Creating presets for new features?

I can't seem to set Process Version using a preset. I'm sure I've tried other new features too, but can't remember what wouldn't work right now.
Am I doing something wrong, or are v6 presets not complete?

Ok, I tried it, created a Camera Calibration preset with the 2010 process and a vivid profile. When I applied it to an image set to the 2003 process and Adobe standard profile, the vivid profile applied but not the 2010 process. So there does appear to be a bug, or the intent was not to carry forth process in a preset. The exclamation point icon in the lower right area of the image provides a convenient means to update to 2010, but I have not been able to do it with a preset.
Richard Southworth

Similar Messages

Do we get to have our "Apple Configurator" updated for new features on iOS6?

I was wondering, if we get to have "Apple Configurator" would be updated for new features added on iOS6 devices.
Does anybody have any iead about that?
Eddie

Forgotten security questions - https://discussions.apple.com/message/18402551
More involved forgotten question issues - https://discussions.apple.com/thread/3961813

To create req for new BOM component

hello all,
i confirm the order and now i need to add one more component to the header material for the same order.
how can i create requirement for new BOM component.
what i done is i 1st cancel the confirmation. then go for read PP mater data. after that should i run the MRP for header material to create planned order for new BOM component?
regards

Dear,
If you have execute any transaction like GI confirmation then read PP master data will not work.
Best way you can cancel the confirmation and reveres the good issue by 262 movement type. Then do TECO to the order all reservation get deleted.
Then update the BOM with new component and run MRP with planning mode-3 delete and recreated. It will create planned order then convert it to production and go ahead.
Regards,
R.Brahmankar

Popup for new features of an own developed ABAP

Hi,
from time to time new features are integrated into existing ABAPs and I want to inform the users of these ABAPs about the new features.
I would like to have a general mechanism where a screen with some documentation pops up when the user runs the ABAP for the first time after the new features have been implemented (perhaps with a check box to indicate that he has read the message).
I do not want to implement everything from scratch but my investigations in 4.6C have not revealed anything useful. I know there were some applications which brought up a popup screen when used for the first time.
Thanks for your help.
Rabanus

Hi Rabanus,
Are you talking about including this functionality into your custom programs?
Are you going to maintain the documentation for the new ABAP code yourself in some table/standard text and pop up it up for the users when they execute the code? What you can do is -
1. Create a table with the key as User and Program Name and Sequence Number
2. The non key field would be a checkbox field.
3. Whenever a new functionality is added, you would create a standard text with the name as a concatenation of the Program Name and Sequence Number
4. When a user executes the program, the AT SELECTION SCREEN event would first check for all Standard text(s) which contain the program name and then check the above table with combination of the user id and program name
5. If no entry exists, then all the standard text - texts are read and displayed, as the user clicks the enter button to proceed on any -you would create an entry in the above table with the user name, program name, sequence number (read from standard text name) and mark the checkbox as 'X' indicating the documentation has been read once by the user
6. This way you can track the same and also if you want to have the user re-see the documentation, a system administrator can uncheck the checkbox in the table through a table maintenance.
I dont think this solution is too complicated to implement. You can use the class CL_GUI_TEXTEDIT to show the documentation in the pop up.
Lemme know how it works out if at all you attempt to try this.
Regards,
Aditya

Instructions for new features in 5.0 don't work on Mac.

The instructions for using new features in Firefox 5.0 do not work on Mac, which is most likely your largest user considering Mac users can't use IE. Contol-clicking on a tab does not result in a menu with "pin tab" or any similar wording. It is not possible to drag one tab icon on top of another to create tab groups. Those are the only two changes I've tried. Do these features not work on Mac? If they do, how do those of us who are intelligent enough to use the superior computer find instructions?

Your point that the support is manned by volunteers and not the company producing the software is the problem. I have a little time right now, but I teach 15 credit hours of college writing courses during the academic term, which means I work 14 to 18 hours a day seven days a week. I do not have time to search through endless posts to seek answers to basic functionality questions. The companies that produce software should be responsible for explaining how it works, and they should do so in non-technical terms unless they want me to impose my expertise on them and demand perfect grammar on their sites. But then, corporate America is not held responsible for anything these days. Frequent, needless software updates that limit rather than enhance functionality are quickly turning me into a neo-Luddite.

How to create presets for Keyframes in Adobe Premire Pro CC?

Dear Users,
I´m working on a Clip with more than one Video inside. I want to have one video in the back and the other Video on the right lower side (Picture in Picture).
Sometimes the right one should move to full screen and after a few seconds it should go back to the lower right again. This action
will be repeat many times in the complet movie, so I have to create keyframes for the movement (right to full screen / full screen to lower right).
All the time I have to copy the needed Keyframes and have to paste them on the new direction, but this needs many time.
So my question: Is it possible to make presets for the keyframe actions? Means, if I reach a position where I need the action
"right to full screen" I have to klick only one Preset Button and the keyframes will be added at this position!
Hope there is a possibility.
Best regards and sorry for my bad english!

