Creating procedure in sys with other schema... privileges error

Hello,
I am trying to create or replace a procedure under SYS but logged in with another schema called ABC.
This ABC schema does have the proper grants ( alter , create etc... any procedure )
but I get the insufficient privileges error ORA-01031: insufficient privileges
Can this be done at all as I would need to be logged in with this ABC schema in order to serve my purpose.
Thanks

jrmtl wrote:
I have created a procedure under SYS ( because we don't want it anywhere else ) which does an ""alter user and grant sysdba"" over to another another user.
I granted execute to this user ABC ( grant execute on SYS.xxxxxxx to ABC )
And I still get a
ORA-01031: insufficient privileges
what am i mising ?
ThanksAnd why would you want to do that? You shouln't be granting sysdba to any but a very small group of DBA's. You can do it at a command line in less than two minutes. Why do you need to bake it into a procedure to be executed from Grid?
If anything, your explanation just took your intention from bad to worse.

Similar Messages

How Create procedure or function with ADO ?

Hello,
How Create procedure or function with ADO?It's my question.
Thanks.
Henri

This message if post by Taiwan-ChangHaw-Oracle-Stored-Procedure-For-Business-Rule-Club
public bool ConnectDatabase()
try
{ string strConnectionString =
"Provider=OraOLEDB.Oracle" +";"+
     "Data Source=" + ConnectionParams.Datasource +";"+
"User Id =" + ConnectionParams.Username +";"+
"Password =" + ConnectionParams.Password;
     m_conn=new ADODB.Connection();
     m_conn.ConnectionString=strConnectionString;
     m_conn.Open("","","",0); //i_"YYAOl Open the connection
catch(Exception e)
{     System.Windows.Forms.MessageBox.Show(e.Message);
     return false;
return true; //YYAOl_B>3I9&connected successfully
public void InsertDescription(string p_product,string p_language,string p_tname,string p_tdescription)
{ string sql="{Call inserttranslateddescription(?,?,?,?,?)}";
try
{ ADODB._Command cmd=new ADODB.Command();//Create a command object
cmd.ActiveConnection=m_conn; //Set its active connection to open connection
ADODB.Properties properties=cmd.Properties;//Get the command properties into ADODB Properties object
IEnumerator ienum=properties.GetEnumerator();//Get an enumerator on above properties
ADODB.Property singleprop;
while(ienum.MoveNext()) //iterate through the enumerator
     {singleprop=(ADODB.Property)ienum.Current;//Get the current property from enumerator
     string propname= singleprop.Name; //Get the name of current property
     if(propname.Equals("NDatatype")) //if the property is 'NDatatype' set its value to true
     singleprop.Value=true;
cmd.CommandType=ADODB.CommandTypeEnum.adCmdText;
int pid=Int32.Parse(p_product);
ADODB._Parameter langid     =cmd.CreateParameter("langid",          ADODB.DataTypeEnum.adChar,ADODB.ParameterDirectionEnum.adParamInput, 100,p_language);
ADODB._Parameter productid =cmd.CreateParameter("productid",     ADODB.DataTypeEnum.adNumeric,ADODB.ParameterDirectionEnum.adParamInput, 100,pid);
ADODB._Parameter tname =cmd.CreateParameter("tname",          ADODB.DataTypeEnum.adBSTR,ADODB.ParameterDirectionEnum.adParamInput, 50,p_tname);
ADODB._Parameter tdescription=cmd.CreateParameter("tdescription",ADODB.DataTypeEnum.adBSTR,ADODB.ParameterDirectionEnum.adParamInput, 50,p_tdescription);
ADODB._Parameter check          =cmd.CreateParameter("check",          ADODB.DataTypeEnum.adNumeric,ADODB.ParameterDirectionEnum.adParamOutput,100,0);
cmd.Parameters.Append(langid);
cmd.Parameters.Append(productid);
cmd.Parameters.Append(tname);
cmd.Parameters.Append(tdescription);
cmd.Parameters.Append(check);
cmd.CommandText=sql;
//Execute the command to insert product details in database
object recs;
object param=p_language;
cmd.Execute(out recs,ref param,1);
ienum.Reset();
while(ienum.MoveNext()) //iterate through enumerator
{ singleprop=(ADODB.Property)ienum.Current;//Get the current property in to Property object
string propname= singleprop.Name; //Get the name of current property
if(propname.Equals("NDatatype")) //if it is 'NDatatype' set its value to true
singleprop.Value=false;
IEnumerator iprop=cmd.Parameters.GetEnumerator();//Get the enumerator for command parameters
while(iprop.MoveNext()) //loop through enumerator
{ //Get the current parameter in enumerator
ADODB._Parameter checkval=(ADODB._Parameter)iprop.Current;
if(checkval.Name.Equals("check")) //if the parameter is 'check'
if(checkval.Value.ToString().Equals("0")) //If check's value is zero data was inserted
System.Windows.Forms.MessageBox.Show("Product details Inserted successfully");
else
System.Windows.Forms.MessageBox.Show("Product Details Updated");//else data was updated
catch(Exception e)
System.Windows.Forms.MessageBox.Show(e.Message);//Display any error message
}

