Creating quick links from overview in ESS

Hi all,
how do i create a quick link in the overview menu linking to leave request from the WORKING TIME category?
Thanks!

Hi Wein
I assume that u r using ERP2004,
In R3 ECC 5.0
SPRO->IMG->cross-application components->HOMEPAGE Framework->Services->define services->define services(add entry)
find out following service key
EMPLOYEE_WORKTIME_LEAVEREQUEST
double click to open it.
check the box Quick Link
Save ur entries. a warning ocurrs. press enter.
relese the request.
restars the j2ee server.
regards,
kaushal

Similar Messages

Help Please - having difficulties creating af link from the text to an attached file i acrobat

I have been reading the help, but it just wonn't work when I try.
I have tried as followed (I am working with a danish version, and hope to matched the same word as in the english version of Acrobat Xpro):
1. From the toolbox i choose content and then 'hyperlink'
2. I mark the text from which i wish to make a link
3. Acrobat respond with an popup picture 'create a link'
4. From the popup I mark 'Open a side' and push 'next'
5. Acrobat respond with a new popup picture 'create / go to a side'
6. I go to the navigator and open the list with attached file's that I have embedded in my acrobat file.
7. I mark the to which i wish to make a link to
8. In the popup 'create / go to a side' that stilll is open, i push 'Mark hyperlink'
Then I hoped that I have created a link from the acrobat text to the attached file. In stead Acrobat has made a link to the same sidenumber that respond to the text from which i wish to make a link . F.ex. the linktext is on side 10 - then the link goes to side 10.
How do i do it right?
Please help.

Hello Bernd
Thanks for a quick respond.
This corresponds to the text I have tried myself, but apparently I do something wrong
1.      Open a PDF that contains a PDF file attachment – done
2.      Go to where you want to create a link. If that location is in the file attachment, click the Attachments button in the navigation pane, select the file attachment, and click open.
Here I go to side number 10 from which I wish to make a link from (I am not open the attachment file at this moment, as the location not is inside the file attachment).
(I earlier also tried to mark the attachment file and click open, and It result that the attached file just opened normally without creating a link to the file).
3.      Choose Tools > Content > link, and select the area for the link
Here I mark the text on side 10 from which I wish to make a link to a attached file
4.      In the Create Link dialog box, set the link appearance, select Go To A Page View, and then click Next
Here I have selected ‘Go to a page view’ as told and I click Next
5.      Set the page number and view magnification you want, either in the parent PDF document or in the file attachment, and then click set link.
Here I go to the navigation pane and mark the attached file from the file list (the files in the list hasn’t any side number in the list) and then I click Set Link.
Then I hoped that I have created a link from the acrobat text to the attached file. In stead Acrobat has made a link to the same sidenumber that respond to the text from which i wish to make a link . F.ex. the linktext is on side 10 - then the link goes to side 10.
What do I do wrong.?
Med venlig hilsen
Mogens Pedersen
Specialkonsulent
T 33 63 13 07
F 33 63 10 11
[email protected]<mailto:[email protected]>
Fra: Bernd Alheit [email protected]
Sendt: 2. marts 2012 13:11
Til: Mogens Pedersen
Emne: Help Please - having difficulties creating af link from the text to an attached file i acrobat
Re: Help Please - having difficulties creating af link from the text to an attached file i acrobat
created by Bernd Alheit<http://forums.adobe.com/people/Bernd+Alheit> in Creating, Editing & Exporting PDFs - View the full discussion<http://forums.adobe.com/message/4241290#4241290

Creating tabs in Appraisals Overview Page(ESS/MSS) -Status Overview

Hi,
We have two types of Appraisal documents in system.
One is normal Appraisal document and another is Talent Competency Assessment document.
We are thinking to keep these two appraisal documents apart and away from each other.
By creating the two Status Overview in ESS/MSS overview Page and controlled via PRogram to what documents appear in Status Overview Page.
Can anybody suggest is ther any way around it to display two kinds of Appraisal documents separately.
I tried this configuration in MSS,but it is not working.
Regards
Rizwan S

Dear Siddarth,
Thanks for the Previous Answer.
Can I make the Zcopy of the Appraisals Page/Appraisals Application and use it for another type of Appraisal documents .
1.Standard Appraisals Page for Standard Perfroamnce appraisals,
2.Zappraisals Page for Competency Appraisals.
Can you please tell me what are development efforts?
What things to be copied to acheive this?
Regards
Rizwan S

How can I create a link from a CHM file to a webhelp file?

