Creating Regions Using APIs
Hi,
I am trying to create a Content Management System using APEX 4.
I was wondering if it is possible to create regions on the fly using APEX API.
The regions will act as modules having custom attributes to load its related region template.
It's appreciated if someone can direct me on this.
Regards,
Salim
What how when you manually create a request for that resource from the UI by selecting/providing same values as you are doing in task, does that generate approvals correctly? When the request is created via your schedule task, if it does not generate approval, then is the resource provisioned to the user? what's the status of the request?
Steps from MOS: 464999.1
tcRequestOperationsIntf reqObj=(tcRequestOperationsIntf)utilFactory.getUtility("Thor.API.Operations.tcRequestOperationsIntf");
long lRequestKey;
long UserKey=1; //beneficiary
long ObjectKey=201; //testro1
HashMap reqMap = new HashMap();
reqMap.put("Requests.Target Type", "U");
reqMap.put("Requests.Object Request Type", "Add");
reqMap.put("Requests.Type", "U");
lRequestKey = reqObj.createRequest(reqMap);
System.out.println("Created request and got key :" + lRequestKey);
//Adding user to be provisioned for resource object
reqObj.addRequestUser(lRequestKey, UserKey);
System.out.println("Added the request user");
//Adding object to be provisioned
reqObj.addRequestObject(lRequestKey, ObjectKey);
System.out.println("Added the request object");
reqObj.completeRequestCreation(lRequestKey);
System.out.println(Completed and submitted the request");-Bikash
Similar Messages
-
Error in creating Employee using API
Hi , i am not able to send the data to base table using the below mentioned code for employee using API:
--Declaration of Variables
DECLARE
--l_person_type_id integer;
l_per_object_version_number number;
l_asg_object_version_number number;
l_person_id number;
l_assignment_id number;
l_per_effective_start_date date;
l_per_effective_end_date date;
l_full_name varchar2(60);
l_per_comment_id number;
l_assignment_sequence number;
l_assignment_number varchar2(30);
l_name_combination_warning boolean;
l_assign_payroll_warning boolean;
l_emp_number varchar2(100);
v_ogi number;
v_bgi varchar2(100);
CURSOR g_valid_emp_cur
IS
SELECT *
FROM xyl_conv_employee_stg
WHERE error_flag = 'V';
Begin
--select business_group_id,organization_id into v_bgi,v_ogi from hr_operating_units h where h. name=oraganization_name AND TRUNC (NVL (date_to, SYSDATE + 1)) > TRUNC (SYSDATE);
for valid_rec in g_valid_emp_cur
loop
select h.business_group_id,h.organization_id into v_bgi,v_ogi from hr_operating_units h where h.name='Vision Sweden' AND TRUNC (NVL (date_to, SYSDATE + 1)) > TRUNC (SYSDATE);
-- l_emp_number := valid_rec.employee_number;
dbms_output.put_line('Business Group Id' || v_bgi);
begin
hr_employee_api.create_employee
(p_validate => false
,p_hire_date => to_date(valid_rec.hire_date, 'dd/mon/yyyy')
,p_business_group_id => v_bgi
,p_last_name => valid_rec.last_name
,p_sex => valid_rec.sex
,p_date_of_birth => to_date(valid_rec.date_of_birth,'dd/mon/yyyy')
,p_employee_number => l_emp_number
,p_first_name => valid_rec.first_name
,p_nationality => null
-- p_person_type_id => l_person_type_id
,p_person_id => l_person_id
,p_assignment_id => l_assignment_id
,p_per_object_version_number => l_per_object_version_number
,p_asg_object_version_number => l_asg_object_version_number
,p_per_effective_start_date => l_per_effective_start_date
,p_per_effective_end_date => l_per_effective_end_date
,p_full_name => l_full_name
,p_per_comment_id => l_per_comment_id
,p_assignment_sequence => l_assignment_sequence
,p_assignment_number => l_assignment_number
,p_name_combination_warning => l_name_combination_warning
,p_assign_payroll_warning => l_assign_payroll_warning
commit;
EXCEPTION
WHEN OTHERS THEN
ROLLBACK;
dbms_output.put_line(SQLERRM);
end;
end loop;
end;
SHOW ERR;
It says enter a person number. Any help would be appreciated.
Edited by: user8984055 on Feb 9, 2013 4:25 AMHi,
When you are doing the initial data migration at that stage you should set up the employee numbering and other numbering mechanism to manual. The reason of doing so is that when you are doing migration at that point you have the employee numbers with you for existing employees.
Once you data migration is done then you have to go to BG information and update the mechanism to Automatic. Also, if you numbering mechanism is automatic and you are not able to change to manual or vice-verse in the BG definition then use will have to use the concurrent program "Change Employee number mechanism". You will have to make the decision of changing from one type to another in a proper way.
Please find below some related articles on metalink for your reference
How to Change Employee Numbering from Manual to Automatic? (Doc ID 292257.1)
Is it Possible to Update Generate Employee Number Method From Automatic to Manual? (Doc ID 393827.1)
Unable to Switch From Auto to Manual for Employee Number Generation in Shared Hr (Doc ID 452044.1)
How to control automatic employee numbering? (Doc ID 473065.1)
Need To Change The Employee Numbering From Automatic To Manual (Doc ID 291634.1)
Hope this helps.
Thanks,
Sanjay -
Error while creating Project using API - PA_PROJECT_PUB.CREATE_PROJECT
I am working on Projects conversion and currently trying to create a project using the API.
