Creating REBE03 screen in Building
Dear All.
I want to use Reference factors Tab screen REBE03 for Building which is available in Business Entity, Is it possible to configure the same and will there be any effects on the same. or is there any another procedure to address this. The main purpose is to use the regional location, location and disctrict location availble here in the building. Please note that i am working on 4.7
Experts Please suggest any solution.
Regards,
VaraPrasad
Dear Vara Prasad
I don't think so we as a functional consultant can do this.
We can always use Existing User Exist for having additional Fields such Location etc. as you requested. check with your ABAP Consultant for this.
Thanks and Regards
MVK
Similar Messages
-
How to create multiple screen through FXML sccene builder then create thier
Hello guys
I am loking for a way to create multiple screen through FXML sccene builder then create thier controls and navigate though them.
Thank you at advance.
Edited by: EJP on 6/06/2012 04:17:got rid of the SHOUTING. Don't do that here.Hello,
in the SceneBuilder samples that you can download from the SceneBuilder download page, you will find a project named Login composed of 2 FXML. The Application and Controller code of this sample should help you design your application.
Regards.
Jean-François Denise -
Material not getting displayed in create asn screen
Hi All,
We are not able to see the material under create asn screen in SUS tho the same appears wen we open the PO in SUS.Also,please let me know which function module in sus governs the display of material in create asn screen
Thanks,
ManuHi Jeetu,
can you check in your cube if you have for one material, entries with AND entries without the MATL_TYPE? If this is the case then you were loading transactional data before having the corresponding material master data.
You should adapt your scenario:
- first do not use the standard attribute derivation during your URules: performance is very bad.
- implement a start routine filling an internal table with your material and MATL_TYPE for all entries of material in your datapackage.
- implement an update routine on the MATL_TYPE with a READ on this internal table an raise an ABORT = 4 if the MATL_TYPE is initial or the material in not found.
Now to fix your situation you'll have to reload your cube or alternatively just reload your missing MATL_TYPE MATERIAL from your cube itself and selective delete those which are empty.
hope this helps...
Olivier. -
Need Help to create new screen for RF Sapconsole
Hi Guru's
I'm new on RF (but some years in ABAP) since last week.
I need help to create new screens for RF (SAPLLMOB).
Can someone explain me the procedure to create screen (with ABAP code after) or perhaps someone have an exemple (simple or not) ?
I have to develop 2 new screens with really few time.
And, another subsidiary question :
how SAP can transfert information between the flash gun and the screen i have developped.
Is there some code to add to enable this functionality or it is include in SAPLLMOB on standard fields ????
It's a new strange world for me today...
Many thanks to everyone who can explain me
Alainhi,
I am facing this problem as well. Is there any reference to create the new screen?
Hope someone can help! Thanks!
Regards,
Darren -
After installing an application that was created using the Application Builder
After installing an application that I created using the Application Builder I get this error if I try to run " ANY " LabVIEW App's that I have built. "Executable Version 7.1.1 doesn't match Resource File 7.1. Check your configuration."
The way that I tried to fix this is to reload LabVIEW 7.1 and DAQmx 8.0. I am using two NI-6528 switch cards.
After I reload LabVIEW and DAQmx I can run my applications but as soon as I install one on this development machine the error begins again.
The executable that I built works fine on the development machine and any other machine that I try it on but it appears that the Run-Time engine 7.1 becomes corrupt after I run setup.exe for the newly created application.
I have built numerous Installers, setup.exe's in the past without this error. Just this latest one caused this problem to start.
I can NOT upgrade to 7.1.1. I am doing work for many different sections of this factory and I can not force them to upgrade. I've asked. Others supply code for the same machines using LabVIEW 7.1.
I am stuck creating executables and manualing moving the correct files to the target machines.
What can be done?No. The KB article was talking about a machine with 7.1.1 installed. I have LabVIEW 7.1 installed.
The machine that I am having trouble with is my development machine. LabVIEW 7.1, DAQmx 8.0.
If I build the executable all is fine. I can still run old executables including the one I just built.
If I create the installer all is fine. I can still run old executables including the one I just built.
When I install the app on my development machine the corruption occurs. I can " NOT " run old executables including the one I just built. The subject error pops up.
I have not moved any executables to the other machines yet. I don't want to corrupt others. -
Issue in Creating a screen variant for FV50 through SHD0
Hi,
I need to create a Screen variant for FV50 to hide the post button through the Transaction SHD0, It was working fine and the function keys BU and BS i disabled in the variant, but the problem is when i disabled the Function keys from FV50 it is not allowing me to post the transaction in FBV0 also. I found that T code FV50 is using the program :SAPMF05A and FBV0 is using : SAPMF05V.
