Creating Sales Order trhough PS-WBS
Dear Experts,
I have two question;
1. I need to create sales order through WBS according to client's requirement. Can anyone explain how to create sales order from WBS.
2. Client wants to create sales order through WBS and trigger milestone billing plan from that sales order. but client wants to delivery according to normal sales order. My question, is it necessary to create two sales order for same material? I want to delivery from that sales order which is created through WBS. is it right decision?
I am waiting for your valuable suggestion.Thanks in advance.
Sorry about the below the site is acting up again. Anyways according to process it depends on how the configuration is setup.
In my experience I have seen that deliveries are done thru PS. One creates a Project Sales Order and assigns the WBS element number inside the item line for that material. If PS config is properly set the Billing Plan dates also get fetched and populated. Once it is assigned you can create invoices relating to the billing plan dates in order related billing. Note: You can create deliveries from PS or SD. I have no idea why you would create 2 sales order you did not quite explain why you would want to do that for?
Best of Luck
Ali Lozada
Similar Messages
-
Automatic creation of settlement rule while creating sales order
Hi Friends,
Can any one help me how to create settlement rule automatically while creating sales order i.e saving sales order. Is there any function module or any badi which can be used.. please suggest.
thanks
bobbyHi,
Here is the solution , First Create a sustitution by going into OPSN Transaction , only user exit say 'U902'
and write the form routine in Program named 'ZRGGBS000'
The code is below ,
*& Form U902
Automatic Generation of Settlement Rule For WBS and Company 4180
FORM u902.
Exit For Automatic Settlement Rule Creation for WBS Billing elements
IF sy-tcode = 'CJ20N' or sy-tcode = 'CJ01' or sy-tcode = 'CJ02'.
DATA lv_proj TYPE ps_pspid.
lv_proj = proj-pspid.
EXPORT lv_proj TO MEMORY ID 'PSPID'.
Calling YGPS_CJB1EXEC Program For Creating Settlement Rule
SUBMIT ygps_cjb1exec AND RETURN.
ENDIF.
ENDFORM. "u902
*& Program YGPS_CJB1EXEC
PROGRAM ygps_cjb1exec.
Automatic Generation of Settlement Rule For WBS and Company 4180
Called From Exit For Automatic Settlement Rule Creation for WBS Billing elements
DATA: bdcdata_wa TYPE bdcdata,
bdcdata_tab TYPE TABLE OF bdcdata,
itab TYPE TABLE OF bdcmsgcoll.
DATA :lv_currm LIKE bkpf-monat,
lv_curry LIKE bkpf-gjahr,
lv_prevm LIKE bkpf-monat,
lv_prevy LIKE bkpf-gjahr,
lv_proj TYPE ps_pspid,
lv_mode TYPE c,
lv_time TYPE sy-uzeit.
DATA :g_datfm LIKE usr01-datfm,
g_dd(2) TYPE c, " Day
g_mm(2) TYPE c, " Month
g_yyyy(4) TYPE c, " Year
g_sydatum(10) TYPE c.
IMPORT lv_proj FROM MEMORY ID 'PSPID'.
lv_mode = 'N'.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'SAPLKAZB'.
bdcdata_wa-dynpro = '1000'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_CURSOR'.
bdcdata_wa-fval = 'PRZB-VARIANT'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'PRZB-VARIANT'.
bdcdata_wa-fval = 'ZGPS0001'.
APPEND bdcdata_wa TO bdcdata_tab.
CALL FUNCTION 'GET_CURRENT_YEAR'
EXPORTING
bukrs = '4180'
IMPORTING
currm = lv_currm
curry = lv_curry
prevm = lv_prevm
prevy = lv_prevy.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'RKAUF-FROM'.
bdcdata_wa-fval = lv_currm.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'RKAUF-GJAHR'.
bdcdata_wa-fval = lv_curry.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=VARC'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'RKPSEL00'.
bdcdata_wa-dynpro = '1000'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_CURSOR'.
bdcdata_wa-fval = 'CN_PROJN-LOW'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'CN_PROJN-LOW'.
bdcdata_wa-fval = lv_proj.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'CN_PSPNR-LOW'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'CN_NETNR-LOW'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'CN_ACTVT-LOW'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'CN_MATNR-LOW'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '/00'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=SAVE'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=VBAC'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'SAPLSPO1'.
bdcdata_wa-dynpro = '0100'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=YES'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'SAPLKAZB'.
bdcdata_wa-dynpro = '1000'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'RKAUF-BATCH'.
bdcdata_wa-fval = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'RKAUF-TEST'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=RUN'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'SAPLKABA'.
bdcdata_wa-dynpro = '0210'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'KABA01-JNAME'.
bdcdata_wa-fval = 'CJB1_EXEC'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_SUBSCR'.
bdcdata_wa-fval = 'SAPLKABA'.
APPEND bdcdata_wa TO bdcdata_tab.
Extract the date format from the user settings
PERFORM f_get_dateformat CHANGING g_datfm.
Changing the current date format to User Profile Date Settings
PERFORM f_format_date USING g_datfm
sy-datum+4(2)
sy-datum+6(2)
sy-datum+0(4)
CHANGING g_sydatum.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'KABA01-STDAY'.
bdcdata_wa-fval = g_sydatum.
APPEND bdcdata_wa TO bdcdata_tab.
lv_time = sy-uzeit + 30.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'KABA01-STTME'.
bdcdata_wa-fval = lv_time.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'KABA01-PRIKZ'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=TAKE'.
APPEND bdcdata_wa TO bdcdata_tab.
Calling Transaction 'CJB1' for creating settlement rule
CALL TRANSACTION 'CJB1' USING bdcdata_tab MODE lv_mode .
IF sy-subrc = 0.
ENDIF.
*& Form F_GET_DATEFORMAT
This subroutine returns the date format in the user setttigs
<--P_G_DATFM Date Format
FORM f_get_dateformat CHANGING p_g_datfm. "#EC *
SELECT SINGLE datfm FROM usr01 INTO p_g_datfm
WHERE bname = sy-uname.
ENDFORM. " F_GET_DATEFORMAT
*& Form F_FORMAT_DATE
This subroutine returns the date as per the user settings
-->P_G_DATFM Date Format
-->P_G_MM Month
-->P_G_DD Day
-->P_G_YYYY Year
<--P_G_DATE Date
FORM f_format_date USING p_g_datfm
p_g_mm
p_g_dd
p_g_yyyy
CHANGING p_g_date. "#EC *
CONSTANTS: c_dot VALUE '.',
c_slash VALUE '/',
c_dash VALUE '-',
c_1 VALUE '1',
c_2 VALUE '2',
c_3 VALUE '3',
c_4 VALUE '4',
c_5 VALUE '5',
c_6 VALUE '6'.
DATA: l_day(2),
l_month(2).
l_day = p_g_dd.
l_month = p_g_mm.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = l_month
IMPORTING
output = l_month.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = l_day
IMPORTING
output = l_day.
CASE p_g_datfm.
WHEN c_1.
CONCATENATE l_day l_month p_g_yyyy INTO p_g_date
SEPARATED BY c_dot.
WHEN c_2.
CONCATENATE l_month l_day p_g_yyyy INTO p_g_date
SEPARATED BY c_slash.
WHEN c_3.
CONCATENATE l_month l_day p_g_yyyy INTO p_g_date
SEPARATED BY c_dash.
WHEN c_4.
CONCATENATE p_g_yyyy l_month l_day INTO p_g_date
SEPARATED BY c_dot.
WHEN c_5.
CONCATENATE p_g_yyyy l_month l_day INTO p_g_date
SEPARATED BY c_slash.
WHEN c_6.
CONCATENATE p_g_yyyy l_month l_day INTO p_g_date
SEPARATED BY c_dash.
ENDCASE.
ENDFORM. " F_FORMAT_DATE
thanks
bobby -
COPA - Multiple Sales Order with one wbs element. COPA does not reference
COPA - Multiple Sales Order with one wbs element. COPA does not reference of reference of sales order.
Hi All
Currently we are in process of implementation of project related to Club Service for one of the client.
Concept of this project is - there is "X" company engaged in supporting the different shared services for their client e.g. Client IBM - Shared Support Services of IBM is
u2022 IDM
u2022 Software Installation
u2022 Help Desk
u2022 Maintenance
Co.. "X' is performing these services for IBM. So for Co. "X" - IBM is one engagement. Like this way Co. X is performing such activities for many companies e.g. microsoft, HP, ABN AMRO etc.
