Creating restricted access to webpages using dreamweaver

Im using dreamweaver and i want to make some of my pages restricted, ive gone through the adobe walkthroughs but there isn't an option to create server behaviours. Is there a way around this?

Hello Ben,
in addition to Mark's hint: If you do it of yourself you have to deal with these ".htaccess" and ".htpasswd" files. I didn't struggle to write them of myself, I used the provider's (ISP) service. The advantage is, that the two files (.htaccess and .htpasswd) are created simultaneously and systemconform.
You too will find this offer, I am sure, at your provider's website. See screenshot of mine ("Passwortschutz" is something like "password protection).
Hans-G.

Similar Messages

How can i create a 3 column webpage using Dreamweaver MX?

Hello,
I was able to create a website with 1 column pages using Dreamweaver MX. I have about 5 pages. I want to add more content to each page; the only way I can do that is to add more columns per page.
I have tried many times but just not getting done. Is there a tutorial on how to do this? What buttons to press?
Regards
rk

Hi dear fdfdeedfas,
I propose we give that thing a little bit from a philosophical and relaxed view. I've decided at that time for a DW CS5, what was as I know now a small advantage for me. You got somewhere else an advantage, I'm sure. In the end, everything balances out.
To make it pragmatically, I suggest to look around at DW support, possibly via chat, on what terms you can upgrade. You probably have already found the links to it, if not I think these one would be the right for more:
http://www.adobe.com/support/dreamweaver/downloads_updaters.html
http://www.adobe.com/downloads/
or, where you can download a free trial of Dreamweaver CS5:
https://www.adobe.com/cfusion/tdrc/index.cfm?product=dreamweaver
Good luck
Hans-G.

Create a PDF from webpage using entire site option doesn't works

OK, guys, this is the problem...
After YEARS of testing from Acrpbat 4 thru 9 on Create a PDF from webpage using entire site option... it doesn't works properly and doesn't got the entire site. ALWAYS get an error of memory or any other error but FINALLY you NEVER got the entire site. I'm talking for a big website... not like amazon.com, but a big one.
I make a walkarround to try to capture the website in parts but Acrobat is not "intelligent" to make a resume capture of the site, because ALWAYS start from the begining instead from the resume position of the site...
My question is, HOW can get the ENTIRE SITE in a PDF document... without getting errors or stopping the capture process...
Don't have problem of low RAM memory because I'm in a MONSTER MACINTOSH.... 3.2 GHZ with 8 Core and 32 GB of RAM under Mac OS X Leopard 10.5.6 in Acrobat 9 Pro.
If I'm not wrong, the GET ENTIRE SITE option in Web Capture (Create a PDF from webpage using entire site option) doesn't works from Acrobat 4 thru 9 in Pro version... tested, you'll never got the entire site... I'm talking in capture a huge entire site and not a little one...
Can someone help me?
Thanks.

Ok so I go to a web page and select something to print. Once I've clicked print I switch over from printer/micosoft xps docu writer/fax and select Adobe PDF. All goes through with a 'Create Adobe PDF' coming up progressing through to eventually save and store. Once I open the file it end up as the picture above. I have the same version on another computer and that works fine but this particular Sony laptop it doesn't seem to work properly.

Create Secure Webpages using Dreamweaver

I have a secure website (using a secure certificate from a certificate authority)....When I create a test HELLO WORLD page and upload it it displays correctly in Chrome (shows https and the green lock icon next to it)....problem is that when I upload other pages that I copied from on one of my other websites that do not run https.... the pages shows a warning with a line across https saying that is not secure.....is there a specific way to save pages using dreamweaver so that they are served securely? Pleasee image attached of my problem:

When I clicok on it this is what I get (please see beloow)...by the way In my source code, i am referencing to things that ar enot local to the site? a google map google captcha google anlytics
i spoke with the company hosting the website and this is what they said:
'As the warning message suggests, this happens when some of your content is served securely (using https) and some is served insecurely (using http).
In order to avoid this warning you would need to serve all the content of a page securely."
"You would need to manually fix these calls to http content within your site's code, or within the software that generated those links. You can check the documentation or support for the software you are using (Drupal, Joomla, etc) or check with your webmaster about that."