Create different log file with different schema by spool

Hello,
I want to know a way to create a different log file depend on different schema
I have two schema on same db server
1) schema kennam/*****/kennam
2) schema koonhey/*****/koonhey
by a way, I want to create a different log file name e.g. kennam.log / koonhey.log on such two schema...
I always run @showbalance; to run showbalance.sql to create that report..
I hope you understand what I talking about (english is not my native language........), anyone could help?
showbalancelog.sql
spool c:\log.log+
spool c:\log.log
select to_char(sysdate,'dd-mm-yyyy hh:mi:ss') from dual;
column com_name format a20;
select cus.tid, cus.com_name com_name, cus.com_balance,
NVL((select sum(invoice_total) from invoice where com_id=cus.tid),0) sum_invoice,
NVL((select sum(cheque_amount) from income where com_id=cus.tid),0) sum_income,
cus.com_balance -
NVL((select sum(invoice_total) from invoice where com_id=cus.tid),0) +
NVL((select sum(cheque_amount) from income where com_id=cus.tid),0) total_balance
from customers cus
order by cus.tid;
spool off

okey I solved on this way, is anyone know another simpler way?
be simpler part
variable vspoolfile varchar2(20)
declare
username varchar2(20);
spoolfile varchar2(50);
begin
select 'c:\' || user || '.log' into spoolfile from dual;
-- spoolfile := 'c:\' || username || '.log';
:vspoolfile := spoolfile;
-- dbms_output.PUT_LINE(spoolfile);
end;
-- print :vspoolfile;
column spoolfilecol new_value definespoolfile noprint
select :vspoolfile spoolfilecol from dual;full content of my showbalancelog.sql file
variable vspoolfile varchar2(20)
declare
username varchar2(20);
spoolfile varchar2(50);
begin
select 'c:\' || user || '.log' into spoolfile from dual;
-- spoolfile := 'c:\' || username || '.log';
:vspoolfile := spoolfile;
-- dbms_output.PUT_LINE(spoolfile);
end;
-- print :vspoolfile;
column spoolfilecol new_value definespoolfile noprint
select :vspoolfile spoolfilecol from dual;
spool &definespoolfile;
column com_name format a20;
select cus.tid, cus.com_name com_name, cus.com_balance,
NVL((select sum(invoice_total) from invoice where com_id=cus.tid),0) sum_invoice,
NVL((select sum(cheque_amount) from income where com_id=cus.tid),0) sum_income,
cus.com_balance -
NVL((select sum(invoice_total) from invoice where com_id=cus.tid),0) +
NVL((select sum(cheque_amount) from income where com_id=cus.tid),0) total_balance
from customers cus
order by cus.tid;
spool off;

Wwsec_api packaged procedures not accessed by other schema user.

I am trying to use wwsec_api packaged procedure in portal application developed in another users schema and owned by that user. When I try to execute wwsec_api procedures it gives numeric or value error.
could anyone tell what all permissions/grants to be set to access security package in other user's schema's portal application?