Is there any way to overcome the issue through the transaction SHD0 ?
Regards
SanHi,
To Create aVariant You can use Tcode : SHD0.
Provide the tocde and clik on Screen variant and create...
You can follow the below link as Reference ..
Link:[http://help.sap.com/saphelp_nw04s/helpdata/en/67/232037ebf1cc09e10000009b38f889/content.htm]
Hope it helps you.
Thanks
Arbind -
Creating Selection Screen version in Logical Database
Hi,
I want to design my own Selection screen while creating a report with Logical Database. My requirement is not to show the Standard Selection screen of LDB.
Can it be achieved by creating Selection Screen Version in SE36 and using that version in Attribute of the Report?
If yes, then how can it be created?You can change the Selection Include to include your selection screen version.
Go to SE36
Select "Selections"
Change
Create a new version like:
SELECTION-SCREEN BEGIN OF VERSION 904 TEXT-904.
SELECTION-SCREEN EXCLUDE PARAMETERS: KD_STIDA.
SELECTION-SCREEN EXCLUDE SELECT-OPTIONS: KD_GJAHR, KD_BUDAT, KD_AUGDT,
KD_ZUONR, KD_UMSKZ.
SELECTION-SCREEN END OF VERSION 904.
Regards,
Naimesh Patel -
How to Override Payment Terms on "Create Response" screen
All,
On the Create Response screen, the payment terms are inherited from the Business Partner purchasing data.
How do you override it?
Regards,
GregHi sam
Payment term not transfered to R3
check this thread
now i dont have a system to check on ecs po
but he has edited the payterm
but it is a piece of data which comes from vendor master.
br
muthu -
How to create a popup with link without creating any screen
Hi experts,
Is the any function module or way to create a popup with a link inside (for e.g. to forums.sdn.sap.com)?
I do not want to create any screen and call that screen.
Thanks,
KhanhCALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
EXPORTING
TITEL = 'Title POPUP_TO_DISPLAY_TEXT'
TEXTLINE1 = 'Message to display'
TEXTLINE2 = ' '
START_COLUMN = 25
START_ROW = 6.
CALL FUNCTION 'POPUP_TO_CONFIRM_WITH_MESSAGE'
EXPORTING
DEFAULTOPTION = 'Y'
DIAGNOSETEXT1 = 'This is Testing'
DIAGNOSETEXT2 = ' '
DIAGNOSETEXT3 = ' '
TEXTLINE1 = 'Do You want to Exit'
TEXTLINE2 = ' '
TITEL = 'POPUP_TO_CONFIRM_WITH_MESSAGE'
START_COLUMN = 25
START_ROW = 6
*----for the display of cancel button do like this.
CANCEL_DISPLAY = ' '
IMPORTING
ANSWER = ANS
IF ANS = 'J' .
*---put code on selecting yes
ELSE.
*---put code on selecting no
ENDIF. -
Inifile created by the application builder
Why is an almost empty ini file (with the same name as the executable)
always created in the installation folder when installing a labview
program created with the application builder?
I want to distrubute my own inifile with the installer but it seams
that it is overwritten. I have one other file copied into the
installation folder by the installer and it is installed just fine. Any
suggestions? Do I have to change my inifile name (don´t want that)?
/ RoineHello!
Here you have some more information that you might find helpful when it comes to *.ini files and executables created in LabVIEW:
Setting LabVIEW Preferences For a Windows Executable
http://digital.ni.com/public.nsf/websearch/65f76f247012df68862562c70073be06?OpenDocument
How Do I Prevent Automatic Creation of an INI File in Windows Start Directory when I Run a LabVIEW Executable from the Same Directory?
http://digital.ni.com/public.nsf/websearch/40E442486D81582E86256D16004D5D07?OpenDocument
Will My Application's .ini File Be Overwritten When I Run My LabVIEW Stand Alone Executable?
http://digital.ni.com/public.nsf/websearch/680ADAAD4A2E97F586256DC80074B471?OpenDocument
Regards,
Jimmie A.
Applications Engineer, National Instruments
Regards,
Jimmie Adolph
Systems Engineer Manager, National Instruments Northern Region
Bring Me The Horizon - Sempiternal -
How to create PDF with Form Builder (T-Code:SPF) and how to use it?
