Creating SC's from external system

Hi there,
Does anyone have experience creating shopping carts into SRM from a different application (via an interface). I know about the existence of BAPI BAPI_SCEC_CREATE but would like to know if anyone has experience and maybe already some hints/tips/code available that I could use.
Would be very much appreciated.
Regards,
Machiel.

Hi,
You can use standard BAPIs like BBP_EXTREQ_INBOUND or BBP_PD_SC_CREATE_EXTERNAL to create shopping carts based on your custom requirement.
Regards,
Sanjeev

Similar Messages

  • Create Support Message from external system

    HI experts,
    I would like to change the Create Support Message screen(Menu->Help->Create Support Message) and add three fields namely: Category, Subject and Solution Number because currently these fields are not populated in the Service desk if I create message in this way unlike in using NOTIF_CREATE tcode where there are selection fields for these.
    Also, I'm creating the support message from an external SAP system and the messsage is sent to the Solution Manager system. The NOTIF_CREATE tcode does not exist in the external system as well as the whole package DSWP.
    Please let me know you rthoughts on this.
    Thanks
    Eric

    Hi guys,
    Thanks for your answers... But is it possible to call transaction NOTIF_CREATE from an external system?
    I have done something already so that those 3 fields will be automatically populated for a message sent from an external system.
    I changed the screen and called FM BAPI_NOTIFICATION_CREATE(a remote enabled FM which is the one being used by transaction NOTIF_CREATE to create a message) inside FM BCOS_SEND_MSG.
    I populated the category, subject and solution in the FM export parameters as well as the solution number in the sap data table. I put a destination also..
    This FM calls another FM DNO_OW_CREATE_NOTIFICATION which is the one being used from the external system but do not cater the functionality to send the 3 fields that we need.
    As you will notice, there are lots of standard objects that I've changed. =)
    My problem now is that the system data sent is the same with the system data if you create the message using NOTIF_CREATE. Some system that were sent when a message is sent from an external system is missing but at least the sap system and client ID is sent. There is no external reference number also. But hopefullly, the users will accept it. Can't find any other solution to this.
    Thanks,
    Eric

  • Create activity from external system

    Hi
    What is meant by creating activity from external system.
    I need to work on an enhancement which deals with function module to create activity that can be called from external systems e.g. on demand.
    I am not sure what does that exactly mean?
    Any pointers would be helpful.
    Thanks
    Alka

    Hi guys,
    Thanks for your answers... But is it possible to call transaction NOTIF_CREATE from an external system?
    I have done something already so that those 3 fields will be automatically populated for a message sent from an external system.
    I changed the screen and called FM BAPI_NOTIFICATION_CREATE(a remote enabled FM which is the one being used by transaction NOTIF_CREATE to create a message) inside FM BCOS_SEND_MSG.
    I populated the category, subject and solution in the FM export parameters as well as the solution number in the sap data table. I put a destination also..
    This FM calls another FM DNO_OW_CREATE_NOTIFICATION which is the one being used from the external system but do not cater the functionality to send the 3 fields that we need.
    As you will notice, there are lots of standard objects that I've changed. =)
    My problem now is that the system data sent is the same with the system data if you create the message using NOTIF_CREATE. Some system that were sent when a message is sent from an external system is missing but at least the sap system and client ID is sent. There is no external reference number also. But hopefullly, the users will accept it. Can't find any other solution to this.
    Thanks,
    Eric

  • Not able to create a message from satellite system

    Hello Everyone.
    We have been working on Solution Manager .We have managed with successfull installation,Uploaded required support packages,configured the system according to SAP Solution Manager Guide.
    Faced with some problem regarding support desk,we are not able to create a message from satellite system to Solution Manager.
    Note : Error Message related to this problem is ....
    <b>"Error in Local Message System : External number assignment, Enter notification num message was not Created."</b>
    Thanks in advance.
    Regards,
    Nimesh V . Master

    Hi, you need to check the number ranges for the notifications and make sure they are correct.  Look in the IMG of the SAP Solution Manager system for the instructions.  You also need to make sure that the Service Desk BC Sets are activated if you are NOT on 4.0 and SP Stack 09+.  In the later SPs much of this configuration from the IMG is automated in the wizard.

  • How to call RFC from external System to get HR Data

    According to the requirement the "HR" Workflow has to be able to view the employee details from external system Using the standard Microsoft connectors.
    So, my job is to create an RFC where i need to fetch the HR data from the infotypes P0001 and P0002. And they will call this RFC by requesting employees surname, ID number and/or Employee number.
    Do i need to simply write OPEN SQL statements in RFC or
    do i need to call any BAPI's?
    Setting up RFC's(Creation of Destinations) is not our job.
    Someone Please help me in this regard with some valuable input. Thanks in Advance.
    Ram.

