Creating Radio Button on Module pool Screen

Hi Gurus,
I am currently working on a program which involves module pool selection screen. In my selection screen i have placed 2 radio buttons, i have kept these radio buttons in same group. But when i am running the program both the radio buttons appear as checked. Could any one help me on that.......I need only one radio button to be checked at a time ..
Thanks in advance....
Regards,
Shiv.

hI,
IT IS HIGHLY IMPOSSIBLE THAT BOTH OF THE RADIOBUTTONS ARE CHECKED.
and there is no chance that both the radiobuttons are in two different groups since in a single group minimum 2 radiobuttons should be there.
check you coding.or if required redraw the radiobuttons. and select the radiobuttons properly while grouping them together..after grouping you will see dotted lines aroung them.
just try that. reward if helpful.
regards,
pankaj singh

Similar Messages

How to create radio button in module pool

Hi All,
Please tell me step by step procedure for creating radio button in module pool.give code for two radiobutton and at a time only one should be selected.
Thanks
Narendra

Hi naren,
In the layout of screen painter click on radiobutton option in the left icons and create in the layout and give name as Radio1 and again select the radiobutton icon and create another and give the name as radio2 and by dragging the cursor select the 2 radiobuttons and goto menubar->edit->grouping->radiobuttons grouping->define.
Double clcik on the 2 radiobuttons and give FCT code for the coding purpose of the 2 radiobuttons.
Cheers!!
VEnk@

Creating Radio Button in Module Pool

Hi All,
I have created a Two radio button on screen 100.
When I run this I will get both radio button selected.
I am unable to group these.
How can I group both?
I am using 4.7. I am not getting Graphical Layout of the screen.
How to group in classical only.

Hi Praveen,
Steps to group radiobuttons with alphanumeric editor.
<li>Place the cursor on first radiobutton and click on Graphical element button in the application toolbar.
<li>Now place the cursor on 2nd radiobutton and click on Define graph.group button in the application toolbar.
<li>Now radiobuttons are grouped and first one is defaulted.
Thanks
Venkat.O

Func- Code for Radio-button in Module-pool Prg.

Hi Friend's.
I have define 2 Radio button
on Module-pool screen.
I am not been able to triger the Radio button in
Pai .
How can i assign the function code for
radio-button in module-pool.
pls can any one help me

Hi,
For radion buttons, what ever the name you will give that name only will hold that value ( Either selected or not ). But this variable should be declared as global variable in main program.
Still if you want to assign function code, you can assign one like other fields on the screen.

How to define RADIO BUTTONS in MODULE POOL PROG.?

Hi Experts,
I need to keep the RADIO BUTTONS in 1000_screen of my_module_pool prog., like,
I hv 2 fields in this screen, as expected, the first shuld hv DEFAULT selection.
So, I just simply, dragged & dropped 2 radio buttons from left menu of the screen builder & given them the names as
R_SUMMARY
R_DETAIL
Then i executed the transaction, but, these above 2 fields are getting selected, as default??
I know that, if its a REPORT prog. we can define as w/ a GROUP, then the 1st one is hv the default selection.
so,
1 - How to define RADIO BUTTONS in this screen of a module pool prog.
2 - How to use these names in the prog.(PAI - i guess)?
thanq
Edited by: Srinivas on Jul 12, 2008 11:59 PM

Hi Srinivas,
Please check this link
Re: urgent:Regd radio buttons in module pool
http://saplab.blogspot.com/2007/10/sample-abap-program-for-module-pool_18.html
http://****************/Tutorials/ABAP/Checkbox/page1.htm
http://****************/Tutorials/ABAP/Checkbox/page2.htm
Best regards,
raam