How do you embed a Lightroom 3 Slideshowpro web gallery into webpage using Dreamweaver CS5?

I watched the YouTube video by Rafael "RC" Concepcion for incorporating Lightroom into Dreamweaver CS4 but I'm using Dreamweaver CS5 and his method did not work on my Mac system. Does anyone have a step-by-step way or video?

One way to do it is put each gallery in its own subdirectory of your main page (you can use multiple sub galleries) and then have the main page in the root that links to the index.html files in each subdirectory. If your main page is not in the root you have to add the appropriate structure in the return link in the lightroom created gallery "Web or Mail Link" setting.
In the main page the link to my NATURE page would be   ../nature/index.html
Then in the Lightroom created NATURE page you can use the "Contact Info" or "Identity Plate" (This can be graphical as shown on my page)     "Web or Mail Link" setting to return to the main page using      ../index.html
To see and example see my site   http://www.ajaxmtn.com

Restrict Access to Page Using a password.php Instead of Server Behavior

I previously used "log in" and "restrict access to page" server behaviors for my client portal when I only had one client. I had my username and password stored in mySQL database. I recently have gained more clients that all needed to be redirected to their own customized landing page when logged in. Because of this, I used a password.php to store the usernames and passwords and to redirect to different pages. Now, I am wondering how I can restrict access to these pages (i.e. someone won't be able to access the pages by typing the url) since I will not be connecting to a database anymore.

I'm also confused by your statements.
>Now, I am wondering how I can restrict access to these pages
>(i.e. someone won't be able to access the pages by typing the url)
>since I will not be connecting to a database anymore.
It doesn't matter where you store the credentials - database or php file - the techniques for restricting access will be similar. I really don't understand why you moved away from the database when you got more clients. The more data you need to manage, the more reason to store it in a database.
After logging in, most sites direct users to the same page, yet pull user specific data from the database. If for some reason you can't do this and need to built individual pages for each client, then store the 'landing' page for the client in the php file or database. Restrict access to each page by comparing the logged in name with an allowed login name. Or a more dynamic approach would be to dynamically pass the page name to a database query that validates that it's ok for the logged in user to access.
Also, these questions are more appropriate for the app dev forum.

How to enter excell formulas into a webpage using Dreamweaver CS4

I am new at dreamweaver and recently purchased CS4 web premium. I also bought some training videos from an Abode affilated training center on dreamweaver CS4. I was wondering how to create or hide formulas into a webpage. I am trying to enter my MS excel calculator into a webpage. Can anyone help me?
thanks
Mike

Unfortunately this will not work directly in DW.
You probably have 2 alternatives and that is, A - use JavaScript (if you are new to DW/webdesign probably not an option). B - See if there is an extension or plug-in for doing something similar.
For pre-built extensions for DW try: http://www.adobe.com/cfusion/exchange/index.cfm?event=productHome&exc=3&loc=en_us
An alternative (you would have to copy/paste the code yourself would be one of the following (also check with the Microsoft site as this is (hopefully) something that may have come up before)).
http://developer.yahoo.com/
from Microsoft, you could check out: http://www.microsoft.com/downloads/details.aspx?FamilyID=7287252C-402E-4F72-97A5-E0FD290D4 B76&displaylang=en
HTH
PZ

Restrict access to SSID using ACS NAR

Hi,
I currently have 2 ssid's one is for trusted users, the other is for non trusted but employees. Guest access is completely different.
I have a mixture of lightweight and fat AP's as we are undergoing migration.
I have setup a NAR on the two groups using DNIS *(trusted-ssid).
This seems to allow access for the lightweight AP's howevetr they can still use the untrusted credentials to access the trusted network.
On the fat Ap's it seems to not see the SSID and filters all trusted users out.
Is there a better way of doing this??
Is the syntax for matchign the ssid different on fat AP's?
Cheers
scott