I have recetified all the errors it was giving and struck at 1 error. please find the error message below.
"You have submitted invalid parameters to this process, preventing its successful completion. Please contact your system administrator."
It gives me this error and I was not able to know the cause for this error. Please let me know how to bypass this error and go ahead with projects conversion???
Attached below is my package:
Thanks,
Kesava
=====================================================================================================================
CREATE OR REPLACE PACKAGE xxbwp.xxbwp_pa_proj_conv_pkg AUTHID CURRENT_USER
IS
PROCEDURE xxbwp_pa_proj_conv_proc(errbuf OUT VARCHAR2
,retcode OUT VARCHAR2);
END xxbwp_pa_proj_conv_pkg;
CREATE OR REPLACE PACKAGE BODY xxbwp.xxbwp_pa_proj_conv_pkg
IS
PROCEDURE xxbwp_pa_proj_conv_proc(errbuf OUT VARCHAR2
,retcode OUT VARCHAR2)
IS
v_data VARCHAR2(2000);
v_index_out NUMBER;
v_msg_count NUMBER;
v_msg_data VARCHAR2(2000);
v_return_status VARCHAR2(1);
v_api_version_number NUMBER := 1.0;
v_commit VARCHAR2(1) := apps.fnd_api.g_false;
v_init_msg_list VARCHAR2(1) := apps.fnd_api.g_false;
v_workflow_started VARCHAR2(1) := 'Y';
v_pm_product_code VARCHAR2(30) := NULL;
v_op_validate_flag VARCHAR2(1) := 'Y';
v_project_in apps.pa_project_pub.project_in_rec_type;
v_project_out apps.pa_project_pub.project_out_rec_type;
v_customers_in apps.pa_project_pub.customer_tbl_type;
v_key_members apps.pa_project_pub.project_role_tbl_type;
v_class_categories apps.pa_project_pub.class_category_tbl_type;
v_tasks_in apps.pa_project_pub.task_in_tbl_type;
v_tasks_in_rec apps.pa_project_pub.task_in_rec_type;
v_tasks_out apps.pa_project_pub.task_out_tbl_type;
v_org_roles apps.pa_project_pub.project_role_tbl_type;
v_structure_in apps.pa_project_pub.structure_in_rec_type;
v_ext_attr_tbl_in apps.pa_project_pub.pa_ext_attr_table_type;
v_deliverables_in apps.pa_project_pub.deliverable_in_tbl_type;
v_deliverable_actions_in apps.pa_project_pub.action_in_tbl_type;
-- Variables declaration related to project_in_rec_type
l_pm_project_reference VARCHAR2(25);
l_pa_project_id NUMBER;
l_pa_project_number VARCHAR2(25);
l_segment1 VARCHAR2(25);
l_project_name VARCHAR2(30);
l_description VARCHAR2(250);
l_long_name VARCHAR2(240);
l_department_mapping VARCHAR2(50);
l_department_mapping_c VARCHAR2(50);
l_department_mapping_e VARCHAR2(50);
l_created_from_project_id NUMBER;
l_carrying_out_organization_id NUMBER;
l_proj_start_date DATE;
l_completion_date DATE;
l_temp_project_type VARCHAR2(30);
l_company_id VARCHAR2(10);
l_company_id_c VARCHAR2(10);
l_company_id_e VARCHAR2(10);
l_proj_type VARCHAR2(30);
l_cnt NUMBER := 0;
l_task_cnt NUMBER := 0;
l_responsibility_id NUMBER;
l_application_id NUMBER;
l_user_id NUMBER;
l_global_info_msg_count NUMBER;
l_global_info_msg_data VARCHAR2(2000);
l_global_info_return_status VARCHAR2(1);
CURSOR C1 IS
SELECT *
FROM xxbwp.xxbwp_pa_proj_conv_tbl
WHERE proj_type = 'STORAGE';
begin
FOR C1_REC in C1
LOOP
SELECT APPS.pa_projects_s.nextval
INTO l_pa_project_id
FROM DUAL;
BEGIN
SELECT description
INTO l_proj_type
FROM apps.fnd_lookup_values
WHERE lookup_type = 'BWP_PROJECT_TYPES_LKP'
AND lookup_code = C1_REC.proj_type
AND 1 = 1;
END;
BEGIN
SELECT project_id, project_type, carrying_out_organization_id
INTO l_created_from_project_id, l_temp_project_type, l_carrying_out_organization_id
FROM apps.pa_projects_all
WHERE project_type = l_proj_type
AND template_flag = 'Y';
END;
BEGIN
SELECT rt.responsibility_id, rt.application_id
INTO l_responsibility_id, l_application_id
FROM apps.fnd_responsibility_tl rt
WHERE rt.responsibility_name = 'BWP PA Projects Superuser';
EXCEPTION WHEN OTHERS THEN
RETURN;
END;
BEGIN
SELECT u.user_id
INTO l_user_id
FROM APPS.fnd_user u
WHERE u.user_name = 'CHUNDURK';
EXCEPTION WHEN OTHERS THEN
RETURN;
END;
-- Set the environment
APPS.pa_interface_utils_pub.set_global_info
(p_api_version_number => 1.0
,p_responsibility_id => l_responsibility_id
,p_user_id => l_user_id
,p_resp_appl_id => l_application_id
,p_msg_count => l_global_info_msg_count
,p_msg_data => l_global_info_msg_data
,p_return_status => l_global_info_return_status);
--Assign values to project_in_rec_type
v_project_in.pm_project_reference := C1_REC.PROJ_NUM;
v_project_in.pa_project_id := l_pa_project_id;
v_project_in.pa_project_number := C1_REC.PROJ_NUM;
v_project_in.project_name := C1_REC.PROJ_NAME;
v_project_in.description := NULL;
v_project_in.long_name := C1_REC.PROJ_LONG_NAME;
v_project_in.created_from_project_id := l_created_from_project_id;
