Creating print media from iweb

I would like to create coordinating business cards and brochures for my website constructed with iWeb. Any suggestions for how to get that done?

I would like to create coordinating business cards and brochures for my website constructed with iWeb. Any suggestions for how to get that done?
Pages is the Apple app designed to create business cards and brochures:
http://www.apple.com/iwork/pages/

Similar Messages

  • Create Recovery Media from Recovery Partition

    I'm trying to help my sister fix her laptop, it's a HP Pavillion DM3. The hard drive has developed a physical fault which is preventing it from booting into Windows, however the Recovery partition appears to be undamaged.
    What I would like to do is replace the hard drive with a new one, and restore it using the recovery partition from the old hard drive. Is there any way I can do one of the following:
    1. Create recovery media when booting into recovery manager/the recovery partition?
    2. Copy the hidden contents of the Recovery folder on this partition (when connecting the drive to another computer), so I can copy the recovery partition to a new physical disk?
    Any help greatly appreciated, thanks.
    Matt
    This question was solved.
    View Solution.

    MattGoldman,
    When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
    The above requested information can be found on the bottom of your computer, inside the battery compartment or on the startup BIOS screen. Please DO NOT include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
    Neither the methods you have described nor the procedures that have been provided will work. While, it possible that "D:\" HP Recovery partition is fully intact it is more likely that it isn't. The only way I think you may be able to recover the system at this moment is to purchase a new hard drive of like size and capacity as the failing drive, and "clone" the entire old drive to the new drive. This will / may require two USB 2.5" external drive enclosures and a working computer to accomplish.
    After the drive is "cloned", place the new drive in the HP laptop computer and see if it boots. If it boots, immediately create the HP Recovery Media. If it doesn't boot, try setting the "D:\" HP Recovery partition as active using a drive partitioning utility. If this boots, it should start the HP Recovery process and return the computer to a factory like state.
    If none of the above works, please contact official HP Customer Support in your region / country, via the HP Worldwide Support Portal, to see if HP Recovery Discs are available.
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Creating Target links from iweb blog

    how can i create a link that will open a new window and not navigate from my blog? iweb automatically inserts 'http://' and if i add a link like
    'jack johson - do you remember'
    iweb reads it as: http://<a href="http....
    this option should be a must have for any blog software. so how can i do it in iweb??

    Welcome to the discussions, tcameron.
    Right now, there's no way to do this from within iWeb, though if you know how to edit the HTML, you can always change it on the server.

  • Printing book from iWeb posting

    I have several hundred images posted on my iWeb site associated with two dozen entries or write-ups. Now, I'd like to a printed copy of my web site, in book form. Is there an easy way to do this?
    I'm familiar with using Shutterfly, Ofoto, etc. but would like to avoid the laborious process of transferring 300 photos, one at a time, into an ibook format scheme. I'd be happy to accept a common format throughout the book (e.g., same number/arrangement of images per page).
    Any suggestions?
    Thanks,
    mbkblack

    I don't think there is a way to directly print your images out from your iWeb page. The resolution of the images on the web page are much smaller than your original images anyway, so it probably would not lead to very high quality prints.

  • How to create recovery media from HDD recovery image?

    When I tried to recover a fresh Windows from HDD recovery my little son stopped the proccedure by accident.
    When I tried to restart I get the message bootmgr is missing. I have a copy from HDD recovery file but din not create a recover DVD.
    The question is if I can make a bootable recover DVD or USB file file from the HDD recovey file?
    Thanks!!!

    There is a method to create bootable USB stick from recovery DVDs or ISO file - http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm but I dont think this will help you.
    Problem is that such back-up is actually useless. There is also option to order original recovery installation disc. You can order it on https://backupmedia.toshiba.eu/landing.aspx

  • Creating & printing calendar from iphoto

    Hello,
    I have create a calendar through Iphoto. Once finished, I sent it to Apple to be printed and its results is 100% ok.
    But the design options are only the ones the software allows, and I need to do more modifications.
    Then I printed to adobe pdf file, and I could do the modifications with photoshop for example.
    Once everything is ready, and I get the finished calendar in a pdf file, I can NOT send it to apple to be printed because Iphone is not available to do so.
    Then:
    * Does anyone know any software where I could do this?
    regards
    david

    You can't do what you want and have Apple print it.  You might be able to find a local printer who could print and bind the pdf file of the calendar. Or look for an online source for custom calendars and see if they can do what you want, either print the pdf file or customize the calendar.
    OT

  • How to create W7 recovery media from retail Windows 8

    I installed retail W8 on my new X230T upon purchase.
    Q drive is preserved, however I cannot find a way to create recovery media from it.
    Any suggestions?

    I'm not sure you can, bitlocker ties your installation to the hardware.
    "To P2V a BitLocker drive, please suspend the protection"
    REF: http://blogs.technet.com/b/chrad/archive/2012/03/12/upgrading-to-windows-8-consumer-preview-just-got-easier-using-vhd-tools-to-p2v.aspx

  • Pdf-file with clickable links from iweb 09

    How can I create a pdf-file with clickable links from a website created in iweb 09?
    All iwork apps have an export button, which fulfills this task, but iweb does not.
    Any idea?

    I am running 10.5.6 on a MacBook Pro 2.53 GHz. I create my PDFs via the print dialogue. I tried to create a PDF from iweb with Hyperlinks activated and all links are dead. I tried to create the PDF from the Safari window, were all links are active, and – funny enough – sometimes all, sometimes half of my links are dead. But most of them do not work. As soon as I create PDFs from third party sites, everything works fine.

