Creating Rough Cuts from an Extension in Prelude CC 2014

I am building an extension panel using extension builder 3 for Prelude CC 2014 and want to have a button to create rough cuts from a selection of markers. After looking at the CSXS API I can see that the events which I would need to use, such as com.adobe.browser.event.CreateRoughCut only seem to be available in Library mode. Therefore is there no way, now or in the future that I can program the panel to create rough cuts in Prelude if I want to run in native mode?
Thanks,
Jonathan

Ok sorry, I get 25 FPS rough cut if I drag that clip onto the rough cut icon. I can't create the rough cut first and then add the clip to it.
Would be handy to be able to decide in advance.
Thanks!

Similar Messages

Error while creating Rough cut planning profile

Facing the following error while creating rough cut planning profile (mc35) in SOP for product group. "Work center x plant y does not exist for task list type 3". pls advise- do i need to create tsk list for product group? pls advise with tcode to be used.

pls check the (task list ) usage you have maintained in the Work center.
In OP45 , pls ensure that for the usage ,
task list type 3 (Rough cut planning profile) is included.
If it is not included there , pls include the TL type 3 for your usage and now the prob will get solved.
Regards.,
Sheik

Error while creating rough cut plannin profile using Info structure

Hi,
I got the following error while creating rough cut planning profile for Info structure,
Capacity planning is not possible for this info structure S504
Message no. MA489
Diagnosis
In the planning parameters for info structure S504, no key figure for capacity planning has been entered.
Procedure
If you want to capacity planning to be possible for this info structure, you need to enter a capacity key figure in the planning parameters for the info structure in the Implementation Guide.
The info structure which i used here is created by me. Can any one help me to overcome this error
Waiting for your replies
G.Muthamil Murugan.

Hi addy,
Thanks for your reply. I have maintained the following Info structure which I created,
Under characteristic I have maintained the following,
1.Sales Organisation.
2.Sales group
3. Sales office
4. Distribution channel
5.Division
6.Material
Under Key figure I have maintain the following,
1. Order items
2. Production
3.Sales
4. Stock level
5. Target stock level
6. Day's Supply
7. available capacity
8.Target days supply
I don t know where i did mistake. can you correct me.
Regards,
Muthamil Murugan.G

Rough cuts from Prelude lack audio source

Hey everyone,
this is my first project with a Prelude to Premiere Pro workflow and so far everything worked just fine.
Although after creating a couple of rough cuts in Prelude and sending them to Premiere Pro I am experiencing a problem with the imported audio:
All clips within a rough cut do not play back any audio even though they did in Prelude. I found out that after beeing sent to Premiere all clips seem to loose their audio track source.
So what I can do to relink my audio is to righclick->audio channels -> choose the right source. If I want to do this for multiple clips at once it will only work for clips shot with the same camera / format / channel names.
As I am working with footage of three different cameras I am trying to understand what's going on.
Has anyone of you experienced a similar issue?
Thanks for your help.

Xoxidine,
Prelude CC, the new version that has the new feature to automatically conform clips after ingest, will be shipping June 17. http://www.adobe.com/products/prelude.html
As to forcing a reconform, please try this:
Quit Prelude
Clear out your Media Cache Files folder, or if you can determine specifically the files to delete-- they're named in such a way you can tell which files go with which clips surgically remove the files for the clips you want to reconform
Mac: delete the .cfa and .pek files located in ~/Library/Application Support/Adobe/Common/Media Cache Files/
remember "~" indicates your Home directory. On my system this is located at /Users/wplate
another point: On Lion and Mtn Lion the Library folder is hidden by default. Hold the Option key while selecting the Go menu in the Finder and "Library" appears. Choose that and a window pointing to ~/Library appears
Win: delete the .cfa and .pek files located in C:\Users\<your user>\AppData\Roaming\Adobe\Common\Media Cache Files\AppData is a hidden folder. Once I was in \Users\Wes I then clicked into the address bar to type the AppData name and after hitting Enter that directory was opened.
It is also possible your media cache files are set to be elsewhere. The setting is in the Prelude preferences in the Media category.
Relaunch Prelude
Open the clip again, it should reconform
I tested this with Prelude CS6 on both Mac and Win and it worked for me on both platforms.