Objective - Get the consolidate report from COPA (Customer wise/services wise/sales order wise e.g. IBM/HelpDesk/10002/10).
We propose a solution to create a project for each engagement and with WBS element. Each WBS element of different services e.g.
Project IBM Inc. 100.100
WBS Element 100.100.IDM
WBS Element 100.100.SoftIns
WBS Element 100.100.HelpDesk
WBS Element 100.100.Maintainance
For this engagement (IBM), we are creating a sales order with line items (for services) and account assignment is WBS element. In a sales order, there may be two lines for one services. In a particular period, there are many such sales orders for this engagement... Milestone billing/period billing is used depending upon the services rendered.
Now Cost Object will be WBS Element. So cost and revenue will posted to WBS and from this it goes to COPA. In a month of May 2009 two - sales order is booked with three different line items with account assignment is WBS element.
Sales Order Line Item No.....Item Account Assignment Revenue
10000 100 IDM 100.100.IDM 1000
10000 200 HELPDESK 100.100.HelpDesk 2000
10000 100 Maintenance 100.100.Maintainance 3000
Another Sales order booked with two different line items
10000 100 IDM 100.100.IDM 3000
10000 200 HELPDESK 100.100.HelpDesk 4000
Cost will be booked directly against WBS element.
In sales order level, there is no profitability segment, as cost object is WBS element.
Billing, revenue will be posted directly to wbs element, from this revenue and cost of sales goes to COPA.
Now in COPA,
1.There is only one line for WBS element ex. 100.100.IDM with revenue 4000 (combing both the sales order)
2.There is only one line for WBS element ex. 100.100.HelpDesk with revenue 6000 (combing both the sales order)
3.There is only one line for WBS element ex. 100.100.Maintainance with revenue 4000
In above case 1 & 2 we will not have reference of sales order and sales order line item in COPA table. There is only one line for this. So we can not have reporting to sales order level.
Is there any way by this the reference of sales order and sales order line will come in COPA for case 1 & 2.
Please help in this issue.
Regards
Abhay Dev
Ph:- 91-22-67782229
Cell:- 91-9819175185Hi,
For these case (multiple materials with different characteristics); have you consider going to next level of WBS Elements. Meaning; lets say currently you are assigning WBS "Engineering (which is a level 2 WBS)" to all the items in SO. Instead under "Engineering" create 2 or 3 level 3 WBS Elements as E1, E2 etc and assign them 1:1 to your sales order line items. This would eliminate the exit as welll as complex development option. And also will let you get all the data in COPA and in turn you can pull to BW as well for reporting. Just a thought.
Regards
Sreekanth -
Sales order assignment to WBS element
Can somebody tell me Where a Sales order is assigned to a WBS element?
I am aware that it is assigned to WBS element Field in Item details>>Account assignment Tab. But in this tab page on Sales Order screen, I am not able to see WBS Element field. I am able to see the WBS element field for FERT items but not for DIEN.
Can somebody tell me where exactly is this done so that I get the WBS element field populated in SO?
RgdsHi
Hope the following will fulfill u r requirement
1) What is WBS element?
2) What is the Tcode to get to that screen?
3) What is the need and pupose of WBS element?
4) Do we happen to work on Functional module during our implementaion project? 5) In what scenario/situation we will be working on WBS?
WBS is nothing but Work Breakdown Structure. It is mainly used in Project System (PS) module. Tcode : CJ20N
For any project defined we must have atleast one WBS. Within this WBS we can have networks. Networks are nothing but the series of activities. Material are used to perform the activities.
To explain in detail just consider one example:
Govt of india wants to have Roads to be build through out the india. So Project can be defined in sap as Connectivity.
WBS can be roads within different states like Roads for Gujarat, Karnataka etc.. i.e. WBS Gujarat, WBS Karnataka etc.
We can define different networks for these WBS like Road Between Ahmedabad to Surat or Between Bangalore to Belgham.
For this network we can have many activities like Land selection, Land Preparation, Road Building, Final finishing etc etc.
Hemals example was a good example. Project Systems comes into play only when the industrys business is based on projects like Construction companies, Engineer to Order scenarios. You may not see anyone using PS module for retail business. As Hemal explained in that example, you have a main project which is broken down into WBS elements. You can use the TC CJ20N to create the project and the WBS elements. Each WBS may have mutiple Networks associated and each Network may have multiple Network Activities as explained in the example by Hemal.
On the Sales Order, if your client is implementing PS module, you may have to attach the Sales Order to the WBS element it belongs to. WBS element is nothing but a bucket where all the activities belonging to that particular part of the project are captured. In the example, WBS Gujurat will tell you how many Sales Orders were created for the Gujurat sector, howmuch was spent on raw materials, whats the currect stock ([roject stock) available. How many Production Orders have been confirmed and howmany of them are getting confrmed in the future. How many invoices have been generated or how much revenue has been generated for that particular sector. How many deliveries have been made, what deliverables are still not accomplished.
So as you can see, PS is the center stage for all the modules that are being implemented like FI/CO, SD, MM, PP in this example. You can have cost centers and work centers defined. You can also have profit centers assigned at the plant level and get reports on varius selection criteria.
In a complete cycle of PS, like in reality, you initiate a project, you confirm/release the WBS/activities as per requirement, you execute the project and you close it.
One cannot initiate an activity unless it has been released by the project manager. Everything is accountable here and every dime is counted and at the end you know howmuch did you spend or make on each sector (WBS). Dont get confused with the term sector here I am using it just for the explaination purposes.
In one typical example, the company I was working with until not too long ago, had Deliveries from the Project (TC: CNS0). We never used VL01N. We used CNS0 to create a delivery and then used VL02N for confirming the picking quantity for the already created delivery document.
I hope this should help you at least a bit. Im not a PS consultant so I may not know a whole lot but trying going to CJ20N and you will see a lot yourself.
PS concultants are one of the highest paid consultants. Their supply is less and so is the demand. They are expected to understand real world business processes very well and they are generally the center stage of a project. -
hi
when im create sales order va01.than i have complete sales order i m click on incomplete log some missing item.two item missing this msg display.
1) profitabolity segement number this filed is is requer
2) wbs element this filed also active how to inactive this filed this filed is there account assignment main field display. please help mee....Hi,
This is due to incompletion procedure for the sales document type. You can remove these from the incompletion procedure for the sales document type in SPRO. Steps as below:
SPRO->Sales & Distribution->Basic Functions->Log og Incomplete Items->Define Incompleteness procedure.
Here, for change the prcedure for Sales -Item
Please close the message, if found useful.
Muraleedharan.R -
How to restrict the order reason in Tcode Va01 while creating sales order
Hi Gurus,
My requirement is
while creating sales order in VA01
if order type is Zvol
than the list of order reasons has to be restricted.
Now 15 are coming from OVAU tcode
I need only 5 from these.
Thanks & Reagrds
kals.Hi,
By doing the user exit in IW32 we achieved the requirement of restriction of maintenance order TECO functionality if any Service Entry sheet pending with reference of maintneance order.
regards
JKM -
Issue in creating sales order using BAPI's...?
Hi Guru's,
i had generated the sales order using the BAPI..but could please guide me how to declare the data declaratin same fields as globally and how to move internal table and how to append ....
thanks in advance...
REPORT z_bapi_salesorder_create.
Sales document type
PARAMETERS: p_auart TYPE auart OBLIGATORY.
Sales organization
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
Distribution channel
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
Division.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
Sold-to
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
Ship-to
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
Material
PARAMETERS: p_matnr TYPE matnr OBLIGATORY.
Quantity.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
Plant
PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
Data declarations.
DATA: v_vbeln LIKE vbak-vbeln.
DATA: header LIKE bapisdhead1.
DATA: headerx LIKE bapisdhead1x.
DATA: item LIKE bapisditem OCCURS 0 WITH HEADER LINE.
DATA: itemx LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx TYPE STANDARD TABLE OF bapischdlx
WITH HEADER LINE.
DATA: lt_schedules_in TYPE STANDARD TABLE OF bapischdl
WITH HEADER LINE.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
header-doc_type = p_auart.
headerx-doc_type = 'X'.
Sales organization
header-sales_org = p_vkorg.
headerx-sales_org = 'X'.
Distribution channel
header-distr_chan = p_vtweg.
headerx-distr_chan = 'X'.
Division
header-division = p_spart.
headerx-division = 'X'.
headerx-updateflag = 'I'.
Partner data
Sold to
partner-partn_role = 'AG'.
partner-partn_numb = p_sold.