Just a bit more background, I am backing off auth to AD and using group match. Just need a way to tie the groups to one SSID and not allow them to use both.
Thanks
Scott

Restrict access to page in Dreamweaver MX 2004 PHP

OK. I'm trying to authenticate users through a log in page,
but it always fail.
I have a index.php, which ask for username and password. It
checks for username password in a MySQL table.
Then I have update.php, once authenticated users can update
some data on a form, and submit changes.
When I enter wrong username/pass, it goes straight to
error.php, which is good.
When I enter correct username/pass, it goes to
....error.php?accesscheck=%2.....
Thanks so much.

tyler4iq wrote:
> OK. I'm trying to authenticate users through a log in
page, but it always fail.
It's a known bug in MX 2004:
http://friendsofed.infopop.net/2/OpenTopic?a=tpc&s=989094322&f=8033053165&m=324102421
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Restrict access using PHP

Hi,
I created a PHP/MySQL site useing Dreamweaver CS3. I created a set of pages that display, add and edit manes in a database, this is working fine. When I add Restrict Access to the pages every time I go to a new page I am taken back to the login page. Is there a way to fix this problem?
Thanks,
Bob

Hi,
After logging in I am sent to the correct restricted access page, that part works. From that page when I try to go to another restricted access page I am sent back to the login page, I login again and I go to that page. Every time I try to go to another restricted access page after login I get sent back to the login page
Thanks
Bob

Restricting Access in Solution Manager by Business Unit?

Hi Experts
We are currently in the process of upgrading our Solution Manager to 7.0 EHP 1. Business wants to restrict access in Solution Manager by business unit. Is this possible? Is it possible to create derived roles which restrict on buisness unit without having to custominze? If it is possible which object needs to be maintained? I'm already aware of restricting access by project using S_Project but this still allows users to view other projects. The requirement is that users only view projects for their business unit.
Please advise experts.

Hi There,
I dont see any reason why you cannot acheive your objective in SolMan, You should be able customize views per business under SPRO_ADMIN and derive required view with in PFCG role separated by business.
Yes, You can also do derived roles concept in Solman and restrict by Org Units.
Guys - Do you differ from my opinion?
-AJ
Edited by: AJ on May 19, 2010 3:47 PM

Unable to run app in Restricted access or Available to developers modes.

Hi
We want to run the application in either Restricted access or Available to developers modes. so that we can move the changes from our QA to production and test it. We are trying to login as ADMIN (having Workspace administrators access) user but unable to run the application. getting Access to this application is restricted to application developers, please try again later. and Access to this application is restricted, please try again later errors.
Our apex version:3.0.1.00.08
Changing application def attributes for Restricted access
status = Restricted access
Build status = Run and build application
Restrict to comma separated user list (status must equal Restricted Access) : ADMIN
Changing application def attributes for Available to developers
status = Available to developers
Build status = Run and build application
Restrict to comma separated user list (status must equal Restricted Access) : (leaving blank)
using sso authentication (do not know whether this impacts) for our application.
Thanks for the help in advance.
Ram

Ram,
1) not able change notification, application access restricted, Please try later(any way to put customized notification.?)I don't think so.
2) Edit links are not available (any availability status to have these..?, other than available with edit links)No.
You might want to implement this using authorization schemes. You would need a way to determine what privileges the authenticated user has then you could restrict access to the whole application or to certain pages based on the privilege.
Scott

How do I create a webpage in Dreamweaver WITHOUT using layers?

