Creating Quantity only transaction without effecting any GL account balance

Hello,
Can anybody please let me know how I can create inventory without effecting ay GL
account balances? I thought Intial Quantities transaction under
Inventory transaction module should do it but that is impacting GL
accounts. If we create a GoodsOrder PO, inventory will be added but it
impacts a couple of GL account balances as well. But I donot want GL
account balances to ge impacted.
Please help!!
Best regards,
Sudha

Hi Samudrikam Sudha
It can not be done. When doing anything inside SBO through DTW or Front end or DI API. When you add a document you are actual "posting a transaction". When I use the word "posting" it means it has a financila impact.
That is the way SAP Business One works. What are you trying to achieve?? Surely you are aware stock can not increase without increasing your stock account. If it didn't then how would the moving average (cost price) of the item match back to the stock account???
Hope the above helps

Similar Messages

Document currency (Transaction currency) wise G/L account balance report.

Dear All,
Is there any report available in FI for Document currency (Transaction currency) wise G/L account balance display.
Something similar to S_ALR_87012277; which gives currency-wise balance display?
Thank you for help.
Regards
Vijay

Hi Mike
Thank you for your quick responce.
I don't have access to this S_PLO_........ tcode; Ours is ECC 5.0 installation.
Is any other report available.
Thank you
Vijay

Getting Error while saving a transaction without making any changes to it.

Hi All,
I have a page where in the advance table I add few rows and save the transaction. First time when I save it everything works fine, but when I save it again without making any changes to the fields I get following error:
"Unable to perform transaction on the record. \nCause: The record has been deleted by another user. \nAction: Cancel the transaction and re-query the records to get the new data."
In the same page if I make any changes again it allows me to save the transaction.
Please guide how we can avoid it..
I have already checked many threads related to the issue but nothing has worked. Please help!!
Any help would be highly appreciated..
Regards,
Nisheeth

Hi All,
please help!!

Can I create an HCM Form without involving any workflow steps?

Hi Experts,
Can I create an HCM Form without the involvement of any Workflow steps ? I tried to create a simple form to save the User id( IT0105) of a person. I tried to simulate the process through program RPASR_TEST_PROCESS_EXECUTION. But, finally it failed saying "No workflow assingned. Process not successfully completed" . How should I proceed if I dont want any workflow steps to be included?
I just want the form to update the infotypes directly when I save.
Pls advice,
Thanks in advance!
Mahesh

Yes. This is undocumented for some reason (I learned it from SAP folks! haha). Set the workflow to:
NO_WORKFLOW
You're welcome. haha

How can I use in app purchase without credit card using account balance

How can I use in app purchase without credit card using account balance

Hi Kaijinfromtx,
Thanks for visiting Apple Support Communities.
When you make an In App Purchase, the iTunes Store should use any gift balance or account credit first. You may still be asked to verify the payment information on your account before completing the purchase.
You can find more information about iTunes Store billing in these articles:
iTunes Store: How iTunes Store purchases are billed
http://support.apple.com/kb/HT5582
iTunes Store: iTunes Gift balances
http://support.apple.com/kb/ht5035
Best,
Jeremy

Why does TopLink roll back transactions without displaying any error?

I am trying to do bulk inserts via a stored procedure that takes in a VARRAY of varchars (complete insert statements). Becuase of integrity constraint, the stored procedure can only be executed after the parent record has been inserted via registerObject. I have created a new class that implements the SessionEventListener and put the logic to call the stored procedure under prepareUnitOfWork. I then put the listener in the event manager. The whole transaction would go through, but in the end TopLink would rollback the transaction for no apparent reason. I do not see any exceptions or errors, and from the database side my DBA has created a test_log table that will track the statements I passed in, and they all look fine. Has anyone encountered similar problems before?

This is the current setting for Session.xml
<logging-options>
<log-debug>true</log-debug>
<log-exceptions>true</log-exceptions>
<log-exception-stacktrace>true</log-exception-stacktrace>
<print-thread>true</print-thread>
<print-session>true</print-session>
<print-connection>true</print-connection>
<print-date>true</print-date>
</logging-options>

How do I create a new ID without losing any accumulated information?

Hi,
My wife has an iphone 4 and an ipad and I have an iphone 4S but it is all on one Apple ID. I want to separate her onto her own ID. Is there any downside to doing this?
How do I go about doing it?
Do I or does she lose access to any information, songs, movies, emails etc by doing this?
Any help much appreciated.
All the best,
Mick

Thanks ...I have just realised how much of a tech moron I am.
Could you possibly decipher what the best solution for me is:
I have two iphones and an ipad on one account
i want to separate one iphone and an ipad onto a new account
I dont want to lose anything, just the usual stuff - songs, movies, apps, kids stuff when i do it
i am not on the cloud, just household use, emails text, calls, etc
That tutorial sounds helpful and gives five options but Please...what is the right solution for me given all this? How do i do it?
appreciate your understanding.

I have an iPad and and iPhone. They share an iCloud and I want separate iCloud accounts. How do I create a new account without losing any information? I want to keep the original account on one device.