How to create PDF with Form Builder (T-Code:SPF) and how to use it? Is there anyone can show me some doc. or PA material ? << removed >> Thank you very much!!
Edited by: Rob Burbank on Nov 11, 2010 1:04 PMPDF forms also known as Adobe From or Interactive Forms.
Check this link -
Interactive Forms
REG:ADOBE FORM
Adobe forms
Regards,
Amit -
How can i create splash screen using netbean?
how can i create splash screen using netbean?
Welcome to the Sun forums.
gabbyndu wrote:
how can i create splash screen..Java 6 offers a splashscreen functionality. See [New Splash-Screen Functionality in Java SE 6|http://java.sun.com/developer/technicalArticles/J2SE/Desktop/javase6/splashscreen/] *(<- link)* for details.
[Java Web Start|http://java.sun.com/javase/technologies/desktop/javawebstart/index.jsp] has offered splash screens to applications since Java 1.2. See [How can I provide my own splash screen?|http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/faq.html#206] in the JWS FAQ for more details.
.. using netbean?We don't support Netbeans here. Ask that on a [Netbeans forum|http://forums.netbeans.org/]. -
Why I cannot create a screen variant?
Hi Gurus,
In transaction SHD0 I am trying to create a screen variant but it is marking the following error:
Attribute for user MYUSER contains errors. Inform system admin.
Message no. BBP_PU245
In transaction SU53 display message: The last authorization check was successful.
The screen variant I am trying to create is for:
Transaction code: BBPSC02
Program: SAPLBBP_SC_UI_ITS
Screen: 300
Somebody can say to me why marks the error?
ThanksThanks Jay,
MYUSER was not in PPOSA_BBP. I added it and no longer display error. -
Problem in creating selection screen from screen painter
hi ,
i am working with screens i have created a screen and in that wehn i click report button it has to ask for select options for dates.from there i will write a select quesry based on selection dates ...how to call a selection screen from screen.i created an include and in that include i used select options.but it is showing error message .guide me how to do it ?Hi..
Here for your problem,
I have created a button with function code 'CLICK' in screen no 1000.
when I click on the button I am capturing the ok_code and displaying the selection screen.
ok_code = sy-ucomm.
case:ok_code.
when 'CLICK'.
SELECTION-SCREEN BEGIN OF SCREEN 500 TITLE title.
SELECT-OPTIONS: P_DATE for sy-datum.
SELECTION-SCREEN END OF SCREEN 500.
title = 'Input Date'.
CALL SELECTION-SCREEN '0500'.
endcase.
You can also have them as subscreen by providing the required parameters in the selection screen.
Hope this solves your problem.
Warm Regards,
Bhuvaneswari. -
iMessage stopped working on iOS 5.1.1 after I set up a new Apple ID. After logging in, it keeps cycling back to the "create ID" screen. Apple's verified my new ID. I've reset the iPod (3) times--no luck.
I solved my problem by Resetting my iPod and then Restoring my files. Only speed bump was losing two apps in the Restore, as the current versions now require iOS 7.1, minimum. Apple makes Reset and Restore (two processes) painless with these Help articles: "Use iTunes to restore your iOS device to factory settings," and "Back up and restore your iPhone, iPad, or iPod Touch using iCloud or iTunes." The Restore took a while to synch my photos and iTunes libraries.
Maybe you are looking for
-
Hi, Can any of you suggest me how to overcum the below issue Tolerance limits need to be maintained for the tolerance key PP for company code xxxx VSK
-
HP PRO8500 KEEPS ASKING FOR MAGANTA INK, THEN LOOSE IMAGE, I ALREADY REPLACED INK TWICE BUT ISSUE STILL PERSIST. PLEASE HELP
-
Problem in transporting Transformations
Hi, We are transporting transformations to our production system (BW Patch 15) for the first time after the 7.0 upgrade. We are seeing the following error message in the transports. Start of the after-import method RS_TRFN_AFTER_IMPORT for object typ
-
PC not recognizing bluetooth on TX
Everything else is working geat on my new TX. Bluetooth hotsync is perfect. WiFi surfing and email are flawless (Thanks LPE). I can send individual files to my PC via Bluetooth. However, I can no longer send individual files via Bluetooth from my PC
-
Smartforms error - no output of first line of table on second page
After pagebreak in a SF-Table there is no output of the first tableline on the second page. I get the output of the title-line an empty line and then the next line. In OTF-Data I see the values but not in Print-Output or preview. It´s only sometimes.