How to raise pop up window along with radio buttons in module pool program

how to raise pop up window along with radio buttons in module pool program

FUNCTION zscheme_determination.
*"*"Local Interface:
*" IMPORTING
*"     REFERENCE(I_KUNNR) TYPE KUNNR
*" EXPORTING
*"     REFERENCE(E_VALUE) TYPE NETWR_AK
*" TABLES
*"      G_ITEM_DATA_ITAB STRUCTURE ZITEM_DATA
* TYPES: BEGIN OF ty_sord,
*         include type ZSD_SCHEME_DTL,
*         END   OF ty_sord.
* data : gt_sord type standard table of ZSD_SCHEME_DTL,
*         wa_sord type ZSD_SCHEME_DTL.
* select * from ZSD_SCHEME_DTL into table
* gt_sord
* where matnr = i_matnr.
* T_ITEM_DATA
*********Data Declarations
   DATA:
         salesdocumentin LIKE bapivbeln-vbeln,
         orderheaderin LIKE bapisdhd1,
         orderheaderinx LIKE bapisdhd1x,
         sender LIKE bapi_sender,
         binaryrelationshiptype LIKE bapireltype-reltype,
         intnumberassignment LIKE bapiflag-bapiflag,
         behavewhenerror LIKE bapiflag-bapiflag,
         logicswitch LIKE bapisdls,
         testrun LIKE bapiflag-bapiflag,
         convert LIKE bapiflag-bapiflag,
         return LIKE bapiret2 OCCURS 0,
         orderitemsin LIKE bapisditm OCCURS 0,
         orderitemsinx LIKE bapisditmx OCCURS 0,
         orderpartners LIKE bapiparnr OCCURS 0,
         orderschedulesin LIKE bapischdl OCCURS 0,
         orderschedulesinx LIKE bapischdlx OCCURS 0,
         orderconditionsin LIKE bapicond OCCURS 0,
         orderconditionsinx LIKE bapicondx OCCURS 0,
         ordercfgsref LIKE bapicucfg OCCURS 0,
         ordercfgsinst LIKE bapicuins OCCURS 0,
         ordercfgspartof LIKE bapicuprt OCCURS 0,
         ordercfgsvalue LIKE bapicuval OCCURS 0,
         ordercfgsblob LIKE bapicublb OCCURS 0,
         ordercfgsvk LIKE bapicuvk OCCURS 0,
         ordercfgsrefinst LIKE bapicuref OCCURS 0,
         orderccard LIKE bapiccard OCCURS 0,
         ordertext LIKE bapisdtext OCCURS 0,
         orderkeys LIKE bapisdkey OCCURS 0,
         extensionin LIKE bapiparex OCCURS 0,
         partneraddresses LIKE bapiaddr1 OCCURS 0.
   DATA : wa_orderpartners LIKE bapiparnr,
          wa_orderitemsin LIKE bapisditm,
          wa_orderitemsinx LIKE bapisditmx,
          wa_orderschedulesin LIKE bapischdl,
          wa_orderschedulesinx LIKE bapischdlx,
          wa_orderconditionsin LIKE bapicond,
          wa_orderconditionsinx LIKE bapicondx,
          wa_return LIKE bapiret2,
          lv_value TYPE netwr_ak.
   DATA : lv_dtyp TYPE char45,
          lv_sorg TYPE vkorg,
          lv_sdch TYPE vtweg,
          lv_sdiv TYPE spart.
   TYPES : BEGIN OF ty_sord,
           zsdscheme TYPE comt_scheme_id,
           posnr TYPE posnr_va,
           matnr TYPE matnr,
           disc_type TYPE rebate_disc_type,
           calc_type TYPE catyp,
           qty_from TYPE kwmeng,
           qty_to TYPE kwmeng,
           spart TYPE spart,
           custcondgrp TYPE kdkg1,
           werks TYPE werks_d,
           matmn TYPE matnr,
           END   OF ty_sord.
   DATA : gt_sord   TYPE STANDARD TABLE OF ty_sord,
          gt_sordd TYPE STANDARD TABLE OF ty_sord,
          wa_sord TYPE ty_sord,
          wa_knvv TYPE knvv,
          lv_cal_foc TYPE p DECIMALS 3,
          lv_cal_dis TYPE p DECIMALS 3,
          lv_new_qty TYPE kwmeng,
          lv_posmat TYPE posnr_va,
          lv_posfoc TYPE posnr_va.
   DATA:lv_diff TYPE kwmeng.
******Schemes Selection Logic
* Get Valid Schemes
* Validate Scheme for validity Period, Material, Customer Type and Plant
   TYPES : BEGIN OF ty_rtab,
           sign   TYPE c LENGTH 1,
           option TYPE c LENGTH 2,
           low    LIKE mara-matnr,
           high   LIKE mara-matnr,
         END OF ty_rtab.
* TYPES : ty_matnr TYPE RANGE OF ty_rtab.
   DATA : it_matnr TYPE TABLE OF ty_rtab,
          wa_matnr TYPE ty_rtab,
          wa_it    TYPE zitem_data,
         wa_tab TYPE zitem_data.
*order table declaration
   TYPES:
         BEGIN OF ty_order,
           zsdscheme TYPE comt_scheme_id,
           matnr     TYPE matnr,
           kwmeng    TYPE kwmeng,
         END OF ty_order,
   BEGIN OF ty_scheme,
    zsdscheme TYPE comt_scheme_id,
*                matnr     TYPE matnr,
    kwmeng    TYPE kwmeng,
END OF ty_scheme.
   DATA:
         gt_order      TYPE TABLE OF ty_order,
         gt_scheme     TYPE TABLE OF ty_scheme,
