CREATING PRINT LAYOUT IN CRYSTAL REPORT

how to create print layout that will show the encircle below. thanks

Hi Romel,
Please check below Query.
SELECT T0.[DeposDate], T1.[CheckNum], T1.[CheckSum], T1.[BankCode], T1.[Branch] FROM ODPS T0 INNER JOIN OCHH T1 ON T0.[DeposId] = T1.[DpstAbs] WHERE T0.[DeposDate] >=[%3] AND T0.[DeposDate] <=[%4]
Hope this helps
Regards::::
Atul Chakraborty

Similar Messages

How to add/create additional page in Crystal Report Layout SAP B1

Hi,
I wanna ask about How to add/create additional page in Crystal Report Layout SAP B1 ?
I want when user print Purchase Order then on last page also print some page like Penalty Clause etc.
Pls help me to find the solution.
Br,
Thomas Marsetyo

Hi,
In your report footer, set it to create a new page before it is printed (In 'Section Expert', select the Report Footer -> 'Paging' tab -> Check 'New Page Before' checkbox). Throw your Terms & Conditions into the Report Footer section.
If you already have a Report Footer that you want to keep, just split the footer into two sections (Right-click the Report Footer section -> 'Insert Section Below') and follow the same procedure for the newly created section.
Check this Link
http://stackoverflow.com/questions/9232239/adding-an-additional-page-to-end-of-a-crystal-report
http://www.crystalreportsbook.com/forum/forum_posts.asp?TID=18960
Regards,
Manish

Print preview using crystal report in SAP B1 is very slow.

Dear all,
I face another problem. Print preview using crystal report in SAP B1 is very slow. Although i have create a layout in AR invoice form and applying the print sequences (ie 4 prints). Does any one know how to print preview fast. Just like in PLD.
Thanks in advance
Kamlesh Naware

Hi,
Basically Crystal report run with SQL statement, I would suggest to do well performance tuning on SQL query / Store Procedure.
Structure your query in DBA manner that will make some how faster such as use ( inner join, less condition,...)..
also if it simple query then use Command in Crystal report rather store Procedure..that make some how Faster your report.
Thanks
Kevin
Edited by: Kevin Shah on May 27, 2011 4:21 PM

Create Print Layout Design Through SDK

Hello,
I want to ask is it possible to create Print Layout Design For Invoices through SDK .
Thanks,
Amit

Hi Amit,
It is not possible to get PLD through SDK. You can only use crystal reports if you want it thru SDK. More over, PLD is client specific. So if you design it in your system, then, you need to use Copy Express to push it to your client's (end user) system.
Regards,
Satish.

Print Preview using crystal report in SAP B1 slow.

Dear all,
I face another problem. Print preview using crystal report in SAP B1 is very slow. Although i have create a query view in SQL server but it's still slow for my user. First time i create using table in crystal report. just drag the table. It's take more than 10 minutes. After that i move all the query to view in SQL server , it's take 1-2 minutes to print preview some time more.. But i think that it's still slow. Does any one know how to print preview fast. Just like in PLD.
Thanks in advance
bodhi86

Hello,
How do you answered to this question ?
Malika
Edited by: Malika Sanoune on May 13, 2011 1:48 PM

Error print preview a crystal report

Hi,
I have an issue where i log in as a user with admin rights and try to print preview a crystal report that was created. It prompts me to log into the database, when i do this gives me a login incorrect oracle error. But when i log in as administrator i am able to do this.

Hi,
Additional Info:
CR 2008 SP3 is called by an application using .net. The Application passes a couple of parameters to the CR report. I'm able to preview the report. All the reports use the same set of parameters.
Balaji K

Print Preview of crystal Report without add a document

Dear All,
Can i see the Print Preview of Crystal Report without add a document like PLD.
i have developed a Crystal Report through Add Command by Passing a query.
if anybody have idea on this issue please suggest me.
Thanks.
Shekhawat

Hi Shekhawat....
Through Query Crystal report it is not possible to view the Layout as Draft withou adding teh docs because Report fetch the details only when itys value goes to Database Table......
So suggest to use SAP standard CR and modify as you want....
Regards,
Rahul

Need alternative for activex print control using Crystal reports 2008

I have created a .Net web application (2.0/3.5 .Net framework) with crystal reports 2008.
Reports are viewed using Crystal reports 2008 activex viewer.
On click of PRINT icon in activex viewer, activex print control download prompt will be displayed on client machine.
I need to avoid downloading of activex print control on client machine. Is there any other alternative or option to use print functionality in viewer without downloading activex print control on client machine?
Or Is there any other workaround for print functionality in Crystal reports 2008 Viewer without downloading activex print control?
Note: Activex print control download prompt will not be displayed when using Crystal reprots XI Release 2 version.
Thanks,
Jagannath

Does anyone know which files need to be registered for the ActiveX print control? We occasionally have users who somehow break their Crystal ActiveX controls, and they can no longer see the print options. In Crystal 10, I was able to fix these issues by pushing a package which registered several files on the user's computer.