How can I create a link from a CHM file to a webhelp file?
The CHM output (accreditation.chm) is stored in a parent directory, and the webhelp output (index.htm) is stored in a child directory.

Open the usual Link dialog and enter the relative path from where the CHM will be installed to where the webhelp will be installed.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How do I add or delete a quick link from Firefox's home page.

How do I add or delete a quick link from Firefox's home page. I don't use most of the links and would like to add other quick links.

You can change the order of the boxes on the about:newtab page and drag an item to a different slot to pin it to that position or you can remove a website by clicking the close X to block that URL.<br />
You can drag a bookmark or history item and drop them in a slot on the about:newtab page to pin them and have your own favorites sites showing.
Changes made manually on the about:newtab page are stored in the browser.newtabpage.pinned (default = [null]) and browser.newtabpage.blocked prefs that you can check/modify on the about:config page (Bug 791447).
*http://kb.mozillazine.org/about:config
See also this article about the New Tab page (about:newtab):
*https://support.mozilla.org/kb/new-tab-page-show-hide-and-customize-top-sites

How to create database link from oracle to sql server

Please help with how to create database link from oracle to sql server
Best regards,
Vishal

Please help with how to create database link from oracle to sql server
Best regards,
Vishal
Hi Vishal,
I found a lof of information regarding how to create a database link from Oracle to SQL Server, please see:
https://www.google.co.in/?gws_rd=cr&ei=vd3XUvGFO8TgkAXqlYCADg#q=how+to+create+database+link+from+oracle+to+sql+server
We discuss SQL Server related issue in this forum. If you have any more question regarding Oracle, please post it in Oracle communities forum for better support.
Regards,
Elvis Long
TechNet Community Support

Creating multiple links from one map image in Flash CS4

I have been tasked with creating multiple links from one map image using flash. Each link would go to the main website page with that location. I assume I could create a button for each location on the map but not having a lot of experience any help / tutorial you know of would be super helpful.. Thanks! Not looking for someone to work me thru it but a little guidance would be great!

If I was to answer the problem, I would be giving you what you asked not to be given... the solution. So I'll suggest that you start by researching the getURL() function. That is what AS2 uses for opening web pages.
As for coding a button, I'll recommend the following article for you... it will explain the proper approach to coding a button, which will give you an advantage over others who don't follow it, but instead use the way the article says not to.
http://www.adobe.com/devnet/flash/articles/as_bestpractices_04.html
Google is one of the best resources available for learning how to do things with Flash--it's the first place I go when I have a wondering. In general, if you type in the right keywords, you get fairly good search results. In your case, combinations of "AS2", "button", "getURL", "tutorial" would probably work well.

Contact Form: How do i create a link from an XML file to another domain to read a PHP File

So i purchased a template from Template Monster and im having a little trouble with the contact form. The server that im uploading it to is a privite server that the company owns. It supports ASP and not PHP. I cant seem to get the ASP form to work so all i want to do it create a link to another one of there servers that supports PHP and have the contact form link to there and read the PHP file (that i will upload to that server) and send the email from there.
This is the XML that i have to fill in in order to make it work
Everything in Red is what i needed to fill out in order for the form to work.
<?xml version="1.0" encoding="utf-8"?>

<contactFormConfiguration>
    
    <emailTo>[email protected]</emailTo>
    
    <serverProcessorType>php</serverProcessorType>
    
    <serverProcessorFileName>contact</serverProcessorFileName>
    
    <validateRequiredOnly>false</validateRequiredOnly>
    
    <submitFormOnEnter>false</submitFormOnEnter>
    
    <messageSentText>Thank you for your message.</messageSentText>
    
    <messageSentFailedText>Sorry, your message couldn't be sent</messageSentFailedText>
    
    <formProcessingText>processing...</formProcessingText>
    
    <smtpServer>localhost</smtpServer>
    
    <smtpPort>25</smtpPort>
    
    <plainText>false</plainText>
    
    <emailFromSource>2</emailFromSource>
    
    <subjectSource>Contact Form from your site</subjectSource>
    
    <validationErrorMessages>
        
        <message type="fieldIsRequired">{LABEL} is required.</message>
        
        <message type="emailNotValid">{LABEL} - is not valid email address.</message>
        
        <message type="minCharsLimitError">{LABEL} - The specified number of characters in a field is less than a required minimum.</message>
        
        <message type="reqExpError">{LABEL} - The specified string does not match with the regular expression.</message>
        