          wa_scheme    TYPE ty_scheme,
          wa_order     TYPE ty_order.
   DATA:i_kwmeng TYPE kwmeng.
* Transfer all the material received from order to internal table
   LOOP AT g_item_data_itab INTO wa_it.
     MOVE : wa_it-matnr TO wa_matnr-low,
            'I'          TO wa_matnr-sign,
            'EQ'         TO wa_matnr-option.
     APPEND wa_matnr TO it_matnr.
     CLEAR wa_it.
   ENDLOOP.
* Get the Valid Schemes based on given criteria
   SELECT
           zsd_scheme_dtl~zsdscheme
           zsd_scheme_dtl~posnr
           zsd_scheme_dtl~matnr
           zsd_scheme_dtl~disc_type
           zsd_scheme_dtl~calc_type
           zsd_scheme_dtl~qty_from
           zsd_scheme_dtl~qty_to
           zsd_scheme~spart
           zsd_scheme_hdr~custcondgrp
           zsd_scheme_hdr~werks
           zsd_scheme_hdr~matnr
   FROM zsd_scheme_hdr
   INNER JOIN zsd_scheme ON zsd_scheme~zsdscheme = zsd_scheme_hdr~zsdscheme
   INNER JOIN zsd_scheme_dtl ON zsd_scheme_dtl~zsdscheme = zsd_scheme_hdr~zsdscheme
   INTO TABLE gt_sord
   WHERE zsd_scheme_dtl~matnr IN it_matnr
*    zsd_scheme_hdr~matnr IN it_matnr
*    AND zsd_scheme_hdr~werks = '1509'
     AND zsd_scheme_hdr~werks = '1529'
     AND zsd_scheme_hdr~custcondgrp = '01'
     AND zsd_scheme~datuv LE sy-datum
     AND zsd_scheme~datub GE sy-datum.
   SORT gt_sord BY zsdscheme ASCENDING.
* LOOP AT gt_sord INTO wa_sord.
*    READ TABLE g_item_data_itab INTO wa_it WITH KEY matnr = wa_sord-matnr.
*    wa_order-zsdscheme = wa_sord-zsdscheme.
*    wa_order-matnr = wa_it-matnr.
*    wa_order-kwmeng = wa_it-kwmeng.
*    COLLECT wa_order INTO gt_order.
*    CLEAR wa_order.
* ENDLOOP.
   LOOP AT g_item_data_itab INTO wa_it.
     READ TABLE gt_sord INTO wa_sord WITH KEY matnr = wa_it-matnr.
     wa_order-zsdscheme = wa_sord-zsdscheme.
     wa_order-matnr = wa_it-matnr.
     wa_order-kwmeng = wa_it-kwmeng.
     COLLECT wa_order INTO gt_order.
     MOVE : wa_sord-zsdscheme TO wa_scheme-zsdscheme,
            wa_it-kwmeng TO wa_scheme-kwmeng.
     COLLECT wa_scheme INTO gt_scheme.
     CLEAR : wa_order, wa_scheme.
   ENDLOOP.
   CLEAR wa_scheme.
   DATA w_line TYPE sy-tabix.
* Updating table based on Schemes
   LOOP AT gt_scheme INTO wa_scheme.
     CLEAR w_line.
     gt_sordd[] = gt_sord[].
*    DELETE gt_sordd WHERE zsdscheme NE wa_scheme-zsdscheme and disc_type NE 'FOC'.
     DELETE gt_sordd WHERE zsdscheme NE wa_scheme-zsdscheme AND disc_type NE 'F'.
     DELETE ADJACENT DUPLICATES FROM gt_sordd COMPARING zsdscheme matnr.
     DESCRIBE TABLE gt_sordd LINES w_line.
     IF w_line GT 1.
* popup message to select one foc type.
     ELSE.
       CLEAR wa_sord.
       READ TABLE gt_sordd INTO wa_sord INDEX 1.
       IF sy-subrc EQ 0.
         i_kwmeng = wa_scheme-kwmeng.
         lv_cal_foc = i_kwmeng DIV wa_sord-qty_from.
         lv_cal_dis = i_kwmeng MOD wa_sord-qty_from.
         MOVE : lv_cal_foc TO wa_it-kwmeng,
                wa_sord-matnr TO wa_it-matnr.
         APPEND wa_it TO g_item_data_itab.
         SORT gt_order BY kwmeng DESCENDING.
         LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme.
           IF lv_cal_dis GT 0.
*        LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme
*                                             AND lv_cal_dis GT 0.
*                  LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme.
*                LOOP AT g_item_data INTO wa_item_data WHERE matnr EQ wa_order-matnr.
                     LOOP AT g_item_data_itab INTO wa_tab WHERE matnr EQ wa_order-matnr.
                       wa_orderconditionsin-itm_number = wa_tab-posnr.
*                  wa_orderconditionsin-itm_number = wa_item_data-posnr.
                       wa_orderconditionsin-cond_st_no = '001'.
*                  IF gt_sordd-calc EQ ‘post AND disc_type EQ ‘percentage’.
                       IF wa_sord-calc_type EQ 'O' AND wa_sord-disc_type EQ 'P'.
                         wa_orderconditionsin-cond_type = 'ZTPB'.   "'ZREG'.
*                  ELSEIF gt_sordd-calc EQ ‘pre’ AND disc_type EQ ‘percentage’
                       ELSEIF wa_sord-calc_type EQ 'E' AND wa_sord-disc_type EQ 'P'.
                         wa_orderconditionsin-cond_type = 'ZTPP'.   "'ZREG'.
                       ENDIF.
                       wa_orderconditionsin-currency = 'INR'.
                       wa_orderconditionsin-conpricdat = sy-datum.