Creating "rough cut"

I don't know how else to ask this question or how to find it if it has already been answered. So if this is posted incorrectly please let me know and I will amend my mistake.
I am trying to get a low res version of a project from across the country. A friend has been working on a documentary for the last year and wants me to take a look before she finalizes things.
She wants to render the whole thing and overnight me a DVD.
This seems a bit overkill to me. With 5gigs of storage in my MobileMe, she should be able to make some sort of "rough cut", and then drop it into my mobile me.
Am I wrong?
IF this is possible step by step instructions would be very helpful as she is not very tech savvy and I am amazed that she has gotten this far....... she should have help from from her "college friends", but they don't know final cut all that well..... or are not experts.
thank you.

Depends how long the cut is but I often export H.264 versions and just e-mail them. I have to keep what I send to under 12 Mgb so it's usually just a question of adjusting the export parameters a few times, depending on the show length, to get the right size.
rh

Can I create many short rough cuts from one large vob or mts file?

If so, how? I am new to editing and using CS6 Premier Pro and Prelude.

As JStrawn points out, Importing the full Clip into the Project, but only using what you need from it, where you need it, has no drawbacks. The actual AV file is NOT physically input to the program, in any way. What happens with an Import, in very simple terms, is that PrPro links to that file, where it resides on your system, when you do the Import. There is only a link to that AV file, and that is written into the PRPROJ (the Project file) file in XML language. The file stays where it was, and only a line, or two of code is written. That is why a PRPROJ file is so small, compared to a media file - it's only lines of code, and contains zero media. Even Titles, which ARE included in the PRPROJ file, are but instructions, until one Exports.
The three methods mentioned above are really quite similar, but just reflect a slightly different workflow. I like the Source Monitor and setting the In & Out Points, then just dragging (I guess I mouse more than use keyboard shortcuts) an Instance of that file, now Trimmed, onto my Timeline. There are a few times, when I do use the Razor, but not that often. I seldom use the Trim Monitor w/ it's keyboard shortcuts, but many could not live without that - personal choices.
What one sees on the Timeline are representations of the various segments of that original longer Clip. But they are basically for display - to give the editor a visual to work with. Those Clip Instances do not yet really exist, and are only XML instructions. When one goes to Export the Timeline, PrPro reads those instructions, follows the link to that original file, and extracts the data that it is instructed to use, and essentially copies just THAT data to the new file, that PrPro is outputting. It is at that point, that something new exists, created from the chosen data in that original file, processed through the instructions written to the PRPROJ file.
Now, there ARE some times, where one would want to create Sub-Clips, or even Export the Trimmed Clips as separate, discrete files, but from what I gather, you do not have a need for that, so you can save yourself a couple of steps.
One possible use would be if one is hardpressed for HDD space, and they wished to actually cut up the long file, Export to individual files, and then Delete that original file. However, and even there, one could use the above techniques to edit the long file, and Export that edited version as a separate file, then Deleting that original longer file. Caveat - if one does that, then that Project is basically "done," as the Imported media file, the original long one, would no longer exist, as it has been Deleted.
Good luck, and hope this helps,
Hunt

Rough cut planning

Dear Experts ,
I have done foll setting :
Work center ugage : all task list type ( 009)
OPU3 : SelID:roughPlng 03
OPU5 : RCutPlg horizon 100
SelID:roughPln 03
Sche and general cap req is activated .
Created rough cut profile in mc35 after putting work center its not automatically proposing time . I mean SOP is done and it has not transferred to demand ( AS capacity planning is not done )
Secondly when I go to MC82 and check capacity situation there is blank , I mean show option is gray not selectable .
Please help .
Neal

My steps in Mc35
Entered prod group , plant + execute
Time span 30 days
Status 4
From Lot Size 1 to 9999
Usage 1
Clicked on lense Work center,Plant,Unit- ( tried min and HR )
after entering this there are just blank columns coming ahed of it and system wont let me save without entering values in those columen , I am suppose to enter some time or system will propose according to me SOP plan ?
Neal .