Hello,
You can try the following work around with composition:-
1) Add a you tube video to the page.
2) Drag the video to the target of composition widget.
3) Resize the video to have the size of the target.
The triggers can have the images related to the videos so as to act as thumbnails for videos.
Regards,
Neha

Is there a roadmap for Edge Animate for new features and releases in the future?

where can i found a roadmap for the next releases of Edge animate and new features?

Hi tsiky64,
I think you might need to check the screen shot attached: Tech specs | Adobe Reader XI
To download other version of Reader you may visit : Acrobat-Reader Enterprise Toolkit Home
Regards,
Ajlan Huda.

Request for new feature: Login to Flickr account

I have a request for a new feature for ATV2 in the next sw update. I am hoping Apple will read this.. Please enable ATV2 to login to our Flickr accounts. The way it is, we can't see certain contacts' pictures as their profiles are set to public.
And please find a solution to never ending "Loading XXXX's Library" screen. Loading a library on the same wifi network (both for files on Mac or Airport's USB Harddrive) takes forever.
Thanks

I have an ATV2 and it was logged in fine--I had to restore a few minutes ago because it lost it's connection with iTunes Match, and now I can't log in any more. This is TERRIBLE as I HAVE to keep my photos on Flickr private, but want to have them playing on the AppleTV at home for me, friends, and parties.
Why did this go away?!?!

Suggestions for new features & improvements to LCCS/ICS service

Firstly Hello, I am James from Influxis. if you got a suggestion for a possible improvements or new features to LCCS/ICS feel free to add your suggestions below and we look into it.
Thanks,
James

Hi James,
With the offering from Adobe, it was possible to have a free account with $15/month of service offered.
It was really useful to developp applications, or to make demos applications for clients, and then paying when the application takes off only.
Does Influxis plan to offer something similar?

Desperate For New Features

Are there any new features coming for Muse? It's good but when I see the online web design sites i.e. Squarespace and WIX, I'm beginning to wonder about the feasibility of having Muse CC at a higher cost.
It would be good to be able to embed apps and customize the look and feel of them. Being able to house a blog without coding within a site would be a BIG plus. Maybe some widgets?
I love Muse but I need more features to justify me staying with her.
Thanks,
NJ

I was getting the same error message when trying to instal a simple brush in CS6 64bit, I saved my work and backed out of the program and opened the regular (i'm guessing 32 bit) program and tried to instal them there. It worked no problem. That would be my suggestion to you to see if it is an error in both formats of CS6 and if it works, it might be something to let adobe know is an error that needs be fixed or at least addressed to the general public as to why it won't work. I beleive you should have received both version with your install. I did anyways.
Best wishes

Recommendation for new features in next Sun Studio releases

Hello,
I have started using the Sun Studio Express recently and as a feedback to your opening to receive proposals to new features in the next releases of the Sun Studio collection I would want to point some aspects of interest to the programmers in writing good software for embedded systems and not only.
First of all, with regards to the subject of great interest to me in this moment, multicore/multiprocessor parallel programming, I would appreciate the following :
- if the compiler would be extended with new directives to allow the programmer to measure the load of each core and/or processor that is available to him.
- if the compiler would be extended with directives to allow the programmer to get the core ID on which a specific section of code is executed. As en example consider o multithreaded application and in the associated function for each thread read the core ID and function of this value perform specific actions.
- if the compiler would be extended with directives to allow the programmer to get the ID of the processor in the system - supposing a specific system has many multicore processors. (I don't know if this is possible).
- if the compiler would be extended with directives to allow the programmer to specify the core and/or processor on which it wants to be executed a specific process,thread,function,(maybe instruction).
With these macros I think a lot of things can be exercised, one that I think in this moment is the posibility for the programmer to implement his own algorithm of load balancing for the cores and processors of his system.
Another point I would recommend would be that the watch window in the Sun Studio IDE to permit the selection of the format in which the data to be displayed.As an example if I have a U32 variable to be able to select in the watch window the integer ,hexadecimal or binary format in which I would want to be displayed.
Another useful thins that I sought at other IDEs would be a popup window or something similar to select how to see the source code: as a .c file , as an assembler code , or as a mixture of C and assemble.
That's all for the moment, if I see something else I would post another message.
Thank you,
Steve.

