Creating SAP BW Report iview in Portal to access BW System

Hello Everybody ,
Iam creating an iview for publishin BW Reports in Enterprise Portal with the iview name SAP BW Report iview ,it asks for BEx Web Application Query String and Application Parameters and we are stuck over that.Do we need to create some standard templates for it and then connect them to reports .What should we enter under these parameters.Kindly revert back.
When we launch the SAPBWWebAppDesigner for template designing,an error message is displayed as mentioned below.Kindly please check that and the reason for its display.Do we need to make certain configurations for the Webapplication server for BW ,if any one has a document /guide available for that,kindly please revert back.
Error:
"You are logged on to an application server that does not support HTTP.Some of the Web Application Designer functions are therefore not available.Do you want to logon to a different application server?"
We are also not able to connect to the Web Application Server of BW directly by putting the url of the WAS into our browser.Are any extra configurations needed for that on the BW side for WEBAS.
You can send me attachents on my Email id which is [email protected] back soon,
Thanks,
Somya

Hello,
I was asking abt the following parameters to be entered in BW for Portal inorder to create RFC ,Rfc for BW in Portal is already created.
                                                     Program ID
PortalDirectory
RFCDestination                                                                                URL Prefix for Portal
Prefix of RM for BWMetadata
Export Path
Export File Name
Path in Portal
Name in Portal Content
System Alias
Logon Ticket Client
Portal SID
Import Path
Import File Name

Similar Messages

Unable to change language for SAP BW Report Iview

Dear all
We are currently rolling out BW Web Templates can be displayed in both EN and MS languages. The language can be changed via the URL that we display, e.g.
For English Language:
http://<hostname>:<port>/sap/bw/BEx?SAP-LANGUAGE=EN&cmd=ldoc&template_id=ZTEST
For Malay Language :
http://<hostname>:<port>/sap/bw/BEx?SAP-LANGUAGE=7&cmd=ldoc&template_id=ZTEST
We have published these templates into Ent. Portal 6 using SAP BW Report Iview, but unfortunately we cannot view the report in the Malay language (SAP-LANGUAGE=7), even though we have inserted the command SAP-LANGUAGE=7 in the SAP BW Report Iview query string. All the reports, although defaulted to SAP-LANGUAGE=7 displays in English. We also tried to set the language settings for the Iview, but there are no language 7 or MS in the Iview. It can only be defaulted to the Portals language, which is English.
Note that the reports can be viewed in the different languages if we using the URL separately outside of Portal, and also within BW Bex Analyzer itself. Only the Portal doesnt allow us to view the reports in MS language.
Can someone help us on this matter? All helps really appreciated. Thanks a lot.

Hi Chris,
That's a bit odd indeed. If I understand your question correctly, you do get the BW reports in the correct language (either English or Malay) using the url's in your post but not when using them within a standard BW report iView?
The language setting for the iView has, unfortunately, nothing to do with the language for the content itself but can you tell me what the requested URL is for both Reports?
The BW Report iView is based on the Application Integration Component that generates the URL based on the paramaters you provide in the BW report iView.The following template is being used: <iView[PORTAl_URL]>?System=<System[url_Encode]>&Report=<Report>&DynamicParameter=<DynamicParameter[url_Encode]>. I could be that the generation of the URL fails due to the 7 (don't know why, just a gut feeling because it's the only thing that's different between those urls). You could try to use create an iView based on the Application Integrator instead (some more control over the URL template) but first you need to check whether the URL generated by the iView is correct.
Cheers!
Frodo
P.S: Award points if you find this useful

Difference: SAP BW Report iview - Query iView - URL iView

Hi,
I want to show BW reports on the portal. Can anybody suggest me the different ways of doing it ? And also let me know about checklist of steps that need to be performed.
Can anybody tell me the difference between showing BW reports through URL iviews, showing reports through Query iView and showing reports through SAP BW Report iView ?
Which one can i use for showing BW reports taking into consideration the implementation of SSO between the two? I tried the URL iView (using the Web URL of reports generated by BW) but it asks for Username/password. Is that the problem with SSO. How can i check if SSO parameters have been set or not. I have imported the verify.der to BW System and added that to ACL. Is there anything else which is required?
Thanks in advance.
Rgds,
MA

Hi Manoj,
I feel BW report iview will solve your problem. You can create a query sting in BW query designer and give the same in BW query string text area while creating BW report iview.
In the case of an url iview you are just giving a URL link of the BW report (this will ask for username/password).
But, in the case of a BW report iview you can view the required query as an iview (user mapping can be successfully done in this case) You should give fully qualified domain name in Was server option while creating the system.
While using the logon ticket Login id of both the system (ie BW and Portal) should be the same.
Refer the link for SSO using logon ticket)
User Mapping-based Single Sign On
Regards,
Vinod

Issue with SAP BW Report Iview

Hi,
The issue stands with the context menu(right click menu)
I have created a BI Query and generated a BW Report with the Web Designer Wizard.
When I run the generated URL it is working fine, with the context menu also working perfectly.
However when I use that report in SAP BW Report Iview, the report gets opened perfectly but the context menu is taking me to a new page with those options.
As of now i do not know of any setting for context menu specially.
If anyone can help me or if anyone has encountered this error before, pl. let me know the solution.

