Creating Process Integration Scenario with synchronous connections

Hi,
I'm trying to create a process integration scenario in which the first step is a synchronous call by a B2B supplier to a webservice hosted on PI ccBPM.
Step1) I have created two swim lanes:
Lane1: Supplier.
Lane2: PI ccBPM.
Step2) I've created an outbound synchronous interfaces for the supplier and an inbound synchronous interface for the ccBPM. I assigned these to two actions.
Action1: Supplier_Send(OutboundSync)
Action2: PI_Receive(InboundSync).
Step3) Assign the actions to the swim lanes.
Lane1 -> Action1
Lane2 -> Action2
Step4) Connect Action1 and Action2. At this step, the connection is shown as asynchronous. Since both the actions are synchronous, this is clearly incorrect.
Can someone please help?
Thanks,
Harsh

> Connect Action1 and Action2. At this step, the connection is shown as asynchronous. Since both the actions are synchronous, this is clearly incorrect.
Put actions on same level.
Connections are sync, when actions are on same level and async, when actions are on different levels.

Similar Messages

Synchronous process integration scenario with PI 7.1

Hi all,
Iu2019m trying to create a process integration scenario which contains two actions. Both actions use the same synchronous interface to a web service which takes some parameters and returns a value. When I check the configurability it displays the errors:
Connection from Action1 to Action2 has no outbound interface
Connection from Action1 to Action2 has no inbound interface
and the warning:
Connection from Action1 to Action2 has no mapping
I first assigned the service interface as outbound interface to Action1 and inbound to Action2. Next I tried to assign the interface in- and outbound to both actions, but this didnu2019t change anything on the message. The same scenario with the interface set to asynchronous seems to be valid (but looses the return value of course).
Can anyone give me a hint what Iu2019m doing wrong? Is there any special consideration for synchronous communication which doesn't apply for asynchronous services?
Regards,
Tarik

Deleting and recreating the actions and service interfaces exactly the same as they were before solved the problem. Seems as if changes in the interface objects sometimes are not activated correctlyu2026

Integration scenario with BPM

Hi all,
I have an integration scenario: iDoc -> XI -> iDoc,
On the XI I use a BPM process.
1. On the Repository:
I have designed the integration process on the IR, and imported the needed iDoc.
I have created an integration scenario which consists of two SAP R/3 SWC, and an XI3.0 SWC.
The XI3.0 is assigned to the integration process.
2. On the Directory:
I am using the wizard to configure the scenario.
I have assigned the R/3 SWC to the required business systems.
I have created a service named "ProcessBPM" for the integration process and assigned it to the XI SWC.
all other objects(receiver determination, interface determination... etc.) were created automatically by the wizard.
when I send the iDoc to the XI, I get an error on the SXMB_MONI:
Unable to convert sender service ProcessBPM to an ALE logical system.
What does this error mean ? What have I missed ?
Is this the way to do the described scenario ?
Thank you,
Elad.

Hi Elad,
one second
>>I have entered the logical system name of my XI,
you enter logical names for r3 business systems (idoc sender or receiver)
>>Logical system <LS_Name> already exists in service <Service_Name>".
they have to be unique
if you're using BMP - try replacing the business system in "header mapping" (sender system) in receiver agreement
(to your r3 - the one with the unique LS name) - this way you'll be able to use the name as many times as you want:)
http://help.sap.com/saphelp_nw04/helpdata/en/5d/112d20f6ce6c46ba66afb98d278fbd/content.htm
Regards,
michal
Message was edited by: Michal Krawczyk

Configuring Process Integration Scenario

Hi,
I have created a Process Integration Scenario in ESR and trying to create ID objects.
I am referring this blog: /people/shailesh.mane/blog/2006/06/29/b2b-configuration-part-ii--creating-the-configuration-using-the-automated-configuration-tool
I am confused while running the wizard.
1) Can anyone please confirm what objects should I create in ID before running the wizard
I have a External Party --> SAP PI -> IDOC scenario (with multiple actions inbetween). I am using PI7.1.1
Thank you,
Pankaj.