APPEND partner.
Ship to
partner-partn_role = 'WE'.
partner-partn_numb = p_ship.
APPEND partner.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant = p_plant.
itemx-plant = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
APPEND item.
APPEND itemx.
Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty = 'X'.
APPEND lt_schedules_inx.
Call the BAPI to create the sales order.
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
EXPORTING
sales_header_in = header
sales_header_inx = headerx
IMPORTING
salesdocument_ex = v_vbeln
TABLES
return = return
sales_items_in = item
sales_items_inx = itemx
sales_schedules_in = lt_schedules_in
sales_schedules_inx = lt_schedules_inx
sales_partners = partner.
Check the return table.
LOOP AT return WHERE type = 'E' OR type = 'A'.
EXIT.
ENDLOOP.
IF sy-subrc = 0.
WRITE: / 'Error in creating document'.
ELSE.
Commit the work.
COMMIT WORK AND WAIT.
call FUNCTION 'BAPI_TRANSACTION_COMMIT'.
WRITE: / 'Document ', v_vbeln, ' created'.
ENDIF.*& Report ZAREPAS30
REPORT zarepas30.
DATA : gs_vbeln TYPE vbak-vbeln,
gs_order_header_in TYPE bapisdhd1,
gs_order_header_inx TYPE bapisdhd1x,
gt_order_items_in TYPE STANDARD TABLE OF bapisditm,
gwa_itab1 TYPE bapisditm,
gt_order_items_inx TYPE STANDARD TABLE OF bapisditmx,
gwa_itab2 TYPE bapisditmx,
gt_order_partners TYPE STANDARD TABLE OF bapiparnr,
gwa_itab3 TYPE bapiparnr,
gt_return TYPE STANDARD TABLE OF bapiret2,
gwa_itab4 TYPE bapiret2.
Sales document type
PARAMETERS: p_auart TYPE auart OBLIGATORY.
Sales organization
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
Distribution channel
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
Division.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
Requested Delivery Date
PARAMETERS: p_edatu TYPE edatu OBLIGATORY.
Sold-to
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
Ship-to
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
Material
PARAMETERS: p_matnr TYPE matnr OBLIGATORY.
Quantity.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
Plant
PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
gs_order_header_in-doc_type = p_auart.
gs_order_header_inx-doc_type = 'X'.
Sales organization
gs_order_header_in-sales_org = p_vkorg.
gs_order_header_inx-sales_org = 'X'.
Distribution channel
gs_order_header_in-distr_chan = p_vtweg.
gs_order_header_inx-distr_chan = 'X'.
Division
gs_order_header_in-division = p_spart.
gs_order_header_inx-division = 'X'.
Reguested Delivery Date
gs_order_header_in-req_date_h = p_edatu.
gs_order_header_inx-req_date_h = 'X'.
gs_order_header_inx-updateflag = 'I'.
Partner data
Sold to
gwa_itab3-partn_role = 'AG'.
gwa_itab3-partn_numb = p_sold.
APPEND gwa_itab3 TO gt_order_partners .
ship to
gwa_itab3-partn_role = 'WE'.
gwa_itab3-partn_numb = p_ship.
APPEND gwa_itab3 TO gt_order_partners .
ITEM DATA
gwa_itab2-updateflag = 'I'.
Line item number.
gwa_itab1-itm_number = '000010'.
gwa_itab2-itm_number = 'X'.
Material
gwa_itab1-material = p_matnr.
gwa_itab2-material = 'X'.
Plant
gwa_itab1-plant = p_plant.
gwa_itab2-plant = 'X'.
Quantity
gwa_itab1-target_qty = p_menge.
gwa_itab2-target_qty = 'X'.
APPEND gwa_itab1 TO gt_order_items_in.
APPEND gwa_itab2 TO gt_order_items_inx.
Line item number.
gwa_itab1-itm_number = '000020'.
gwa_itab2-itm_number = 'X'.
Material
gwa_itab1-material = p_matnr.
gwa_itab2-material = 'X'.
Plant
gwa_itab1-plant = p_plant.
gwa_itab2-plant = 'X'.
Quantity
gwa_itab1-target_qty = p_menge.
gwa_itab2-target_qty = 'X'.
APPEND gwa_itab1 TO gt_order_items_in.
APPEND gwa_itab2 TO gt_order_items_inx.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
order_header_in = gs_order_header_in
ORDER_HEADER_INX = gs_order_header_inx
IMPORTING
SALESDOCUMENT = gs_vbeln
tables
RETURN = gt_return
ORDER_ITEMS_IN = gt_order_items_in
ORDER_ITEMS_INX = gt_order_items_inx
order_partners = gt_order_partners.
Check the return table.
LOOP AT gt_return into gwa_itab4 WHERE type = 'E' OR type = 'A'.
EXIT.
ENDLOOP.
IF sy-subrc = 0.
WRITE: / 'Error occured while creating sales order '.
ELSE.
Commit the work.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
WRITE: / 'Document ', gs_vbeln, ' created'.
ENDIF. -
Report for Billing Document/sales order against project/WBS/Network
Hi Experts,
I want to see the Billing Document/Sales Order for Network/WBS in the projects.
Also want to see the cost transaction against the WBS and Network.
Suggest report which can show the details of the Sales Order/Billing Document against the WBS/Network.
Thanks and Regards
Ram KalelHi Ram,
Please check standard TCODE like
CN45N for Order list
CN54N for sales n Distribution documents
CN55N for sales document items
Thanks
Sunil -
Creating sale order by using BAPI
Hi,
My requirement is to create a inquiry(VA11), By using the Inquiry no as a input in report, i should create a salesorder using BAPI in which the datas should be flowed from inquiry to sale order. i did almost everything except the Pricing Condition.
I am fetching the pricing condition values from table KONV-KSCHL and passing the value via BAPI_SALESORDER_CREATEFROMDAT2 it creates saleorder. In the created salesorder, there are two same pricing conditions but different rate 1.) the price of the MATNR which is maintained 2.) the changed MATNR price in inquiry level,
i need the value which is changed in inquiry level that is 2nd value.
can anyone help me in this...REPORT ZSALESORDER.
<< Cut and paste without attribution from
create sales order using BAPI
removed >>
Edited by: Rob Burbank on Feb 24, 2009 10:43 AM -
Function module to add record into incompletion log of creating sale order
Hi SD Experts,
Do you know any function module / class to add record a into incompletion log procedure of creating / changing sale order process? We can do it through configuration OVA2 but I need to add more condition before adding to this table.
Thanks,
DuyHi,
Refer to The SDN Post : [user exit to update the incompletion log in sales order for pricing error |Re: user exit to update the incompletion log in sales order for pricing error].
Limitation : While creating Sales order, this works only for document type with external number range as the code required for updating XVBUV require Sales Order Number.
Regards
Vinod -
To create Sale Order , Delivery and then Billing Automatically .
hi all ,
I want to create a program which will create SALES ORDER , then make DELIVERY of it and then BILLING .
Also i want to restrict the sale order to be create of those CUSTOMER whose credit limit is exceed , which is maintain in FD32 tcode .
If i go with BDC for Sales order it creates the sales order with a warning message , which i dont want .
Is there any BAPI for doing this ?
I do have try to find out the customer whose credit limit are exceed so as to restrict them in Program itself , but do not find the table for credit exposure to compare it with credit limit .
Please give me your Suggestion .
Secondly , Which BAPI is suitable for DELIVERY and BILLING in 4.7 version .
Thanks .Hi,
Check these below BAPI's
BAPI_SALESDOCU_CREATEFROMDATA
BAPI_SALESORDER_CREATEFROMDAT1 Sales order: Create Sales Order
BAPI_OUTB_DELIVERY_CREATE_SLS Generates Delivery for Customer Order
BAPI_BILLINGDOC_CREATE Custimer Individual Billing Document : Create Billing Document
BAPI_BILLINGDOC_CREATEFROMDATA Create Customer Individual Billing Doc.
Regards,
Jyothi CH. -
Not able to create sales order using BAPI - BAPI_SALESORDER_CREATEFROMDAT2
Hi Experts,
I am not able to create sales order . I am using BAPI - BAPI_SALESORDER_CREATEFROMDAT2
to create sales order .I am passing external sales order number to the parameter
SALESDOCUMENTIN.
I am getting following error.
"524 |Only quantity 1 EA is allowed (Item 00001"
Here EA is UOM(Unit of measurement).
Below is the sample program through which i am trying to create the sales order.