Have you tried running provsyns.sql? It's detailed in the PDK.

SPS7 .hdbprocedure with INSERT gives privilege error during activation

Hello All,
We have upgraded to SPS7. We are trying to use an INSERT statement on a database table in a .hdbprocedure. For this we removed the READ SQL
addition on the SQL header, made SQLSCRIPTMODE parameter as UNSECURE in Configuration.
But the problem with privilege seems to be at the table level. I try to create a Custom role(.hdbrole). This gets activated fine when I just give the SELECT on the SCHEMA.
But when I add INSERT in addition to SELECT privilege on schema holding the table it gives an error Cannot Activate/No Privilege to activate Catalog Object
The INSERT on the table is not letting me activate the .hdbprocedure or a custom role. Can you please advice what could be the problem.
Also, an SLT has been configured to get data into these set of tables, could this be the problem.
Best regards,
Pavan

Hi Phoenix,
The user should grant the respective read/update/delete privilege on the schema used in the Procedure to _SYS_REPO user.
If this is a SLT generated schema then there are roles generated which provide such privilges o the users you can use them to grant privilege to _SYS_REPO user.
Regards,
Anjali.

Creating a view using With causes ORA-00600 Error

Hello Ladies and Gents,
I've been trying to deploy a recursive query as a view in Oracle XE and Standard Edition, neither to much success.
The query is located in this question here: http://stackoverflow.com/questions/17358109/how-to-retrieve-all-recursive-children-of-parent-row-in-oracle-sq
with recursion_view(base, parent_id, child_id, qty) as (
   -- first step, get rows to start with
   select
parent_id base,
parent_id,
child_id,
qty
from
md_boms
union all
-- subsequent steps
select
   -- retain base value from previous level
previous_level.base,
   -- get information from current level
current_level.parent_id,
current_level.child_id,
   -- accumulate sum
   (previous_level.qty + current_level.qty) as qty
from
recursion_view previous_level,
md_boms current_level
where
current_level.parent_id = previous_level.child_id
select
base, parent_id, child_id, qty
from
recursion_view
order by
base, parent_id, child_id
The query itself works and returns results. However, when I try to create a view with that query, I receive errors.
I've posted two screenshots: http://www.williverstravels.com/JDev/Forums/StackOverflow/17358109/ViewError.jpg and http://www.williverstravels.com/JDev/Forums/StackOverflow/17358109/InternalError.jpg The first one with the ! and * is when I am using JDeveloper 11g, using the Database Navigator, right-click on View and select "New View". I receive the error when I click OK. I can indeed create the view through a sql script, but when I attempt to view the data, I receive the ORA_00600 error.
I've tried this on both my local machine for XE (version 11.2.0.2.0) and on 11g Standard Edition (11.2.0.2.v6) via Amazon Web Services. The result is the same.
Does anyone know how to get around this?

Not 5 minutes after I post this, I decide not to use JDev's graphical editor, and simply write
SELECT * FROM BOMS_VIEW;
And it works like a charm. I just can't use data tab to view the records in the editor. Wish I had known that 5 hours ago.

Create a new user for oracle 10G ASM instance with sysdba system privilege

Hi,
In our Golden Gate Project, we require the SYS user credential to connect to the Oracle 10g ASM instance to read the database transaction logs.But our client is not providing the SYS user credential to connnect to ASM instance.
I'm getting the error message "ORA-01109: database not open",When I tried to create a new user using the below the steps in oracle 10g ASM instance
1. Login using "sqlplus / as sysdba"
2. Create user <username> identified by <password>;
But in oracle 11g ASM instance, I'm able to create new user by connecting the ASM instance with SYSASM role without issues.
Is there is any workaround to create a new user with sysdba system privilege in oracle 10g ASM instance?.
Thanks in advance .