Hi Pankaj ,
While you design your process integration scenario . while you do insert application component for sender and receiver
Have you checked the tab " Communication tab --" External party with B2B communication."
I am not sure but this is your problem I guess ,
Please have a look at the link
http://help.sap.com/saphelp_nwpi711/helpdata/en/48/ce988318d3424be10000000a421937/frameset.htm
Since you are using IDocs , you cannot use integrated configurations( not sure whetehr its supported in your Service pack version ) hence no use of "sender uses virtual receiver "
http://www.riyaz.net/blog/local-processing-in-the-advanced-adapter-engine-using-pi-71/technology/sap/494/
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20c237f1-3caf-2b10-3a83-cce9ed5fbdf3?
QuickLink=index&overridelayout=true
You can use sender uses a virtual receiver while creation of sender agreement then you need not make separete receiver determination and interface determination , in case of B2B scenarios try that option as well
let me know if it works or not
Regards
Ninad
Edited by: Ninad Sane on Oct 20, 2010 8:36 AM
Edited by: Ninad Sane on Oct 20, 2010 10:54 AM

ALE/IDOC and RFC/BAPI Integration Scenarios with SAP DS for ESA v3

Hi,
we are planning two PoCs of Integration Plattforms. One of our major requirement set is SAP Integration into our existing SOA.
Because we also have R/3 4.7 Systems in production, we are planning to test ALE/IDOC and RFC/BAPI Integration scenarios with these Integration Plattforms.
My question is:
We are looking for are smart solution to get a SAP Test Environment, where we can test ALE/IDOC und RFC/BAPI Integration scenarios.
It is possible to do this with SAP DS for ESA v3 or shall we better use IDES for that purpose?
Best regards,
Steven

Hi Abhishek,
This is our scenario. We are doing an integration of SAP HR r/3 system with the CRM system. We need housing information details of the employees which we have in custom infotype 9310 in SAP HR system and we need those details in the CRM system. So am planning out for an ALE/IDOC approach for the integration and gonna maintain the 9310 details in a custom table. In the CRM system, we gonna build a BOL layer for accessing the 9310 details. Also i'm preparing a HLD for this process. I wanna read and go through few same HLD's before i submit my proposal to my client. Please suggest me and help me out.
Thanks in advance.
Regards,
Arunmozhi.

Unable to insert internal actions in process integration scenario

Hi, experts!
Can anybody please help me insert an action in my process integration scenario? I have created and activated actions that are internal (for own SWCV type of usage) but when I try to insert them in the scenario, I can only choose actions that have action class = external for that SWCV. Any idea what keeps the internal actions from appearing? Thanks in advance.
regards,
brent

but when I try to insert them in the scenario, I can only choose actions that have action class = external for that SWCV
Are you sure that you have followed the norm mentioned in this help page:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/68/88a440df800160e10000000a1550b0/content.htm
SAP Help:
Defined for a u2018separateu2019 software component version.
You can use internal actions in application components (of type Product Version or Main Instance) that (by using the product version) contain the same software component version in which the action is implemented.

How to create Process Integration in SLD

Hello colleagues,
I need create Process Integration in SLD my version is PI 7.4.
In development system I have create this process
How to create in production?
Thanks.

Hi Victor,
you can create the SLD objects in DEV and transport the same in to Quality and PROD systems.
check the below blog.
http://scn.sap.com/people/daniel.graversen/blog/2012/03/11/sld-setup-and-transport-for-sap-pi
http://help.sap.com/saphelp_nw70/helpdata/en/f1/92b248db68409487661ff13239127d/frameset.htm
You can check this blog for the general SLD setup recommendation of SAP:
http://scn.sap.com/people/boris.zarske/blog/2008/03/21/sld-general-recommendation-how-to-set-up-the-system-landscape-directory
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Regards
Srinivas

Configuring Process Integration Scenarios for Advanced Adapter Engine

Hello @all,
i've an asynchronous SOAP scenario and would like to configure an integrated configuration for Advanced Adapter Engine using a process integration scenario. In the documentation (Link below) it is described, that you can select local communication using AAE in the model configurator, but I couldn't find any hint. Any idea?
Documentation:
http://help.sap.com/saphelp_nw73/helpdata/en/48/ce987b18d3424be10000000a421937/content.htm
Thanks and kind regards
Andreas

Hi,
Use thse links:
Advanced Adapter Engine Configuration in PI 7.1
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/700058f0-b1a1-2a10-39a8-ab2627b87cfa?QuickLink=index&overridelayout=true&47047071760975
Sreeni.

