Creating scrolling image banners

Hi All,
Can anyone point me in the right direction on haw to create a banner that enables me to scroll images like a slideshow that is executed when the browser opens the site..
Thanks very much for your help.

You could try BannerZest...
There's also SWF 'N SLIDE...
And this old thread may help...

Similar Messages

Issues creating scrolling images for photo gallery

Hi all,
I'm attempting to create a thing where my thumbnails will scroll across the bottom of the page, like when you put the mouse on the right it scrolls right and visa versa. I found a great tuturial only to realize halfway in that it was done with Flash 8, therefore apparently quite a few things have changed. And this is my first stab at Flash!
The first place i noticed is when my motion tween didn't work, so I instead created a 'Classic Tween' finding it had the same affect as 'Motion Tween' in Flash 8, however as I progressed in the tut, I don't think the results were the same.
My images scroll but after creating a _xmouse<40){........prevFrame, there only continue to scroll, the prevFrame command doesn't work!
So to my question...does anyone know of a good tut for this type of thing for CS5? OR, is anyone really familiar with both Flash 8 and CS5 and could help me pinpoint the differences for what I'm attempting to create?
Thank you SO MUCH, any help is really appreciated!
Giuseppe

So I figured it out after googling for a while and guess and testing...
MovieClip(root).addEventListener(Event.ENTER_FRAME, enterFrameHandler);
function enterFrameHandler(event:Event):void
if (MovieClip(root).mouseX > 600 && mouseX < 800 && mouseY > 450)
imgBar.nextFrame();
if (MovieClip(root).mouseX > 800 && mouseY > 450)
        imgBar.nextFrame();
imgBar.nextFrame();
    if (MovieClip(root).mouseX < 300 && mouseX >100 && mouseY > 450)
imgBar.prevFrame();
    if (MovieClip(root).mouseX < 100 && mouseY > 450)
        imgBar.prevFrame();
imgBar.prevFrame();

Create an image scroller with swipe&drag in Edge Animate

Hi folks!
I'm trying to create a image scroller like this one http://www.awwwards.com/demo/touchSwipe-gallery-demo.html.
For the Swipe, I use the wonderful JQuery Plugin TouchSwipe http://labs.rampinteractive.co.uk/touchSwipe/demos/, but for the image sliding I would use the Adobe Edge Animate Timeline.
I know that I can use the Swipe events in Edge Animate to make start or reverse the timeline with pictures, but I would also make working an intermediate "dragging".
My problem, in fact, is: how can I make that - if I've only begun to swipe and I move the finger to left or right without releasing it - my timeline "drag" (or scrubs) frame by frame - like in the example above - until I release the finger?
Many thanks in advance!
Davide

Hi Elaine!
First, thanks for your prompt answer!
I read the link you gave me: in fact, I was aware - also thanks to Old Tim's posts - about how to create a "scrubber" in Edge Animate, starting from formulas like:
Translation = (positionOfScrubber/WidthOfScrubbing)*timeline;
My problem now is - I fear - more subtle: I can swipe left-right a set of pictures, I can "scrub" a timeline (using for example JqueryUI for the dragging), but I don't know how to put together the swiping and the dragging.
I would that - like in the example from my first post - if, e.g., I completed the swipe left, my timeline would play the animation that shows the pic moving to the left but, if I didn't complete the swiping and I begun dragging to the left, the animation would move with my dragging-finger (the "scrubbing")...
I know is very subtle, but it's how the gallery scrollers works on web and app in mobile devices...
Many thanks for your attention!
Davide

How can I create an image gallery with "next" buttons?

So I am almost done with my portfolio site (YES!)..now I just need the actual content (the images). My site is written in AS3.
I've watched many tutorials on how to create an image gallery (auto scrolling ones, scrolling ones that require mouse hover, etc etc), but those aren't what I am looking for.
I want a gallery that looks exactly like this one here:
http://jalbum.net/res/help/integrating-tutorial.html
I have a lot of work to display in my porfolio so there must be arrows at the end of the thumbnails so I can add more stuff. So I am just stumped on how to make the image gallery work with the ability to scroll for more photos with the click of the arrows.
Any ideas? Thank you.