Hi,
Recreate the password file for the ASM instance as follows:
Unix:
orapwd file=<ORACLE_HOME>/dbs/PWD<SID> password=<sys_password>
Windows:
orapwd file=<ORACLE_HOME>/database/PWD<SID>.ora password=<sys_password>
Now sys password is reset, we are ready to use sys for ASM management. I decided to create another user ASMDBA as I tried above.
SQL> create user ASMDBA identified by test01;
User created.
SQL> grant SYSASM, SYSOPER to ASMDBA;
Grant succeeded.
SQL> select * from v$pwfile_users;
USERNAME SYSDBA SYSOPE SYSASM
SYS TRUE TRUE TRUE
ASMDBA FALSE TRUE TRUE
Please see this link : http://orachat.com/how-to-change-asm-sys-password-creating-sysasm-user-11g/
Thank you

Export objects for others schemes

Hi
I create Procedures/Packages/Tables in an Scheme , after I Must to Export to other Scheme.
I have 4 schemes, How can I to create a Script without to need rebuilt all scripts ?

Are you asking to extract the scripts, if so then use
OEM or TOAD.
If you want to import in other schema then use
fromuser - touser
RegardsSorry , I did not get to explain very well, My english is horrible;
Are new objects, with
Create Table
Create or Replace Procedure
..etcI Must to pass script to DBA for He to compile

Problem accessing Sql server Procedure from Crystal with JDBC driver

I have some Crystal reports using SQL Server procedures, most of them are working very well; however, I have 2 that have problems accessing sql server procedures. These reports are working using OLE DB connection without problem, but when I try to relocate the connection to JDBC Crystal generates an error like that the procedure not return records.
The procedure is working with other products including OLE DB connections from crystal.
What can I do?
Thanks in Advance,
JaimeC

I am using:
Crystal report 11 - 11.0.0.1282 and Crystal 2008 = 12.0.0.683
SQL Server 2005 - Microsoft SQL Server Management Studio Express 9.00.4035.00
Windows XP
I have discovered that the procedures create and work temporary tables. In other cases when is working ok, the procedures have not working temporary tables.
Thanks,
Jaime Carrillo

Access other schema's table without specify the schema name

Hi, need ur help again,
I would like to access other schema's table without specify the schema name. for example,
select * from hr.jobs;
What priviledges i need if i want to select the data in this way:
select * from jobs;
Thanks!

Public synonyms have their place, but are not generally a good idea as they will cause conflicts with other schemas and applications. Another think that you can do is issue the
ALTER SESSION set CURRENT_SCHEMA = schema;
The CURRENT_SCHEMA (8i and above) parameter changes the current schema of the session to the specified schema. Subsequent nqualified references to schema objects during the session will resolve to objects in the specified schema. The setting persists for the duration of the session or until you issue another ALTER SESSION SET CURRENT_SCHEMA statement. CURRENT_SCHEMA is a session parameter only, not an initialization parameter.
This setting offers a convenient way to perform operations on objects in a schema other than that of the current user without having to qualify the objects with the schema name. This setting changes the current schema, but it does not change the session user or the current user, nor does it give you any additional system or object privileges for the session.

Create EDI sales order with reason for rejection set for item

Hello all,
I'm trying create an EDI sales order with item rejected, but I get the following error: Item 000001's configuration can no longer be changed.
I set the reason for rejection in the segment E1EDP01, field ABGRU.
How can create the sales order, with item rejected without error?

Use program SDJEDI to simulate the error (see note 380603)
This way you can figure out whether the same issue exists in VA01 or just in the SD EDI process
From reading the issue, it seems you have a configurable item and the line is not open for input and that's why your reason for rejection is ignored.
But SDJEDI should tell you everything.
Run it first to see the BDCDATA your idoc produces.
Then run it again in simulate mode and it should take you very close to the error
Hope this helps
Paul

LGWR: Standby database destination mismatch with other open instances

Hello ,
I have the Primary RAC d.b. and standby : single instance .
When I try to start a second node of RAC d.b. , then I get errors :
Error 1033 received logging on to the standby
LGWR: Error 1033 verifying archivelog destination LOG_ARCHIVE_DEST_2
Destination LOG_ARCHIVE_DEST_2 is UNSYNCHRONIZED
LGWR: Continuing...
LGWR: Standby database destination mismatch with other open instances
Errors in file /ora01/app/oracle/diag/rdbms/db2/db2/trace/db2_lgwr_28221.trc:
ORA-16075: standby database destination mismatch
LGWR (ospid: 28221): terminating the instance due to error 16075
But the first instance is working , without any errors .
The d.g. is working in maximum protection mode .
Thank's

