionManager pageManager = ((PageDefinitionManagerHome)home).create();
Kevin -
BAPI for creating product in CRM
Hi all,
i am looking for a BAPI to create a product in CRM.
can anyone help me?Hi Neelima,
To create product in CRM (commpr01) i use this function:
CRMXIF_PRODUCT_MATERIAL_SAVE
I hope this help you.
Regards,
Mon. -
WLCS 3.5 - Creating portals not using GUI tools
are there any docs that describe how to create portals not using the GUI,
ie, what data gets added and where so that we could automate the creation of
a portal if we wanted to?
thanks
Filip
~
Namaste - I bow to the divine in you
~
Filip Hanik
Software Architect
[email protected]
www.filip.netare there any docs that describe how to create portals not using the GUI,
ie, what data gets added and where so that we could automate the creation of
a portal if we wanted to?
thanks
Filip
~
Namaste - I bow to the divine in you
~
Filip Hanik
Software Architect
[email protected]
www.filip.net
Maybe you are looking for
-
Hi, Can anybody with following code. I am converting program to unicode and getting an error 'Null space must be a data type C N D T'. Here is the code. DATA NULL_SPACE(2) TYPE x VALUE '0020'. TRANSLATE BDCDATA-FVAL USING NULL_SPACE. Reg
-
Editing Multiple Audio Clips From Premiere in Audition
Hi there, I am working with video/audio in Premiere that has frequent cuts (although the audio is derived from two files) and I need to edit all the audio files at once, rather than one by one, in Audition. I was hoping to this by nesting the audio i
-
hi, is there any way i can have dates on a X-axis for a graph on horizontal orientation ? it seems that i can only have it in vertical many thanks
-
SunOS 5.8 $ rman target / Recovery Manager: Release 9.2.0.6.0 - 64bit Production Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved. connected to target database: MLQA (DBID=1439070802) RMAN> run { 2> shutdown immediate; 3> startup mou
-
I have an ABAP program that runs multiple SALV reports using CL_SALV_TABLE. I copied GUI STATUS: SALV_TABLE_STANDARD to program and assign it to CL_SALV_TABLE. I modified the GUI status to have buttons for each report. I am trying to disable the butt