Watching tutorials and learning from them are two different things. If you have learned from them you should be able to use what you have learned to devise a gallery such as the one you link to. If you have learned from them and cannot use what you learned, then you probably need to find/learn more.
If you study the design you linked you should be able to reason out what elements you need to devise... it is not overly complicated.
For the large picture you could have a Loader into which you load whatever image is selected from the thumnails. To get a brief transition you could just set the alpha of the Loader to 0 when an image change is occuring and gradually fade it in after the image has loaded.
The greatest challenge you are likely to face is in getting the thumbnails to advance back and forth depending on which is selected. All of the thumbs would be placed in a container (movieclip or sprite) and that would be masked so that only a portion of them is visible.
All thumbs that are not selected have their alpha property set to some value less than 1. Selecting one calls for the file it associates with to be loaded into the Loader. If the choice happens to lie off screen, then you need to move the movieclip that contains all of the thumbs some set value in the right (+x) or left (-x) direction.
If you want the thumbnails to wrap infinitely then when one leave the thumbnails area for movement in a direction, you need to take that thumb and relocate it to the other end of the thumbs in the container.

Scrolling image gallery problems

I am creating a scrolling image gallery using thumbnails. I have 36 thumbnails that are 100 x 100 px. I cannot figure out the x y coordinates to line up the images correctly. They are overlapping. I've put in the first x coordinate at 0 and the first image goes to the left, and that is fine, it is when I click the last image to put in a number, which I thought would be 36 x 100, they do not line up, they over lap. Does anyone have a clue how to fix this? I am working on this site for a very pushy client who wants it done NOW...Thanks,

If you crerate a Sprite or Movieclip 3600 x 100 you can place then one after another on that container then you only have 1 object to place and scroll.

Creating an image of a GUI

Hi!
Just had a quick question. Does anyone know how to create an image as a gif or jpeg of a GUI in a program. I want to capture the image to use in a Powerpoint presentation, but have now idea if it is possible to create an image of the graphic user interface.
Thanks in advance,
chet

if you think of their name then post it on here. i'll
keep a watch on this topic. incidentally, i'm sorry
all you can think about is cream cheese as i hate the
stuff.Creamcheese is a piece of Nirvana, especially when sitting under a fat slab of lox and on top of a nice onion bagel.
http://creamtec.com
The product is WebCream
most programmers i know, personally, tend to be
creatures of least resistance so i have the habit of
finding the quickest solution possible. you seem to
be a creature of most fun. i really like your harness
screen capture idea and i think i might write one just
for fun.A creature of fun, yes, but also of practicality. Many years ago I did this type of harness for DOS programming under Turbo Pascal. It was a test suite. The tester would run through the program, and when they saw an error on the page they'd hit a hot key. The harness would come to life, snap the image on the screen, ask for information about the error (change/error, category of error, description, etc), and log it out to file. The file was then sent to the developer who could then use the complementary app to read the file and scroll through the issues/errors at leisure, or just print the entire report. Back the file would go again for the tester to sign off on.
now that i think about it.. indeed, it wouldn't be bad to recreate this for apps today. JUnit only does so much on the "I know this to be right" arena, and doesn't allow for human understanding of "what's right".

Dreamweaver CS3- scrolling image marquee

Hi,
I purchased Adobe Creative Suite 3. I would like to learn how to create animated images. Is this something that Dreamweaver can do or would I need to use another program within the Suite. I am new to the Suite.
How can I create a scrolling marquee of images. I would like these images to scroll left to right horizontally across my home page. Any suggestions?
Thanks.

