Creating Restrictions in BEx query designer for (1-a), where a is variable.

Dear All,
>>  Suppose for the variable in the BEx query designer, I've created restriction for 0FISCPER to the variable 0P_PER (as 0P_PER-1) by right clicking 0P_PER3, from that a dialog box appears.  In that I've selected 0P_PER3 and then clicked on offset variable and when I set the offset variable, it works for (0P_PER-1.etc, 0P_PER+1,etc..)
But if I want to have (1-0P_PER), then plz tell me how to define this restriction?
Plz explain me the steps to perform (1-0P_PER) restriction in BEx query designer in BW1.
I'm using SAP BI 7.2 gui.
Expecting your reply soon,
with Regards,
Jerald

My requirement is that I want to have " 1-fiscal year"., But this I could not define using offset variables, since using offset we can define "fiscal year +1" or "fiscal year -1". 
So there would be some other way to define "1-fiscalyear".  So Please help me to define "1-fiscalyear"  by giving me the steps.
Thank you,
with Regards,
Jerald

Similar Messages

  • Char restriction in Bex Query Designer

    Hi Gurus,
    Can anyone explain what is the use of the Characteristic Restriction Area in in the BEx Query designer
    If i set 0CALYEAR =2008 in the Char Restriction and in the column definition i set the one of the column to display data from year 2009. Will it work ?
    Please advice
    Thank you
    BR

    There are two type of characterstic restrcitions in the query. Global and local.
    If you are createing a restrcited key figure or selection and restricting calday then it will be restricted to that particular key figure (and show 2008 data) and in the columns it will show you other years data (i.e. 2009 data).
    But if you are using a global fiter in the filter tab of query designer, then it will be applicable to the whole query.

  • Difference between  aggregation and calculation tab in BEx Query Designer

    HI,
    I am using BEx Query Designer for my report, for the key figures in the coloumn area i slected one numeric key figures, in  the properties tab i found aggregation tab and calculation tab.
    I need to sum up the total values for that particualar coloumn, when i used calculation tab i found to sum all the values for a particular coloumn, then what is the use the aggreagation tab?
    I not able to used that Aggregation tab it is showing as a hidden fields...
    can any one tell me whats the exact difference between these tabs and when we need to use which tab?
    With Regards,
    Thanesh Kumar.

    Hi Thanesh Kumar,
    I moved this thread from forum Data Warehousing to Business Explorer since it is a query related question (as SDN moderator).
    I could explain to you the difference between these two tabs.
    For "calculation" tab, it changes the display of result and does not change the calculation logic.
    It means that, if this key figure is used further in formula, still the original number (without "calculation" tab setting)  is used for further formula calculation.
    For "aggregation" tab, it changes the real calculation logic.
    The system takes the setting as the aggregation rule for records.
    The most common aggregation rule is of course summation. If you set to e.g. Average here, the system does the
    Average instead of summation when aggregating records. And the Average value will be taken for calculation
    in further formulas or other calculations.
    For "aggregation" tab, you could only use it for CKF (calculated key figure) or formula and you could not use it for
    a basic key figure. That should be the reason why you see it greyed-out.
    Regards,
    Patricia

  • Infoprovider documentation in BEx query designer

    Hi Experts,
    While users creating queries in BEx query designer (BI7) they have to see the predefined documentation about that inforprovider. Can we achive this requirement?
    What is the use of "Documents" in BEx query designer? Can we show the documentaion under this area?
    Thanks in advance.
    thanks and regards,
    Raju

    Hi,
    Plese go through these links which provides you detailed view on Documnet Navigator and Creating/Editing Documnets in it
    Business Document Navigator :[http://help.sap.com/saphelp_nw70/helpdata/EN/dd/f5253715dfb808e10000009b38f889/content.htm]
    Creating New Documents:[http://help.sap.com/saphelp_nw70/helpdata/EN/df/77ff72021311d3ae4b0000e82deb58/content.htm]
    I hope this helps you.
    Regards,
    Rajknadula

  • Structure copy in BEx query Designer?

    I created structure in BEx Query Designer in BI PRD which is our BI production system.
    I'd like to copy structure to BI DEV which is our BI development system.
    Is is possible?
    If you have any solution, tell me about that.
    Thanks.