steveg wrote:
First of all, with regards to the subject of great interest to me in this moment, multicore/multiprocessor parallel programming, I would appreciate the following :
- if the compiler would be extended with new directives to allow the programmer to measure the load of each core and/or processor that is available to him.
- if the compiler would be extended with directives to allow the programmer to get the core ID on which a specific section of code is executed. As en example consider o multithreaded application and in the associated function for each thread read the core ID and function of this value perform specific actions.
- if the compiler would be extended with directives to allow the programmer to get the ID of the processor in the system - supposing a specific system has many multicore processors. (I don't know if this is possible).
- if the compiler would be extended with directives to allow the programmer to specify the core and/or processor on which it wants to be executed a specific process,thread,function,(maybe instruction).
With these macros I think a lot of things can be exercised, one that I think in this moment is the posibility for the programmer to implement his own algorithm of load balancing for the cores and processors of his system.
These are OS functions, not compiler's. Solaris has a wide selection of ways and tools to assign processes and threads to cpus; processor_bind(2) is a function you can call and pbind(1M) is a tool you can use on a running app. There are more, just google for it.
Another point I would recommend would be that the watch window in the Sun Studio IDE to permit the selection of the format in which the data to be displayed.As an example if I have a U32 variable to be able to select in the watch window the integer ,hexadecimal or binary format in which I would want to be displayed.
Good point. I'll check if there already is an RFE (Request For Enhancement) filed and file one if it's not. Thanks for letting us know!
Another useful thins that I sought at other IDEs would be a popup window or something similar to select how to see the source code: as a .c file , as an assembler code , or as a mixture of C and assemble.
But there is disassembly window already. See screenshot here: http://developers.sun.ru/images/stories/sunstudio/images/sun_studio_dbx.png

TechEd recording for New Features in Web Dynpro ABAP session

This week's SAP TechEd lecture of the week is New Features in Web Dynpro ABAP - hence this posting in the WDA forum. It covers heavily the new features that came in NetWeaver 7.01 as well as giving a bit of a preview of some of the new features in 7.02. This session was recorded in 2009 at TechEd Phoenix.
http://www.sdn.sap.com/irj/scn/index?rid=/media/uuid/80726482-3d07-2d10-009c-c5a4db525ff0
These TechEd Lectures of the week only last for free for one week and then you need a subscription to the Virtual TechEd to be able to view them. So this session will only be available until June 17th.

you can use link to action in table.So that when you click link you can see the message in window or where ever you want.
check this link how to insert link to action in ALV Table.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/webDynproABAP-UsingUIelementsinALVcomponentcells
thanks
Suman

History applies default presets of new features

In LR3, I set as default the new feature "Enable Profile Corrections". That's fine for newly imported pictures, but if I play with the history of a picture which was imported with an older version (clicking on some step in the history), the feature will sometimes (pretty randomly, as it seems to me) be activated and when I go back to the history step where I was before the picture has changed (with e.g. double correction of vignetting). It means that in some cases you cannot revert to the developed picture you had originally selected, and that's really bad. A similar (though less acute) problem exists with camera calibration profile if you click on a history step named "reset settings": the actual default settings are applied and you cannot revert to the originally developed picture using history.
The problem also exists with snapshots: a snapshot of a picture with "Enable Profile Corrections"=No can activate this feature when recalled. Not in all cases - I simply cannot find out what the logic is.
Can somebody help and propose a workaround? I find it extremely annoying to know that the settings I selected for my pictures perhaps cannot be reverted to when playing with history.
Pierre

OK, here is an example:
Here is the picture as I imported and developed it in an older LR version (it's a Nikon NEF with an xmp companion):
Now I click in history on an older state (here "Quantité de vignettage", i.e. vignetting):
Note that Profile Corrections are now checked (and vignetting is doubly corrected, once automatically and once manually.)
If I get back to the initial state:
Profile Correction is still enabled; the picture has changed although the history state is the same as originally.

How to create console for new domain

I created new domain according to the steps given under creating new domain in
documentation of 6.1, Can any one help me how to get console activated for this
new domain .At present it is not able to get the console for this domain even
though in log files it shows console.war is deployed.
Thanks in Advence

Please follow the exact steps given in the following document to create a new
Domain:
http://e-docs.bea.com/wls/docs61/////adminguide/overview.html#1031797
Also, if you have done so, please check if a directory called .wlstaging is created
in the new domain directory that is created. This directory has the console.war
file.
This is automatically created by the WLS when creating a new domain.
hope this helps.
thanks,
Mihir
surendra wrote:
I created new domain according to the steps given under creating new domain in
documentation of 6.1, Can any one help me how to get console activated for this
new domain .At present it is not able to get the console for this domain even
though in log files it shows console.war is deployed.
Thanks in Advence

Photoshop Elements 12 - preset for new blank file

I am using a trial of Photoshop Elements 12 and I would like to know how to make a preset for a new blank file so I don't have to keep loading that information into the program.
Thank you.

First make sure pse 12 is not running before doing the below steps.
Also, in windows 8.1, you need to have the Hidden Files and folders shown
http://www.ricksdailytips.com/view-hidden-files-and-folders-windows-8-1/
Go to
C:\Users\User Name\AppData\Roaming\Adobe\Photoshop Elements\12.0\Editor
and open the New Documents Sizes.psp in Notepad
Then after whatever number is actually in the file (two in my example)
paste this line and then File>Save
"785 px X 250 px" 785.00 250.00 px 72.00 dpi RGB 8 1.00 white "sRGB IEC61966-2.1"
Then start the pse 12 editor and the preset should show on the preset list in the new document dialog

Creating presets for new features?

Similar Messages

Maybe you are looking for