Rough Cut Issues in Premiere

REALLY FRUSTRATED!
So I send my rough cut to Premiere, then I drag my rough cut to the timeline, all seems to be fine. But if I delete that rough cut from the timeline it is no longer available to bring into the timeline again, it is just blank and error message "No content in sequence In/Out Range".
I've tried it with the "write XMP ID to files on import" checked and unchecked. I don't even know if this has anything to do with the rough cut, ugh!
Also, if I rearrange the bins I sent from Prelude in any manner whatsoever the rough cut is lost!
So frustrated I am beginning to think I have wasted months of time making rough cuts in Prelude,

Hey Michael,
Thanks for getting back to me so soon Sorry, I have to give you links to imgur for pictures of my desktop. I tried everything people suggested, but I still cannot get the insert link or insert photo on the forum to work, ugh!
The problem I was having yesterday is that the rough cut sequence file remains in the Premiere Pro Project Panel after deleting it from the timeline, but does not contain anything once it is deleted from the timeline, the thumbnail becomes blank/black and the rough cut footage cannot be brought back into the same or a different timeline without going back to Prelude and resending the rough cut and associated footage to Premiere. I was getting "No content in sequence In/Out Range".
http://i.imgur.com/74uBHvI.jpg
However, this morning I start up my computer, reopen Prelude and start Premiere project from scratch. Then I sent the same rough cut as yesterday to Premiere. This time when I drag the rough cut to the timeline Premiere makes a new duplicate sequence. That did not happen yesterday. I have no idea why as all settings are identical.
http://imgur.com/L0KirVB
*Note I put the additional sequence on the timeline cause I wanted to see if it was identical.
So, my next step was to delete the rough cut from the timeline and bring it back into the timeline. I get the same message "No content in sequence In/Out Range".
Then I repeated everything again, only this time if I double click the rough cut to bring it into the timeline instead of dragging it. It does not make a duplicate sequence.
http://i.imgur.com/YlfvQ2h.jpg
Then I delete the rough cut in the timeline and try to bring it back in to the timeline and get the "No content in sequence In/Out Range" message. So in order to have access to that rough cut again I have to go back to Prelude and have it send the roughcut and associated footage back into Premiere.
http://i.imgur.com/iQ9ozDY.jpg
All the footage used in the rough cut sent over to Premiere from Prelude is still accessible in the project panel after deleting the rough cut from the timeline. It is the rough cut itself that is no longer available once it is ingested into the timeline and then deleted.
My real concern in working with my rough cuts from Prelude is the stability of the rough cut. Once I start working within the roughcut footage and I decide to add, edit or delete clips am I going to have issues. If I have to start going back to Prelude to resend rough cuts then this will be a huge issue and it would just be better for me to start with my original footage as opposed to the rough cuts.
I hope this gives you a better understanding of the problem. If you need any more info or if you need to do remote access to my system please let me know. Thanks again!

Rough -cut plan with capacity requirment calculation

Hi all,
We checking SOP with rough-cut plan
We created Rough-cut profile in mc35 for our bottle neck work center with base quantity -1 and time span - 1
then we selected new work center (there is no existing cap req). and assigned base unit measure:min.
and we assigned 1min for each day and saved the profile.
Now we went to mc88 and checked the material's active version production plan. (period split- DAY)
in View -> capacity situation -> rough cut planning -> show.
System calculates some capacity requirement for our production plan.
Say for tomorrow's date i given 1000 qty - production plan.
but system showing capacity req
Work center: TESTWC3                  Plant: 0001         Capacity: 001
Info structur Material          Plant   Order qty     Unit     From              To          Capacity reqmts      Unit
S076            TESTFERT14    0001 1000.000       EA    29.01.2010 11.02.2010   9000.000              MIN
with 9000min and cap load more than 652% ( Actuallly it has to show 1000min as per rough cut plan profile)
Our available capacity of work center per day - 1380 min
We cant understand the capacity requirement calculation in MC88..
Help us out...
Thanks in advance