    Hi
    If you want the object which is there in PRD to DEV system means, the only way is to do transportation. but to do reverse transportation, you should have STMS connection from your PRD to DEV system.
    The better way is to create the structure again in DEV system.
    If you want to go with reverse transportation, consult your basis person.
    Regards,
    Venkatesh

  • Settings for SAP Portal start page from BEx Query Designer

    Hi!
    In order to see queries I would like to use SAP Enterprise Portal from BEx Query Designer.
    When I push "execute" button within BEx Query Designer a wrong page will be shown in browser.
    I changed the settings in table RSPOR_T_PORTAL, but still get the wrong Portal page shown in browser.
    Question:
    What is the transaction/table/report to customize the portal start page using by BEx Query Designer?
    Thank you very much!
    regards
    Jürgen

    Hi Anton?
    Many thanks for your reply.
    But I mentioned that I changed the URL within table RSPOR_T_PORTAL and this does not help...
    Do you speak Russian? Me too
    Can you also help me with the following problem?
    Hi!
    I am about to implement SAP Best Practices scenario "B34: Accounts Receivable Analysis".
    Therefore I load the data from SAP ERP IDES system into SAP NetWeaver 2004s system.
    My problems are:
    when I try to load the transaction data for Infosources 0FI_AR_4 and 0FI_AR_6 from SAP ERP system the following happens:
    - the status is getting u201Cyellowu201D (194 from 0 records)
    - at the next day the status is getting u201Credu201D and I received the following error:
    Errors while sending packages from OLTP to BI
    Diagnosis
    No IDocs could be sent to BI using RFC.
    System Response
    There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
    Further analysis:
    Check the TRFC log.
    You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
    Error handling:
    If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
    Comment:
    I did not find any entries on "Environment -> Transact. RFC -> In source system"
    The Source system connection EC6CLNT100 is OK
    Can some one help me to solve this problem?
    Edited by: Jgen Pfeiffer on Feb 5, 2009 12:48 PM

  • Need transaction code for opening Bex query designer?

    Hi ALL,
      Can anyone help me with the transaction code for opening Bex query designer?
      Like RRMX for Bex Analyzer similarly i want for Bex query designer.
    Thanks & Regards
    Sameer Khan

    THERE IS NO TCODE FOR QUERY DESIGNER. BUT THERE IS AN ALTERNATIVE..
    OPEN BEX ANALYSER THROUGH RRMX
    OPEN A QUERY
    CLICK ON TOOLS-> EDIT QUERY
    THIS OPENS QUERY DESIGNER AND YOU CAN USE IT NORMALLY..

  • Can we put condition for color in bex query designer

    hi all,
    can any one guide me how to put a condition for color settings in query designer
    for example:
    i have a key figure like ANSWERED%.in analyser it should display in red if  answered% exceeds 95%.
    please help me in this issue.
    regards
    Vamshi D Krishna.

    Hi,
    Use Exceptions while designing your Query.
    Please go through the link
    http://help.sap.com/saphelp_nw04s/helpdata/en/43/21b4cd14cd06f4e10000000a422035/frameset.htm

  • Usage of formulas in conditions in BEx Query Designer

    Hi guys,
    does anybody of you guys know, if it's possible to use the results of formulas in conditions? I tried it, but the result of the query was "No applicable data found", but there are data for the selection.
    When I'm defining the condition with the key figure (no restricted or calculated key figure), then the query can be executed.
    In my case, I like to define a condition based on a formula result. The value should only be displayed, when the result is greater than 30.
    Any ideas or are there any bugy in the BEx Query Designer?
    Thanks a lot + best regards,
    Clemens

    Hi Clemens,
    I have created a condition in my own system based on formula and it works perfectly fine. Please check following points in your condition change mode,
    1) Condition is marked as Active.
    2) In the block "Evaluate condition below for" you will have to select "All characteristics in drilldown Independently". If you have selected combination of characteristics then you will have to maintain proper sequence otherwise your condition will not work.
    3) In the next block when you set the condition, click on new, in the first block select your Formula from dropdown and set the proper operator in your case you will have to select "Greater than" in the next column set the value of key figure and just trasnfer it.
    Now you are ready to use the condition.
    Regards,
    Durgesh.