Atul -- i am running into simillar issue. Please let me know if you found a solution for this.
Hi all -
When i create a BW Report iView 7.x in EP 6.0, the second level context menu doesn't appear for the template. Please let me know if this can be fixed.
Thanks
PR

SAP BW Report iView problem

Hi,
Im trying to create a SAP BW Report iView with a BEx URL, but Im getting an error:
Session Management will not work! Please check the DSM log file for details.
When I use the wizard (for SAP BW Report iView), it asks me to fill out the web application string. Here I pasted in the URL. I left the application parameters blank.
The BEx URL:
http://<hostname>/sap/bw/BEx?sap-language=DA&bsplanguage=DA&CMD=LDOC&TEMPLATE_ID=WEB_TRAFIK_STARTSIDE
The BW call works fine in the browser and with a URL iView!?
EP 6.0 / WAS 6.40 / BW 3.5
Thanks
Joachim

you should be using BW Report iView.
and when you create BW Report iView pass the following for the querystring parameter
CMD=LDOC&TEMPLATE_ID=WEB_TRAFIK_STARTSIDE
for this to work, in the system definition WAS host , was path and was protocol should be maintained
Regards
Raja

Problem while creating SAP Web Dynpro iView

Hi,
I am creating SAP Web Dynpro iView from iView Template.
The SAP Web Dynpro System Object is being created. The System Alias is also being created.
The Test Connection is successful with Portal Server.
Now, while creating SAP Web Dynpro iView from Template in Step 4:
I am not getting my System while an old system which is being deleted is being displayed.
Name of my System Object is: WD_System and System alias is: WD_Alias.
The Step name is:
Step 4: Application Parameter
Enter the paramater(s) of the application for which you want to create the iView
Regards
Kaushik Banerjee

Hi Bala,
I am not getting the System Alias under:
User Administration-> User Mapping-> Logon Data(Select a Principal) (System Alias).
The System is successfully built under System Amininstration->System Configuration->System Landscape->Portal Content->kaushikb named WD_System and System Alias is named as: WebDynpro_alias.
The Test Connection is successful.
I am displaying the result below:
SAP Web AS Connection
Test Details:
The test performs the following:
1. Checks the validity of the system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Checks if a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the server to see if it is alive.
7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (kolapon:50000)
5. The host name kolapon was resolved successfully.
6. The server kolapon was pinged successfully.
7. The WAS ping service http://kolapon:50000/sap/bc/ping was not pinged successfully. If the ping service is not activated on the WAS, you can try to call the ping service manually.
8. An HTTP/S connection to http://kolapon:50000 was obtained successfully.
Regards
Kaushik Banerjee

Erro while execution of bw report iview on portal

Hi all,
When i am trying to preview the bw report iview on portal 6.0 i am getting following error
Portal Runtime Error
An exception occurred while processing a request for :
iView : com.sap.portal.appintegrator.sap.BWReport
Component Name : com.sap.portal.appintegrator.sap.BWReport
Error occurs during the rendering of jsp component.
Exception id: 03:15_06/06/06_0005_3859550
See the details for the exception ID in the log file
waiting for the help.
Thanking
Rajendra

this problem is solved
in the bw system properties instead of ip address of bw server server name was given and the problem is solved.
Rajendra

How to add in a SAP BW report iview in SAP EP 7.0

Hi,
can anyone help me about the SAP BW report iview in EP 7.0,because there is only Bex Web Application iview.I can not find the type of SAP BW Report Iview

Hi,
Check out this links.
http://help.sap.com/saphelp_nw04/helpdata/en/f6/3d1640d4642402e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f6/3d1640d4642402e10000000a1550b0/frameset.htm
Thanks
Senthil
P.S: Reward Points for useful answers.