        <message type="biggerThanMaxError">{LABEL} - The specified number is greater than an acceptable biggest number for this field.</message>
        
        <message type="lowerThanMinError">{LABEL} - The specified number is lower than an acceptable lowest number for this field.</message>
        
        <message type="notANumberError">{LABEL} - The data is not a number.</message>
        
        <message type="negativeError">{LABEL} - The specified number must not be negative.</message>
        
        <message type="minRequirementError">{LABEL} - The minimum number of variants is not selected</message>
        
        <message type="maxRequirementError">{LABEL} - The number of variants selected exceeds the maximum</message>
        
        <message type="shouldBeEqualError">{LABEL} - values do not match</message>
        
        <message type="dateIsNotValidError">{LABEL} - date has wrong format</message>
    </validationErrorMessages>
</contactFormConfiguration>
THIS IS THE ACTUAL CONTACT.PHP Form That i would like to link to.
<?php
//-----------------Getting data sent by flash---------------------
foreach ($_POST as $key => $value){
        if ($key != 'mail_to' && $key != 'smtp_server' && $key != 'smtp_port' && $key != 'mail_from' && $key != 'mail_subject' && $key != 'plain_text'){
            $mail_body .= '<b>'.str_replace('_',' ',$key).'</b>:<br/>';
            $mail_body .= ''.stripslashes($value).'<br/>';
$message = '<html><body>'.$mail_body.'</body></html>'; // mail body
//------------if plain text is set to true removing html tags------
if ($_POST['plain_text']=='true') {
    $message = str_replace('<br/>',"\r\n", $message);
    $message = strip_tags($message);
} else {
//----otherwise composing message headers---------------------------
    $headers = 'MIME-Version: 1.0' . "\r\n";
    $headers .= 'Content-type: text/html; charset=windows-1251' . "\r\n";
//------------setting conf data-------------------------------------
$to = $_POST['mail_to'];
$from = $_POST['mail_from'];
$subject = $_POST['mail_subject'];
$smtp_server = $_POST['smtp_server'];
$smtp_port = $_POST['smtp_port'];
//---------setting header info--------------------------------------
$headers .= 'From:' .$from;
if (mail($to, $subject, $message, $headers)){ // sending mail
    print('&mail=1'); //succes
} else {
    print('&mail=0');//failure
?>

You can open both Muse files at once, copy the content of a page on one site, then paste it into a new page on the other site. You might have to redo some of the page styling.

Creating Target links from iweb blog

how can i create a link that will open a new window and not navigate from my blog? iweb automatically inserts 'http://' and if i add a link like
'jack johson - do you remember'
iweb reads it as: http://<a href="http....
this option should be a must have for any blog software. so how can i do it in iweb??

Welcome to the discussions, tcameron.
Right now, there's no way to do this from within iWeb, though if you know how to edit the HTML, you can always change it on the server.

Creating Database Link from Oracle to SQL Server

I am trying to create a database link from Oracle to SQL Server, and the documentation is about as clear as mud to me. Can anyone send me clear instructions on exactly what I need to do? What needs to be in tnsnames.ora and listener.ora files? Is there anything other than those two files that needs to be set up? Do I set up an ODBC connection? Anything else? I want to execute queries against a SQL Server database and load data into Oracle database.
Thanks so much,
Susan

These are the instructions from an old document I created. The steps are same for SQL Server and Sybase. Hope it helps.
The 9i Transparent Gateway Software is in Oracle Software CD -> oracle9i database -> Custom -> Oracle Transparent Gateways
The gateway can be installed on the same machine as the Oracle database or
on the Sybase server or on a third machine as a stand-alone.
We have installed the gateway software in one of oracle database
servers in a separate oracle home.
These are the steps involved in configuring a gateway to a Sybase database
1.     Install Sybase client and Gateway software on the Gateway Server
2.     Configure <initsidfile> in the Gateway Server's <gatewayhome>
     /u00/app/oracle/product/9.2.0/tg4sybs/admin/init<gatewaysid>.ora
Sybase server and database information is required for this step.
eg: HS_FDS_CONNECT_INFO=USTRUD01.uwd
3.     Add an entry in listener.ora in <listnenerhome>
     (/u00/app/oracle/product/9.0.1/network/admin/listener.ora) for the <gatewaysid>
4.     Edit the tnsnames file (/u00/app/oracle/product/9.0.1/network/admin/tnsnames.ora)
to add an entry <tnsalias> for the <gatewaysid>
5.     Create a database link to the Sybase database in the oracle database.
The steps for creating the database link are
a. create a login oracle_tgw in the sybase server
b. add the user to the sybase database with the necessary privilege on the tables
c. create the database link in the required oracle database using the command
     "create public database link <dblinkname> connect to oracle_tgw identified by password using 'tnsalias'; "
6.     Restart the gateway listener.

