Creating process chains in production environment..

Hi,
We are planning to create process chains in our project , can we directly create process chains in the production environment? the data and the set up is very very small here  so the number of chains and processess are very less , is it ok if we create the process chains in Production environemnt directly, or we need to create in development and transport it to production (note: there is no quality instance for BW in our project).
Solicit your help!!
Regards
Srinivas

Hi ,
Best practice would be to create PC in DEV and move it to PRD .
Actually what happens in real time is sometimes your data mismatch happens or some other data loading activity you are doing in PRD system . So you need the freedom of creating DTP or Infopackage directly in PRD system . otherwise it would be a time consuming process to make it from DEV to PRD .
Similarly when you are Infopackages & DTPs in PRD environment, there is a chance that your process chain might also be changed . So yes we can create it in PRD system .
Kind Regards,
Ashutosh Singh

Similar Messages

  • Creating Process chain

    Hi,
    May Iknow how to create only process chains  in production. We have a requirement, where client is expecting us to create in production directly..as he has seen other places.. So plz lelt me know how to set the aurthorizations..
    Thanks a lot

    In RSA1, select Transport Connection.
    At the top, click on the Object Changeability icon (with the truck).
    A "Changeability of Object Types" window will appear.
    Double click on RSPC (Process Chain).  Note that the last column will change from "Not Changeable" to "Changeable Original".  Double clicking again will toggle it back to "Not changeable".
    Also double click on RSPT (Process Chain Starter) and RSPV (Process Variants) to make them changeable.
    Hope this helps.

  • Transporting Process Chains from Production DOWN to QA and Dev

    Hello,
    We have a ton of Process Chains in Production.  I am looking for the easiest and most efficient way to duplicate those in QA and DEV. 
    What steps do I take to Transport them DOWN to the other two environments?  Are there any pros or cons to doing this, or is it easier in the long run to just re-create them in those environments?  Like I said, we have a ton!  Any help would be greatly appreciated.
    Thanks in advance.

    Hi
    The best practice is to have every development done in Dev then transport to QA and then to P.
    If you are not following this process for PC you should.
    Also, every now and then QA should be refreshed (meaning, copy P to a new QA system and by doing so all the data and config (including PC) will be in the QA system).
    I would recomend to recreate the PC in DEV and transport them thru the landscape.  This way you have the correct process where every Development is starting on the DEV sys and moves to QA->P.
    Edan

  • Steps to create Process Chain in  Version 2004S SAP NetWeaver

    Hi,
    I have created a process chain in 3.5 version.Now i want to create a process chain in 2004s version.so what should be the steps to create this process chain.

    Hi
    1. Goto RSPC
    2.By using create icon create process chain.
    3.Now it will ask for process variant. Either assign already made or create new on.
    4. Now save it.
    5.Refresh the tree and u will find ur Procees chain in the list.
    Hope it helps, if so then assign points.
    Vinod.

  • Problem in creating process chains for CO

    Hi Friends,
                     I have a CO cube "0OPA_C11" getting data from Three datasources,
    those are 0CO_OM_OPA_6(supports delta), 0CO_OM_OPA_1(full only), 0CO_OM_OPA_2(full only), i have already created process chain to this cube using these three datasources, the chain is like this,
    1. delete indexes
    2.0CO_OM_OPA_6(supports delta
    3.0CO_OM_OPA_1(full only),
    4.0CO_OM_OPA_1(request overlapping)
    5.0CO_OM_OPA_2(full only),
    6.0CO_OM_OPA_2(request overlapping)
    7.create indexes
            Is it right? here the chain is running, after completion of that, in manage of cube, it is showing only the request for 0CO_OM_OPA_2(full only), the request which were there earlier like Init request and new delta request for .0CO_OM_OPA_6, full request for 0CO_OM_OPA_1 are getting deleted, it is showing the request only for 0CO_OM_OPA_2,
      the way how i created the process chain is right or wrong? can anybody give me the solution?
    Thanx in Advance
    BalajiReddy

    Hi Nick,
              Thanx for your reply, everthing is ok what you've asked me to check, i think there is certain scenario to create the process chains for the data targets, which are getting data from multiple datasources, which support delta's as well as full.
              I want that scenario, can you tell me? or can anybody tell me?
    The right points are assigned to the right answers.
    Thanx in advance
    balajireddy

  • How to create process chain with dso and infocube at a time

    hi friends,
      i have a FLATFILE in application server and i need to upload it to STANDARD DSO and i created a INFO PACKAGE and DTP for DSO.
    i have a STANDARD INFOCUBE to upload data from above DSO. here DSO is the source.  i want to schedule  this process in process chain. how could i do this. any one please give me solution.
         can any one explain me the options in RSPC and how they work and where we exactly use. this is very helpful to me. please give me guidance. thank you.
    thanks,
    sree

    First make sure you have already created the infopackage to load the data from server to the DSO and the DTP to load data from DSO to the Cube.
    Now goto Tcode RSPC.
    Choose Create process Chain option. provide appropriate technical name and description.
    Drag "Execute infopackage" process type from left hand side pane in RSPC.  Choose the infopackage to load the data from Server to DSO. you can find this infopackage using the F4 help in the above selected process type.
    Drag the "data transfer process" process type to load data from the Flat file data source above to the DSO.
    Then Drag the "Activate DataStore Request"  process type and select the DSO in which you would load the data  using the above DTP.
    Drag the "data transfer process" process type to load data from DSO to the Cube.
    Save, activate  and schedule the process chain according to appropriate time.