Hi,
Rough cut planning is genrally done for the group of material say product group, group of workcentre rather than individual material or workcentre.
As standard, in resource table whatever the value you enter that corresponds to no. of days. Each column represents one day.
Pl. refer this link for clear understanding of the same.
http://help.sap.com/saphelp_47x200/helpdata/en/a5/63212e43a211d189410000e829fbbd/frameset.htm
Madhava

Rough cut planning in SOP for resource levelling

Hello,
I am trying rough cut planning in SOP.
I have created rough cut planning profile for a product group by using MC35.
The task list exits for the product group.
In task list , work centre is maintained and the same is given while creating the rough cut profile.
This product group contains some part number.
When I try Views--->capacity situation -> rough cut planning--->show.
System gives error that -
> No resource load found.
<u><b>Diagnosis given by system is as follows,</b></u>
This situation may be caused by one or more of the following:
     No PP task list (rough-cut planning profile, rate routing, or routing) corresponding to the Customizing selection criteria has been defined for this material/product group at this scheduling level.
     Resources planning has not been configured appropriately in Customizing.
     The information structure which you are planning has not been configured appropriately in Customizing.
System Response
No capacity load could be determined.
Procedure
1. Check that a PP task list exists for this material/product group.
2. Check that a lot size range has been maintained in the PP task list.
3. Have your systems administrator check and, if necessary, change the resources planning settings in Customizing for Sales & Operations Planning (the steps "Scheduling levels" and "Routing selection").
4. Have your systems administrator check that capacity planning has been defined for this information structure in Customizing.
Please let me know how to maintain the resource planning settings for scheduling level and routing selection.
Waiting for your reply.
Regards,
Ravindra Deokule

Hi Ravindra,
You can use t.code mc84 to create a product group.
Pl follow the following steps to do SOP with product group.
1. Create a Product group in tcode MC84.
Enter a percentage for material say X & Y to be produced. X 40% & Y 60%. Total qty will be split in the ratio as per the %.
2. Create Production Plan in tcode MC81.
Enter the sales plan qty.
Then goto menu,edit & choose create Prodn Plan synchronus to sales.
3. Create Rough cut Planning Profile in tcode MC35.
4. Enter the Status ,Usage & lot size.
5. Choose resources tab & then choose work center & enter work center name which you consider as a bottle neck & then enter the unit of measure as 'min'.
6. Use MC82,
Choose inactive version and select your version.
then goto menu->views> capacity situation>show
7.Check for over loads & adjust your qty acordingly.once the load becomes 100 % save.
8. Change the inactive version to Active version in tcode MC78.
ie in the version enter the inactive version & in the target version enter'A00'
9.In mc82 choose active version, you can see that the plan is activated now.
10.In the menu choose extras & transfer to demand mgmnt.
11.You can see the requirement in the md62 transaction.
12.Then run mrp.
Also regarding the unit of measure in t.code mc35,
If you select your resource as 'workcenter' & choose min or hour & then you enter 1(eg) in the first field against the work center. This means it takes 1 min or hour to produce 1pc(base quantity) in that particular workcenter(bottleneck workcenter)
Reg: Capacity calculation in mc87,follow the eg as above.Enter 1 min as time & base qty as 1 in mc35. Then check in mc87, you will get the load in %. ie if your work center is permitted to work for 8 hours/day & you pass a production plan of 480, then your load will match for 100%.
Regards,
Senthilkumar

