Creating remittance Challan

When i am creating Remittance Challan then i am getting following error.
Number key not found
Message no. 8I705
Regards
Cheers

Hello,
Create the number ranges and assign then to number groups.
It will solve your problem.
Regards
Ravi

Similar Messages

Error in Creating Remittance Challan -TDS

Hi,
I have Created PO and Invoice of the same of Rs 52,500/- out which Rs 1,176/- is Withholding Tax (TDS) payable. So when I go to J1INCHLN Tcode to create Remittance Challan fill the relavant details and execute it ask me Choose Selection Creation, those are Document number , Reference, Payment Order. So I select the document number and click ok. After that it shows me error saying, "There are no open Items managed in account 13113940."
Where as in T-Code FAGLL03 its shows me in open Items.
Can some one guide me why is it so happening. Or is there something missing.
Also how TDS cretificates is done and TDS payment is done
Points will be awarded.
Regards,
Arvind

Hi,
Check you GL account in FS00 > Control Data, whether Open item managed check box is checked.. if not tick it and do the transactions once again.
After bank challan you have to do challan updation by using T Code J1INBANK. After that you can run the TDS certificates by using T Code J1INCERT.
Hope it helps
Saravanan.A
Assign Points if it is useful.

J1INCHLN - Create Remittance Challan

At the time of posting J1INCHLN - Create Remittance Challan
Following error i m getting
Number key not found
Message no. 8I705
Plz give me the sollution.
I am new to Withholding tax.

Hello,
You may find the following note informative.
Note 1332531 - Form 17/Challan Legal changes - 2009
Regards,
Ravi

Create remittance challan in withhlod tax

Hello friends...
while create remittance challan using T code J1NCHLN i got error Number group not maintained for CO code xxx section IEQ xxx and business place xxxx.
thanks

Hi,
Kindly maintain the entries in the table J_1IEWTNUMGR_1 and the issue
will be resolved.
br, Guido

Error while creating Remittance challan (J1INCHLN)

Hello Gurus,
We are getting an below mentioned error message while creating remittance challan (J1INCHLN) in EWT:
Runtime error SAPSQL_ARRAY_INSERT_DUPREC has occurred
Please help us to resolve the issue.
Thanks
Sheetal

I have one more issue in F-54. While clearing the down payment system is not picking up the whole amount. It shows the difference. For E. g.
Down Payment Entry
Vendor      Dr. 10000
TDS           Cr.          2000
Bank          Cr.          8000
While Clearing Down Payment it shows
Vendor      Dr. 10000
TDS           Cr.          2000
Bank          Cr.          4000
Can you please help me out in this issue.
Thanks & Regards,
Sheetal

Error in creating Remittance challan

Hi
While Creating Remittance challan through T Code J1NCHLN, I am getting error "Business Place for document could not be determined"
Can some one help me out.
Thanks in Advance
Regards,
Pallavi

Hello Pallavi,
For remittance challan business place is reqd. field. I worked on the same issue in my previos project
Business Place: Business place represents your TDS circle. It is mainly to show the Tax deduction account TAN number of the deductor which is mentioned in the TDS certificate. Both these things are important from your TDS certificate point of view.
spro>FA>****>wht>ewht>basic settings>india-->define business places.
If u can give business place in J1INCHLN then automatically create the challan based on the creteria.
if you have any querry pl feel free to contact me
thanks
venkat

Create Remittance challans

Dear All,
When i am creating Remittance challan system is throwing error "Business place for document could not be determined", i am in 6.0, i have created section code. pls let me know where i missed something...
Regards,
Suresh Patipati.

