Creating rough delivery in VL41

Hi
First of all is rough delivery only applicable for SAP Retail.
Im trying the same in ECC 6.0
Im trying to create a rough delivery in VL41 and gave the vendor plant in the selection screen and selected a PO and presssed enter. Im getting a error msg saying 4500000211 0010 Partner determination procedure does not exist in the log.
Any ideas to resolve will be helpful
Reg
Raja.

Yes, it might be one reason. It is mentioned in the error message (VL561).
Please create the ship-to party, extend it to the plant's sales area and assign it to the vendor master. /plant sales area is in V_001W_IV/
Please try it and if still you get the errors come back. (Please read the error message and check all the thing described there)
Regards,
Csaba

Similar Messages

  • Error while creating Rough cut planning profile

    Facing the following error while creating rough cut planning profile (mc35) in SOP for product group. "Work center x plant y does not exist for task list type 3". pls advise- do i need to create tsk list for product group? pls advise with tcode to be used.

    pls check the (task list ) usage you have maintained in the Work center.
    In OP45 , pls ensure that for the usage ,
    task list type 3 (Rough cut planning profile) is included.
    If it is not included there , pls include the TL type 3 for your usage and now the prob will get solved.
    Regards.,
    Sheik

  • Unable to create single delivery through scheduling agreement - MM37

    Dear All,
    In our scenario, we are creating scheduling agreement with tcode - ME37 for multiple material and for each material we create multiple delivery creation date schedule with past date (ME38).
    Then we create delivery with VL10D, we put scheduling agreement number in purchase order tab - purchase order field & Execute.
    It creates multiple deliveries but we want to have single delivery.
    We implemented SAP note - 377501 , but is is still not working.
    Kindly advice,
    Regards,
    Bhushan.

    Dear Lakshmipathi,
    Thanks for your reply.
    Yes, I searched the forum & got list of reasons for delivery split but wasn't able to identify exact reason.
    But first I want to confirm,
    1. Whether is it correct process to create delivery through VL10D for scheduling agreement (ME37) ?
    2. Also to overcome delivery split, we implemented SAP note - 377501 but did not worked.
    Therefore I am thinking to implement SAP Note -  386340, Kindly advice.
    Regards,
    Bhushan.

  • FM to create subcontracting delivery lines

    Hi Folks,
    We are using one custom function module to create subcontracting delivery lines. Inside this custom FM, we are using ME_COMPONENTS_MAINTAIN function module first to maintain the components and then ME_UPDATE_SCHEDULES_DISPO to create delivery lines for the schedule agreement. Actually the ME_COMPONENTS_MAINTAIN is displaying a screen where you have to maintain the material, wquantit etc. manually. But we dont want that. We need to create subcontracting delivery lines without manual intervention. Is there any FM available for this requorement? Or else can I use ME_UPDATE_SCHEDULES_DISPO directly to create subcontracting delivery lines? I know this query is more functional than technical. Kindly provide your inputs.
    Thanks,
    Mani

    http://scn.sap.com/thread/175138
    (about halfway down, Stefan Berger's post)
    I've not completely tested this yet, but whilst investigating a similar problem, I came across the above thread. ME_COMPONENTS_MAINTAIN has a paramater "I_FCALL" which if you set to 'X' doesn't call the screens, and just runs in background.
    You can also see the variable population by putting a breakpoint in the top of this fm, and then running the frontend transaction.

  • How  to create one delivery for two sales orders?

    Hi Experts,
    I need to create one delivery for two sales orders. But it fails.
    The route, shipping point, ship to party are same for both orders but INCOTERMS are different.
    Delivery date, Good issue date, loading date,material availability date, transportation planning date for 1st order is 12/07/11 and for second order is 14/07/11.
    I have created delivery on 14/07/2011 but the delivery is created for 1st order only, the second order is missing in the delivery.
    It not happened because of incorterms.? different dates
    Kindly help regarding this.
    Thanks
    Raghu

    Hi
    To understand splitting behavior, see SAP Note 546668 - FAQ: Delivery split when creating deliveries. And yes, incoterms happens.
    I think that with the help of question 6 you can try to force the merging of SO. Then, see SAP Note 166397 - Delivery split according to customer field ZUKRL, and handling the field ZUKRL in a VOFM in the copy rule I think that you can try to do it.
    Finally See  Note 4505 - Duprec when adding delivery (VL04, VL01, VL10*) to avoid problems while you are merging.
    Regards
    Eduardo