Rough Cut Planning Profile-by Capacity category

Hai,
I am creating Rough Cut Planning Profiles in ECC6.0 for use in Standad SOP (S076). In MC35, I don't see a place where I can enter by Work center category- like I want both Machine and Labour categories as I have different times for each category.
{ when I view the rough-cut capacity situation in MC82, system displays both categroies, but it is based on only the hours I maintained for one of the categories- how do I maintain for both categories?}
Thank you in advance:)
Sonali
Edited by: Sonali on Apr 28, 2009 3:05 PM

Hello Sonali,
Rough cut capacity planning is used only for bottle neck resources.Analyze your process and you will come to know for the product group or material which category or machine is bottleneck.
Create a rought cut planning profile for a production line or Workcenter or PRT or Cost(Relative cost not product cost).
PS:Roughtcut capcity planning should not be used for all the workcenters.
Thanks,
Raj

Costs in Resource Leveling of Rough-cut planning Grayed out

Hi PP Gurus,
I have created PG and Rough-cut planning profille.
In MC81-Create Rough cut planning, I have been not able to see Costs under Views->Capacity situation->Rough cut planning->Costs.
Because Costs are greyed out.
Please Help me.
Thanks in Advance
Shiva

closed

ANN: Dreamweaver CS5 with PHP: Training from the Source - Rough Cuts

If you would like to get early access to my next book "Adobe Dreamweaver CS5 with PHP: Training from the Source", the first six chapters (of 12) are now available as Rough Cuts in Safari Books Online.
If you have a Safari Library subscription, you can view the chapters free of charge, and see new ones as they're added. Without a subscription, you can get access to the book in PDF format for $34.99, including the finished ebook version when the book is complete. You can also opt for the Rough Cuts PDF and Print bundle for $67.48. The print version is expected to be released in early August.

FIXED!!
1)
i finally did get the message problem was with:
$mailhost='ssl://mail.domain.com';
ssl:// was just nonsense and been removed
2)
'auth' => 'true' was changed to 'auth' => 'login'
3)
for bluehost i got information that it was tls secure connection protocol not ssl
'ssl' => 'tls'
4)
port used '25' not 465.
Didnt still tried 26 and 465 maybe they would work too.

Why won't my Prelude Rough Cut material appear in Premiere Pro?

I've done everything accordingly. I have my Rough Cut ready, but everytime I go to send it to Premiere Pro, it fails to do so.
What am I missing here? Is it my directory location that's the problem? I have no idea as to why it won't do as I say.

I'll get the image once I can obtain it - it's not appearing atm.
I have CS6 for both programs.
Yes, nothing happens when it's empty. There is a failure with the connection between the softwares. I also had this problem with trying to transfer files from Premiere to Speedgrade a while back. I never did find out the problem.
Is there a central hub or connecting device that provides this operation, because I have a feeling that that is what's stopping it from operating correctly.

Rough cut planning profile

Hi Gurus,
Our scenario is we have two plants.The sales orders and the PIRs will be created in the Plant 1 and these requirements will be transferred as Stock transport orders to plant 2(with special procurement key) .All the materials will be manufactured in plant2.BOMs and routings are maintained in Plant 2.
In this case if i want to maintain the rought cut planning profile , how can i map the scenario.
Please help me in this.
Thanks in advance,
Ravi

Hi Krishna,
There are two plants.
Plant 1
Plant 2
We will be creating PIRs in Plant 1.There is a special procurement key maintained for material which will say stock transfer from plant 2.
The below are the steps:
1. Create PIRs in the plant1.
2. Run MRP
3. STO req. will be created in Plant 1 against the PIRs.
4. As the special procurement key is maintained in material master Planned orders will be generated in plant 2 against these STOs from plant1.And production will be done in plant 2.
So, now if i want to do rough cut plannig profile how can i proceed.
Thanks,
Ravi

Creating Rough Cuts from an Extension in Prelude CC 2014

Similar Messages

Maybe you are looking for