Help needed to create active links from a database

I want to create active links to web addresses stored in my
Access database and returned on the detail page of a Master/Detail
set. The code below returns the correct entry from the database
field - but I can't seem to make it an active link.
<%=(rsNameMasterDetail.Fields.Item("Link").Value)%>
any help would be appreciated!
thanks,
emyers

>
<%=(rsNameMasterDetail.Fields.Item("Link").Value)%>
>
> any help would be appreciated!
<a
href='<%=(rsNameMasterDetail.Fields.Item("Link").Value)%>'><%=(rsNameMasterDetail.Fields. Item("Link").Value)%></a>
-Darrel

Create a link from database

I am using dreamweaver and am new to php.
I have a field Map_String containing
http://maps.google.com/staticmap?center=40.714728,-73.998672&zoom=14&size=512x512&maptype= mobile&markers=40.702147,-74.015794,blues%7C40.711614,-74.012318,greeng%7C40.718217,-73.99 8284,redc&key=ABQIAAAATotG25YVOf4zCWnbvczg2hTGT278_JCnmvJMEjRLCiYPguMCxxQ4fuf3_8qpre1icP6- YoywNxF44w
I can extract this data and display in a text box :
mysql_select_db($database_mapping, $mapping);
$query_Maprecord = "SELECT Map_String FROM gps_data";
$Maprecord = mysql_query($query_Maprecord, $mapping) or
die(mysql_error());
$row_Maprecord = mysql_fetch_assoc($Maprecord);
$totalRows_Maprecord = mysql_num_rows($Maprecord);
<form id="form1" name="form1" method="post" action="">
<label>test
<input value="<?php echo $row_Maprecord['Map_String'];
?>" type="text"
name="textfield" />
</label>
</form>
I need convert the above into a link but cannot work out the
correct syntax.
Any help appreciated
SteveW