  • Printing directly from the file to adobe createpdf online

    I don't find the file created printing directly from the file to the adobe Createpdf online, and I don't also recive any E-mail as a confirmation of welldone work. Do I make a mistake?

    Try the createPDF forum at http://forums.adobe.com/community/createpdf. This forum is for Acrobat.

  • Print booklets from InDesign.

    I used to create print booklets from InDesign but this option disappeared with version CS5. Is Adobe doing anything about restoring this feature? What are my options in the meantime?

    Are you patched to 5.0.4?
    I run XP SP2, rather than 3, and Acrobat 9 pro (now at version 9.3.2) and I haven't had a problem using Print Booklet to make a PDF, so I suspect either it's something in SP3, or more likely a problem on the system.
    First thing might be to try replacing your preferences. See Replace Your Preferences
    Next might be to unistall the PDF printer and reinstall it (does it work outside of Print Booklet?). Make sure you update Acrobat first, if you haven't already done so.
    If neither of those works, see if there's anything else running in the background that could be causing a problem.
    Finally, if nothing is working, it's time to look at a scripted solution. I know two scripts, both by Dave Saunders, that can handle simple two-up saddle stitch impositions without creep. One is better than the other if you have objects crossing the spine, but neither is as sophiticated in what it can do as Print Booklet, which can handle perfect binding with various signature sizes.

  • Creating book from iWeb Blog?

    I have been going back and forth with a decision to create my blog using iWeb or blogger or other blog sites. I want to be able to publish my blog in a book format at some point as a way to archive for my kids. I have found blurb.com as a way to create a book with my blog on blogger, wordpress, typepad, etc. but is there a way to create a book from my blog if I use iWeb? Have any of you done this successfully? I don't want to put a lot of time into my blog on iWeb if I can't easily create a book out of it. Any ideas?

    I have made many books from my blog pages. I created my own simple solution. I save the page as a PDF to Iphoto. I collect all of the pages, rotate them to their side, and create a wire-bound Apple book. This lets me maintain their 8.5 x 11" size (or similar), so the writing is clear. They just have to be read by paging through them like a tablet, so to speak.
    **This solution worked really well with Tiger. I just upgraded to Leopard last night, and can't get them to print to PDF in the proper size for my book (They're too big).
    I've posted a question, and am waiting for an answer. If you have Tiger still, this solution above should work though!

  • Basically... I had an ipod touch sync'd to my dads i tunes.. i then got an iphone and created my own apple id.. how could i transfer the media from my ipod which was used on a different apple id onto my own account without everything deleting

    basically... I had an ipod touch sync'd to my dads i tunes.. i then got an iphone and created my own apple id.. how could i transfer the media from my ipod which was used on a different apple id onto my own account without everything deleting

    Syncing an iDevice to a computer does not remove content from the computer.
    Syncing an iDevice to a computer that it does not normally sync with will remove the content from that device.
    If the media was acquired with a different Apple ID it is in no way linked to your Apple ID.

  • How to print from iweb

    Does anyone know how to print out of iweb, preferably all the pages in sequence to a single pdf file.
    Thanks

    Old post from 5 yrs. ago--wow. I guess this is still not possible. Would sure like to be able to do this. You can choose PRINT, then save as PDF from the print dialogue box, but it only saves the current page and does not show the background color/image.

  • Why does "Print Booklet" from Indesign CS5.5 only create low res pdf? How do I get High Res for Offs

    Long time ID user in Agency. Created a simple 4 page brochure in CS5.5 ID. Facing pages for cust size 11x17 half fold document.
    Generating the pdf for Press and HQ Print renders a nice high res document, but the print booklet feature only produces a skinny low res version. Tried to mess with the printer settings, but the result is the same with a skinny low res document.
    I didn't want to recreate the brochure as a two page manually imposed as I like the option of being able to add more pages in increments of four of course. Plus it's just silly to do that when ID is supposed to handle it for me.
    I worked around it this time by printing to .ps output then distilling, and then splitting the document so printer could have a "front" and "back" 11x17. But this seems kludged big time. This has to be a bug unless I am missing something.

    You probably never changed the default settings in the PDF printer properties. In the print booklet dialog, click the Print Settings button, then the Setup button at the bottom of the Print Dialog that pops up, choose the PDF printer and click on Preferences. Reset the default reset the default settings to the ones you really want to use, or reset them in Windows... Control Panel > Devices and Printers... Double-click the PDF printer, then from the print queue dialog, Printer > Properties... General tab and clcik the Preferences button.

  • Hola a todos , busco una manera de crear un pdf desde la impresora de ios, como lo puedo resolver, gracias. Hi all, I look for a way to create a PDF from the printer ios, as I can solve, thanks

    Hi all, I look for a way to create a PDF from the printer ios, as I can solve, thanks

    Try this process on your Mac. These files will be regenerated by Mac OS X with default settings.
    1. Quit the Mac App Store
    2. Trash the following folders and files; (~ is your Home folder)
    ~/Library/Caches/com.apple.appstore
    ~/Library/Caches/com.apple.storeagent
    ~/Library/Cookies/com.apple.appstore.plist
    ~/Library/Preferences/com.apple.appstore.plist
    ~/Library/Preferences/com.apple.storeagent.plist
    ~/Library/Preferences/com.apple.streagent.plist.lockfile
    Mac HD/Library/Preferences/SystemConfiguration/networkinterfaces.plist
    3. Restart your Mac
    4. Open the Mac App Store
    5. Log into your MAS account

Maybe you are looking for