*& Report ZSDC_SALES_TEST
report zsdc_sales_test.
*DATA: wa_bapi_header TYPE bapisdhd1.
Include Name - ZSDC_SALES_ORD_UPLOAD_TOP
Program Name - ZSDC_SALES_ORD_UPLOAD_1393
Program Title - Include for Data Declaration and selection screen
Created by - Lalitha W
Created on - 18-Nov-2008
Object ID - SD_C_1393_SALES_ORDER_UPLOAD
Request Id - SD3K905579
Description - This is a common INCLUDE for data declarations and
*selection screen details.
HISTORY
Date |Developer |Req by | Description |Reference ID
| | | |
| | | |
TYPE-POOLS
*TYPE-POOLS: truxs, abap, slis.
TABLES
*TABLES: t100.
TYPES
types:begin of ty_header,
auart(4) type c, " Sales Order Type
vkorg(4) type c, " Sales Organization
vtweg(2) type c, " Distrubution Channel
spart(2) type c, " Division
kunnr_1(10) type c, " Sold to Party
kunnr_2(10) type c, " Ship to Party
augru(3) type c, " Order Reason
bstkd(35) type c, " PO Number
bstdk(10) type c, " PO Date
ketdat(10) type c, " Required Delivery Date
zterm(4) type c, " Payment Terms
inco1(3) type c, " Inco Terms -1
inco2(28) type c, " Inco Terms -2
prsdt(10) type c, " pricing date
waerk(5) type c, " Document Currency
vkbur(4) type c, " Sales Office
vkgrp(3) type c, " Sales group
pltyp(2) type c, " Price List type
kdgrp(2) type c, " Customer Group
bstkd_e(35) type c, " Ship-to-party PO number
submi(10) type c, " Collective Number
bname(35) type c, " Name
ihrez(12) type c, " Your Reference
kschl_1(4) type c, " Condition Type
kbetr_1(11) type c, " Amount
kschl_2(4) type c, " Condition Type
kbetr_2(11) type c, " Amount
kschl_3(4) type c, " Condition Type
kbetr_3(11) type c, " Amount
partner_1(25) TYPE c, " Partner(Bill To Party Number)
partner_2(25) TYPE c, " Partner(Payer Number)
partner_3(25) TYPE c, " Partner(Sales Responsible Number)
partner_4(25) TYPE c, " Partner(Order admin)
partner_5(25) TYPE c, " Partner(Contact person)
partner_1(10) type c, " Partner(Bill To Party Number)
partner_2(10) type c, " Partner(Payer Number)
partner_3(10) type c, " Partner(Sales Responsible Number)
partner_4(10) type c, " Partner(Order admin)
partner_5(10) type c, " Partner(Contact person)
tdspras_1(2) type c,
text_1(500) type c, " Text Before Items Z012
tdspras_2(2) type c,
text_2(500) type c, " Invocie Up Z034
tdspras_3(2) type c,
text_3(500) type c, " Invocie Down Z035
tdspras_4(2) type c,
text_4(500) type c, " Customer Reference Continue Z018
tdspras_5(2) type c,
text_5(500) type c, " Dispatch Marks/ Order Z019
tdspras_6(2) type c,
text_6(500) type c, " Ordered By Z003
tdspras_7(2) type c,
text_7(500) type c, " Sales Parameters Z002
kvgr1(3) type c, " Industry
kvgr2(3) type c, " customer BU
end of ty_header.
types: begin of ty_item,
bstkd(35) type c, " PO Number
bstdk(10) type c, " PO Date
bstkd_e(35) type c, " Ship-to-party PO number
posnr(6) type c, " POSTION NUMBER
matnr(18) type c, " Material Number
kwmeng(18) type c, " Order Quantity
pstyv(4) type c, " Sales doc. item categ
kursk(18) type c, " EXCHANGE RATE****
ffprf(8) type c, " DIP PROFILE
werks(4) type c, " Delivering Plant
vstel(4) type c, " SHIPPING POINT
lgort(4) type c, " STORAGE LOCATION
route(6) type c, " Route
kurrf(18) type c, " EXCHANGE RATE-FI
ntgew(18) type c, " Net Weight
brgew(18) type c, " Gross Weight
gewei(3) type c, " Weight Unit
prctr(10) type c, " profit center
abgrs(6) type c, " RESULT ANALYSIS KEY
kalsm_k(4) type c, " COSTING SHEET
kschl_1(4) type c, " Condition Type
kbetr_1(11) type c, " Amount
kschl_2(4) type c, " Condition Type
kbetr_2(11) type c, " Amount
kschl_3(4) type c, " Condition Type
kbetr_3(11) type c, " Amount
text_1(500) type c, " material Text 0001
tdspras_1(1) type c,
text_2(500) type c, " Pr Text 9001
tdspras_2(1) type c,
end of ty_item.
types: begin of ty_schedule_line,
bstkd(35) type c, "PO number
bstdk(10) type c, "PO date
bstkd_e(35) type c, "Ship-to-party PO number
posnr(6) type c, "sales doc.Item
etdat(10) type c, "Schedule line date
wmeng(2) type c, "Order Quantity
end of ty_schedule_line.
types: begin of ty_err ,
auart(4) type c, " Sales Order Type
vkorg(4) type c, " Sales Organization
vtweg(2) type c, " Distrubution Channel
spart(2) type c, " Division
kunnr_1(10) type c, " Sold to Party
kunnr_2(10) type c, " Ship to Party
augru(3) type c, " Order Reason
bstkd(35) type c, " PO Number
bstdk(10) type c, " PO Date
ketdat(10) type c, " Required Delivery Date
zterm(4) type c, " Payment Terms
inco1(3) type c, " Inco Terms -1
inco2(28) type c, " Inco Terms -2
prsdt(10) type c, " pricing date
waerk(5) type c, " Document Currency
vkbur(2) type c, " Sales Office
vkgrp(3) type c, " Sales group
pltyp(2) type c, " Price List type
kdgrp(2) type c, " Customer Group
bstkd_e(35) type c, " Ship-to-party PO number
submi(10) type c, " Collective Number
bname(35) type c, " Name
ihrez(12) type c, " Your Reference
kschl_1(4) type c, " Condition Type
kbetr_1(11) type c, " Amount
kschl_2(4) type c, " Condition Type
kbetr_2(11) type c, " Amount
kschl_3(4) type c, " Condition Type
kbetr_3(11) type c, " Amount
partner_1(25) type c, " Partner(Bill To Party Number)
partner_2(25) type c, " Partner(Payer Number)
partner_3(25) type c, " Partner(Sales Responsible Number)
partner_4(25) type c, " Partner(Order admin)
partner_5(25) type c, " Partner(Contact person)
tdspras_1(2) type c,
text_1(500) type c, " Text Before Items Z012
tdspras_2(2) type c,
text_2(500) type c, " Invocie Up Z034
tdspras_3(2) type c,
text_3(500) type c, " Invocie Down Z035
tdspras_4(2) type c,
text_4(500) type c, " Customer Reference Continue Z018
tdspras_5(2) type c,
text_5(500) type c, " Dispatch Marks/ Order Z019
tdspras_6(2) type c,
text_6(500) type c, " Ordered By Z003
tdspras_7(2) type c,
text_7(500) type c, " Sales Parameters Z002
kvgr1(3) type c, " Industry
kvgr2(3) type c, " customer BU
message(600) type c,
end of ty_err.
types: begin of ty_t685a,
kschl type kschl,
krech type krech,
end of ty_t685a.