                       APPEND wa_orderconditionsin TO orderconditionsin.
                       CLEAR wa_orderconditionsin.
*Update Discount Conditon
                     ENDLOOP.
*                  ENDLOOP.
*Modify balance of Item
             CLEAR wa_tab.
             READ TABLE g_item_data_itab INTO wa_tab WITH KEY matnr = wa_order-matnr.
             IF sy-subrc EQ 0.
               lv_diff = wa_tab-kwmeng - lv_cal_dis.
               IF lv_diff GT 0.
                 wa_tab-kwmeng = wa_tab-kwmeng - lv_cal_dis.
*            MODIFY g_item_data TRANSPORTING kwmeng index sy-tabix.
                 MODIFY g_item_data_itab INDEX sy-tabix FROM wa_tab TRANSPORTING kwmeng .
               ELSE.
                 wa_tab-kwmeng = lv_cal_dis.
                 lv_cal_dis = lv_diff.
                 MODIFY g_item_data_itab INDEX sy-tabix FROM wa_tab TRANSPORTING kwmeng .
*            MODIFY G_ITEM_DATA_ITAB TRANSPORTING kwmeng index sy-tabix.
               ENDIF.
               gt_sordd[] = gt_sord[].
               DELETE gt_sordd WHERE zsdscheme NE wa_scheme-zsdscheme AND disc_type EQ 'F'.
               DESCRIBE TABLE gt_sordd LINES w_line.
               IF w_line GT 1.
                 SORT gt_sordd BY zsdscheme DESCENDING.
*              SORT gt_sordd BY quantity DESCENDING.
                 CLEAR wa_sord.
*              LOOP AT gt_sordd WHERE quantity_from LT wa_shceme-kwmeng AND quantity_to GT wa_shceme-kwmeng.
                 LOOP AT gt_sordd INTO wa_sord WHERE qty_from LT wa_scheme-kwmeng AND qty_to GT wa_scheme-kwmeng.
*             LOOP AT gt_order INTO wa_order WHERE scheme = wa_scheme-scheme.
                   LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme.
*                LOOP AT g_item_data INTO wa_item_data WHERE matnr EQ wa_order-matnr.
                     LOOP AT g_item_data_itab INTO wa_tab WHERE matnr EQ wa_order-matnr.
                       wa_orderconditionsin-itm_number = wa_tab-posnr.
*                  wa_orderconditionsin-itm_number = wa_item_data-posnr.
                       wa_orderconditionsin-cond_st_no = '001'.
*                  IF gt_sordd-calc EQ ‘post AND disc_type EQ ‘percentage’.
                       IF wa_sord-calc_type EQ 'O' AND wa_sord-disc_type EQ 'P'.
                         wa_orderconditionsin-cond_type = 'ZDPD'.   "'ZREG'.
*                  ELSEIF gt_sordd-calc EQ ‘pre’ AND disc_type EQ ‘percentage’
                       ELSEIF wa_sord-calc_type EQ 'E' AND wa_sord-disc_type EQ 'P'.
                         wa_orderconditionsin-cond_type = 'ZDPD'.   "'ZREG'.
                       ENDIF.
                       wa_orderconditionsin-currency = 'INR'.
                       wa_orderconditionsin-conpricdat = sy-datum.
                       APPEND wa_orderconditionsin TO orderconditionsin.
                       CLEAR wa_orderconditionsin.
*Update Discount Conditon
                     ENDLOOP.
                   ENDLOOP.
                 ENDLOOP.
               ELSE.
               ENDIF.
             ENDIF.
           ENDIF.
         ENDLOOP.
       ENDIF.
     ENDIF.
   ENDLOOP.
* select
*          ZSD_SCHEME_DTL~ZSDSCHEME
*          ZSD_SCHEME_DTL~POSNR
*          ZSD_SCHEME_DTL~matnr
*          ZSD_SCHEME_DTL~DISC_TYPE
*          ZSD_SCHEME_DTL~CALC_TYPE
*          ZSD_SCHEME_DTL~QTY_FROM
*          ZSD_SCHEME_DTL~QTY_TO
*          ZSD_SCHEME~SPART
*          ZSD_SCHEME_HDR~CUSTCONDGRP
*          ZSD_SCHEME_HDR~WERKS
*          ZSD_SCHEME_HDR~MATNR
* from ZSD_SCHEME_DTL
* inner join ZSD_SCHEME on ZSD_SCHEME~ZSDSCHEME = ZSD_SCHEME_DTL~ZSDSCHEME
* inner join ZSD_SCHEME_HDR on ZSD_SCHEME_HDR~ZSDSCHEME = ZSD_SCHEME_DTL~ZSDSCHEME
* into table
* gt_sord
* where ZSD_SCHEME_DTL~matnr = i_matnr and
*        ZSD_SCHEME~DATUV LE sy-datum and
*        ZSD_SCHEME~DATUB GE sy-datum.
* break-point.
* Process Common Logic for Schemes Processcing
   CLEAR wa_sord.
* Convert FOC Quantity and Materials
* LOOP AT gt_sord INTO wa_sord.
**   lv_cal = i_kwmeng / wa_sord-QTY_FROM.
*    lv_cal_foc = i_kwmeng DIV wa_sord-qty_from.
*    lv_cal_dis = i_kwmeng MOD wa_sord-qty_from.
* ENDLOOP.
*lv_new_qty = i_kwmeng - lv_cal_dis.
* Get the Sales Document Type
   SELECT SINGLE low
FROM tvarvc
INTO lv_dtyp WHERE
name = 'SD_DOC_TYPE'.
   SELECT SINGLE * FROM knvv INTO wa_knvv WHERE kunnr = i_kunnr.
   IF sy-subrc = 0.
     lv_sorg = wa_knvv-vkorg.