File to File Scenario with Secure Connection. Pls help urgent

Hello All,
I tried a lot to get a link/blog that expalin full scenario
for File to File Scenario with Secure Connection
Kindly let me know if somebody have link/doc for it
that describe all the steps to do configuring this scenario.
What is difference in simple words between
FTPS and SFTP.
Pls help it is urgent as I require for Project work urgently.
Regards

hi rich
go through these links
FTPs connection failed - error ".. certificate rejected by ChainVerifier"
Re: What is SFTP, FTI channels
http://help.sap.com/saphelp_erp2005/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm
FTPS implementation question.
http://help.sap.com/saphelp_nw04s/helpdata/en/43/0e16bfd7b021aee10000000a1553f6/frameset.htm
Server certificate rejected by ChainVerifier:FTPS server(Points Guaranteed)
/people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi
File adapter
thanks
Kunaal

More integration scenarios with the same business system in Int. Direct.?

Hi guys!
I need to integrate 5 business systems. I tried to create more integration scenarios (to do it clearly), but it is not possible to add already added business system to any other scenario...
What's the logic of this?
Can someone explain me it? Or some link?
Thanx Peter

hi Peter,
have you tried:
service without party ->
right click on your business system ->
add to scenario?
like this you can add your business system
to as many scenarios as you wish
Regards,
michal

Difference between Process integration scenario and configuration scenario.

Hi,
Please tell me what is difference between Process integration scenarion and configuration scenarion in SAP PI.
Is Process integration scenario is BPM concept? also what is the advantages over configuration scenario.
Regards,
Manigandan

Hi Manigandan,
Speaking widely:
Process integration scenario: there is a ccBPM, like the workflow in ABAP, even when you one inside the PI it's generated a workflow in the ABAP stuck
Configuration scenario: it is object to link the integration directory and the esr/IR when you define the logic of your implementation. It isnt mandatory, but you can organize better you develoments if you make an scenario for a "real scenario" like a file to soap integration, you can define it like a configuration scenario.
Regards.

Integration Scenario with Oracle SOA Suite and SAP

Hi to all
I have the following integration scenario:
The customer have some applications in the integration landscape. All of this applications are integrated with Oracle Soa Suite.
This customer, want to buy SAP ERP (ECC 6.0), and they want to integrate SAP ECC in their infrastructure.
I told to them, that is necesary have Process Integration (PI), by have a services oriented architecture.
But, I want to hear options, possibilities and comments. Where I find information related ?
Thank you very much
Dario

Hi Rodriguez ,
you can use Oracle AS Adapter for SAP for integrating SAP system to oracle .
some step you need to do in SAP ECC side for data transfer - like create TCP/IP RFC connection ,
for TCP/IP RFC config. you can generate program ID in Oracle AS Adapter ..Also Oracle provides a SAP JRFC library for integrating SAP system .
you can find more information in given link -
http://www.oracle.com/technology/products/integration/adapters/dev_support.html
Regards,
Amit Shivhare

How do I create an Integration Domain with 3 servers ?