INTERNAL TABLES
***header
data: g_krech_1(4) type c, " Calculation type for condition
g_krech_2(4) type c, " Calculation type for condition
g_krech_3(4) type c. " Calculation type for condition
g_krech_4(4) TYPE c, " Calculation type for condition
g_krech_5(4) TYPE c, " Calculation type for condition
g_krech_6(4) TYPE c, " Calculation type for condition
g_krech_7(4) TYPE c, " Calculation type for condition
g_krech_8(4) TYPE c, " Calculation type for condition
g_krech_9(4) TYPE c, " Calculation type for condition
g_krech_10(4) TYPE c, " Calculation type for condition
g_krech_11(4) TYPE c, " Calculation type for condition
g_krech_12(4) TYPE c, " Calculation type for condition
g_krech_13(4) TYPE c, " Calculation type for condition
g_krech_14(4) TYPE c, " Calculation type for condition
g_krech_15(4) TYPE c, " Calculation type for condition
g_krech_16(4) TYPE c, " Calculation type for condition
g_krech_17(4) TYPE c, " Calculation type for condition
g_krech_18(4) TYPE c, " Calculation type for condition
g_krech_19(4) TYPE c, " Calculation type for condition
g_krech_20(4) TYPE c. " Calculation type for condition
Items
data: g_krech_item_1(4) type c, " Calculation type for condition
g_krech_item_2(4) type c, " Calculation type for condition
g_krech_item_3(4) type c. " Calculation type for condition
g_krech_item_4(4) TYPE c, " Calculation type for condition
g_krech_item_5(4) TYPE c, " Calculation type for condition
g_krech_item_6(4) TYPE c, " Calculation type for condition
g_krech_item_7(4) TYPE c, " Calculation type for condition
g_krech_item_8(4) TYPE c, " Calculation type for condition
g_krech_item_9(4) TYPE c, " Calculation type for condition
g_krech_item_10(4) TYPE c, " Calculation type for condition
g_krech_item_11(4) TYPE c, " Calculation type for condition
g_krech_item_12(4) TYPE c, " Calculation type for condition
g_krech_item_13(4) TYPE c, " Calculation type for condition
g_krech_item_14(4) TYPE c, " Calculation type for condition
g_krech_item_15(4) TYPE c, " Calculation type for condition
g_krech_item_16(4) TYPE c. " Calculation type for condition
data: it_t685a type standard table of ty_t685a.
data: wa_bapi_header type bapisdhd1,
wa_bapi_headerx TYPE bapisdhd1x,
it_bapi_item type table of bapisditm,
it_bapi_itemx TYPE TABLE OF bapisditmx,
it_bapi_cond type table of bapicond,
it_bapi_condx TYPE TABLE OF bapicondx,
it_bapi_partner type table of bapiparnr,
it_bapi_shdl type table of bapischdl,
it_bapi_shdlx TYPE TABLE OF bapischdlx,
it_bapi_order_text type TABLE OF BAPISDTEXT,
it_bapireturn type table of bapiret2.
data: wa_bapi_item like line of it_bapi_item,
wa_bapi_itemx LIKE LINE OF it_bapi_itemx,
wa_bapi_cond like line of it_bapi_cond,
wa_bapi_condx LIKE LINE OF it_bapi_condx,
wa_bapi_partner like line of it_bapi_partner,
wa_bapi_shdl like line of it_bapi_shdl,
wa_bapi_shdlx LIKE LINE OF it_bapi_shdlx,
wa_bapi_order_text like LINE OF it_bapi_order_text,
wa_bapireturn like line of it_bapireturn.
*DATA: zmode(1) VALUE 'N'.
data: it_header type standard table of ty_header.
*DATA: it_temp_header TYPE STANDARD TABLE OF ty_header.
data: it_item type standard table of ty_item.
*DATA: it_temp_item TYPE STANDARD TABLE OF ty_item.
data: it_err type standard table of ty_err.
data: it_fline1 type standard table of tline,
wa_fline1 type tline.
data: it_thead1 type thead.
data: it_fline2 type standard table of tline,
wa_fline2 type tline.
data: it_thead2 type thead.
data: it_fline3 type standard table of tline,
wa_fline3 type tline.
data: it_thead3 type thead.
data: it_fline4 type standard table of tline,
wa_fline4 type tline.
data: it_thead4 type thead.
data: it_fline5 type standard table of tline,
wa_fline5 type tline.
data: it_thead5 type thead.
data: wa_header like line of it_header,
wa_item like line of it_item,
wa_err type ty_err,
wa_bill LIKE LINE OF it_bill,
wa_bill1 LIKE LINE OF it_bill,
wa_iterr like line of it_err,
wa_t685a like line of it_t685a.
wa_bill_item TYPE ty_bill_item.
data: it_schedule_line type standard table of ty_schedule_line,
wa_schedule_line type ty_schedule_line.
data: sales_order_no type bapivbeln-vbeln.
data: ext_sales_order_no type bapivbeln-vbeln.
Variable to be used to separate the fields which are concatenated by a
runtime character
*DATA: g_tabchar(1) TYPE c VALUE cl_abap_char_utilities=>horizontal_tab.
*DATA: wa_truxs_t_text_data TYPE truxs_t_text_data.
*DATA: g_filename TYPE string,
g_path TYPE string,
g_fullpath TYPE string,
g_user_action TYPE i,
g_file_encoding TYPE abap_encoding.
*DATA : g_text(8192),
data : g_mstring1(100) type c,
g_mstring2(100) type c,
g_mstring3(100) type c,
g_mstring4(100) type c,
g_mstring5(100) type c.
data: g_count1 type ebelp,
g_str_count1(6) type c.
data: g_count type ebelp,
g_str_count(6) type c.
*DATA: f_subrc LIKE sy-subrc,
f_subrc1 LIKE sy-subrc,
f_error(500) TYPE c,
item1(27) TYPE c,
item2(27) TYPE c,
item3(27) TYPE c,
item4(27) TYPE c,
i TYPE ekpo-ebelp.
*DATA: g_billplan_header TYPE c,
g_billplan_item TYPE c.
data : g_external_so type vbak-vbeln. "SO
SELECTION-SCREEN
selection-screen begin of block frame1 with frame title text-001 .
parameters:p_file1 type rlgrap-filename, "OBLIGATORY, "Header data.
p_file2 type rlgrap-filename, "OBLIGATORY, "Item Data.
p_file3 type rlgrap-filename, "Schedule line.
p_file4 type rlgrap-filename ."OBLIGATORY. "Error file.
selection-screen end of block frame1.
start-of-selection.
wa_bapi_header-doc_type = 'Z0MX'. "order type
wa_bapi_header-sales_org = '0130'."sales org
wa_bapi_header-distr_chan = '13'. "distr channel
wa_bapi_header-division = '13'. "division
Old code from copied program
wa_bapi_header-purch_no_s = wa_header-kunnr_2. " Ship to party
New code as required in Finland project
We are using to Header ->Order Tab -> Ship to Party -> Purchase order no (BSTKD_E) to store Old legacy SO number
wa_bapi_header-purch_no_s = 'MX100443'. "External SO i.e Old legacey SO number
wa_bapi_header-ref_1_s = '0000666666'. "Sold to party
wa_bapi_header-ord_reason = wa_header-augru.
wa_bapi_header-purch_no_c = 'ddr1234'. " PO number
wa_bapi_header-purch_date = sy-datum. " PO date
wa_bapi_header-req_date_h = sy-datum. " Required Delivery Date
wa_bapi_header-pmnttrms = '01'. " Payment Terms
wa_bapi_header-incoterms1 = wa_header-inco1.
wa_bapi_header-incoterms2 = wa_header-inco2.
wa_bapi_header-price_date = wa_header-prsdt. " Pricing date
wa_bapi_header-currency = wa_header-waerk. " Document Currency
wa_bapi_header-sales_grp = wa_header-vkgrp. " Sales group
wa_bapi_header-price_list = wa_header-pltyp. " Price list type
wa_bapi_header-cust_group = wa_header-kdgrp. " Cust Group
wa_bapi_header-ship_type = wa_header-vsart. " Shipping Type
wa_bapi_header-purch_no_s = wa_header-bstkd_e. " Ship-to-party po number
wa_bapi_header-collect_no = wa_header-submi. " Collective No.
wa_bapi_header-name = wa_header-bname. " Name
wa_bapi_header-ref_1 = wa_header-ihrez. " Your Reference
wa_bapi_header-cust_grp1 = wa_header-kvgr1. " Industry
wa_bapi_header-cust_grp2 = wa_header-kvgr2. " Customer BU
*ENDFORM. " f_header
IF wa_header-partner_1 IS NOT INITIAL.
wa_bapi_partner-partn_role = 'AG'.
wa_bapi_partner-partn_numb = '0000666666'.
wa_bapi_partner-itm_number = '000000'.
append wa_bapi_partner to it_bapi_partner.
clear wa_bapi_partner.
ENDIF.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = wa_header-partner_2
importing
output = wa_header-partner_2.
IF wa_header-partner_2 IS NOT INITIAL.
wa_bapi_partner-partn_role = 'WE'.
wa_bapi_partner-partn_numb = '0000666666'.
wa_bapi_partner-itm_number = '000000'.
append wa_bapi_partner to it_bapi_partner.
clear wa_bapi_partner.