     lv_sdch = wa_knvv-vtweg.
     lv_sdiv = wa_knvv-spart.
   ENDIF.
* Give the Popup for schemes with multiple FOC
* Schemes Specific Processing
* Schemes Specific Processing
   orderheaderin-doc_type = lv_dtyp.
   orderheaderin-sales_org = lv_sorg.
   orderheaderin-distr_chan = lv_sdch.
   orderheaderin-division = lv_sdiv.
   wa_orderpartners-partn_role = 'AG'.
   wa_orderpartners-partn_numb = i_kunnr.
   APPEND wa_orderpartners TO orderpartners.
*    wa_ORDERPARTNERS-PARTN_ROLE = 'WE'.
*    wa_ORDERPARTNERS-PARTN_NUMB = p_ship.
*    append wa_ORDERPARTNERS to ORDERPARTNERS.
* Item number begin
   CLEAR : lv_posmat.
   lv_posmat = lv_posmat + 10.
   wa_orderitemsin-itm_number = lv_posmat.
   wa_orderitemsin-material = wa_sord-matmn. "i_matnr.
   wa_orderitemsin-target_qty = lv_new_qty.
* wa_ORDERITEMSIN-TARGET_QU = i_VRKME.
   APPEND wa_orderitemsin TO orderitemsin.
   wa_orderitemsinx-itm_number = lv_posmat.
   wa_orderitemsinx-material = 'X'.
   wa_orderitemsinx-target_qty = 'X'.
   wa_orderitemsinx-target_qu = 'X'.
   APPEND wa_orderitemsinx TO orderitemsinx.
   wa_orderschedulesin-itm_number = lv_posmat.
   wa_orderschedulesin-sched_line = lv_posmat.
   wa_orderschedulesin-req_qty = lv_new_qty.
   APPEND wa_orderschedulesin TO orderschedulesin.
   wa_orderschedulesinx-itm_number = lv_posmat.
   wa_orderschedulesinx-sched_line = lv_posmat.
   wa_orderschedulesinx-req_qty = 'X'.
   wa_orderschedulesinx-updateflag = 'X'.
   APPEND wa_orderschedulesinx TO orderschedulesinx.
   wa_orderconditionsin-itm_number = lv_posmat.
   wa_orderconditionsin-cond_st_no = '001'.
   wa_orderconditionsin-cond_type = 'ZDPD'.   "'ZREG'.
   wa_orderconditionsin-currency = 'INR'.
   wa_orderconditionsin-conpricdat = sy-datum.
   APPEND wa_orderconditionsin TO orderconditionsin.
   wa_orderconditionsinx-itm_number = lv_posmat.
   wa_orderconditionsinx-cond_st_no = '001'.
   wa_orderconditionsinx-cond_type = 'ZDPD'. "'ZREG'.
   wa_orderconditionsinx-updateflag = 'X'.
   wa_orderconditionsinx-cond_value ='X'.
   wa_orderconditionsinx-currency = 'X'.
   APPEND wa_orderconditionsinx TO orderconditionsinx.
****18/06Beg
* if not lv_cal_dis is initial.
*    lv_posmat = lv_posmat + 10.
*    wa_ORDERITEMSIN-ITM_NUMBER = lv_posmat.
*    wa_ORDERITEMSIN-MATERIAL = WA_SORD-MATMN. "i_matnr.
*    wa_ORDERITEMSIN-TARGET_QTY = lv_cal_dis.
** wa_ORDERITEMSIN-TARGET_QU = i_VRKME.
*    append wa_ORDERITEMSIN to ORDERITEMSIN.
*    wa_ORDERITEMSINX-ITM_NUMBER = lv_posmat.
*    wa_ORDERITEMSINX-MATERIAL = 'X'.
*    wa_ORDERITEMSINX-TARGET_QTY = 'X'.
*    wa_ORDERITEMSINX-TARGET_QU = 'X'.
*    append wa_ORDERITEMSINX to ORDERITEMSINX.
*    wa_ORDERSCHEDULESIN-ITM_NUMBER = lv_posmat.
*    wa_ORDERSCHEDULESIN-SCHED_LINE = lv_posmat.
*    wa_ORDERSCHEDULESIN-REQ_QTY = lv_cal_dis.
*    append wa_ORDERSCHEDULESIN to ORDERSCHEDULESIN.
*    wa_ORDERSCHEDULESINX-itm_number = lv_posmat.
*    wa_ORDERSCHEDULESINX-sched_line = lv_posmat.
*    wa_ORDERSCHEDULESINX-req_qty = 'X'.
*    wa_ORDERSCHEDULESINX-updateflag = 'X'.
*    append wa_ORDERSCHEDULESINX to ORDERSCHEDULESINX.
* endif.
* lv_posmat = lv_posmat + 10.
* wa_ORDERITEMSIN-ITM_NUMBER = lv_posmat.
* wa_ORDERITEMSIN-MATERIAL = i_matnr. "WA_SORD-MATMN.
* wa_ORDERITEMSIN-TARGET_QTY = LV_CAL_FOC.
* wa_ORDERITEMSIN-ITEM_CATEG = 'ZDGN'.
** wa_ORDERITEMSIN-TARGET_QU = i_VRKME.
* append wa_ORDERITEMSIN to ORDERITEMSIN.
* wa_ORDERITEMSINX-ITM_NUMBER = lv_posmat.
* wa_ORDERITEMSINX-MATERIAL = 'X'.
* wa_ORDERITEMSINX-TARGET_QTY = 'X'.
* wa_ORDERITEMSINX-TARGET_QU = 'X'.
* wa_ORDERITEMSINX-ITEM_CATEG = 'X'.
* append wa_ORDERITEMSINX to ORDERITEMSINX.
* wa_ORDERSCHEDULESIN-ITM_NUMBER = lv_posmat.
* wa_ORDERSCHEDULESIN-SCHED_LINE = lv_posmat.
* wa_ORDERSCHEDULESIN-REQ_QTY = LV_CAL_FOC.
* append wa_ORDERSCHEDULESIN to ORDERSCHEDULESIN.
* wa_ORDERSCHEDULESINX-itm_number = lv_posmat.
* wa_ORDERSCHEDULESINX-sched_line = lv_posmat.
* wa_ORDERSCHEDULESINX-req_qty = 'X'.
* wa_ORDERSCHEDULESINX-updateflag = 'X'.
* append wa_ORDERSCHEDULESINX to ORDERSCHEDULESINX.
****18/06End
* Item number end
* Switch off dialog (BAPIs always run without)
   CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
   CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
     EXPORTING
*     SALESDOCUMENTIN               =
     order_header_in               = orderheaderin
*     ORDER_HEADER_INX              =