v_project_in.carrying_out_organization_id := l_carrying_out_organization_id;
v_project_in.start_date := C1_REC.trans_start_date;
v_project_in.completion_date := C1_REC.trans_end_date;
v_project_in.scheduled_start_date := C1_REC.trans_start_date;
v_project_in.scheduled_finish_date := C1_REC.trans_end_date;
v_project_in.project_status_code := 'APPROVED';
FOR x IN (SELECT person_id, project_role_type, start_date_active, end_date_active
FROM apps.pa_project_players
WHERE project_id = 262)
LOOP
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,'PERSON ID '||x.person_id);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,'PROJECT ROLE TYPE '||x.project_role_type);
l_cnt := l_cnt + 1;
v_key_members(l_cnt).person_id := x.person_id;
v_key_members(l_cnt).project_role_type := x.project_role_type;
v_key_members(l_cnt).start_date := x.start_date_active;
v_key_members(l_cnt).end_date := x.end_date_active;
END LOOP;
-- Retrieving and assigning tasks from template to a project
FOR x IN (SELECT task_id, parent_task_id, task_name, long_task_name, task_number, description,
billable_flag, cint_eligible_flag, chargeable_flag
FROM apps.pa_tasks t
WHERE t.project_id = l_created_from_project_id
START WITH parent_task_id IS NULL CONNECT BY PRIOR task_id = parent_task_id)
LOOP
l_task_cnt := l_task_cnt + 1;
v_tasks_in_rec.pm_task_reference := x.task_id;
v_tasks_in_rec.task_name := x.task_name;
v_tasks_in_rec.long_task_name := x.long_task_name;
v_tasks_in_rec.pa_task_number := x.task_number;
v_tasks_in_rec.task_description := x.description;
v_tasks_in_rec.task_start_date := C1_REC.trans_start_date;
v_tasks_in_rec.task_completion_date := C1_REC.trans_end_date;
v_tasks_in_rec.scheduled_start_date := C1_REC.trans_start_date;
v_tasks_in_rec.scheduled_finish_date := C1_REC.trans_end_date;
v_tasks_in_rec.pm_parent_task_reference := x.parent_task_id;
v_tasks_in_rec.billable_flag := x.billable_flag;
v_tasks_in_rec.cint_eligible_flag := x.cint_eligible_flag;
v_tasks_in_rec.chargeable_flag := x.chargeable_flag;
v_tasks_in_rec.tasks_dff := 'Y';
v_tasks_in_rec.attribute1 := l_pa_project_id;
v_tasks_in(l_task_cnt) := v_tasks_in_rec;
END LOOP;
v_class_categories(0).class_category := 'Reimbursable';
v_class_categories(0).class_code := 'No';
APPS.FND_MSG_PUB.initialize;
apps.pa_project_pub.create_project
(p_api_version_number => v_api_version_number
,p_commit => v_commit
,p_init_msg_list => v_init_msg_list
,p_msg_count => v_msg_count
,p_msg_data => v_msg_data
,p_return_status => v_return_status
,p_workflow_started => v_workflow_started
,p_pm_product_code => v_pm_product_code
,p_op_validate_flag => v_op_validate_flag
,p_project_in => v_project_in
,p_project_out => v_project_out
,p_customers_in => v_customers_in
,p_key_members => v_key_members
,p_class_categories => v_class_categories
,p_tasks_in => v_tasks_in
,p_tasks_out => v_tasks_out
,p_org_roles => v_org_roles
,p_structure_in => v_structure_in
,p_ext_attr_tbl_in => v_ext_attr_tbl_in
,p_deliverables_in => v_deliverables_in
,p_deliverable_actions_in => v_deliverable_actions_in
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_return_status||' '||v_msg_count);
IF v_msg_count > 0 THEN
FOR i in 1 .. v_msg_count
LOOP
apps.pa_interface_utils_pub.get_messages
(p_encoded => 'F'
,p_msg_count => v_msg_count
,p_msg_index => i
,p_msg_data => v_msg_data
,p_data => v_data
,p_msg_index_out => v_index_out);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
END LOOP;
end xxbwp_pa_proj_conv_proc;
end xxbwp_pa_proj_conv_pkg;
show errors;
Edited by: user644005 on Sep 11, 2009 11:02 AMHi Kesava,
I notice that in the package you used the application user_name=CHUNDUK calls the API pa_project_pub.create_project.
I wonder if you used chunduk as database user to execute the package Or you used APPS to execute the package?
The APi document states that it is a requirement to create a db username as the same name with the application username.
I have been running the problem to execute API 's delete project and try to figure what could be my problem.
TIA -
Can't create region/use notation
New to GB, but Googled a LOT today.
I'm trying to add notes in the editor, but nothing is working. Here's what I'm doing.
- Launch GB.
- Click Create New Music Project
- Click Create (makes "My Song" on Desktop)
- Displays green Grand Piano
- Click Grand Piano for good measure
- Cmd-Click in grey box to right of "Mixer" (i.e. the track) to try to make new region
NOTHING happens. No context menu. Nothing.