ENDIF.
perform f_item.
data : order_items_inx type table of bapisditmx with header line.
order_items_inx-material = 'X'. "
order_items_inx-target_qty = 'X'. "
order_items_inx-comp_quant = 'X'. "
order_items_inx-trgqty_den = 'X'.
order_items_inx-rnddlv_qty = 'X'.
order_items_inx-updateflag = 'I'.
order_items_inx-target_qu = 'X'.
order_items_inx-plant = 'X'. "
append order_items_inx.
call function 'BAPI_SALESORDER_CREATEFROMDAT2'
exporting
salesdocumentin = 'MX11111152'
order_header_in = wa_bapi_header
order_header_inx = wa_bapi_headerx
importing
salesdocument = sales_order_no
tables
return = it_bapireturn
order_items_in = it_bapi_item
order_items_inx = order_items_inx
order_partners = it_bapi_partner
order_conditions_in = it_bapi_cond.
if sy-subrc is initial.
commit work.
endif.
*& Form f_item
text
form f_item .
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = wa_item-posnr
importing
output = wa_item-posnr.
wa_item-posnr = '000010'.
IF sy-subrc EQ 0. "IS INITIAL.
move wa_item-posnr to g_str_count."commented out by shakti
ENDIF.
wa_bapi_item-itm_number = wa_item-posnr. " Line item
WA_BAPI_ITEM-PO_ITM_NO = WA_ITEM-EBELP.
wa_bapi_item-division = wa_item-spart.
wa_bapi_item-purch_no_c = 'ddr1234'. " po number
wa_bapi_item-purch_date = sy-datum. " po date
wa_bapi_item-purch_no_s = 'MX11111112'. " Ship-to-party po number
wa_item-matnr = 'MAXIMO_SERVICE'.
call function 'CONVERSION_EXIT_MATN1_INPUT'
exporting
input = wa_item-matnr
importing
output = wa_item-matnr
exceptions
length_error = 1
others = 2.
if sy-subrc is initial.
wa_bapi_item-material = wa_item-matnr. "material
endif.
wa_bapi_item-target_qty = '1'. " Order qty
wa_bapi_item-comp_quant = '1'.
wa_bapi_item-target_qu = 'EA'.
wa_bapi_item-fixed_quan = '1'.
wa_bapi_item-comp_quant = wa_item-kwmeng.
wa_bapi_item-trgqty_den = '1'.
wa_bapi_item-rnddlv_qty = wa_item-kwmeng.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = wa_item-ps_psp_pnr
IMPORTING
output = wa_item-ps_psp_pnr.
IF sy-subrc = 0.
wa_bapi_item-wbs_elem = wa_item-ps_psp_pnr.
ENDIF.
wa_bapi_item-item_categ = 'ZMAX'.
wa_bapi_item-ex_rate_fi = wa_item-kurrf.
wa_bapi_item-dli_profil = wa_item-ffprf. " Dynamic item processor profile
wa_bapi_item-route = wa_item-route. " route
wa_bapi_item-exchg_rate = wa_item-kursk.
wa_bapi_item-plant = '2090'. " Plant
wa_bapi_item-ship_point = 'FN11'. " Shipping point
wa_bapi_item-store_loc = wa_item-lgort. " stg loc
REPLACE ALL OCCURRENCES OF ',' IN wa_item-ntgew WITH '.'.
REPLACE ALL OCCURRENCES OF ',' IN wa_item-brgew WITH '.'.
wa_bapi_item-net_weight = wa_item-ntgew. "
wa_bapi_item-gross_wght = wa_item-brgew. "
call function 'CONVERSION_EXIT_CUNIT_INPUT'
exporting
input = wa_item-gewei
language = sy-langu
importing
output = wa_item-gewei.
EXCEPTIONS
unit_not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
wa_bapi_item-untof_wght = 'KG'. " weight unit
replace all occurrences of ',' in wa_item-kursk with '.'.
replace all occurrences of ',' in wa_item-kurrf with '.'.
wa_bapi_item-profit_ctr = wa_item-prctr. " Profit center
wa_bapi_item-resanalkey = wa_item-abgrs. " RESULT ANALYSIS KEY
wa_bapi_item-cstg_sheet = wa_item-kalsm_k. " COSTING SHEET
append wa_bapi_item to it_bapi_item.
endform. " f_item
Thanks & regards,
Chetansee the following to create sales order:-
*& Report ZSALESORDER
*&DEVELOPED BY JANI KRUPA 4.10.2008
REPORT ZSALESORDER.
Parameters
Sales document type
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text FOR FIELD p_auart.
PARAMETERS: p_auart TYPE auart OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Sales organization
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text1 FOR FIELD p_vkorg.
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Distribution channel
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text2 FOR FIELD p_vtweg.
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Division.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text3 FOR FIELD p_spart.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SKIP 1.
Sold-to
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text4 FOR FIELD p_sold.
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Ship-to
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text5 FOR FIELD p_ship.
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SKIP 1.
Material
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text6 FOR FIELD p_matnr.
PARAMETERS: p_matnr TYPE matnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Quantity.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text7 FOR FIELD p_menge.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Plant
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text9 FOR FIELD p_plant.
PARAMETERS: p_plant TYPE werks_d .
SELECTION-SCREEN END OF LINE.
Complete Deliver
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text10 FOR FIELD p_autlf.
PARAMETERS: p_autlf TYPE autlf DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
Data declarations.
DATA: v_vbeln LIKE vbak-vbeln.
DATA: header LIKE bapisdhead1.
DATA: headerx LIKE bapisdhead1x.
DATA: item LIKE bapisditem OCCURS 0 WITH HEADER LINE.
DATA: itemx LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx TYPE STANDARD TABLE OF bapischdlx
WITH HEADER LINE.
DATA: lt_schedules_in TYPE STANDARD TABLE OF bapischdl
WITH HEADER LINE.
DATA: lt_schedules_ink TYPE STANDARD TABLE OF bapisdhead1
WITH HEADER LINE.
Initialization.
INITIALIZATION.
v_text = 'Order type'.
v_text1 = 'Sales Org'.
v_text2 = 'Distribution channel'.
v_text3 = 'Division'.
v_text4 = 'Sold-to'.
v_text5 = 'Ship-to'.
v_text6 = 'Material'.
v_text7 = 'Quantity'.
v_text9 = 'Plant'.
v_text10 = 'Complete delivery'.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
header-doc_type = p_auart.
headerx-doc_type = 'X'.
Sales organization
header-sales_org = p_vkorg.
headerx-sales_org = 'X'.
Distribution channel
header-distr_chan = p_vtweg.
headerx-distr_chan = 'X'.
Division
header-division = p_spart.
headerx-division = 'X'.
headerx-updateflag = 'I'.
*Complete delivery
header-COMPL_DLV = p_autlf.
header-COMPL_DLV = 'X'.
Partner data
Sold to
partner-partn_role = 'AG'.
partner-partn_numb = p_sold.
APPEND partner.
Ship to
partner-partn_role = 'WE'.
partner-partn_numb = p_ship.
APPEND partner.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant = p_plant.
itemx-plant = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
item category
itemx-ITEM_CATEG = 'X'.
APPEND item.
APPEND itemx.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000020'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant = p_plant.
itemx-plant = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
APPEND item.
APPEND itemx.
Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty = 'X'.
APPEND lt_schedules_inx.
Fill schedule lines
lt_schedules_in-itm_number = '000020'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000020'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty = 'X'.
APPEND lt_schedules_inx.
Call the BAPI to create the sales order.
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
EXPORTING
sales_header_in = header
sales_header_inx = headerx
IMPORTING
salesdocument_ex = v_vbeln
TABLES
return = return
sales_items_in = item
sales_items_inx = itemx
sales_schedules_in = lt_schedules_in
sales_schedules_inx = lt_schedules_inx
sales_partners = partner.
Check the return table.
LOOP AT return WHERE type = 'E' OR type = 'A'.
EXIT.
ENDLOOP.
IF sy-subrc = 0.
WRITE: / 'Error in creating document'.
ELSE.
Commit the work.
COMMIT WORK AND WAIT.
WRITE: / 'Document ', v_vbeln, ' created'.
ENDIF. -
Problem while creating sales order using BAPI
Hi all,
i am creating a sales order from the purchase order data.
when my client will send a PO in EDI format, my 3rd party edi tool will convert that edi formatted PO to text format. then i will upload that text formatted PO to my program then i will create a SO from those uploaded PO data using BAPI BAPI_SALESORDER_CREATEFROMDAT2.
but,no sales order is being created.& also i am not getting any return message.by debugging also, i am not getting the error.plz suggest where i am doing mistake.below is the coding.