Hi,
I would like to create a WLI domain with three servers: 
Ã˜ One for the administration console; 
Ã˜ One for WLI; 
Ã˜ And the last to deploy EJB Session (which are the service called by WLI) 
To create the domain, I use the WLI 8.1 SP4 Configuration Wizard. 
After creating the domain with 3 services, I have not succeeded to start the WLI Server. 
For another test, I would like to create a WLI domain with two servers: 
Ã˜ One for the administration console and WLI; 
Ã˜ And the last to deploy EJB Session 
To create the main server, I have used the configuration wizard. For the other, I have used the console administration. With this configuration, the message brocker was not initialised. 
For the last test, I have created a domain with single server and I had no errors. 
So, my question is: What is the method to create a domain with three servers? 
Thanks for your help 
Case 1: Test to define 3 servers
<4 nov. 2005 14 h 45 CET> <Notice> <WebLogicServer> <BEA-000328> <Starting WebLogic Managed Server "etsoWLI" for domain "complexDomain">
The WebLogic Server did not start up properly.
weblogic.management.AbortDeploymentException: weblogic.t3.srvr.FatalStartupException: Can't start server due to startup class failure WLI Startup Class - with nested exception:
[com.bea.wli.management.BPMComponentInitializationException: Failed to initialize ProcessConfiguration module]
at weblogic.t3.srvr.StartupClassService.addDeployment(StartupClassService.java:92)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:337)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:597)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:575)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:754)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:733)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:509)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1560)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1528)
at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeanServerImpl.java:988)
at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:946)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:954)
at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.java:481)
at weblogic.management.configuration.ServerMBean_Stub.updateDeployments(ServerMBean_Stub.java:7691)
at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(SlaveDeployer.java:1304)
at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:347)
at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:229)
at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:966)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
at weblogic.Server.main(Server.java:32)
Reason: [Deployer:149601]The deployment framework was unable to resume accepting requests.weblogic.t3.srvr.FatalStartupException: Can't start server due to startup class failure WLI Startup Class - with nested exception:
[com.bea.wli.management.BPMComponentInitializationException: Failed to initialize ProcessConfiguration module]
<4 nov. 2005 14 h 45 CET> <Emergency> <WebLogicServer> <BEA-000342> <Unable to initialize the server: [Deployer:149601]The deployment framework was unable to resume accepting requests.weblogic.t3.srvr.FatalStartupException: Can't start server due to startup class failure WLI Startup Class - with nested exception:
[com.bea.wli.management.BPMComponentInitializationException: Failed to initialize ProcessConfiguration module]>
 
Case 2 : Test to define 2 servers 
<4 nov. 2005 15 h 03 CET> <Error> <WLI-Core> <BEA-484037> <Process Tracking failed to initialize properly. Tracking data cannot be recorded for process typ
e "/MailProcess/processes/process02.jpd".>
<4 nov. 2005 15 h 03 CET> <Error> <WLI-Core> <BEA-481000> <The Message Broker is not initialized>
<4 nov. 2005 15 h 03 CET> <Error> <WLW> <000000> <Failed to register subscriptions for JPD /MailProcess/processes/process02.jpd
java.lang.RuntimeException: The Message Broker is not initialized
at com.bea.wli.broker.MessageBroker.getMessageBroker(MessageBroker.java:277)
at com.bea.wli.control.MBUtils.registerSubscriptionRules(MBUtils.java:99)
at com.bea.wli.bpm.runtime.JpdDispFile$3.run(JpdDispFile.java:903)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at com.bea.wli.bpm.runtime.JpdDispFile.registerSubscriptions(JpdDispFile.java:912)
at com.bea.wli.bpm.runtime.JpdDispFile.<init>(JpdDispFile.java:212)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at com.bea.wlw.runtime.core.dispatcher.DispUnit.loadDispFile(DispUnit.java:219)
at com.bea.wlw.runtime.core.dispatcher.DispUnit.<init>(DispUnit.java:153)
at com.bea.wlw.runtime.core.dispatcher.DispCache.ensureDispUnit(DispCache.java:578)
at com.bea.wlw.runtime.core.dispatcher.HttpServerHelper.getDispUnit(HttpServerHelper.java:501)
at com.bea.wlw.runtime.core.dispatcher.HttpServerHelper.executeGetRequest(HttpServerHelper.java:541)
at com.bea.wlw.runtime.core.dispatcher.HttpServer.doGet(HttpServer.java:81)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6718)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
>
javax.management.InstanceNotFoundException: lastEtsoDomain:Location=etsoMain,Name=MsgBroker,Type=MsgBrokerRuntime (admin server:true)
at weblogic.management.internal.MBeanHomeImpl.getMBean_helper(MBeanHomeImpl.java:145)
at weblogic.management.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.java:130)
at weblogic.management.internal.MBeanHomeImpl.getRuntimeMBean(MBeanHomeImpl.java:557)
at weblogic.management.internal.MBeanHomeImpl.getRuntimeMBean(MBeanHomeImpl.java:549)
at weblogic.management.internal.AdminMBeanHomeImpl.getRuntimeMBean(AdminMBeanHomeImpl.java:580)
at com.bea.wli.management.MBeanHelper.getMsgBrokerRuntimeMBean(MBeanHelper.java:549)
at com.bea.wli.bpm.runtime.__broker.listSubscriptions(__broker.java:178)
at com.bea.wli.bpm.runtime.__broker._jspService(__broker.java:833)
at com.bea.wlw.runtime.core.dispatcher.ServiceView.dispatchToPage(ServiceView.java:269)
at com.bea.wlw.runtime.core.dispatcher.ServiceView.forward(ServiceView.java:438)
at com.bea.wlw.runtime.core.dispatcher.HttpServerHelper.executeGetRequest(HttpServerHelper.java:617)
at com.bea.wlw.runtime.core.dispatcher.HttpServer.doGet(HttpServer.java:81)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6718)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)