- Click scissors to open track editor editor
- Click note to get notation editor
- Cmd-Click and context menu with notes appears
- Select whole note
NOTHING happens. Note not added to staff.
I've read this forum, bulletsandbones, and a bunch of others.
I cannot create a region in order to add notes to it to use the notation editor.
What am I missing?
Thanks in advance.Thanks for the idea.
I have already tried that. It does create a green region with notes. However, I cannot add my own notes to it. I managed to delete the silly notes by selecting all and deleting, but then I get a whole rest and cannot add notes in. When there are notes in it, I cannot append notes to the end of the region, either.
I'm using 4.1.2, if that makes a difference...
Chris -
Error while creating new projects using api
Hello,
I am having error while creating projects using standard api, PA_PROJECT_PUB.CREATE_PROJECTS. The error I am having is as follow.
Source template ID is invalid.
===
My code is as follow:
SET SERVEROUTPUT ON SIZE 1000000
SET VERIFY OFF
define no=&amg_number
DECLARE
-- Variables used to initialize the session
l_user_id NUMBER;
l_responsibility_id NUMBER;
cursor get_key_members is
select person_id, project_role_type, rownum
from pa_project_players
where project_id = 1;
-- Counter variables
a NUMBER := 0;
m NUMBER := 0;
-- Variables needed for API standard parameters
l_commit VARCHAR2(1) := 'F';
l_init_msg_list VARCHAR2(1) := 'T';
l_api_version_number NUMBER :=1.0;
l_return_status VARCHAR2(1);
l_msg_count NUMBER;
l_msg_data VARCHAR2(2000);
-- Variables used specifically in error message retrieval
l_encoded VARCHAR2(1) := 'F';
l_data VARCHAR2(2000);
l_msg_index NUMBER;
l_msg_index_out NUMBER;
-- Variables needed for Oracle Project specific parameters
-- Input variables
l_pm_product_code VARCHAR2(30);
l_project_in pa_project_pub.project_in_rec_type;
l_key_members pa_project_pub.project_role_tbl_type;
l_class_categories pa_project_pub.class_category_tbl_type;
l_tasks_in pa_project_pub.task_in_tbl_type;
-- Record variables for loading table variables above
l_key_member_rec pa_project_pub.project_role_rec_type;
l_class_category_rec pa_project_pub.class_category_rec_type;
l_task_rec pa_project_pub.task_in_rec_type;
-- Output variables
l_workflow_started VARCHAR2(100);
l_project_out pa_project_pub.project_out_rec_type;
l_tasks_out pa_project_pub.task_out_tbl_type;
-- Exception to call messag handlers if API returns an error.
API_ERROR EXCEPTION;
BEGIN
-- Initialize the session with my user id and Projects, Vision Serves (USA0
-- responsibility:
select user_id into l_user_id
from fnd_user
where user_name = 'SSHAH';
select responsibility_id into l_responsibility_id
from fnd_responsibility_tl
where responsibility_name = 'Projects Implementation Superuser';
pa_interface_utils_pub.set_global_info(
p_api_version_number => l_api_version_number,
p_responsibility_id => l_responsibility_id,
p_user_id => l_user_id,
p_msg_count => l_msg_count,
p_msg_data => l_msg_data,
p_return_status => l_return_status);
if l_return_status != 'S' then
raise API_ERROR;
end if;
-- Provide values for input variables
-- L_PM_PRODUCT_CODE: These are stored in pa_lookups and can be defined
-- by the user. In this case we select a pre-defined one.
select lookup_code into l_pm_product_code
from pa_lookups
where lookup_type = 'PM_PRODUCT_CODE'
and meaning = 'Conversion';
-- L_PROJECT_IN: We have to provide values for all required elements
-- of this record (see p 5-13, 5-14 for the definition of the record).
-- Customers will normally select this information from some external
-- source
l_project_in.pm_project_reference := 'AGL-AMG Project &no';
l_project_in.project_name := 'AGL-AMG Project &no';
l_project_in.created_from_project_id := 1;
l_project_in.carrying_out_organization_id := 2864; /*Cons. West*/
l_project_in.project_status_code := 'UNAPPROVED';
l_project_in.start_date := '01-JAN-11';
l_project_in.completion_date := '31-DEC-11';
l_project_in.description := 'Trying Hard';
l_project_in.project_relationship_code := 'Primary';
-- L_KEY_MEMBERS: To load the key member table we load individual
-- key member records and assign them to the key member table. In
-- the example below I am selecting all of the key member setup
-- from an existing project with 4 key members ('EE-Proj-01'):
for km in get_key_members loop
-- Get the next record and load into key members record:
l_key_member_rec.person_id := km.person_id;
l_key_member_rec.project_role_type := km.project_role_type;
-- Assign this record to the table (array)
l_key_members(km.rownum) := l_key_member_rec;
end loop;
-- L_CLASS_CATEGORIES: commented out below should fix the error we get
-- because the template does not have an assigment for the mandatory class
-- 'BAS Test'
l_class_category_rec.class_category := 'Product';
l_class_category_rec.class_code := 'Non-classified';
-- Assign the record to the table (array)
l_class_categories(1) := l_class_category_rec;
-- L_TASKS_IN: We will load in a single task and a subtask providing only
-- the basic fields (see pp. 5-16,5-17,5-18 for the definition of
-- the task record)
l_task_rec.pm_task_reference := '1';
l_task_rec.pa_task_number := '1';
l_task_rec.task_name := 'Construction';
l_task_rec.pm_parent_task_reference := '' ;
l_task_rec.task_description := 'Plant function';
-- Assign the top task to the table.