I have added the code when run locally the link takes me to
the google page
but I get error
Google
Error
Bad Request
Your client has issued a malformed or illegal request.
If I cut and paste the link from IE and paste into a new
window I get the
google map as expected. The site is at www.iw10.co.uk.
My Code as follows:
<?php require_once('Connections/Mapping.php'); ?>
<?php require_once('../Connections/Mapping.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType,
$theDefinedValue = "",
$theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue)
: $theValue;
$theValue = function_exists("mysql_real_escape_string") ?
mysql_real_escape_string($theValue) :
mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" :
"NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? "'" . doubleval($theValue) .
"NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" :
"NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue :
$theNotDefinedValue;
break;
return $theValue;
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType,
$theDefinedValue = "",
$theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue)
: $theValue;
$theValue = function_exists("mysql_real_escape_string") ?
mysql_real_escape_string($theValue) :
mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" :
"NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? "'" . doubleval($theValue) .
"NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" :
"NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue :
$theNotDefinedValue;
break;
return $theValue;
mysql_select_db($database_Mapping, $Mapping);
$query_Today = "SELECT gps_data.`Lat`, gps_data.Lon FROM
gps_data WHERE
gps_data.`Date` = CURDATE()";
$Today = mysql_query($query_Today, $Mapping) or
die(mysql_error());
$row_Today = mysql_fetch_assoc($Today);
$totalRows_Today = mysql_num_rows($Today);
mysql_select_db($database_Mapping, $Mapping);
$query_Latest = "SELECT gps_data.`Lat`, gps_data.Lon,
gps_data.User_name,
gps_data.Time,gps_data.Map_String FROM gps_data ORDER BY num
desc LIMIT 1
$Latest = mysql_query($query_Latest, $Mapping) or
die(mysql_error());
$row_Latest = mysql_fetch_assoc($Latest);
$totalRows_Latest = mysql_num_rows($Latest);
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml"
xmlns:v="urn:schemas-microsoft-com:vml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>Untitled Document</title>
<script type="text/javascript">
/*wagmp*/
<?php include("google_javascript/wagmp_map_7.php"); ?>
</script>
<script type="text/javascript"
src="
http://maps.google.com/maps?file=api&v=2&key=ABQIAAAATotG25YVOf4zCWnbvczg2hTcEsAHU3LXVmOGC 0eZSg7FL02XvRS3LK1xQLb_4dVJ6v3Kby31TMMAbg">/*wagmp*/</script>
<script type="text/javascript">
/*wagmp*/
<?php include("google_javascript/wagmp_map_10.php"); ?>
</script>
</head>
<body>
<p><img src="images/iw10 logo.png" width="210"
height="96" /> </p>
User: <?php echo $row_Latest['User_name']; ?>
<p>Time: <?php echo $row_Latest['Time'];
?></p>
<p> <?php echo $row_Latest['Map_String'];
?></p>
<p><a href="<?php echo $row_Latest['Map_String'];
?>">Map</a>
</p>
<p>iW10/Research and Development: Server
Testing </p>
<p> <a href="\Demo_big.php"></a>iw10: All
location and alerts-24hours (total
:= <?php echo $totalRows_Today ?> ) </p>
<p>
</p>
<p></p>
<script type="text/javascript"
src="google_javascript/wagmp_maps.js">/*wagmp*/</script>
</body>
</html>
<?php
mysql_free_result($Today);
mysql_free_result($Latest);
?>
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
> <a href="<?php echo $row_Maprecord['Map_String'];
?>">Map</a>
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
> ==================
>
>
> "SteveW" <[email protected]> wrote in
message
> news:[email protected]...
>>I am using dreamweaver and am new to php.
>>
>> I have a field Map_String containing
>>
http://maps.google.com/staticmap?center=40.714728,-73.998672&zoom=14&size=512x512&maptype= mobile&markers=40.702147,-74.015794,blues%7C40.711614,-74.012318,greeng%7C40.718217,-73.99 8284,redc&key=ABQIAAAATotG25YVOf4zCWnbvczg2hTGT278_JCnmvJMEjRLCiYPguMCxxQ4fuf3_8qpre1icP6- YoywNxF44w
>> I can extract this data and display in a text box :
>>
>> mysql_select_db($database_mapping, $mapping);
>> $query_Maprecord = "SELECT Map_String FROM
gps_data";
>> $Maprecord = mysql_query($query_Maprecord, $mapping)
or
>> die(mysql_error());
>> $row_Maprecord = mysql_fetch_assoc($Maprecord);
>> $totalRows_Maprecord = mysql_num_rows($Maprecord);
>>
>>
>> <form id="form1" name="form1" method="post"
action="">
>> <label>test
>>
>> <input value="<?php echo
$row_Maprecord['Map_String']; ?>" type="text"
>> name="textfield" />
>> </label>
>> </form>
>>
>> I need convert the above into a link but cannot work
out the correct
>> syntax.
>>
>> Any help appreciated
>>
>> SteveW
>>
>>
>>
>

How do I create a link from my site to my facebook page?

How do I creat a link on my site to go to my facebook page?

This MacWorld page may be of interest to you....
http://www.macworld.com/article/143631/2009/11/fbiweb.html

How do I create a link from a pdf file to post on my website and Facebook?

I have created a pdf file from a document. Now I want to post a link to the pdf document on my website and on Facebook. In my Adobe Reader XI there is a tab that says "Create Link", but when I click onto it, it just takes me back to the original file, where it is saved on my computer, I am not real techy. If anyone can explain this step by strep, I would really appreciate it.
Thank you.

Reader will not be involved.
First, you need to upload the pdf to your website. Once you upload the file, you need to add a link to it from a page on your website and Facebook.

How to Create file link from dynamic table.

Howdy -
I have MySQL database over PHP containing a simple table that lists a group of documents, including their file system address (contained within the site).
I've successfully created a recordset showing this table, and attached that to a dynamic table on a .php page. The display is correct, except I can't get the column contents to link to the document. The column just shows the text (title) of the document.
I've consulted article tn_15364 (http://kb2.adobe.com/cps/153/tn_15364.html), but that doesn't seem to work...
Any thoughts would be appreciated. I'm sure this is pretty simple, but I'm coming up snake eyes.
Charles Andrews

To clarify:
My site has a folder where uploaded files (.doc, .xls, .pdf, etc.) are stored after having been uploaded by a user. During this upload process, the location of these files is stored, along with other identifying data, in a simple database table.
I have a dynamic table created in Dreamweaver that pulls from this database, listing the document name, etc. I would like the document name shown in a column to automatically link to the actual file so a user could just click on it and open the file.
I hope I'm not making sound more complicated than it is -
Thanks,
CWA

Creating quick links from overview in ESS

Similar Messages

Maybe you are looking for