To use 3 managed servers with Weblogic, I must a cluster environment.
Weblogic say: "WebLogic Integration domain that includes an administrative server and one or more managed servers must include a cluster. A WebLogic Integration domain that includes an administrative server and one or more managed servers without a cluster is an unsupported configuration."
Fred

Customer specific codelists in integration scenario with CRM onPrem

Hi,
we are working on an integration scenario C4C <> CRM onPrem. The businesspartner masterdata should be editable in C4C and CRM.
We have several customer specific fields on the businesspartner in both systems.
In CRM we have implemented customizing for the values of these fields via customizingtables that can be maintained with TX:SM30.
We can also create finetuning-activities for the maintenance of the code lists for these fields in C4C.
As these customizingtables can have around 1.000 entries per table we are searching for a solution to maintain the values just in CRM instead of maintaining them twice.
Does anybody has an idea how to replicate customer specific codelist-values from CRM into C4C? Or maybe a valuehelp in C4C that retrieves the values via webservice from CRM?
Thanks
Danny

Hi Danny,
We have requirement like get all Oper Order based on Account from ECC to cloud and we have successfully achieved using External Web Service Integration.
We have consume ECC web service integration and retrieve all Open orders based on Account ID and display in the table.
So as per my knowledge you can read all value using web service call and maintained in custom OVS ( I have never tried ).
You need to check whether is it possible or not using custom OVS but if it is working for table than it may be work for custom OVS as well.
Please check this post below may be helpful to you
SAP Cloud SDK : Bi-directional Custom Web-service Integration with PI
Regards,
Mithun

Building an Integration scenario with the Foundation Pack

From what I can see most people use AIA so they can make use of the available PIPS.
Has anybody used just the AIA Foundation pack to build integration scenarios?
We are experiencing many problems just trying to develope a simple end to end process and wondered if anyone had a simple Do's and DOn'ts, or Step by step guide to developing a scenario.
There is a lot of documentation and its very difficult to find the relevant information as it seems to be spread across multiple docs.
Stuart

We have made some small progress using the Foundation Pack 2.3.
I thought i'd share some of my experiences for others who are having problems and finding it difficult to get info.
We used the Artifcat Generater which creates the ABCS (BPEL process).
We found several issue:
1. In ABCS Requester (which calls an EBS implemented as an ESB process) - Partner Links did not work. We were getting Invalid Port Type errors (i will post the error message when i'm back in the office), but on close inspection everything looked ok but just did not work. The simple work around was to delete the Partner Link and re-enter it manually. I wasted days investigating this problem and ended up creating my own test BPEL process calling the EBS to prove it was configured correctly.
2. The XSL stylesheets could not be tested in JDEV. We ended up commenting out many of the generated XSL templates (generated by the Artifact Generater), the main culprit seems to be GetSenderNode template, haven't got to the bottom of the issue but ended up commenting out much of the code, specifically the aia.Getxxxxxx functions. Once I get time and find more information i'll post my findings.
Good luck.

Creating Process Integration Scenario with synchronous connections

Similar Messages

Maybe you are looking for