l_taskS_in(1) := l_task_rec;
-- Assign values for the sub task
l_task_rec.pm_task_reference := '1.1';
l_task_rec.pa_task_number := '1.1';
l_task_rec.task_name := 'Brick laying';
l_task_rec.pm_parent_task_reference := '1' ;
l_task_rec.task_description := 'Plant building';
-- Assign the subtask to the task table.
l_tasks_in(2) := l_task_rec;
-- All inputs are assigned, so call the API:
pa_project_pub.create_project
(p_api_version_number => l_api_version_number,
p_commit => l_commit,
p_init_msg_list => l_init_msg_list,
p_msg_count => l_msg_count,
p_msg_data => l_msg_data,
p_return_status => l_return_status,
p_workflow_started => l_workflow_started,
p_pm_product_code => l_pm_product_code,
p_project_in => l_project_in,
p_project_out => l_project_out,
p_key_members => l_key_members,
p_class_categories => l_class_categories,
p_tasks_in => l_tasks_in,
p_tasks_out => l_tasks_out);
-- Check the return status, if it is not success, then raise message handling
-- exception.
IF l_return_status != 'S' THEN
dbms_output.put_line('Msg_count: '||to_char(l_msg_count));
dbms_output.put_line('Error: ret status: '||l_return_status);
RAISE API_ERROR;
END IF;
-- perform manual commit since p_commit was set to False.
COMMIT;
--HANDLE EXCEPTIONS
EXCEPTION
WHEN API_ERROR THEN
FOR i IN 1..l_msg_count LOOP
pa_interface_utils_pub.get_messages(
p_msg_count => l_msg_count,
p_encoded => l_encoded,
p_msg_index => i,
p_msg_data => l_msg_data,
p_data => l_data,
p_msg_index_out => l_msg_index_out);
dbms_output.put_line('ERROR: '||to_char(l_msg_index_out)||': '||l_data);
END LOOP;
rollback;
WHEN OTHERS THEN
dbms_output.put_line('Error: '||sqlerrm);
FOR i IN 1..l_msg_count LOOP
pa_interface_utils_pub.get_messages(
p_msg_count => l_msg_count,
p_encoded => l_encoded,
p_msg_index => i,
p_msg_data => l_msg_data,
p_data => l_data,
p_msg_index_out => l_msg_index_out);
dbms_output.put_line('ERROR: '||to_char(l_msg_index_out)||': '||l_data);
END LOOP;
rollback;
END;
===
Msg_count: 1
Error: ret status: E
ERROR: 1: Project: 'AGL-AMG Project 1123'
Source template ID is invalid.
PL/SQL procedure successfully completed.I was using a custom Application, which had a id other then 275 (which belongs to Oracle projects)
-
Hi
While trying to Create Projects using the API, I'm getting two types of errors -
The first is : 'API failed in one stage 1 Customer Name is a mandatory Quick Entry field. Value must be passed'
The second is : '
'API failed in one stage 1 Project: '<Project_Number>'
The class category is invalid.'
Both the messages are produced by our custom program. .. however I am not able to understand why the underlying errors occur.
The first error ( Customer Name is a mandatory quick entry field), is caused by Projects that are to be created from Project templates where it is configured with Quick Entry Customer Name required. We are passing Customer Site number ( Party Bill to site number and Party Ship to side number). The site numbers being passed are also set as 'Primary'. Yet they are failing.
For the second Error ( The Class Category is invalid), I rechecked multiple times, the Class categories for the Projects I am trying to create, with the Config in R12 and they are fine. Can't understand the reason for these two issues. Has anyone encountered such an issue ? If so how was it resolved?
Regards
VivekHI All
I resolved both the issues. In case there are others facing similar issues, following was the cause and resolution of my errors
1. Error 1: Customer Name is a Mandatory Quick Entry field. Value must be passed.
The cause was that the data loaded into our custom staging table was not in the right fields. This was because the data file values and the CTL were not in sync.
Resolution:
Corrected the data file to be in Sync with the structure defined in the CTL and this loaded it successfully
2. Error 2: The class category is invalid.
The cause of this error was that in the Projects Template (used to create the project from), the Quick Entry setup had a Class Category set as required and I was not passing a value ( a class code value) for that Class Category.
Hope this helps somebody else
Cheers
Turnbill -
when creating invoice using the API AR_INVOICE_AP_PUB.Create_Single_invoice Am Getting the below Error:
Transaction type is invalid with current transaction date
invalid transaction type
either an inventory item description must be provided
Kindly help me hereHi Team,
I tried creating the invoice and I got the above errors, however, when updated the batch source ID I am now getting this following error only, i am just left with the following Error only
Either an inventory item or description must be provided.
Please help me on this. -
Trying to create Organization in OIM 11g R2 using API
Hi All,
I am trying to create Organization in OIM 11g R2 using API's. I able to create a organization with attributes Organization Name and Organization Customer Type but when i am trying to add Parent Organization Name it is throwing me the following error
Caused by: oracle.iam.platform.entitymgr.UnknownAttributeException: Organization : [Parent Organization Name]
any help in this regard will be helpful....