Hi Suresh
You need to maintain the business place under the following path:
SPRO - Ref IMG - FA - FA Global Settings - Taxes on Sales and Purchases - Basic Settings - South Korea - Business Places - Define Business Place.
Give your comapny code and define the business place.
This should solve your problem.
Regards
Kavitha
Edited by: Kavitha Emani on Jul 29, 2008 11:09 AM

Error while creating remittance challan for TDS

Hey guys,
Im trying to Create Remittance Challans for TDS. I have created a Business Place and Section Code and assigned it to the Company Code. Also in the invoice document display the line items have business place. But when i try to Create Remittance Challans, i get an error as follows:
Business Place for document could not be determined
Am i missing some configuration? Can anyone guide me..its urgent!!
I shall assign full points!
Thanks
Niraj

hi,
check the below once
Create business place J_IN_BUSINESSPLACE
Define section code SIMG_ORFB_V_SECCODE Here you can assign section code to the business place.
Activated extended withholding tax for your company code.
Maintain Number Groups and SAPscript Forms J_1IEWT_CERT
Check once all these even the problem is remain tell me what configuration u did for this.
If section code is there business place is not there then create one substitution specifying that if business area is this then the section code is this.
After done this go to any document where there is no business place and section code go for change mode and just save it then system will give you a message that changes have been made. Previously i did the same for this condition
Hope this is helpful if yes assign points
Regards,
Sankar

ERROR IN CREATING REMITTANCE CHALLANS

I am facing while creting internal challans
"Number key not found"
Mesage no: 81705 .
Pls usggest the solution.
Best Regards,
Sudhanshu Dang

Hello Pallavi,
For remittance challan business place is reqd. field. I worked on the same issue in my previos project
Business Place: Business place represents your TDS circle. It is mainly to show the Tax deduction account TAN number of the deductor which is mentioned in the TDS certificate. Both these things are important from your TDS certificate point of view.
spro>FA>****>wht>ewht>basic settings>india-->define business places.
If u can give business place in J1INCHLN then automatically create the challan based on the creteria.
if you have any querry pl feel free to contact me
thanks
venkat

Error While Creating Remittance Challan

Dear All
I have made down payment to a Vendor of Rs. 10,000 .TDS @11.33 was deducted on the Down Payment. Then he raised an invoice of Rs. 100,000. Again TDS was deducted on the Rs. 90,000 balance amount.
Now when I am Cretaing Remittance Challan for him I am getting the following error.''
No unpaid tax lines exist for the given selection criteria.Message no. 8I702
Diagnosis
The corresponding withholding tax line &1& is not present in WITH_ITEM table.
System Response
For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
Procedure
check entries in table WITH_ITEM for the open tax items chosen for clearing.
Thanks and Regards
Kanwaljit

The following may be the one of the cause please check all.
1. Check section code & Bussuniss place at document level in BSEG. if the section code is not updated at document level u can not update the section code and bussiness place for Direct FI invoices from J1INPP as it is meant only for MM invoices. u has to reverse the invoice and repost it. or else develop a BDC/program/query which can update the section code.
2. Check the repient type at vendor master, and also check wheather the recipent type was changed after posting document it ussullay occurs. the possible solution is again the same reverse the document and repost it.
Check these two things first and let me know it the problem still persists.
Thanks & Regards
Krishna Chaitanya

All value not showing at the time of J1INCHLC - Create Remittance Challan

Hi,
I am facing following problem in TCS
I am trying to process TCS Remittance Challan with T.code J1INCHLC, but all document No. not showing at the time of challan process, I checked entry in TCS GL, Table BSEG & WITH_ITEM all document showing properly. Section code also showing in line item.
I checked some document process with same material & same customer. But only few entries showing at the time of TCS Remittance Challan process. I also compare both entries which is showing & un-showing but no difference found.
Kindly suggest solution to resolve the issue.
Sunil

Hi Sunil
If the entires are there in WITH_ITEM and with Section codes, then it should appear in J1INCHLC. Please check other things like the date ranges you are entering in J1INCHLC. Also try by putting the document number which is missing instead of posting date range and fine out whether is it appearing. If you are able to get it, then you would be in a position to find out why it is not appearing.
Regards
Prasanna