*     SENDER                        =
*     BINARY_RELATIONSHIPTYPE       =
*     INT_NUMBER_ASSIGNMENT         =
*     BEHAVE_WHEN_ERROR             =
*     LOGIC_SWITCH                  =
*     TESTRUN                       =
*     CONVERT                       = ' '
*   IMPORTING
*     SALESDOCUMENT                 =
   TABLES
     return                        = return
     order_items_in                = orderitemsin
     order_items_inx               = orderitemsinx
     order_partners                = orderpartners
     order_schedules_in            = orderschedulesin
     order_schedules_inx           = orderschedulesinx
     order_conditions_in           = orderconditionsin
     order_conditions_inx          = orderconditionsinx
*     ORDER_CFGS_REF                =
*     ORDER_CFGS_INST               =
*     ORDER_CFGS_PART_OF            =
*     ORDER_CFGS_VALUE              =
*     ORDER_CFGS_BLOB               =
*     ORDER_CFGS_VK                 =
*     ORDER_CFGS_REFINST            =
*     ORDER_CCARD                   =
*     ORDER_TEXT                    =
*     ORDER_KEYS                    =
*     EXTENSIONIN                   =
*     PARTNERADDRESSES              =
*    commit work.
   CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
*     EXPORTING
*       WAIT          =
*     IMPORTING
*       RETURN        =
   LOOP AT return INTO wa_return.
     WRITE:/ wa_return-message.
   ENDLOOP.
ENDFUNCTION.
*& Include ZSD_SO_CHANGES2_TOP                               Module Pool      ZSD_SO_CHANGES2
PROGRAM ZSD_SO_CHANGES2.
***&SPWIZARD: DATA DECLARATION FOR TABLECONTROL 'ITEM_DATA'
*&SPWIZARD: DEFINITION OF DDIC-TABLE
TABLES:   VBAP,kna1.
*&SPWIZARD: TYPE FOR THE DATA OF TABLECONTROL 'ITEM_DATA'
TYPES: BEGIN OF T_ITEM_DATA,
          POSNR LIKE VBAP-POSNR,
          MATNR LIKE VBAP-MATNR,
          KWMENG LIKE VBAP-KWMENG,
          VRKME LIKE VBAP-VRKME,
        END OF T_ITEM_DATA.
*&SPWIZARD: INTERNAL TABLE FOR TABLECONTROL 'ITEM_DATA'
DATA:     G_ITEM_DATA_ITAB   TYPE T_ITEM_DATA OCCURS 0,
           G_ITEM_DATA_WA     TYPE T_ITEM_DATA. "work area
DATA:     G_ITEM_DATA_COPIED.           "copy flag
*&SPWIZARD: DECLARATION OF TABLECONTROL 'ITEM_DATA' ITSELF
CONTROLS: ITEM_DATA TYPE TABLEVIEW USING SCREEN 4000.
DATA:GV_NUM TYPE I VALUE 1,
       GV_NUM2 TYPE I.
DATA:     G_T_YREC_TAB_LINES LIKE SY-LOOPC.***********top*************
*& Include ZSD_SO_CHANGES2_TOP                               Module Pool      ZSD_SO_CHANGES2
PROGRAM ZSD_SO_CHANGES2.
***&SPWIZARD: DATA DECLARATION FOR TABLECONTROL 'ITEM_DATA'
*&SPWIZARD: DEFINITION OF DDIC-TABLE
TABLES:   VBAP,kna1.
*&SPWIZARD: TYPE FOR THE DATA OF TABLECONTROL 'ITEM_DATA'
TYPES: BEGIN OF T_ITEM_DATA,
          POSNR LIKE VBAP-POSNR,
          MATNR LIKE VBAP-MATNR,
          KWMENG LIKE VBAP-KWMENG,
          VRKME LIKE VBAP-VRKME,
        END OF T_ITEM_DATA.
*&SPWIZARD: INTERNAL TABLE FOR TABLECONTROL 'ITEM_DATA'
DATA:     G_ITEM_DATA_ITAB   TYPE T_ITEM_DATA OCCURS 0,
           G_ITEM_DATA_WA     TYPE T_ITEM_DATA. "work area
DATA:     G_ITEM_DATA_COPIED.           "copy flag
*&SPWIZARD: DECLARATION OF TABLECONTROL 'ITEM_DATA' ITSELF
CONTROLS: ITEM_DATA TYPE TABLEVIEW USING SCREEN 4000.
DATA:GV_NUM TYPE I VALUE 1,
       GV_NUM2 TYPE I.
DATA:     G_T_YREC_TAB_LINES LIKE SY-LOOPC.
************************pbo*******************
*& Include           ZSD_SO_CHANGES2_PBO
*&SPWIZARD: OUTPUT MODULE FOR TC 'ITEM_DATA'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: COPY DDIC-TABLE TO ITAB
MODULE ITEM_DATA_INIT OUTPUT.
   IF G_ITEM_DATA_COPIED IS INITIAL.
*&SPWIZARD: COPY DDIC-TABLE 'VBAP'
*&SPWIZARD: INTO INTERNAL TABLE 'g_ITEM_DATA_itab'
*    SELECT * FROM VBAP
*       INTO CORRESPONDING FIELDS
*       OF TABLE G_ITEM_DATA_ITAB.
*    G_ITEM_DATA_COPIED = 'X'.
     REFRESH CONTROL 'ITEM_DATA' FROM SCREEN '4000'.
   ENDIF.
   ITEM_DATA-LINES = G_T_YREC_TAB_LINES + 15.
ENDMODULE.
*&SPWIZARD: OUTPUT MODULE FOR TC 'ITEM_DATA'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: MOVE ITAB TO DYNPRO
MODULE ITEM_DATA_MOVE OUTPUT.
   MOVE-CORRESPONDING G_ITEM_DATA_WA TO VBAP.
ENDMODULE.
*&      Module STATUS_4000 OUTPUT
*       text
MODULE STATUS_4000 OUTPUT.
   SET PF-STATUS 'APAR'.
* REFRESH G_ITEM_DATA_ITAB.
    GV_NUM = 1.
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_4000 OUTPUT