ThanksYes i do have the org with act_key 27
I have done that changes...still it is throwing the same error
Exception in thread "main" oracle.iam.identity.exception.OrganizationCreateException: IAM-3056148:act_createby is a System Attribute and cannot be set through API.:act_createby
at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:237)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
at oracle.iam.identity.orgmgmt.api.OrganizationManager_874ar_OrganizationManagerRemoteImpl_1036_WLStub.createx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
at $Proxy2.createx(Unknown Source)
at oracle.iam.identity.orgmgmt.api.OrganizationManagerDelegate.create(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)
at $Proxy3.create(Unknown Source)
at oracle.iam.ui.custom.Class1.main(Class1.java:108)
Caused by: oracle.iam.identity.exception.OrganizationCreateException: IAM-3056148:act_createby is a System Attribute and cannot be set through API.:act_createby
at oracle.iam.identity.orgmgmt.impl.OrganizationManagerImpl.create(OrganizationManagerImpl.java:318)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy333.create(Unknown Source)
at oracle.iam.identity.orgmgmt.api.OrganizationManagerEJB.createx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.oracle.pitchfork.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:34)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.oracle.pitchfork.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:42)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy331.createx(Unknown Source)
at oracle.iam.identity.orgmgmt.api.OrganizationManager_874ar_OrganizationManagerRemoteImpl.__WL_invoke(Unknown Source)
at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
at oracle.iam.identity.orgmgmt.api.OrganizationManager_874ar_OrganizationManagerRemoteImpl.createx(Unknown Source)
at oracle.iam.identity.orgmgmt.api.OrganizationManager_874ar_OrganizationManagerRemoteImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused by: oracle.iam.platform.kernel.ValidationFailedException: IAM-3056148:act_createby is a System Attribute and cannot be set through API.:act_createby
at oracle.iam.identity.usermgmt.utils.UserManagerUtils.createValidationFailedException(UserManagerUtils.java:337)
at oracle.iam.identity.usermgmt.utils.UserManagerUtils.createValidationFailedException(UserManagerUtils.java:372)
at oracle.iam.identity.utils.Utils.checkAllowedAttributes(Utils.java:2523)
at oracle.iam.identity.orgmgmt.impl.handlers.create.CreateOrganizationValidationHandler.validate(CreateOrganizationValidationHandler.java:102)
at oracle.iam.platform.kernel.impl.OrchProcessData.validate(OrchProcessData.java:258)
at oracle.iam.platform.kernel.impl.OrchProcessData.runValidationEvents(OrchProcessData.java:203)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.validate(OrchestrationEngineImpl.java:699)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.process(OrchestrationEngineImpl.java:547)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.orchestrate(OrchestrationEngineImpl.java:485)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.orchestrate(OrchestrationEngineImpl.java:403)
at sun.reflect.GeneratedMethodAccessor1171.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy251.orchestrate(Unknown Source)
at oracle.iam.identity.orgmgmt.impl.OrganizationManagerImpl.create(OrganizationManagerImpl.java:306)
... 46 more -
How to create Custom WEB ADI using API Only for both Dowload/Upload process
I am able to create custom WEB ADI using API for upload process. I have written the following code to create custom WEB ADI using API for upload process.
DECLARE
v_application_id NUMBER:= 20003;
v_object_code VARCHAR2(255):='WEBADI_API_DEM_17';
v_int_user_name VARCHAR2(255):='WEBADI_API_DEM_17';
v_language VARCHAR2(255):='US';
v_source_lang VARCHAR2(255):='US';
v_user_id NUMBER :=1345;
v_integrator_code VARCHAR2(255);--:='WEBADI_API_DEM_17_INTG';
v_param_list_code VARCHAR2(255);
--v_interface_code VARCHAR2(255);
v_interface_code VARCHAR2(255);--:='WEBADI_API_DEM_17_INTF';
p_layout_code VARCHAR2(255):='WEBADI_API_DEM_17_LAYOUT';
V_MAPPING_CODE VARCHAR2(255);
BEGIN
BNE_INTEGRATOR_UTILS.CREATE_INTEGRATOR(P_APPLICATION_ID =>v_application_id,
P_OBJECT_CODE =>v_object_code,
P_INTEGRATOR_USER_NAME =>v_int_user_name,
P_LANGUAGE =>v_language,
P_SOURCE_LANGUAGE =>v_source_lang,
P_USER_ID =>v_user_id,
P_INTEGRATOR_CODE =>v_integrator_code);
BNE_INTEGRATOR_UTILS.CREATE_INTERFACE_FOR_API (P_APPLICATION_ID =>v_application_id,
P_OBJECT_CODE =>v_object_code,
P_INTEGRATOR_CODE =>v_integrator_code,
P_API_PACKAGE_NAME =>'XXDH_PRICE_LIST_POC_PKG',
P_API_PROCEDURE_NAME =>'CREATE_PRICE_LIST',
P_INTERFACE_USER_NAME =>'WEBADI_API_DEM_17',
P_PARAM_LIST_NAME =>'WEBADI_API_DEM_17',
P_API_TYPE =>'PROCEDURE',
P_API_RETURN_TYPE =>NULL,
P_UPLOAD_TYPE =>2,
P_LANGUAGE =>v_language,
P_SOURCE_LANG =>v_source_lang,
P_USER_ID =>v_user_id,
P_PARAM_LIST_CODE =>v_param_list_code,
P_INTERFACE_CODE =>v_interface_code);
BNE_INTEGRATOR_UTILS.CREATE_DEFAULT_LAYOUT
(P_APPLICATION_ID =>v_application_id,
P_OBJECT_CODE =>v_object_code,
P_INTEGRATOR_CODE =>v_integrator_code,
P_INTERFACE_CODE =>v_interface_code,
P_USER_ID =>v_user_id,
P_FORCE =>FALSE,
P_ALL_COLUMNS =>TRUE,
P_LAYOUT_CODE =>p_layout_code);
BNE_CONTENT_UTILS.CREATE_CONTENT_COLS_FROM_VIEW (P_APPLICATION_ID =>v_application_id,
P_CONTENT_CODE =>'WEBADI_API_DEM_17'||'_CNT',
P_VIEW_NAME =>'XXDH_PRICE_LIST_POC_V',
P_LANGUAGE =>v_language,
P_SOURCE_LANGUAGE =>v_source_lang,
P_USER_ID =>v_user_id);
BNE_CONTENT_UTILS.CREATE_CONTENT_TO_API_MAP (P_APPLICATION_ID =>v_application_id,
P_OBJECT_CODE =>v_object_code,
P_INTEGRATOR_CODE =>v_integrator_code,
P_CONTENT_CODE =>'WEBADI_API_DEM_17'||'_CNT',
P_INTERFACE_CODE =>v_interface_code,
P_LANGUAGE =>v_language,
P_SOURCE_LANGUAGE =>v_source_lang,
P_USER_ID =>v_user_id,
P_MAPPING_CODE =>V_MAPPING_CODE);
END;
I need to know what are API we can use to create download+upload ADI? anyone has already prepared script....please share it it me. My email id - [email protected]
ThanksUse FNDLOAD, it's the only way.