    Hi Ram,
    to get the information from HR sytem you could call the BAPI
    BAPI_EMPLOYEE_GETDATA
    Regards
    Bernd

  • Creating Complaints/Returns from external reference for Billing Documents.

    Hi Experts,
    I have question regarding Creating Complaints/Returns from external reference.
    My requirement is to fetch data for Billing Type, Billing Documents and other related from ECC system and to create Complaints/Returns using the same in Web UI.
    Is there any SPRO configuration as such so that we can pinpoint to the ECC system where it should fetch the data or is there be a custom development involved for the Drop down lists in Web UI?
    I know about the BADI CRM_COPY_BADI_EXTERN which is triggered when creating using reference, but I am not able to see where the method SEARCH_HELP_FOR_EXTERN_DOC or GET_SEARCH_HELP are triggered.
    I have gone through many forums within SDN but not able to find any solution. Please help!
    Regards,
    Mahesh

    Hi Ly,
    I wouldn't be able to share the code with you, but I would ask you to check with the functional counterpart regarding the important fields that are to be copied.
    What I did in my case is, based on the Billing document number passed from CRM in the RFC I hit the tables VBRK and VBRP for header and item data respectively.
    For pricing I passed the relevant fields from KONV table (KSCHL, KWERT, KAWRT etc..)
    For document flow VBFA.
    For partner VBPA.
    I faced issues only with pricing as there were many settings and pricing routine logic differences between CRM and ERP.
    Regards,
    Mahesh

  • Updating purchasing contracts in SRM from external system ( XI )

    Hello friends,
    We have a requirement to update / create purchasing contracts in SRM from external system ie e-sorcing . We are getting the structure of contract from
    xi proxy.
    We are using function modules
    BBP_PD_CTR_CREATE
    BBP_PD_CTR_UPDATE
    to create / update contracts.
    The issue is , how we will come to know an existing contract is got updated in
    the external system and , is there any function module/ bapi available to get those
    updated contract records or is there any way to do this.
    It would be great if anybody can provide some helpful information.
    Thanks..
    Jayaram

    Hello BABA,
    Try this link. Hope this helps.
    [Re: Creating SRM PO with Smartforms BBP_PO;
    Please discuss this issues in SRM- General forum for better replies.
    Cheers,
    Suvendu

  • BCS - Message from External System : 'Login failed for user 'NT AUTHORITY\IUSR'.'.

    Hello,
     I have create a an external content type .
     I Choose "Connect with user's Identity".
     I create a external list that uses the ExternalContentType.
     When I try open the external list from browser by User "TestUser" . I get the following error "Message from External System : 'Login failed for user 'NT AUTHORITY\IUSR'.'"
       My Question :
           I need to know why pass the credential "NT AUTHORITY\IUSR" to connect to the data base not the
            current log in"TestUser" ?  How Can I solve it ?
            Thanks
             Hema
    ASk

    Hi,
    did you configure Kerberos delegation?
    NTLM fails when you try to open external list from client computer, because SharePoint cannot pass user's identity - "Double Hop" issue.
    Take a look at confguring Kerberos for SharePoint 2010 white paper
    Download Configuring Kerberos Authentication for Microsoft SharePoint 2010 Products from Official Microsoft Download Center
    http://www.microsoft.com/en-us/download/details.aspx?id=23176
    Robi MCT Kompas Xnet d.o.o. Ljubljana | blog: http://xblogs.kompas-xnet.si | website: http://www.kompas-xnet.si
    Slovenia
    Please vote if you find reply useful or mark it as answer.
    Thank you

  • Modify PO from external system

    Hi all,
    We are implementing SRM 5.0 with extended classi scenario.
    Until now we have a R3 system where we create PO, but we also have got a functionality for modifing particular information of PO in a lagacy system, that comunicate with R3 between idoc.
    Now we migrate the lifecycle of PO in SRM, but the legacy system remains.
    Wich is the best way for modify a PO from a legacy system in SRM?
    thanks
    enzo

    Hi,
    You can try multiple methods ( mostly non-standard), one is use the SRM function modules to update PO, when you send the data from external system, other method is PO response( send the changes from external system as PO response in SRM).
    Hope above methods will resolve your issue.
    Thank you
    Sreedhar Vetcha

  • Roles required to create support message from satellite system

    Hi Team,
    I am trying to create support message from satellite system. i have assigned S_RFC and S_RFCACL to the Zrole. Apart from that, is there any other roles to be assined in satelite system to create support message?
    Regards
    Kumar

    I think that's it.
    Of course they roles in the central system too: SAP_SV_FDB_NOTIF_BC_ADMIN and SAP_SUPPDESK_CREATE (or copies thereof).
    Regards,
    Sean