I'm reading a lot about how we should not use layers and
tables when creating a website in Dreamweaver because of something
called "absolute placement" (or something), which is the reason the
text in my website is constantly misaligned or overlapping when
opened up in Firefox. Although, I've never had this problem before
for the past three years I've been using Dreamweaver to create my
sites, which is what's most frustrating I think.
So, I guess I'm wondering how, then, do I create a webpage in
Dreamweaver WITHOUT using layers and tables? The only thing I've
been able to do w/o layers/tables is to literally hit "enter" and
"tab" continuously until the cursor is somewhere close to where I
want it to be on the page. But that seems a little old-school (for
lack of a better term) to really be the way to do it.
Also, if I've used a lot of layers/tables already in my
website, is the general recommendation for be to rebuild my site
completely w/o layers/tables, or is it feasible for me to have
someone who knows HTML just come in and fix the actual HTML code
for me to make it all work?
Ideally, I just want something to help me fix this problem
w/o having to hire someone else to come in, cause I've been working
this site for about a year now and am just now finally getting it
up online only to find that the way it looks online is not the way
it looks in Dreamweaver. I'd really really appreciate any
suggestions/advice.
Thank you so much!

Hello,
The first bit of advice, which you may already be doing, it
to learn HTML
and CSS.
CSS is used to style and position elements.
Instead of adding numerous to add spacing, for
example, you can use
CSS to add margins or padding to elements to move them away
from other
elements.
Also, IMHO there is nothing wrong with using tables,
specially as you learn.
You can also use <divs> and CSS to position them (a
table-less layout).
There are a number of threads in this forum comparing them
and giving many
designer's views.
It's Dreamweaver's "Layout Mode" you should stay away
from.Use "Standard
Mode"
It creates tables with rowspanss and colspans that are very
fragile.
Something as simple as a user having a different text size
setting in their
browser than what you had in yours when you designed can make
the page break
apart.
More info:
http://apptools.com/rants/spans.php
Also, "Layers" are an older DW term for AP Divs (Absolutely
Positioned).
They can cause you a lot of frustration.
More info:
http://apptools.com:80/examples/pagelayout101.php
I would strongly suggest you take a couple of hours to do
these tutorials.
They are a great introduction to using CSS, making a
stylesheet and using
DW's "wizards".
They are very well written, illustrated and easy to follow.
I promise you will walk away with a different outlook on how
you can design
a page.
They are not intended to replace learning HTML or CSS in any
way, I just
think it will benefit you greatly seeing what you can do.
http://projectseven.com/tutorials/css/css_td/index.htm
http://projectseven.com/tutorials/css/qdmacfly/index.htm
I hope that helps.
Take care,
Tim
"darkpwca" <[email protected]> wrote in
message
news:[email protected]...
> I'm reading a lot about how we should not use layers and
tables when
> creating a
> website in Dreamweaver because of something called
"absolute placement"
> (or
> something), which is the reason the text in my website
is constantly
> misaligned
> or overlapping when opened up in Firefox. Although, I've
never had this
> problem
> before for the past three years I've been using
Dreamweaver to create my
> sites,
> which is what's most frustrating I think.
>
> So, I guess I'm wondering how, then, do I create a
webpage in Dreamweaver
> WITHOUT using layers and tables? The only thing I've
been able to do w/o
> layers/tables is to literally hit "enter" and "tab"
continuously until the
> cursor is somewhere close to where I want it to be on
the page. But that
> seems
> a little old-school (for lack of a better term) to
really be the way to do
> it.
>
> Also, if I've used a lot of layers/tables already in my
website, is the
> general recommendation for be to rebuild my site
completely w/o
> layers/tables,
> or is it feasible for me to have someone who knows HTML
just come in and
> fix
> the actual HTML code for me to make it all work?
>
> Ideally, I just want something to help me fix this
problem w/o having to
> hire
> someone else to come in, cause I've been working this
site for about a
> year now
> and am just now finally getting it up online only to
find that the way it
> looks
> online is not the way it looks in Dreamweaver. I'd
really really
> appreciate any
> suggestions/advice.
>
> Thank you so much!
>