There are 2 seperate scripts, 1 for the Integrator and 1 for Layout.
FNDLOAD apps/<pw> 0 Y DOWNLOAD $BNE_TOP/patch/115/import/bneintegrator.lct <your name>.ldt BNE_INTEGRATORS INTEGRATOR_ASN="XXX" INTEGRATOR_CODE="<your code>"
FNDLOAD apps/<pw> 0 Y DOWNLOAD $BNE_TOP/patch/115/import/bnelay.lct <your name>.ldt BNE_LAYOUTS LAYOUT_ASN="XXX" LAYOUT_CODE="<your code>"
Cheers
Jeroen -
How to create a new User / Contact using APIs
I am not able to figure out how to create a new User / Contact in WLPS using APIs
. Is there a factory class ?
Thanks,
AJHi Bala,
Try using these function modules
SUSR_BAPI_USER_CREATE
BAPI_USER_CREATE
BAPI_USER_CREATE1
BAPI_USER_INTERNET_CREATE ( This internally calls BAPI_USER_CREATE1)
Please read the FM documentation for more information. -
Hi guys, I'm trying to use API "ota_cert_enrollment_api.subscribe_to_certification" to create a backdated subscription but have problems with the parameters.
My script is using the call:
ota_cert_enrollment_api.subscribe_to_certification
(p_validate => true
,p_certification_id => 1745
,p_person_id => 531905
,p_business_group_id => 141
,p_approval_flag => 'N'
,p_completion_date => NULL
,p_is_history_flag => 'N'
,p_cert_enrollment_id => l_arg_num_1
,p_certification_status_code => l_arg_str_1
but the error message I'm getting is:
Error messaage: The mandatory argument business_group_id value cannot be null
Cause: The mandatory argument business_group_id has either not been specified or
which seems crazy, as I'm providing the business group id in the parameter and this is the same group as already existing in table "ota_cert_enrollments".
Please can anyone give me guidance or refer me to alternative information on this?
Thanks
GrahamHi guys, I'm trying to use API "ota_cert_enrollment_api.subscribe_to_certification" to create a backdated subscription but have problems with the parameters.
My script is using the call:
ota_cert_enrollment_api.subscribe_to_certification
(p_validate => true
,p_certification_id => 1745
,p_person_id => 531905
,p_business_group_id => 141
,p_approval_flag => 'N'
,p_completion_date => NULL
,p_is_history_flag => 'N'
,p_cert_enrollment_id => l_arg_num_1
,p_certification_status_code => l_arg_str_1
but the error message I'm getting is:
Error messaage: The mandatory argument business_group_id value cannot be null
Cause: The mandatory argument business_group_id has either not been specified or
which seems crazy, as I'm providing the business group id in the parameter and this is the same group as already existing in table "ota_cert_enrollments".
Please can anyone give me guidance or refer me to alternative information on this?
Thanks
Graham -
Create a Participant and assign roles using API (outside the process)
I want to create a participant in the BPM directory using API, which I believe is available in the fuegopapi-client.jar file. What is missing is a sample or documentation for that API. PAPI Javadocs found on the web don't cover the rest of the API available in the mentioned jar file.
There are examples of how to do this within a process, but not outside the context of the process. Any references to documentation or samples, you may have come across is greatly appreciated. I have not had success in finding anything on this forum and the web. Thanks.Hope it helps
private void openSesionDFI() throws ProtocolNotSupportedException, AuthenticationException {
if (directorySessionRol==null){
DirectoryConfigurationManager.getRuntime().setPropertiesFileName(props.getProperty("fuego.custom.replication.config.directoryFile").trim());
Directory.DEFAULT_ENGINE_PRESET);
DirectoryPassport directoryPassport = DirectoryPassport.createWithIDAndPreset(props.getProperty("fuego.custom.replication.config.directoryId").trim(), props.getProperty("fuego.custom.replication.config.preset").trim());
if (directoryPassport == null)
throw new RuntimeException("Invalid directory passport for FDI");
System.out.println("openSesionDFI: " +directoryPassport.getUrl());
directoryPassport.fillPassport();
directorySessionRol = Directory.startAdminSession(directoryPassport);
System.out.println("openSesionDFI: " +"fin");
} -
Error in creating GUID using com.sap.guid API's
Hi
i am trying to create GUID using com.sap.guid API's. I've included the guidgenerator.jar in the classpath. I ran the following code. i got the "Caused by: java.lang.NoClassDefFoundError: com/sap/guid/GUIDGeneratorFactory " error.