How to creat select-option on module pool screen???

Hi All,
please tell me how to creat select-option on module pool screen???
Regards
Deepak

Hi Deepak Kumar Sharma,
There are Two ways to achieve it...
1) How to create a select-options in a module pool screen.
Method 1
a) Create a subscreen area in your screen layout where you want to create the select options.
b) In the top include of your module pool program declare a selection screen as a subscreen e.g.
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
select-options s_matnr for mara-matnr.
SELECTION-SCREEN END OF SCREEN.
c) In the PBO and PAI of the main screen where the select options needs to be created do a call subscreen of the above screen (100).
CALL SUBCREEN sub_area INCLUDING <program> <screen>
This call subscreen statement is necessary for transport of values between screen and program.
Note: All validations of the selection screen fields e.g. the s_matnr field created above should be done in selection screen events like AT SELECTION-SCREEN etc and not in PAI. These selection screen validations etc should be done in the top include only.
Method 2
a) Create 2 separate fields in your screen layout - one for the low value and one for the high value. Insert an icon beside the high value which will call the multiple selections popup screen on user command. Use function module COMPLEX_SELECTIONS_DIALOG to achieve this.
struc_tab_and_field-fieldname = con_cust. " 'KUNNR'
struc_tab_and_field-tablename = con_kna1. " 'KNA1'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
EXPORTING
TITLE = ' '
text = g_titl1 " 'Customers'
tab_and_field = struc_tab_and_field
TABLES
RANGE = rng_kunnr
EXCEPTIONS
NO_RANGE_TAB = 1
CANCELLED = 2
INTERNAL_ERROR = 3
INVALID_FIELDNAME = 4
OTHERS = 5.
IF NOT rng_kunnr[] IS INITIAL.
Read the very first entry of the range table and pass it to
dynpro screen field
READ TABLE rng_kunnr INDEX 1.
IF sy-subrc = 0.
g_cust = rng_kunnr-low.
ENDIF.
You can use the return table rng_kunnr to populate your own internal range table with the values entered by the user. Basically here you are just simulating the work of a select-options parameter by module pool screen elements.
Also have a look on below threads
how to make select option in module pool
select option in module pool program
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7

How to create radio button between two slection screen

hello all.
could you please guide me how to create radio button between two SELECTION-SCREEN in screen painter.
Thank you,
srinivas

hi
SEE THIS CODE
REPORT ZNNR_REPORT NO STANDARD PAGE HEADING MESSAGE-ID ZNNR LINE-SIZE 100 LINE-COUNT 65(4).
******DATA DECLARATIONS**********
DATA : BEGIN OF IT_PLANT OCCURS 0,
        MATNR LIKE MARA-MATNR,
        WERKS LIKE MARC-WERKS,
        PSTAT LIKE MARC-PSTAT,
        EKGRP LIKE MARC-EKGRP,
       END OF IT_PLANT.
DATA : BEGIN OF IT_PONO OCCURS 0,
        EBELN LIKE EKKO-EBELN,
        EBELP LIKE EKPO-EBELP,
        MATNR LIKE EKPO-MATNR,
        WERKS LIKE EKPO-WERKS,
        LGORT LIKE EKPO-LGORT,
       END OF IT_PONO.
TABLES EKKO.
********END OF DATA DECLARATIONS*********
********SELECTION SCREEN DESIGN ***********
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : P_WERKS LIKE MARC-WERKS MODIF ID S1.
SELECT-OPTIONS : S_EBELN FOR EKKO-EBELN NO INTERVALS MODIF ID S2.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R3 RADIOBUTTON GROUP G2 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R3.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R4 RADIOBUTTON GROUP G2.
SELECTION-SCREEN COMMENT 5(20) TEXT-004 FOR FIELD R4.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
******END OF SELECTION SCREEN DESIGN****************
<b>rEWARD IF USEFULL</b>

How to handle The Back button on Module Pool screen

Hi Gurus,
I have created a module pool screen. In that screen I have used some input/output fields(text box) which i have marked mandatory by making the input field as "required" under program tab.
now when running the screen if no data is entered into these mandatory input field then BACK button does not work. First I have to enter some data into the input filed only then the BACK button works. How should i code so that the back button works even without entering the data into these mandatory fields.

hi,
use AT EXIT-COMMAND with the module.
eg. module user_command at exit command.
then there will be no problem.

How to create select-options on module pool screen

Hi all
I want get a range of values from the user from the module pool screen.
Is there any element available on module pool screen like select options on the selection screen of reports.
reply me ASAS.
Thanks.

hi krishna
actually I want to display the details of PO numbers from 45000100 to 45000150. user will enter this range on the module pool screen just as we enter on the selection screen of report. My question is do we have a button like select-option on the module pool screen.
Plz . reply me ASAP.
Thanks.

Radio button in module pool

In ordinary report programs, if we want to change screen value according to the selection of radion button, we use user command and at user command options.
But how do i do it in module pool programming.
Like in module pool if i select one radio button some input fields should be non edidtable.