While creating Remittance challanas

Hi
While i am generating remittance challanas(J1INCHLN). i am facing the following error
"Business Place for document could not be determined"
Message no. 8I707
nothing in long text also
please suggest

Hi Anil,
For that query this is the Procedure
1.To carry out the activity, choose one of the following navigation options:
Transaction Code: SM30
Menu-System  Services  Table Maintenance  Extended Table Maintenance
2.On the Maintain Table Views: Initial screen, enter the table/ view name J_1IEWTNUMGR_1 and choose the Maintain push button.
3.On the Change View Number Groups for Internal Challan Numbers u2013 EWT India: Section Code screen, make the following entries
Company Code Section Code Off. W/Tax Key Number Group
XXXX XXXX 194C 10
May be this information is useful to you
Regards
Surya

Edcess & Hcess amount not updated in Remittance challan document (Vendor)

Hi Gurus,
I am working on ECC 6.0. Should any body tell me how can i get the ed-cess & higher cess amount in remittance challan document? i have got the Basis TDS & surcharge remitted amount on remittance challan but not get the edcess & higher cess remitted amount? also this is not reflected the ed cess & h cess amount in vendor TDS certificate?
for this i have done the vendor invoice. during this i got the TDS amount by bifurcate. i also maintain seprate GL for TDS Deducion. then after i create remittance challan. but it couldnot shown me in the line item of ed-cess remitted.
Please help me to work out on this problem.
Warm Regards,
Dhananjay R.

Hai
1. If you have separate tax codes for Surcharges, J_1IEWT_SURC table
should be maintained, by setting the checkbox checked, for the company
code. Those tax codes should be available the J_1IEWTSURC table
(use SM30 to maintain these values)
2. If you have a combined tax code for surcharges, then the tax rates
should be maintained in J_1IEWT_SURC1 table.
Make sure that tax codes available in J_1IEWT_SURC1 table are not
available in J_1IEWTSURC table and vice-versa.
3. If you are using separate tax codes for Education cess, those tax
codes should be maintained in the J_1IEWTECESS table and 'X' should be
maintained for the company code in J_1IEWT_ECFLAG table.
4. If you are using combined tax codes for Education cess, tax rates
should be maintained in J_1IEWT_ECESS1 table.
Make sure that the tax codes available in J_1IEWT_ECESS1 table are not
maintained in J_1IEWTECESS table and vice-versa.
Refer (only refer) the solution part of the note 870991 and 853918
for details relating to table creation.
Make sure that in the table for surcharge you have only the tax types
relevant for surcharge AND DOES NOT CONTAIN TAX TYPES RELEVANT TO
BASIC TAX AND CESS ANDMake sure that in the table for ECESS you have only the tax types
relevant for ECESS AND DOES NOT CONTAIN TAX TYPES RELEVANT TO
BASIC TAX AND SURCHARGE
If you have configured secondary cess seperately,i.e a seperate tax
type and code for secondary cess,kindly make sure that you have
applied the steps and the code corrections given in the note 1097621.
Regards

Remittance Challan EWT

Hi Gurus,
I am trying to create remittance challan in EWT, but after entering all selection criteria and executing, Error message is coming that no unpaid tax lines exist in given selection.
Please tell how to solve it.
Thank You

Hi ,
Pls check if Section Code is maintained in the Line Item.
Bhaven Selarka

Remittance challan in withholding tax

Dear All,
When i am creating Remittance challan system is throwing error " Number group not maintained for company code XXXX section IEQXXXX and business place 194C". can any one tell me what is this error...
Regards,
Suresh Patipati.

Hiii..
Create number Group follow the path..IMG-FA-****-Withholding Tax-Extended Withholding Tax-Posting-India-Remittance Challan-Maintain Number Groups.Give your Company code Section code,w/h key & Number Group Than assign number ranges to number groups & after that maintain number Ranges for number groups.
I think this will solve your problem Please let me know if problem stills exists.
Rgds,
D RANA

Creating remittance Challan

Similar Messages

Maybe you are looking for