  • How to create one delivery for multiple sales order

    Hi!! Friends,
    Can some one explain the steps to be followed in creating one delivery for multiple sales order in SAP SD.
    Regards
    AKASH
    Message was edited by:
            AKASH TAMBI

    Hi.,
                  You can combine different orders in to one delivery ,But for the customer Order combination should be checked in  the sales area data of the shipping tab,we can combine orders but the ship to party,Route,Inco terms,Shipping date,shipping point should be same,you can do in T.code VL04 & VL10
    REWARD if helpfull
    Thanks & Regards
    Narayana

  • Not able to create the delivery document in '000' client of IDES

    Dear Experts,
                           I am facing a problem while creating an sd process flow in the client '000' of SAP IDES system. I am working over SD CIN. Previously I received an error while generating sales order. The error was stating that certain entries were missing in the table CRMPAROLTP & it was the error message number V3, 302.
    For that I went to SM30 & defined 'CRM_RELEASE' (under parameter name) & '600' (under parameter value), which solved my problem. Now I received another problem while creating the delivery document which is as follows:
    Problem :   "Message no. B2 001 : Local logical system is not defined"
    Kindly assist me in sorting out this problem. I checked the stock level at MMBE, but the stock was not reduced with the quantity as was specified under the delivery document & at the same time the document number was also not available for further processing.
    What to do?
    Thanks & regards,
    M.S.Kumar.

    Hi Prashant,
    Thank you very much for resolving my problem. Meanwhile I first went to trx. code 'BD54' &, there I defined a new logical system & ultimately assigned that logical system to client at 'SCC4' as specified by you. And my problem got resolved.
    Thank you very much once again.
    With regards,
    M.S.Kumar.

  • Error occuring while creating a Delivery for Stock transport order

    Hi,
    I am getting error while creating the delivery for thr stock transport order.The error message is given below.
                                                                                    Error Log for coll. run 0001248218                                                                               
    4       6000038321 000010 Only 0 ST of material F784100 available                                   
         4       6000038321 000010 An item with no delivery quantity is not permitted. Item will be deleted. 
         4       6000038321 000020 Only 0 ST of material F784100 available                                   
         4       6000038321 000020 An item with no delivery quantity is not permitted. Item will be deleted. 
         4       6000038321 000030 Only 0 ST of material F784100 available                                   
         4       6000038321 000030 An item with no delivery quantity is not permitted. Item will be deleted.                                                                               
    The stocks are present in the plant.
    Can anyone help me to solve this issue?
    Thanks
    Srinivasan

    Hi,
    Check in
    SPRO--IMG-MM-IM and PI---stock determinationassign stock determination in applications---Inventory management
    Check for 641 or 647,there is a SD rule assigned.
    Regards,
    Deepak.

  • Error while creating rough cut plannin profile using Info structure

    Hi,
    I got the following error while creating rough cut planning profile for Info structure,
    Capacity planning is not possible for this info structure S504
    Message no. MA489
    Diagnosis
    In the planning parameters for info structure S504, no key figure for capacity planning has been entered.
    Procedure
    If you want to capacity planning to be possible for this info structure, you need to enter a capacity key figure in the planning parameters for the info structure in the Implementation Guide.
    The info structure which i used here is created by me. Can any one help me to overcome this error
    Waiting for your replies
    G.Muthamil Murugan.

    Hi addy,
    Thanks for your reply. I have maintained the following Info structure which I created,
    Under characteristic I have maintained the following,
    1.Sales Organisation.
    2.Sales group
    3. Sales office
    4. Distribution channel
    5.Division
    6.Material
    Under Key figure I have maintain the following,
    1. Order items
    2. Production
    3.Sales
    4. Stock level
    5. Target stock level
    6. Day's Supply
    7. available capacity
    8.Target days supply
    I don t know where i did mistake. can you correct me.
    Regards,
    Muthamil Murugan.G

  • Error while creating inbound delivery

    Hi All,
    I get an error while creating inbound delivery from ASN
    "Error during conversion of unit of measure: UoM is missing -> ST BOR131
    Please help solve this issue.
    Thanks in advance
    Regards,
    Thiru

    hi,
    please maintain the uom  for tour material.
    or
    reffer this link
    Alternate Unit of Measure Conversion Rule Error
    /thread/2000551 [original link is broken]
    Thanking you.