Problem with Restrict Access to Page with access level using ASP

I'm using Dreamweaver CS3 with ASP-VBScript and an Access
database. The pages were created from scratch for this project,
using those tools all the way through.
I've created a login page, an admin homepage, and add, edit,
and list records pages for three tables. The login page uses the
Server Behavior "Log in User", all other pages use the Server
Behavior "Restrict Access to Page". All of these are based on an
Access Level.
Login seems to work correctly, and redirects to the admin
homepage. From the admin homepage, I can open any other page as
expected, and they initially display correctly. On the add and edit
pages, however,
submitting the form often results in getting logged out, but
not always.
Once this happens, I can log back in, but other problems will
sometimes occur during that second login session. Sometimes,
logouts will occur on pages that worked fine during the first login
session. Sometimes, another session variable that I've setup
manually will change when it shouldn't...as if there were two
values stored for my session variable, and reloading the page
changes to the other value.
This
post seems closest to my experience, but it doesn't look like
there was really an answer beyond "I had to fight with it for a bit
to get it to work":
I suspected that there is some problem with session settings
on the server. We have an almost identical tool on the same server
that was developed with an older version of DW that works more
reliably; it sometimes has problems with the initial login, but
never has a problem after that.
Has anyone experienced problems like this? Any suggestions
for what to check? I'm really pulling my hair out since it's so
unreliable...the kind of problem that goes away when you try to
show someone and comes back when they leave.

Hello,
I was thinking that all I would need would be the username, although username and paswsword would be more secure. There are about 50 users and no groups or levels. They are all equal ... same level.
The website is private and there is a general content area for all users and then there will be private areas for each user where proprietary documents will be held. I need to be able to ensure that user 'A' can only see the user 'A' pages, user 'B' can only see user 'B', etc.
I don't really understand what the Dreamweaver script is doing, but the overview sounded like it was the right tool to accomplish what I'm trying to do.
Any assistance greatly appreciated.
thanks.

ASA WebVPN. How do you restrict access to users in an AD group using LDAP?

Hi All,
I am trying to configure separate WebVPN connection profiles to give different portal bookmark contents to users based on their AD group membership. This has been very difficult, even though I beleive it should be easy.
The login page of teh ASA by default has a dropdown to allow default users to access the default portal and the SSL VPN client connection.
There are two other portals that I would like to restrict access to based on AD group membership. I have set these up to be selected by URL.
The biggest problem is, I have no way of knowing how to go about this. The AAA LDAP options show a group membership search, which I have configured, but I cannot say "Profile X is restricted to AD group CarpetBaggers", so that if soneone that is NOT a carpetbagger tries to log in, it fails.
I can only do an all or nothing scenario.
It would be nice to use Dynamic Access Policies to do this, and I have created a few, but they do NOT seem to work when the drop down aliases or URLs are in use. So how do I go about using them in this scenario? Turning off the aliases or URLs is not really an option right now.
Scenario 1 would work the best for me. Restrict access to profiles/groups based on AD group membership using LDAP.
Scenario 2 would be an ideal longer term solution.
Any thoughts, ideas or assitance would be greatly appreciated.
Cheers

This is exactly what i was looking for, and Nelson is correct. When you enter the DAP configuration for a profile click on "Advanced" and there is the option to create a logical expression. The guide (ther is a button to access this) is really helpful, with a couple of examples. This is what i used:
assert(function()
   if ( (type(aaa.ldap.distinguishedName) == "string") and
        (string.find(aaa.ldap.distinguishedName, "OU=Users") ~= nil) )
then
       return true
   end
   return false
end)()
from the debug dap you can see what Users relates to;
DAP_TRACE: Username: MyUsername, aaa.ldap.distinguishedName = CN=Mr B,OU=Users,OU=Site ******,DC=CH,DC=Mycompany,DC=com
My admin account fails to get me in to the same profile:
DAP_TRACE: dap_add_to_lua_tree:aaa["ldap"]["distinguishedName"]="CN=Admin Mr B,OU=Admin Users,OU=Site *****,DC=CH,DC=Mycompany,DC=com"
Thanks
Andrew

Creating restricted access to webpages using dreamweaver

Similar Messages

Maybe you are looking for