  • How to create Process chain in BI 7.0

    hi,
        I dont know how to create process chain in BI 7. If any one have document step by step process to create process chain. help me. thank u.

    check these links..
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/00a1f389-ec7c-2c10-04bc-9d81b3084171
    http://wiki.sdn.sap.com/wiki/display/BI/Processchainscreationandmonitoring
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/900be605-7b59-2b10-c6a8-c4f7b2d98bae
    http://wiki.sdn.sap.com/wiki/display/BI/FiveWaystoEnhanceBIFunctionalityUsingABAP--PartV--ABAPinProcess+Chain

  • Do we need to create process chain explicitly nor system generates process

    Hi all,
    Do we need to create process chain explicity in bpc netweaver nor the system generates it internally when we run data managment packages
    thanks
    Pooja

    When you install BPC, there is a set of delivered process chains which are installed as well.  You create the data manager packages from the BPC Excel clicent based on these process chains.  You can of create custom BPC process chains in NetWeaver and create packages from those as well(for example via a How-To guide).   So to answer your question, no, you do not have to create the "standard" process chains, and they are not generated by the system either, they are delivered as part of the BPC installation.
    Regards,
    Rich Heilman

  • How to create process chain for 0EMPLOYEE

    I want to create process chain for 0EMPLOYEE attribution and text, how to create it and make a schedule for daily loading? Could anyone write steps in my case? Thanks!

    Hi,
    Follow the following steps:
    1. Go to RSPC->create->give name and disc of your chain.
    Start Variant Creation
    2.  Now you will be prompted to give a start variant,create a  new variant(click on page icon )
    3.Change Selections->date/ time.
    4.give date and time for start of the chain.
    5.click the check box for periodic job->period values->daily->save->save
    Addition of process types
    6.Select the process type "Execute Infopackage"
    7.select the name of the infopackage which loads attr data to 0EMPLOYEE.
    8.Attribute Change run will come automatically( if not then drag it as well and create variant )
    9.select the name of the infopackage which loads text data to 0EMPLOYEE.
    10.Attribute change run wil again follow.
    (connect the process types which are not connected,by right clicking the process types )
                                 start
                           IP A     IP  T
                          attr          attr
    A = attribute
    T = Text
    Please Reward points if useful
    Manish

  • How to create process chains

    Hi Friends,
       I got one task on regarding creation of process chains, I am new to creation of process chains, can any one help me out immediately, pls send some documents and some sample process chains to my mail " [email protected]"

    Hi Kuna,
       Use TCode RSPC to create process chains.
       Pls. refer to this link for further development.
    http://help.sap.com/saphelp_nw04/helpdata/en/8f/c08b3baaa59649e10000000a11402f/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/7b/d4313b38bea774e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/d5/e80d3dbd82f72ce10000000a114084/content.htm
    Also check..
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
    assign points if useful ***
    Thanks,
    Raj

  • How to create process chains for Master Data?

    I need information on " how we can create process Chains for Master Data"

    Hi Sachin,
      http://help.sap.com/saphelp_bw33/helpdata/en/ad/6b023b6069d22ee10000000a11402f/frameset.htm
    and also Modelling aspects in process chains (ppt)
    https://websmp109.sap-ag.de/~sapidb/011000358700002337702003
    Hope this helps.
    Srini

  • How to Create Process Chain for Remote Cube.

    Hi,
              I created Remote info cube, data from ECC, loaded Successfully, I want to create Process Chain for Reomte Cube, Please Help me.
    Thanks,
    Nandish Gowda

    Hi Nandish,
    After initialization, th next delta will come as per your delta nature, if it is 0calday: Then your next delta will come tomorrow only.
    If you are able to 7 records in RSA3, why not in PSA( Why it's only 5 records). Analyze this closely.
    Sometimes, RSA3 exactly doesn't match with PSA because, RSA3 works on update mode F.
    Regards,
    Suman

  • HOW TO CREATE PROCESS CHAIN FOR PSA ARCHIVING

    SDN EXPERTS,
    i like to create process chain for archiving. but i dont see any event for archiving when i go to create a process chain for PSA archiving. please let me know.
    thanks

    Hi,
    In the below document on the 14th page it says it is not possible to archive the master data & PSA.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f47fec9f-0501-0010-ce84-8a7231715ae6
    As per my understanding..
    But one thing you can do is use another ODS and load the same data that you're loading to something else and try to archive that data(Only if you have transformations in the current CUBE/ODS).
    Correct me if i was wrong and eloborate your requirement.
    Regards, Siva

  • How to create Process chain for Aggregate for Master data

    Hello friends,
    I created Aggregates on Navigational Attributes.
    Now they are working fine, but i need to know that how shall i create the Roll up for Aggregates on Navigational Attributes.
    The point is the master data changes frequently a lot of time for e.g. for 0customer etc.....
    So if any one can send me the step by step documents so as to know how to roll up the Aggregates for Navigation attributes or for aggregates created on Master data....
    How to create process chains for the same ?????????
    Because if master data changes, then rolling up the aggregates straight forward will not help.
    So we need to write a process chain so that it deactivates the aggregate and reactivate again and fill up again..........
    If i mis interpreted something please rectify it.......
    Please advise

    Hello,
    the changerun that you have to schedule in order to activate the master data will adjust the aggregates automatically.  There is no need to deactivate them after master data loads.
    Best regards,
    Ralf

  • How to create process chain ?

    hi all,
    will you please simlify how to create process chain if anybody has a screen shot or slide show about pc creation it will definatly help me a lot.
    rewrd point for sure,

    This may help:
    [http://help.sap.com/saphelp_nw04s/helpdata/en/67/13843b74f7be0fe10000000a114084/content.htm]
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045]
    Regards,
    Jordi

Maybe you are looking for