DATA:
gfilename LIKE rlgrap-filename.
*--Internal tables
DATA: BEGIN OF i_item OCCURS 50. "Create Material Document Item
INCLUDE STRUCTURE BAPISDITM .
DATA: END OF i_item .
DATA: BEGIN OF i_partner OCCURS 20. "Return parameter
INCLUDE STRUCTURE BAPIPARNR.
DATA: END OF i_partner.
DATA: BEGIN OF i_schedule OCCURS 20. "Return parameter
INCLUDE STRUCTURE BAPISCHDL .
DATA: END OF i_schedule.
DATA: BEGIN OF i_cond OCCURS 20. "Return parameter
INCLUDE STRUCTURE BAPICOND .
DATA: END OF i_cond.
DATA: BEGIN OF i_part OCCURS 0, " Internal table for split data
part(20),
END OF i_part.
DATA: BEGIN OF i_return OCCURS 20. "Return parameter
INCLUDE STRUCTURE bapiret2.
DATA: END OF i_return.
*-- Work areas
DATA: BEGIN OF wa_header . "sales Document Header Data
INCLUDE STRUCTURE BAPISDHD1.
DATA: END OF wa_header .
*DATA: BEGIN OF wa_return . "Output Structure
INCLUDE STRUCTURE BAPIRET2.
*DATA: END OF wa_return .
DATA: begin of sorder.
INCLUDE STRUCTURE BAPIVBELN.
DATA: end of sorder.
data:begin of t_upload,
ebeln(10), "PO no(seagate)
aedat like sy-datum , "PO date
bsart(4) , "PO type
vdatu like sy-datum , "requested delivery date
kunnr(10) , "customer no-sold-to-party
kunak like vbak-kunnr, "bill-to-party
name1_s(20), "name1 of sold-to-party
name2_s(15), "name2 of sold-to-party
land1_s(3), "country
ort01_s(10), "city
regio_s(3), "region(state/province)
pstlz_s(10), "postal code
adrnr_s(10), "address
bstkd_e(10), "end customer purchase order
posex(6), "end customer PO line no(item no)
kdmat(18), "end customer material no(part no)
kunag(10), "ship-to-party
name1_c(20), "name1 of ship-to-party
name2_c(15), "name2 of ship-to-party
land1_c(3), "country
ort01_c(10), "city
regio_c(3), "region(state/province)
pstlz_c(10), "postal code
adrnr_c(10), "address
posnr(6), "item no(seagate PO line no)
pstyv(4), "item category
matnr(18), "material no(seagate 9 digit part no)
zmeng(13), "Target quantity in sales unit
vrkme like vbap-vrkme, "sales unit
meins(3), "UOM
posnr_tot like vbap-posnr,"Total no. of line items
werks(4), "plant
vstel like vbap-vstel, "shipping point
empst(10), "receiving point
shtyp(4), "shipment type
route(6), "route
vsbed(2), "shipping conds
rkfkf like vbap-rkfkf, "method of billing for co/ppc orders
zterm(4), "terms of payment key
inco1(3), "F.O.B inco term1
inco2(3), "F.O.B inco term2
end of t_upload.
Data: wa_upload like t_upload,
i_upload like standard table of t_upload.
Data:v_kunnr like kna1-kunnr,
v_posnr like vbap-posnr,
v_matnr like vbap-matnr,
v_zmeng like vbap-zmeng,
v_kunag like kna1-kunnr.
*---Constants
CONSTANTS: c_comma TYPE c VALUE ',', " For splitting data at commas
c_01(2) TYPE c VALUE '01', " For movement code in Bapi
c_b TYPE c VALUE 'B', " For mvt. Indicator in Bapi
c_creat(5) TYPE c VALUE 'CREAT', " For button text
c_clear(5) TYPE c VALUE 'CLEAR', " For clear button
c_mvmt(4) TYPE c VALUE 'MVMT',
c_ok(2) TYPE c VALUE 'OK',
c_error(5) TYPE c VALUE 'Error'.
*--SELECTION SCREEN DESIGN--
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME.
PARAMETERS:
p_auart LIKE vbak-auart, " order type
p_vkorg LIKE vbak-vkorg, " sales org
p_vtweg LIKE vbak-vtweg, " dist channel
p_spart LIKE vbak-spart, " division
p_vkgrp LIKE vbak-vkgrp, " sales group
p_vkbur LIKE vbak-vkbur, "sales office
p_file(256) default 'c:/saleorder.txt'. "File name
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN PUSHBUTTON 15(10) v_create USER-COMMAND creat.
SELECTION-SCREEN PUSHBUTTON 40(10) v_clear USER-COMMAND clear.
INITIALIZATION -
INITIALIZATION.
v_create = c_creat .
v_clear = c_clear.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM selectfile USING p_file.
*--AT SELECTION_SCREEN--
AT SELECTION-SCREEN .
IF sy-ucomm = c_clear.
PERFORM f_clear.
ELSE.
IF sy-ucomm <> c_mvmt.
**--- Validating the input data.
PERFORM f_check_inputs.
ELSEif sy-ucomm = c_creat.
*--- Validating the input data.
PERFORM f_check_inputs.
*-- Uploading the PO data.
PERFORM f_PO_upload.
*---checking the PO data
PERFORM f_check_upload_data.
*---create sales order from PO data
PERFORM f_Sales_order_create.
ENDIF.
FORM f_PO_upload.
gfilename = p_file.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = gfilename
filetype = 'DAT'
TABLES
data_tab = i_upload
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE i398(00) WITH '(WS_UPLOAD)'
' Errors occured with exception '
sy-subrc.
ENDIF.
ENDFORM. " f_PO_upload
*& Form selectfile
text
-->P_P_FILE text
FORM selectfile CHANGING value(filename) TYPE c.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = gfilename
def_path = 'C:\'
mask = ',*.txt.'
mode = 'O'
title = 'Select File Name'
IMPORTING
filename = filename
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
ENDFORM. " selectfile
FORM f_Sales_order_create.
PERFORM f_fill_header.
PERFORM f_fill_partner.
PERFORM f_fill_item.
PERFORM f_call_BAPI.
ENDFORM. " f_Sales_order_create
*& Form f_fill_header
text
--> p1 text
<-- p2 text
FORM f_fill_header.
move p_auart to wa_header-doc_type.
move p_vkorg to wa_header-sales_org.
move p_vtweg to wa_header-distr_chan.
move p_spart to wa_header-division.
move p_vkgrp to wa_header-sales_grp.
move p_vkbur to wa_header-sales_off.
Read table i_upload into wa_upload index 1.
move wa_upload-ebeln to wa_header-purch_no_c.
move wa_upload-aedat to wa_header-purch_date.
move wa_upload-bsart to wa_header-po_method.
move wa_upload-vdatu to wa_header-req_date_h.
move wa_upload-bstkd_e to wa_header-purch_no_s.
*move wa_upload-route to wa_header-route.
move wa_upload-vsbed to wa_header-ship_cond.
move wa_upload-empst to wa_header-rec_point.
move wa_upload-shtyp to wa_header-ship_type.
move wa_upload-zterm to wa_header-pmnttrms.
move wa_upload-inco1 to wa_header-incoterms1.
move wa_upload-inco2 to wa_header-incoterms2.
ENDFORM. " f_fill_header
*& Form f_fill_partner
text
--> p1 text
<-- p2 text
FORM f_fill_partner.
if not wa_upload-kunnr is initial.
select single kunnr from kna1 into v_kunnr
where kunnr = wa_upload-kunnr.
if sy-subrc <> 0.
Message E014 with 'customer does not exist'.
else.
move 'AG' to i_partner-partn_role.
move wa_upload-kunnr to i_partner-partn_numb.
move wa_upload-land1_s to i_partner-country.
move wa_upload-name1_s to i_partner-name.
move wa_upload-name2_s to i_partner-name_2.
move wa_upload-ort01_s to i_partner-city.
move wa_upload-regio_s to i_partner-region.
move wa_upload-pstlz_s to i_partner-postl_code.
move wa_upload-adrnr_s to i_partner-address.
append i_partner.
endif.
endif.
if not wa_upload-kunag is initial.
select single kunnr from kna1 into v_kunag
where kunnr = wa_upload-kunag.
if sy-subrc <> 0.