  • Creating Support Messages from Satellite System without SolMan user account

    Hi
    We are having some problems with users "creating support message" from our ECC system  to SolMan, if the user does not have a user account in Solution Manager.
    It is not correct, that users from Satellite systems can create support messages from these systems, without the user having an account in Solution Manager? And that the user is identified by the business partner for the user, that must exist in the Solution Manager system ?
    We have set up the RFC for the supportmessages between SolMan and the ECC system as trusted RFC, with the "Current user" as the user, but how should this be set up, if the user does not have an account in the Solution Manager system. If we enter a user with the right authorizations in the RFC, will the messages that come through not just appear as created by that user, instead of the ECC user and corresponding business partner ?
    Regards
    Lars

    Hi,
    you can use the use the user for the RFC-Connection in that case. I have customizied a similar scenario. In my scenario the System from which the message was created, is the business partner (SOLD-TO-PARTY). For that you have to create a communication user (i.e SOLMAN<SYSID>). In TA SM59 in the satellite-system you assign this user for the connection. (Don't forget to assign the user to the role "SAP_SV_FDB_NOTIF_BC_ADMIN"). Now, it schould be possible to create messages from the satellite system to the solution manager. Additionally you should create business-partner for each user of the satellite system, by using TA DSWP>EDIT>CREATE BUSINESS PARTNER.
    With this TA, it is easy to create BP for each satellite system.
    Best regards
    Marc

  • 'Accept IDOC' from external system

    Hi Experts,  I am new to IDOCS. I have to update one already written function module to accept IDOC in SAP from external system. In the function module I see some IMPORT parameters like 'input_method' and 'mass_processing' and EXPORT parameters like 'workflow_result' , 'application_variable' , 'in_update_task', 'call_transaction_done' . Can someone tell me what are these parameters for ???.

    input _method for method of data records update
    Mass_processing for handling the large number of Idocs in single take
    Workflow_result for hitting the results at last
    'in_update_task' update the records in update mode
    call_transaction_done' by using call transaction method it would post the records

  • IDOC from external system

    Hi,
    I have scenarion in that we will receive IDOC from external system (SAP system) in XI i.e. IDOC- XI -IDOC scenrio. from my Understanding ,to configure the scenario I have to do ALE from sender side and IDOC receiver channel in receiving side.
    External system (SAP) -(ALE)-> XI -(IDOC rcv)--> Our System (SAP)
    Please can anyone provide me steps to do ALE from external system.
    Edited by: tapan singh on Feb 28, 2011 11:51 AM
    Edited by: tapan singh on Feb 28, 2011 11:52 AM

    Hi,
    We can have alternate ways to send IDocs from external system to SAP system. One way is in below link
    http://help.sap.com/saphelp_46b/helpdata/en/52/16abf6543311d1891c0000e8322f96/content.htm.
    http://help.sap.com/saphelp_40b/helpdata/ru/52/16abcf543311d1891c0000e8322f96/content.htm
    I can think of few more, like In external system after generating Idoc, save it as a tex and send it to SAP system using Http post or using web service.
    Look out to below discussion.
    Send IDoc from External System to SAP system
    Regards
    Aashish Sinha
    Edited by: Aashish Sinha on Feb 28, 2011 1:16 PM

  • Send IDoc from External System to SAP system

    Hi Folks,
        I have a requirement to send IDocs from an external system to the SAp system. Basically the external system is a subsystem which is able to send & receive idocs. The external system is currently able to send idocs to SAP system through the ALE layer but now we have to replace it by PI. Now the external system has to send teh IDocs to the SAP ECC system through the SAP PI 7.0.
       Kindly let me knowq how I can achieve it.
    Regards,
      Santosh

    Hi Satish,
    You can achieve this requirement
    1)If your external system going to support web service cals then send IDoc from External system as a web service, in PI use sender side SOAP and receiver side IDoc receiver channel  to  send IDoc.
    or
    2)Use proxy program ,implement the same ALE logic in PI.
      or
    3)Copy the Extenal IDoc message in to file folder as XML,then use file adapter to pick up this message and send it SAP using IDoc.
    Regards,
    raj

  • Creating Target Group from External File

    Hello Experts
    We need to create target group from external file. (That is to say we will have let's say txt file containing BP that belongs to specific target group and we need to assign these BPs to to specific target group in SAP CRM)
    I have searched for it on sdn and found something benefical. I have found BAPI_TARGETGROUP_CREATE, I have checked it but I don't understand how should we use it becuase as far as we understand it just creates target group, we cannot see anything related with Business Partner. How can we relate BPs with the target group we create by this BAPI.
    What should we do, is anyone have previous experience about it? or is there a way to do it without using BAPI.
    thanks it advance
    M.
    Edited by: Mehmet Ergul on Jan 22, 2009 11:19 AM

    Hi,
    You can do this from within the standard Web UI. It's straight out of the box.
    Create a profile set and in there create a target group in the target group assignment block just by entering the description of the target group. Then enter edit mode of this target group and click the button "Import Members". Remeber to mark "Change selected target group" unless you want to create a new target group.
    /Anders

Maybe you are looking for