I have an iPad and an iPhone that share an iCloud account. I didn't realize when I got my iPad last year that when I signed up the iCloud on the device that it would share and use 5g of iCloud between the both of them. How do I unsync them and have two separate iCloud accounts? I don't care about sharing between them. When my kids put games on my iPad, I don't want them going on my phone. How do I create a new iCloud without losing any info on the other device?

Hi sugaliko,
You may need to set up your BlueTooth connection to the keyboard again. Use the steps in this article for guidance -
iOS: Third-party Bluetooth accessories
http://support.apple.com/kb/HT1664
Thanks for using Apple Support Communities.
Best,
Brett L

How to create SAP_ALL Display Role without HR Transactions.

Hi,
Can someone help mem create an SAP_ALL Display only Role without HR Transactions.
It takes lot of time to create a New role with SAP_ALL Template and manually change the Activity to display and de-activate HR Objects.
Please let me know if there is any faster way to do this.
Regards,
MASQ.

> Please let me know if there is any faster way to do this.
Nope, there isn't. Besides that, only changing activity fields will not result in a display-only role. As said, please use the search and browse through the sticky threads.

I think I have opened the sobig.f virus in my hotmail account and it keeps seding emails to my contacts. How do I stop it, and will it effect any of my other transactions like internet banking/shopping, is it safe?

I think I have opened the sobig.f virus in my hotmail account and it keeps seding emails to my contacts. How do I stop it, and will it effect any of my other transactions like internet banking/shopping, is it safe To continue using my ipad ?

This isn't due to malware. There is no known malware capable of infecting an iPad that has not been jailbroken (ie, hacked to allow apps from outside the App Store).
As lizdance40 says, your Hotmail account has been hacked remotely. Change the password immediately. Hotmail accounts are popular targets, but as long as you choose a good password, and make sure that password is not the same as a password you use with any other account, you should be safe.
I disagree with lizdance40's statement that you have to abandon the account and create a new e-mail address. If a hacker is able to get back in even after changing the password, the problem is not with the account itself. There's another vulnerability of some kind somewhere. Perhaps the account allows hackers to leave a "back door" to get back in (such as with GMail's delegation feature), in which case any such feature needs to be reviewed and have settings changed. Perhaps you are checking mail in an insecure manner while on an insecure network (ie, a wireless network that requires no password). Perhaps you are using a password on multiple accounts, and a different account has been compromised. Perhaps a hacker has used knowledge gained by prior access to your account to achieve "social hacking" (ie, convincing a tech to give him access because he has "forgotten the password"). There are many scenarios, but there's no good reason to abandon the account entirely.

Is there any way to create a HTTP_AAE Receiver without a path in NW PO 7.31

Hi ,
Does anyone know how to create a HTTP_AAE Receiver without a path??
We are in a phase of migrating Interfaces from PI 7.1 to PO 7.31(Java Only).
For one of the Interface in PI 7.1 there is a RFC Destination for vendor communication through HTTPS connectivity :
TargetHost: IP Address
Post: value
Path Prefix: Blank
During migration requirment is to keep the Path field BLANK of the Communication Channel,however since PO has mandatory path field a "/" is been provided, because of which data post fails.
PI: https://IP:9443
PO: https://IP:9443/ (Since Path Prefix is mandatory)
As per my understanding The data is supposted to be posted directly to the IP (https://IP:9443) however it is getting posted to (https://IP:9443/) where the service is not available. For Reference attached relevant screenshots.
Is there any way to create a HTTP_AAE Receiver without a path. Need ardent support and suggestions
regarding this.
Regards
Riju

Hi,
For Service auto- PO from PR, you need to activate Automatic Purchase order creation for Service requisitions in ML91 t.code.
Note:
For material :automatic PO creation from PR, follow the steps.
1) Material Master purchasing view tick automatic PO check box
2) Vendor Master purchasing view tick automatic PO check box.
3) Maintain Source list for Vendor & Material.(ME01)
4) Maintain Purchase Info Record.(ME11)
5) Create a Purchase Requisition.(ME51)
6) Use T.Code: ME59 & execute for PR for vendor, you will be able to create automatic PO.
During creation of PR , select check box of Source Determination in the 1st screen of ME51
Ensure that Purchase Info Record should be there.
If you have more than one vendor then fixes only one vendor in source list.
Regards,
Biju K

I duplicated a picture and now iPhoto (11) is cloning that picture replacing all the other photos and only when I click directly on them I can see the real picture! How can I solve the problem without losing any saved picture? Shall I re-install? Thanx

I duplicated a picture selecting CMD and D but, suddenly, iPhoto (latest version '11) started cloning that picture and replacing all the other photos with it.
Only when I click directly on one photo I can open it and see the real picture it is.
But the preview is always the duplicated one...
I tryed to duplicate another picture just to see if it turned out ok but the only changement was the duplicated picture!
I started repeating the second duplicated one instead of the previous one but my issue remained the same.
So, how can you help me to solve this problem without losing any saved picture?
Shall I re-install iPhoto completely?
Thank you very very much in advance!!