Can we add custom print button to crystal report launched using jsp

Hi,
I need to add a print icon in crystal report. My requirement states that I should not use the print button given in the taskbar of crystal report. Can this be done?
Thanks

Are you using Crystal Reports for Eclipse? If so, there is a new version out that suports Excel exporting:
/people/blair.wheadon/blog/2009/01/16/announcing-crystal-reports-for-eclipse-20

Error when print out SAP Crystal Report in SAP B1

Dear all,
I have encountered the following message when I tried to print out SAP Crystal Report at client pc:
Could not load file or assembly 'CrystalDecision.Windows.Forms, Version = 12.0.2000.0, Culture=neutral, Publickey Token=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
On the other hand, there's no error when I print out the SAP Crystal Report on server.
Can anyone advice on the error message as above?
Thanks alot.

Hi All,
I have SAP 2007 B,Visual Studio 2008 and Crystal report 2008 Add-on. I am facing the same problem,
"Could not load file or assembly 'CrystalDecision.Windows.form,Version=12.0.2000.0, Culture=neutral,Publickey Token =692fbea5521e1304' or one of its dependencies. The system can not find the file specified."
I have uninstalled SAP B1 and Crystal report 2008. Still I am getting the same Error message. Kindly give me your suggestions.
Regards,
Tom.

Print preview for crystal report

hi kings,
I have one problem . I Designed userform that form have print button when i press the print button the crystal report Open and show the data. but the report is not open when i press the button.Please any one help me out of this issue
the error Shows-Invalid index. (Exception from HRESULT: 0x8002000B (DISP_E_BADINDEX))
Dim oForm As SAPbouiCOM.Form
                    oForm = gonAppApplication.Forms.Item("Emr_NewNCMR")
                    Dim Docnum As String = ""
                    Docnum = oForm.Items.Item("txtDocNo").Specific.value
                    Dim cr As New CRAXDDRT.Report
                    Dim apcr As New CRAXDDRT.Application
                    Dim myCrystalReportViewer As CrystalActiveXReportViewerLib102.CrystalActiveXReportViewer
                    Dim RptDoc As New CrystalDecisions.CrystalReports.Engine.ReportDocument
                    RptDoc.Load(System.Windows.Forms.Application.StartupPath & "\Ncmr.rpt")
                    RptDoc.SetDatabaseLogon("sa", "Sa@123", gonComCompany.Server, gonComCompany.CompanyDB)
                    RptDoc.SetParameterValue("@Docnum", Docnum)
                    myCrystalReportViewer.rptViewer.ReportSource = RptDoc
                    myCrystalReportViewer.rptViewer.Refresh()
                    myCrystalReportViewer.ShowDialog()
thanks regards
B.lakshmi Narayanan

THANKS

Can't Print preview draft crystal report.

Print preview draft crystal report.
Error message:
One or more fields could not be found in the result set.
Use verify database to update the report. Error in file POR20009. Rowset column could not be found.
It occurs when trying to print (or preview) a DRAFT document with the report being a Crystal report. No problems when the document is NOT a draft. This happens on both SAP 8.8 PL16 and PL17.
Updating the report and saving it again (as suggested by the error message) does not fix the problem.
The DRAFT or u201CNORMALu201D document type uses the same Crystal report. Something seems to be different when passing parameters from a Draft report?
I can preview DRAFTS and NORMAL reports from the Crystal Editoru2019s preview pane. This is only happening when launching from within SAP.
Is this a bug?

Hi Maeve,
Can you please help by posting what exactly was the solution to this issue?
Thanks in advance.
Regards,
Sanil

Save printer to layout in crystal reports XI R2 and windows vista ,7 , 2008

Hi ,
I have a problem with the crystal report design , I use CRXI R2 SP6 and with windows vista , windows 7 and windows server 2008 .
The problem is that when I built the report and I go to set page from file , in the page setup form I don't have the printer select button and so I can't save the printer in the report.
With SO earlier it's all ok.
Thanks
Mauro

Hi Enrico,
Can you let us know what is the format of the image you are using.
Thanks,
Naveen.

Print preview using Crystal Report

Hello All,
In SBO 8.8 or in 2007 with add-on (like B1UP) it is possible to have a cystal report launched by the preview buttons. It works perfectly when the document is stored in the DB, the preview is blanked if you don't have the document validated (created in SAP).
In PLD this functionnality is available with the screen variables, is there a way to have it in crystal report?
BR
Arnaud VIVIANT

Hello Gordon.
Thanks for response but it doesn't answer the question.
Question is : is it possible to use the print preview functionnality in crystal without creating a document in the database (as it is possible in layout designer) ?.
I know that the preview will work when I created the document in the DB.
Regards,
Arnaud

InfoView not defaulting print settings from Crystal Reports XI

I have a form/report created from Crystal Reports XI published to InfoView that has the print settings set for the manual tray when printed. When running the report in InfoView, it does not default to the manual tray when printing. I am publishing directly from Crystal Reports. I have the Process/Print Setup 'Set layout to: Report file default' and the Schedule/Format 'Use options saved with report' checkbox checked. I am not finding any other settings to tell InfoView to use the report page layout/printer settings. Anyone know of any other options I should check? Thanks!
Edited by: Kelley Freelove on Oct 22, 2009 3:09 PM

That would be the correct forum as this one is for SDK issues only.
If you are not getting helped on the other BO forum you may want to consider creating a case if you have a valid support contract.
Jason

CREATING PRINT LAYOUT IN CRYSTAL REPORT

Similar Messages

Maybe you are looking for