Message E015 with 'end customer does not exist'.
else.
move 'WE' to i_partner-partn_role.
move wa_upload-kunag to i_partner-partn_numb.
move wa_upload-land1_c to i_partner-country.
move wa_upload-name1_c to i_partner-name.
move wa_upload-name2_c to i_partner-name_2.
move wa_upload-ort01_c to i_partner-city.
move wa_upload-regio_c to i_partner-region.
move wa_upload-pstlz_c to i_partner-postl_code.
move wa_upload-adrnr_c to i_partner-address.
append i_partner.
endif.
endif.
ENDFORM. " f_fill_partner
*& Form f_fill_item
text
--> p1 text
<-- p2 text
FORM f_fill_item.
loop at i_upload into wa_upload.
if not wa_upload-matnr is initial.
select single maramatnr msegmenge into (v_matnr, v_zmeng) from
mara inner join mseg on maramatnr = msegmatnr
where mara~matnr = wa_upload-matnr.
if sy-subrc <> 0.
Message E016 with 'material no does not exist'.
elseif v_zmeng LT wa_upload-zmeng.
Message E017 with 'order quantity is greater than the quantity present'.
endif.
endif.
move wa_upload-posnr to i_item-itm_number.
move wa_upload-pstyv to i_item-item_categ.
move wa_upload-matnr to i_item-material.
move wa_upload-zmeng to i_item-target_qty.
move wa_upload-meins to i_item-target_qu.
move wa_upload-werks to i_item-plant.
*move wa_upload-meins to wa_vbap-meins.
*move wa_upload-posnr_tot to wa_vbap-posnr_tot.
move wa_upload-posex to i_item-po_itm_no.
move wa_upload-kdmat to i_item-cust_mat22.
move wa_upload-inco1 to i_item-incoterms1.
move wa_upload-inco2 to i_item-incoterms2.
move wa_upload-zterm to i_item-pmnttrms.
move wa_upload-empst to i_item-rec_point.
move wa_upload-shtyp to i_item-ship_type.
move wa_upload-route to i_item-route.
append i_item.
PERFORM f_fill_schedule_line.
PERFORM f_fill_conditions.
ENDLOOP.
ENDFORM. " f_fill_item
*& Form f_fill_schedule_line
text
--> p1 text
<-- p2 text
FORM f_fill_schedule_line.
move wa_upload-matnr to i_schedule-itm_number.
move sy-datum to i_schedule-req_date.
move wa_upload-zmeng to i_schedule-req_qty.
append i_schedule.
ENDFORM. " f_fill_schedule_line
*& Form f_fill_conditions
text
--> p1 text
<-- p2 text
FORM f_fill_conditions.
move wa_upload-matnr to i_cond-itm_number.
move sy-datum to i_cond-conpricdat.
append i_cond.
ENDFORM. " f_fill_conditions
*& Form f_clear
text
--> p1 text
<-- p2 text
FORM f_clear.
clear:p_auart,
p_vkorg,
p_vtweg,
p_spart,
p_vkgrp,
p_vkbur.
ENDFORM. " f_clear
*& Form f_call_BAPI
text
--> p1 text
<-- p2 text
FORM f_call_BAPI.
clear:i_item,i_partner,i_schedule.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
SALESDOCUMENTIN =
ORDER_HEADER_IN = wa_header
ORDER_HEADER_INX =
SENDER =
BINARY_RELATIONSHIPTYPE =
INT_NUMBER_ASSIGNMENT =
BEHAVE_WHEN_ERROR =
LOGIC_SWITCH =
TESTRUN =
CONVERT = ' '
IMPORTING
SALESDOCUMENT = sorder
TABLES
RETURN =
ORDER_ITEMS_IN = i_item
ORDER_ITEMS_INX =
ORDER_PARTNERS = i_partner
ORDER_SCHEDULES_IN = i_schedule
ORDER_SCHEDULES_INX =
ORDER_CONDITIONS_IN = i_cond.
ORDER_CFGS_REF =
ORDER_CFGS_INST =
ORDER_CFGS_PART_OF =
ORDER_CFGS_VALUE =
ORDER_CFGS_BLOB =
ORDER_CFGS_VK =
ORDER_CFGS_REFINST =
ORDER_CCARD =
ORDER_TEXT =
ORDER_KEYS =
EXTENSIONIN =
PARTNERADDRESSES =
if not ( sorder-vbeln is initial ).
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
write: /'Order number:', sorder.
else.
loop at i_return.
write: / i_return-id, i_return-number, i_return-message(80).
endloop.
*write: /'Error'.
endif.
*loop at i_return.
*write: / i_return-id, i_return-number, i_return-message(80).
*endloop.
ENDFORM. " f_call_BAPIHI
Pricing will be carried basing on the pricing
procedure.
Case1: Prices will be carried out automatically if
necessary condition records are maintained for the
condition type.
For this you can go to Sales Order-> Item Conditions
In the screen you can click on command button Analysis,
which gives you the list of condition types associated
to the pricing procedure. By clicking on the condition
type you can know the action that has taken place.
Case2: Manually forcing prices for Items.
To do this, you have to populate ORDER_CONDITIONS_IN &
ORDER_CONDITIONS_INX. Also note to identify the item
numbers, you manually pass the item number for each item
in the sales order, use the same item number for
populating conditions.
Parameters required:
ORDER_CONDITIONS_IN:
ITM_NUMBER, COND_TYPE, COND_VALUE, CURRENCY
ORDER_CONDITIONS_INX:
ITM_NUMBER, COND_TYPE, UPDATEFLAG, COND_VALUE,CURRENCY.
Hope the above info helps you. Do revert back if you
need more info.
Kind Regards
Eswar -
Updating price in already created sales order
Hi all,
I have an issue. When we create sales order, system will display current date pricing on sales order, for example total value of sales order is 9000. Now before delivery, prices change and we have to manually update price on sales order individually. Is there any report available that can update price of all already created sales orders instead of going on sales order and update one by one.
Please respond.
Best Regards,
AI.Hello,
You can update the pricing for all the created orders at a time in VA05 .
Goto Transaction code VA05 and give all the sales orders and then in the MENU click on
EDIT->MASS CHANGE>NEW PRICING
And update the New pricing, then will carry out new pricing for all the sales orders at a time.
OR,
There is also one function module SD_BULK_CHANGE , Create your own Query in SQV1 and make changes.
Hope it will resolve , Please revert if you need further details
thanks,
santosh -
Hello,
I am getting this Error message"error determining posting period(infostructure S008,Variant Z2,RC3)" while creating Sales order from Inbound Idocs in the IDOC,which is affecting sales order creation.
While viewing this Info structure S008, I could see no records have been maintained. Wanted to know the reasons behind this Hard error?
Is it something related to Date Field used in the Update Rules for this Infostructure which is causing this posting period error?
Appreciate your inputs on this.
Thanks and Regards
Mohammed RoshanThank you Jelena,I checked the Ship. Delivery dates in the IDOC which are for Current Fiscal Year- 20140703 and 20140711,Could there be any other reason for this error?
Could it be an issue with e Update rule in this Infostructire S008
Secondly when we try change the update rule thru MC25 for this Infostructure S008,It gives a message"
"Maintenance of SAP standard updates not allowed"
Kindly advice
Thanks and Regards
Mohammed Roshan
Maybe you are looking for
-
Hello everyone! Can anybody tell about new features in SAP GUI for Java. I think It's emasculate now. It doesn't contain New ABAP editor, Network graphic, normal Screen Painter... I really enjoy adding themes and other stuff, but when these functiona
-
i dont want to update to yosemite. i have version 10.8.5 snow lion and i like it. have read a lot about yosemite that i didnt want to mess with, such as i tunes 12, i already hated what they did to i tunes when we lost cover flow. even though i ha
-
Message. Can't create a new account: Do Not Localize
I try to create a new account. Select "Other message account..." Each attempt ends with the message << Do Not Localize >>. And that's it. My accounts preferences dialogue. Right side is empty 3. Can't fill the fields. After pressing "Set Up" button,
-
Portal Content Translation - Unable to see the changed iView name, desc etc
Hi Experts, I am using Portal Content Translation to translate the name of iViews, roles, iview description etc from English to Spanish. I have followed the method mentioned in the below mentioned link: http://help.sap.com/saphelp_nw04/helpdata/en/74
-
Troubles with update mechanism in Photoshop CS6 installing Camera Raw 7.3 update
Greetings, Attempted an update using the update mechanism from Bridge. CS6 Design Premium on Mac. Received a couple error messages when it completed. Foolishly I did not write down the details. I thought I could just run the update again. When I