the code is
package com.portal;
import com.sapportals.portal.prt.component.;*
import com.sap.guid.GUIDGeneratorFactory;
import com.sap.guid.IGUID;
import com.sap.guid.IGUIDGenerator;
import com.sap.guid.IGUIDGeneratorFactory;
public class TestCompforGUID extends AbstractPortalComponent
public void doContent(IPortalComponentRequest request, IPortalComponentResponse response)
* IGUIDGenerator generator = GUIDGeneratorFactory.getInstance().createGUIDGenerator();*
* String guid = generator.createGUID().toString();*
* String hexGuid = generator.createGUID().toHexString();*
* response.write(guid);*
* response.write(hexGuid);*
can anyone created the GUID's using com.sap.guid API's and help me here.
Do i need to specify any reference in Portalapp.xml ?
Thanks,
Saravanandifficult to reproduce. But it might be a data conversion problem.
e.g. try
to_char(a.num_tabs)If that's not the error comment out certain lines or xmltags and test which one is the reason for the error.
Edited by: Sven W. on Sep 9, 2011 3:13 PM - typo correction -
Create Roles and Permissions using API
Hello,
I'm new to Java and I'm trying to create Roles and Permissions in LiveCycle using API's. Can someone please check and correct my code below?
//Create a ServiceClientFactory object
ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);
// Create an AuthorizationManagerServiceClient object
AuthorizationManagerServiceClient amClient = new AuthorizationManagerServiceClient(myFactory);
RoleImpl ri = new RoleImpl();
ri.setName("Test ES Role");
ri.setDescription("Test Role via API");
ri.setMutableStatus(true);
amClient.createRole(ri);
Executing the above code throws exception as below;
com.adobe.idp.um.api.UMException| [com.adobe.livecycle.usermanager.client.AuthorizationManagerServiceClient] errorCode:16385 errorCodeHEX:0x4001 message:Exception thrown is NOT a DSCException : UnExpected From DSC chainedException:java.lang.IllegalStateExceptionchainedExceptionMessage:null chainedException trace:java.lang.IllegalStateException
at com.adobe.idp.dsc.clientsdk.ServiceClientFactory$1.handleThrowable(ServiceClientFactory.j ava:72)
at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:220)
at com.adobe.livecycle.usermanager.client.AuthorizationManagerServiceClient.createRole(Autho rizationManagerServiceClient.java:159)
at com.adobe.lc.ManageRolesAndPermissions.main(ManageRolesAndPermissions.java:70)
Caused by: java.lang.NoClassDefFoundError: javax.ejb.EJBException
at com.adobe.idp.dsc.clientsdk.ServiceClientFactory.evaluateMessageDispatcher(ServiceClientF actory.java:595)
at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:215)
... 2 more
Caused by: java.lang.ClassNotFoundException: javax.ejb.EJBException
Thank you,
SandeepMahesh,
Refer to your other thread ..
API to create new items in inventory
API to create new items in inventory
Regards,
Hussein -
Creating Quote using Quoting APIs
Hi,
I am using the following method, trying to create a Quote from OA.
oracle.apps.qot.core.Quote.create(ControlRecord controlRecord) returns void
Since the method return void, I could not fetch the Quote details, of the created quote, like quote_header_id, etc.. also am not sure weather the Quote has been created or not.
Plz help me with this, also what values shoud be assigned to ControlRecord object for creating a valid Quote.
Thanks,
AdarshHi,
Below is the description obtained in the quoting implementation guide.
create(ControlRecord) Creates a quote with the attributes populated in this quote
object. Quote header ID, last update date, and quote number
will be populated in the quote header after the quote is
created. This API should be called within a transaction block.
public void
create(oracle.apps.aso.quote.ControlRecord
controlRec)throws FrameworkException, SQLExce
ption, QuoteException
As per this description it should populate Quote header ID, last update date, and quote number . So i am trying to fetch the quote header id and it is showing null.
Is there anything which i am missing in the code?
Regards,
Mithun
Maybe you are looking for
-
Messages showing up as phone numbers not as names
just updates to the latest Mountain Lion today. In Messages, my list of chats that are sent via iMessage are now showing up listed with their iPhone number or their apple id email, not with their names. In the past, Messages would match these up wi
-
For some unknown reason, events and photos in my Iphoto are appearing blank. The photos have a title / placeholder but no picture. I use time machine and have back ups, my goal is to restore the photos without creating duplicates. Unfortunately iphot
-
How to trace the data dictionary tables used in the standard transaction
Dear all, Help me to trace the data dictionary tables used in the standard transaction "crm_dno_monitor". I need to find the tables where the data are stored. or Tell me generally how to find the tables used in the standard transaction. Regards, Prem
-
Hi everyone, How can I read images from R3? Regards Eduardo Campos
-
When I finish the final steps is says serious error has occurred I tried loads
hi I'm having trouble with my ee account because when I finish the extra information part it comes up with " an error has occurred that is preventing you going further try again later " i have been trying for a couple of days can you help?