Spfile is used :
SQL> show parameter spfile
NAME                                 TYPE        VALUE
spfile                               string      +DATA/db/spfiledb.ora                                                 a
And on both instances , log_archive_dest_2 is the same :
log_archive_dest_2                   string      SERVICE=dc5 SYNC AFFIR
                                                 M NET_TIMEOUT=30 REOPEN=300 DB
                                                 _UNIQUE_NAME=dc5 VALID
                                                 _FOR=(ALL_LOGFILES,PRIMARY_ROL
                                                 E)
And :
1* select inst_id, name,value from gv$parameter where name='log_archive_dest_2
INST_ID NAME
VALUE
      1 log_archive_dest_2
SERVICE=dc5 SYNC AFFIRM NET_TIMEOUT=30 REOPEN=300 DB_UNIQUE_NAME=dc5 VALID_FOR=(ALL_LOGFILES,PRIMARY_ROLE)
      2 log_archive_dest_2
SERVICE=dc5 SYNC AFFIRM NET_TIMEOUT=30 REOPEN=300 DB_UNIQUE_NAME=dc5 VALID_FOR=(ALL_LOGFILES,PRIMARY_ROLE)

Cannot create disk image iDvd 7.1.2 (multiplex error)

I'm at my wits end and extremely disappointed.
Basically, I've gone through the threads that I can find, I'm down to importing a basic movie directly into iDvd. No menus. No options enabled (that I'm aware of).
When I go through the iDvd process of creating a disk image all goes smoothy until the very end when I get a multiplexor error (no error code or text saying why).
Extremely frustrating. This is on a new Macbook Pro running 10.7.2. I don't have problems with my other Apple systems, just this new one. Perhaps Apple would like to take it back??

Hi
Multiplexing Error
Multiplexing error is a very complex problem due to many things (long long list following) -
one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

ORA-01031: insufficient privileges when creating a table in other schema

Dear all,
I appreciate your help please in this issue :
when i try to issue the below statement to create a table in an another schema than the user i am connected in
CREATE TABLE SCHEMA_NAME_B.HST_ARCH nologging AS
SELECT *
FROM HST
WHERE 1 = 0;
I always get ORA-01031: insufficient privileges error, even if i have granted the create table privilege to the user i am connected in.
What other privileges should i grant also,
Please if you have any idea.

user562674 wrote:
Dear all,
I appreciate your help please in this issue :
when i try to issue the below statement to create a table in an another schema than the user i am connected in
CREATE TABLE SCHEMA_NAME_B.HST_ARCH nologging AS
SELECT *
FROM HST
WHERE 1 = 0;
I always get ORA-01031: insufficient privileges error, even if i have granted the create table privilege to the user i am connected in.
What other privileges should i grant also,
Can you show us a cut/paste from the sql*plus of session of yours which should show that you have given the privilege directly to this user and after that the command fails?
Aman....

Error creating dynamic page in an application with a schema other than portal30

Running 9iAS 1.0.2.2 on Solaris.
Database 8.1.7.1
I cannot seem to create a default dynamic page (select 'x' from dual) in an application that has a schema (e.g. test) other
than portal30. The error seems to be when portal tries to compile the dynamic-page package, it references itself from
within the package but prefixing the call with the other (test) schema. It never seems to compile? What seems to be the
problem? Any ideas?

If you are using any database object other than the applcation owned,then it has to be prefixed with the schema owner.
For example,
if the application schema is based on the schema "schema1" (say)
and your query is based on one of the object on "schema2"
and if you have necessary privilegves to access that object from schema2, then the compiler wont throw any error.
Can u explain, what u problem you are experiencing in detail?
(Also, if u give me the portal version, I can cross-verify that).

Creating procedure in sys with other schema... privileges error

Similar Messages

Maybe you are looking for