How to Create a hyper link iview in portal

Hi Guys,
Can any one help us to create hyper link url iviews ( I want to open a iview when click on the link of another iview )
Thanks in advance

Hi,
Its very easy.
Step1) Go to content admin -> pcd content -> Create a folder in pcd content.
In that folder create an iview. you will get so many iview templates -> select your desired template iview.
(If you still confused, search in the sdn for creating an iview in pcd content).
After creating that iview, open the same iview as object. check the quick link property. intially it will be blank. set the quick link property as iview1(as an example).
Step2) go to content admin->km content and to go to ur desired folder, say documents.
Create a folder abc and inthat create an external link iview1. give the url as /irj/portal/iview1.
Step3) create a KM Navigational iview(iview2) and open as object. set the property 'path to document' as /documents/abc.
Preview that iview2 . you will get an hyper link iview1. on clickink that iview1 details will display.
Search in the SDN for creating KM navigational iview or any other iview.
Hope that helps.
Raghu

How to create a document/report on all objects in the BW system?

Hi,
The requirement in our company is to create a document/report with the list of all the objects that exist in the BW system for various applications. This list should contain the technical details of the different objects and where an object is used, what's the source for the object etc. The information should be similar to that in the Metadata repository but it should be one single document/report which includes all the objects.
I tried using the 0TCTBWOBJCT info object (content browser) but it was not of great help.
Can anyone help me out in this task?
Thanks,
Anu

Hi,
Try to use tables RSOSFIELDMAP, RSDSSEGFD and RSTRAN
Hope it helps
bhaskar

BI report iView in Portal

Hi,
I am trying to create a iView to access the BI report through Portal.
We have done SSO and other configuration.
While previewing the iView I am getting the following error.
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Could not find portal application com.sap.ip.bi.service.generic.
Exception id: 08:17_28/07/08_0024_4848350
See the details for the exception ID in the log file
Any idea ???
How to check log files ??
Regards,
Niraj

check the defaulttrace for errors and post the here...
Please only post the errors and not the full log
Regards
Juan

Problem in SAP BW Report iview

Hi All,
I have created a BW iview. When i am clicking on iview it is asking for user id and password again.
I have created BW system and have specified all the properties and have done the user mapping.
Is there any configuration which i need to do from BW side.
Please let me know if i am missing anything.This is very urgent.
Regards,
Vaishali

Hi All,
Thanks for all ur answers.
Durairaj: Web As connection is successful. but i am not logging in to the portal using FQDN.
Guru: both the application servers are different. I trying to use SAP logon tickets for SSO. Hope that will work.
Vinod: I tried using Com.sap...appintegrator.sap and it is working. But in the web application query string after giving full url only it is not asking for user authentication again.Do we need to give the full url in the web application query string???
Regards,
Vaishali

SAP BW report through CRM portal

Hi,
I have a requirement where we need to open SAP BW query/web template through CRM7.0 portal. Could you please tell me all the necessary configuration steps that we need to do in CRM system for carrying out this task?
Thanks,
Rahul

Hello Rahul,
i guess you mean CRM Webclient UI - or do you mean SAP Portal?
In CRM70 webclient UI go to SPRO.
CRM->UI Framework->UI Framework Definition->Display SAP Netweaver BI Reports in SAP CRM.
Here you will find the complete documentation what you need to do.
A prerequisite is to define the RFC-Destinations in SM59 between CRM and BI.
Kind regards
Manfred

How to create pdf from reports iView in VC?

Hello,
I have created a certain iView which presents a few BI reports in VC.
Is it possible to add to it a button or a link that by pressing on it will generate a pdf file with these reports so the client can download?

Hi,
It can paste data into a microsoft word document. But the chart is not pasted. instead data in all components in the particular iview (including table data and chart data) is coiped into clipboard.
Only, the category axis, value axis and data series fields are copied and can be pasted into excel. May be you can use an excel macro to make the chart with the data.
Try another method
For the button, give system action "print" with parameter "print screen".
The whole screen is printed to printer including chart(correctly displayed). You can redirect the print to a file. But i have no idea, what is the format of the print. may be you can try some picture viewers or do a google search for that
Regards,
Sooraj

Creating Sap Crystal Report Through Oracle Stored Procedure Packages

Hi,
1.How we can create crystal report through oracle stored
procedure packages pls tell me the steps through adding command then
tell me the syntax what should i write in command to call the stored
procedure packages or if have some other option then also tell.
2.can
we link stored procedure column to other table column that used in
report.

Hi Ganesh,
As this error comes when you are trying to insert non-numeric value into a numeric column in db it seems that your field might be numeric and you are trying to send it as a string in database.
Please check your Store Proc carefully..
Reference Thread: Oracle/PLSQL: ORA-01722
--Dhana

Creating SAP BW Report iview in Portal to access BW System

Similar Messages

Maybe you are looking for