  • Error while creating the delivery for STO

    Hi,
    While creating the delivery, an error is produced when i saw the log . It was as follows
    "An Item with no delivery quantity is not permitted. Item will be deleted"
    Its related to STO,. if STO contains around  100 items and error is for any single item system is not able to create the delivery for whole PO.
    Please guide as its an vey urgent issue will reward with suitable points.
    Regards,
    Vikram

    Hi
    while creating  delivery make that particular material's delivery quantity as 0. and do not  enter any picking quantity.
    that material will not be consider while making delivery.
    Regards,
    vijay

  • Error when Creating a delivery for an STO DEL

    I have a client that at first was getting an error about shipping point can not be determined.  I extended the sales view, and also created the Sales Org and division.  When I created the delivery it worked. Then when the client tested this, it did not work gets the error message when trying to create the delivery in VL10B that states Document is incomplete.  You can not save delivery.  Then I went to the material master and checked the settings on the sales org and sales division..for whatever reason it was not there, so I repopulated the information...It worked and went all the way through.  Now today...it gives me the same error message and the sales org division and everything is there.  I can not create a delivery. Any information or clue would be greatly appreciated.  I am testing all with the same material number, same plants, same info....

    Unfortunately I did not see anything in this note that would help it appeared to be talking about IM and QM. 
    I do agree there is some inconsistencies and I am just not sure where....None of this makes any sense as I said one day it will work and then the next time you try it, it gives the error message....I am so at a lost at this point...

  • Error while creating the delivery in ME2O

    Hi Gurus,
    when the shipping depeartment is trying to create the delivery in ME2o to send the components for subcontractor, we are gettign the error message
    Essential transfer parameters are missing in record:  000001
    Please heklp on this one?
    and as an ibservation i do see that this vendor is not setup as customer in vendor master in the purchasing data view of the vendor master. Is that the problem?
    thanks
    Anusha
    Edited by: anusha vemulapati on Oct 21, 2009 6:31 PM

    Yes, it might be one reason. It is mentioned in the error message (VL561).
    Please create the ship-to party, extend it to the plant's sales area and assign it to the vendor master. /plant sales area is in V_001W_IV/
    Please try it and if still you get the errors come back. (Please read the error message and check all the thing described there)
    Regards,
    Csaba

  • Error when trying to create a delivery note from a sales order -  Internal error (-2010) occurred

    Hi
    I am trying to create a delivery note form a sales order in B1 V9 PL8 and I am getting the following error -
    Internal error (-2010) occurred
    The code has been working but we seem to be getting problems now
    Can anyone suggest anything please ?
    Copy of the code attached
    Thanks
    Andy

    Hi Andrew,
    Try replacing this line:
    odel.Lines.BaseLine = lineno - 1
    with this:
    odel.Lines.BaseLine = oorder.Lines.LineNum
    Beni.

  • Issue while creating Outbound Delivery using Standard BAPI

    Hi all,
    I am trying to create an outbound delivery for a Sales order using the Standard BAPI - BAPI_OUTB_DELIVERY_CREATE_SLS.
    After giving the valid inputs for Sales order no and doc no, am getting an error as "No instance of object type OutboundDelivery has been created. External reference:" But when trying to create manually there is no problem. Please suggest what may be the issue and how to correct it?
    Regards,
    Vimala P

    Hi Vimala,
    I am trying to create outbound delivery using BAPI_OUTB_DELIVERY_CREATE_SLS & BAPI_DELIVERYPROCESSING_EXEC. But no success. Getting "No instance of object type outbound delivery has been created" in return.
    1) Delivery Type
    2) Delivery selection date
    Needs to be passed in import parameters.
    Could you please tell me what are all the parameters to be passed under tables tab in RV_DELIVERY_CREATE?
    Thanks in Advance..
    Regards,
    Rajasekar .M

Maybe you are looking for