  • Constant Selection in BEx Query Designer on BI7

    Hi guys
    According to this blog <a href="/people/prakash.darji/blog/2006/09/19/the-hidden-secret-of-constant-selection Selection</a>, we can create constant selection on both Characteristics and Key figures. I understand how to do it with restricted key figures.
    Can anyone give me a step by step guide on how to create constant selection for a Characteristic in BEx Query Designer on BI7. I can't find options for 'constant selection'
    Or is this the same thing when you include or exclude values?
    Message was edited by:
            jimi ogun

    Thanks Krishna
    I am actually using a Multiprovider for my queries but business requirements mean I need to create joins.
    I am trying to avoid Infosets and I believe another way is to use the Constant Selection feature in Query Designer.
    Going back to my previous posting, I know how this is done with a restricted KF but I don't know how when it comes to characteristics.
    Can anyone help?

  • Drilldown in BeX Query Designer

    Hello,
    I am new in SAP. I am having problem creating Drill down. I have this report where all the data is Transactional data. So I haven't created any Master Data. So I won't be able to use Navigational Attribute for Drill down purpose and I don't want to use Hierarchy. Is there any possibility of getting the Drill down in BeX Query Designer? Any help will be appreciated.
    Warm Regards,
    Debayan

    Hi Debayan,
    first of all, what is your requirement to create a drill down?
    A drill down in BEx query means showing additional information from report output. There are 3 ways to drill down a query in BEx
    1. Master data-Navigational Attributes
    2. Master data- Hierarchies
    3. Free characteristics
    As you dont have any master data in the report (which is very strange) you can use the additional characteristics provided in the 'Free characteristics' to see how the drill down works in BEx.
    Please share your exact requirement.
    Hope this helps.
    -Swati.

  • % Calculactions in Bex Query Designer

    Hi Experts,
    Could you please on how can i perform the below % Calculactions in Bex Query Designer.
        Vendor No line item Not = L category =A  status =RFQ :for items
    Example : I have 8 items for vendorNo 200274 and only 4 as above condition and 5 items as not L(delete)
    requament: % RFQ Without Response:
    Percentage of Quotation response ={(No. of RFQReponses Received/ No. of RFQ items sent)*100},
                                                                   ( 4/5 * 100= 80%)
    Percentage RFQ without response= 100 -  Percentage of Quotation response
                                                                  =  100-80 = 20%
    How can i perform the % Calculations in Bex Query Designer.
    Vendor
    Purchasing document
    Indicator: Line Item
    Purch. doc. category
    Purch. doc. status
    Item
    Number of Records
    category A item L
    200274
    V-LINE EUROPE EXPORT MARKETING
    6000003778
    L
    A
    Not assigned
    10
    1
    20
    1
    30
    1
    6000003779
    Not assigned
    A
    Not assigned
    40
    1
    9000000046
    Not assigned
    A
    RFQ
    10
    1
    1
    20
    1
    1
    30
    1
    1
    40
    1
    1
    Result
    8
    4
    thank you

    Hope you have done some groundwork you have done on this requirement. Have you tried to create New Formula and put the required formula in it to calculate Percentage of Quotation response ?
    Your formulas seems to be straight forward.
    Keep in Filter: item Not = L category =A  status =RFQ
    You may start working on it and get back with if you are struck.

  • Results based on From and To value in Bex query designer.

    Dear all,
    We are using BI7.00. In one of our report which pertains to PM user wants to get the details of number of breakdowns which falls in the value range 0 to 1 hours.
    I created a condition which has 2 variables, one is From value and the other is for the To value (since user wants to enter both the limits). I have written a condition that if the breakdown hour is greater than or equal to variable1 and less than or equal to variable2.
    Using the above condition if the query is run, i am not getting the desired output. The values avaialble in the report are 0.65,0.78,1.30,7.38,0 etc., when i give 0 to 1 i should get the values 0.65,0.78 and 0 but instead report displays "No valid results".
    I changed the condition and selected "Between" variable 1 and variable 2 - yet no change in the query.
    To my knowledge i foresee that system is not able to recognize the decimal and hence provides details only based on the whole numbers.
    How to get my requirement achieved in the Bex query designer.
    Experts suggestion with steps will be very useful to solve my problem.
    Regards,
    M.M
    Edited by: Magesh Magesh on Dec 26, 2008 11:28 AM

    Hi Magesh,
    I think you could try one more way.
    Create a formula inserting your two formula variables for limits .(FV -  are ready for input ) .
    The formula would return the result as 1 or 0 because it would have boolean condition in it.
    You could then place a condition in the query designer to only show all records where the value of the formula key fig is 1.
    You formula A would look like
    ( KF > FV1) AND (KF < FV2) * 1.
    And in the condition put A EQ 1.
    You could scale the key figures as well and multiply the limits mentioned by the users in FV1 and FV2 if decimals are still not recognized by SAP.(scaling)
    Regards,
    Sunmit.