Hi,
DATA: OK_CODE TYPE SY-UCOMM,
      PROCESS_CODE TYPE SY-UCOMM.
<b>In PAI</b>
MODULE USER_COMMAND_0100.
   PROCESS_CODE = OK_CODE.
CLEAR OK_CODE.
CASE PROCESS_CODE.
WHEN 'RADIO'. " RADIO is the function code for the radibuttons.
      IF R1 = 'X'.
        R2 = SPACE.
      ELSEIF R2 = 'X'.
        R1 = SPACE.
      ENDIF.
ENDCASE.
Hope this helps.
Reward if helpful.
Regards,
Sipra

Radio button in module pool programming

Hello,
Am placing 4 radio button when designing in module pool but at
run time all radio button are getting marked i want only first radio button to be marked and remaining to be with visible but not highlighted plz let me know wht to do in PBO event.

Hi,
Goto to screenpainter of that screen .
Drag and select all the Radio Buttons .
Goto Edit>Grouping>Radiobutongroup-->Define.
Now see the Output.
Regards,
Morris Bond.
Reward Points if Helpful.

How to enable the 'FIND' Button in Module Pool Screen. Logic please

Hi All,
   I am writing one Module Pool Program. I have one requirement like I have to put FIND, FIND+ buttons on different screens.
   I am able to do the code for normal FIND. According to my requirement I have to display one Popup when the user click on FIND button. Once he entered some value it should find all the records and all the fields and display the list of hits in another popup. This whole process should as same as in SE11 Transaction functionality.
   Example: SE11 ->Table Entries -> and click the FIND Button. I need the same functionality in my Program.
   Please let me know ASAP. If you provide some code sample it will be Great.
Thanks & Regards
Kiran

Hi
If you have just implemented the code for FIND I believe u need to add some little modifications for FIND+.
U need only to manage the position of the last found value, so u need to go on from that position for FIND+.
The position should have the two coordinates X (the position in the record) and Y (the number of the record):
- FOUND should start for postion = 0, 0
- FOUND+ should start for position = X, Y
Max

Issue in using radio button in module pool

For same field I need 2 different search help. Based on radio button on screen I need company codeu2019s from different table. Issue is, at execution radio button remains blank. Radio button works only when I use them in PAI under CASE SY-UCOMM. WHEN u2018DONEu2019. IF Normal_Run = u2018Xu2019u2026u2026
Can I use radio button with the below code. Please refer the below code.
PROCESS ON VALUE-REQUEST.
FIELD COMP_CODE MODULE POPULATE_COMP_CODE.
MODULE POPULATE_COMP_CODE INPUT.
IF REPEAT_RUN = 'X'.
PERFORM COMP_CODE_POPULATE.
ELSEIF NORMAL_RUN = 'X'.
PERFORM COMP_CODE_POPULATE_N.
ENDIF.
ENDMODULE.
FORM COMP_CODE_POPULATE .
    SELECT COMP_CODE
      FROM ZIFRS_D_PROCESS
      INTO CORRESPONDING FIELDS OF TABLE VALUES_TAB_CC
      WHERE PROC_NAME = 'DEPRECIATION RUN'.
READ TABLE VALUES_TAB INDEX 1.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD    = 'COMP_CODE'
      DYNPPROG    = PROGNAME
      DYNPNR      = DYNNUM
      DYNPROFIELD = 'COMP_CODE'
      VALUE_ORG   = 'S'
    TABLES
      VALUE_TAB   = VALUES_TAB_CC.
ENDFORM.                    " COMP_CODE_POPULATION
FORM COMP_CODE_POPULATE_N .
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
    EXPORTING
      TABNAME     = '/BI0/SCOMP_CODE'
      FIELDNAME   = 'COMP_CODE'
      DYNPPROG    = PROGNAME
      DYNPNR      = DYNNUM
      DYNPROFIELD = 'COMP_CODE'.
ENDFORM.                    " COMP_CODE_POPULATE_N
Moderator Message: Please use "code" tags to format the code snippet.
Edited by: Suhas Saha on Nov 23, 2011 5:13 PM

Hi
You need to make the Grouping for these Radio button on the screen
Search for how to make Radio buttons grouping
radio buttons in screen painter
http://help.sap.com/printdocu/core/print46c/en/data/pdf/BCDWBTUT/BCDWBTUT.pdf
and search for Radio button Group in this document
assign a Function Code for one of the radio buttons(It allows for only one Radio Button)
This triggers automatic PAI so when you take the F4 Help this is readily available
In TOP include make sure you define the variables corresponding to the Radio buttons on the screen and also provide default value X to one of the Radio buttons
Hope this serves your purpose
Cheerz
Ramchander Rao.K

Dropdown list in a module pool screen

Hi,
There are 2 radio buttons in module pool for 2 Plants.
Now another plant has to be added in the screen. The radio button has to be replaced with a drop down list for these 3 plants.
How can we acheive this?
Thanks,
Kumar.

Hi,
If u want a dropdown for the third plant you enter on the screen, You can use the FM 'VRM_SET_VALUES' to get the dropdown.
Just refer to this sample code to get a dropdown.
TYPE-POOLS: vrm.
PARAMETERS p_werks LIKE mseg-werks AS LISTBOX
VISIBLE LENGTH 20 OBLIGATORY.
DATA: t_werks TYPE vrm_values,
w_line LIKE LINE OF t_werks.
INITIALIZATION.
SELECT werks FROM mseg INTO table t_werks."(w_line-key, w_line-text).
*APPEND w_line TO t_carrid.
*ENDSELECT.
AT SELECTION-SCREEN OUTPUT.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = 'P_werks'
values = t_werks.
*END-OF-SELECTION.
WRITE: / 'Selected Carrid value:', p_werks.
Hope this is helpful.
Edited by: Kalyan Chakravarthi on May 29, 2008 11:55 AM

Creating Radio Button on Module pool Screen

Similar Messages

Maybe you are looking for