As Larry says, restoring the back up is the fastest and best solution. Otherwise:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

How to create a new aspx page in Pages library using Elements.xml without including any aspx page layout in my feature?

Is it possible to have the elements.xml file create a page in the Pages (or SitePages) library without actually including any sort of page layout or aspx artifact in the feature?
I see no reason to add a mywebpartlayout.aspx to my feature just so I can deploy a Home.aspx based on the BlankWebPart.aspx page layout.
I'm sure there is something obvious I am missing with regards to the Elements schema (which is why I've almost given up on using it completely and just gone to pure C#) but
I would really like to do this kind of simple stuff with declarations if at all possible. Must less code to write, debug, test and maintain.

I don't see how my question keeps getting misunderstood. This seems to be very clear and clearly not answered: "Is it possible to have the Elements.xml file
create a page in the Pages (or SitePages) library without actually including any sort of page layout or aspx artifact in the feature?"
I can't be more clear than "without including ANY sort of page layout or aspx artifact (meaning anything ending in aspx) IN THE FEATURE". I am not capitalizing to yell,
only to emphasize. Your disagreement is based on a link that shows ADDING AN ARTIFACT (the dummy MyPage.aspx) to a feature. I am asking if it
is possible (again, I cannot be more clear) to just use an Elements.xml file to instruct SharePoint to make a new item in a Pages or SitePages library.
Your definition of page includes Page Layouts and what you call Web Part Pages (again, a type of page layout + data in a site pages list that says what webparts
to display). Page Layouts are clearly NOT items stored inside of a SitePages or Publishing Pages library. Those libraries are just lists whose records
define the parts to show inside a specific layout.
When I refer to a Page I mean an entry into a pages (site pages/publishing pages) list. If I wanted to deploy a page layout then, quite obviously, I would need
to include it into my solution. I think maybe you are assuming that I do not know the difference. I do. The question is, can an Elements file alone be enough to instruct SharePoint to make a new entry into a Pages or SitePages library.
Now, your second link does show how to reference an existing Page Layout. Thank you for that. It is excellent. But this still leaves the problem of having to
add some sort of aspx page into the solution. Let me try to explain why I feel this SHOULD BE unnecessary: The aspx file will not have anything on it if I am referring to the ~sitecollections/.../BlankWebPartPage.aspx layout.
All web parts and content that should appear on the new page can be described IN the Elements.xml file. Any sort of aspx file is unnecessary, it seems to me.
So, if I am referencing a ~sitecollections/.../BlankWebPartPage.aspx page layout and specifying the web parts to add to the page, why should there be a
requirement to have some aspx file within the feature? That's what I am trying to figure out.
I am not asking for source code as proof. I am asking for an Elements file that does NOT reference anything AT ALL inside the Visual Studio solution for reasons I just described.
If you do not know how to do it then perhaps it cannot be done but I would like the question to stay unanswered for a little while until someone can demonstrate either a) it CAN
be done or b) a link to some Microsoft document stating that it is MANDATORY to have a physical element within the feature that gets copied to the environment.
I think it is important to understand what is being asked before insisting you have answered. It is clear from your posts that you have not fully understood the question yet but
I am hoping this posts makes it clear. I really appreciate you taking the time to respond, though. You seem to be the only one up for the challenge! :)

How to create inspection lot manually without using QA01 Transaction code?

Hi,
Please anybody give procedure for creating Inspection Lot Manually without using Transaction Code QA01

Hello, Srinivas,
If you want another T code only then you can try QA01A.
or you can create a Physical Sample with QPR1 and then click on the button there to create inspection lot. To create inspection lot for that Physical sample (you will able to see that button only after releasing the sample) Or you can use QPR5.
But let me know the reason why you want T code other than QA01.
Regards,
Shyamal

Call an MM transaction without creating a new LUW

Hello Experts,
I have created a new Z_ transaction in which I want to call an existing Materials Management
transaction (MB1B). Additionally, in my transaction I update some extra custom (z_) tables. I would like to have one LUW so as to perform all updates (both custom tables and SAP tables updated by the MM transaction) together at the final "commit work" in my program.
Is there a way to call the MM transaction without creating a new LUW in my calling program (as the CALL TRANSACTION statement does)?
I have read that one way is to use the CALL DIALOG statement instead. Is it a safe method to use?
Please give as much detailed info (with examples) as possible.
Thank you very much in advance,
Orestis

Hi Sandra,
My requirement is to call a transacton in a subscreen. Created a screen 100 that is devided into 2 one for custom container to place tree control and another for subscreen that is to call transaction.
Call transaction works fine, but this transaction is being opened in new screen(as each transaction use new LUW)., is there any to display the transaction in the sub screen area instead of new screen..
For ex, very similar to t-code SE80. In se80, choose other object, and choose more, and select trasaction and enter any t-code, then it displays same of SE93 in the right side of the screen...hope it is clear..
Regards, Laks

Creating Quantity only transaction without effecting any GL account balance

Similar Messages

Maybe you are looking for