  • Doubt on Rows and Coloums in BEx Query Designer.

    Hello, Experts.
    I have a Doubt in BEx Query Designer.
    In the Rows I have a Fiscal year Period,  if the user enters the Fiscal year period for e.g. : 001/2006  .  
    in the columns i have  forecast for the Fiscal year period which user entered ( 001/2006 ),   and we have another column pervious ( Prior )fiscal year period ( 001/2005 ). 
    My Questions is ,  as we are Restricting with 001/2006 will the query retrieve the values of 2005 or not?
    Thanks in Advance .
    Sharp

    yes i am  Doing Offest.
    I moved this Fiscal year Period to Free char,   and i Restricted with Pervious Fical Year period and Fical year period .  it worked.  but
    when i kept this in Rows and deleted Previous Fiscal Year period .  it is displaying blanks.   in prior years forecast.
    is it because i am Ristricting it to only fical year period  which user entered
             Colums-->  Forcast ( User Entered year )          Prior year
    Rows
    Fiscal year period
      Fiscal year period( user enterd )
    Thanks

  • Condition (Defintion) in BEX Query Designer

    Hi Experts,
      I am trying to define a condition in BEX Query Designer.
    I defined my condition and bit confused with Characterstic Assignment
    What Happens if is select 9What is the difference)
    1) All Characterstic in the Drilldown Independtly
    2)Most Detailed  Characterstic Along the Rows
    3)Most Detailed Characterstic Along Columns and
    4)Individual Chars and Chars.Combinations
    Thanks

    Hi,
    <b>● All Characteristics in the Drilldown Independently</b>
    This setting allows you to apply a condition in a general way. Depending on which characteristics you use in the drilldown, you obtain different results.
    Note that the characteristics that are already used in an active condition for characteristic combinations are not included.
    This option is optimized for ranked list conditions, but can also be used for threshold value conditions with relative values.
    <b>●Most Detailed Characteristic Along the Rows or Columns</b>
    This option is optimized for threshold value conditions. The condition is applied to the most detailed characteristic of the rows or columns.
    Note that this function is not supported when executing the query in the BEx Analyzer. For more information, see Restrictions in the BEx Analyzer.
    <b>● Single Characteristics and Characteristic Combinations</b>
    This setting allows you to evaluate the condition for characteristics or characteristic combinations defined for specific drilldowns only. You can select any characteristic (of the characteristics used in the query in rows, columns, or in the free characteristics) or a characteristic combination.
    ○       If you only want to evaluate the condition when a certain characteristic is present in the drilldown, select this characteristic.
    ○       If you want to evaluate the condition for characteristic combinations, select multiple characteristics.
    Source:
    help.sap.com
    For more information and examples please check the following link:
    http://help.sap.com/saphelp_nw70/helpdata/EN/73/702e39074dc93de10000000a114084/frameset.htm
    Hope it helps.

Maybe you are looking for

  • [iPod 5G] Problems with Windows' iTunes keeping it synced.

    I've been struggling to get my iPod 5G working on my windows computer. This is what happens EVERY time: - I connect my iPod, it gives me "Cannot read the content of the iPod XXX...." - I Restore my iPod (have also formatted it completely several time

  • Why won't it (simple dataset) work!

    I'm trying to use spry to open a simple xml file. But all I get are the table headings. This is the xml: <xml version="1.0" encoding="UTF-8"> <dtable name='table1'> <datum> <name>Robby</name> </datum> <datum> <name>Bob</name> </datum> </dtable> </xml

  • I Can't make the Geocoder handle Canadian Postal Code properly

    Hi ! Does any one out there was able to approprietly setup Oracle Geocoder to properly return canadian postal code for a specific address in a dense urban area ? In Canada, a single street segment can have two different post codes when located in den

  • Save changes to a theme

    Is there a way to save the changes that you've made to a theme? I have created a podcast site and when I click new entry, it come up with the theme with the themes photo place holder. This means that I have to redo any changes that I have done to the

  • How to Know Concurrent Program Finish

    Hello, We are on Oracle EBS 11i10.2 and are creating a procedure that executes a Concurrent Program, and we need to know in this procedure when the Concurrent Program finishes, does anyone know how to do this? Thanks