Dreamweaver is not an image editor. It's an HTML authoring system. For
animated images (depending on what you mean by "animated", and what kind of
images they are), you would need to use either Flash, or an animated GIF, or
some javascript function like JQuery, or other third-party sources provide.
> How can I create a scrolling marquee of images. I would like these images
> to scroll left to right horizontally across my home page. Any suggestions?
You can certainly *do* this in DW, but DW doesn't provide an 'easy button'
approach to it. You would have to either find, and then integrate the
required functions in your page using DW, or find a suitable DW extension
for it. Of course, you could always make a post over on the main
Dreamweaver forum to get a good answer for this, but in my opinion, the best
you can do for this kind of thing would be found here (look at their
slideshow extensions) -
http://www.projectseven.com/
Murray

Which is the best app to create cartoon images on that i can move around to other apps and animate to create cartoons

which is the best app to create cartoon images on that I can move around to other apps and animate. I want to create the image only, no background or anything

Hi Susan,
Kindly check out Flash pro CC
For more details: Explore Adobe desktop apps | Adobe Creative Cloud
Thanks,
Atul Saini

How do I Create interactive images to be used in another website?

Our office is contracted with a simple website company, so from the begining the framework is there. I want to add an interactive map that has each county hyperlinked to information about that area. I was told that Dreamweaver is the program I would need in order to create it.
So, I have the program now but every tutorial I read is about making your own website in dreamweaver and I can't find anything about how to create the image to upload into a different website.
Anyone know how to do this????
Thank you!

This helps, thanks. I have the content on the web page (where the hyperlinks will attach to), I have the image of the map, and I am making the shapes for the hotspots, just not how to get it all to link up.
Also, when I saved a trial (just to make sure it would all work) it doesn't successfully upload as an image onto the website, just a little box with a red X. Any more thoughts anyone?

Class casting, creating an image and decompiling...

Hi, I've got a couple of questions:
1)
How can I fully decompile classes, so with the implementation of the methods? Is it always possible to fully decompile a class file? When is it and when not?
2)
I aks this questions before, but I still haven't got it working, so sorry, but I ask it again :) :
I want to create my own class, for example cMyClass which extends the java.awt.Image class, which has abstract methods. How do these methods(for example getGraphics etc) have to be implemented?
3)
I can't cast a Image to cMyClass... why not?
Someone told me he did the following:
Canvas c = new Canvas()
cMyClass oImage = (cMyClass) c.createImage (100, 100);
and that this worked... I tried to do this too, and it seemed to work, but it actually didn't!!
I found out that c.createImage returns a null reference!!! That's why Java was able to cast it to my own cMyClass (not a problem to cast a null to something else), but when I created a Image (by doing a lot of unnessacary difficult stuff), and then tried to cast this Image to cMyClass it throw a ClassCastException or something like that...
How can I cast the java.awt.Image class to my class anyway?
3)
Why can't you create a image like i've done above or even like below:
Canvas c = new Canvas()
Image oImage = c.createImage (100, 100);
Why does this return a null reference?
Isn't there a better way to create an image?
4)
The getWidth and getHeight need a I thought observer...? Why is this? I just want the width and height and don't have an observer or something like that. Is there a way around this?
I tried getWidth(null) but this returns -1
Please help! :)

Hi, I've got a couple of questions:
1)
How can I fully decompile classes, so with the
implementation of the methods? Is it always possible
to fully decompile a class file? When is it and when
not?You can always get a dump of the bytecode with 'javap -c'. If you don't want to figure things out yourself, try searching google for a class file decompiler, possibly a de-obfuscator.
De-compilation is completely possible if the original author wanted that, by including debugging information. Depending on the degree of such information and the amount of code obfuscation, the decompiled code may lack variable names, line numbers, field and method names, class names, and even code structure. Names and line numbers are usually not re-creatable automatically, since the information is simply lost, but you can replace them with your own strings when analyzing an unknown class file (using the correct tools). Re-creating the original code structure may work in some cases, but to me the general case looks rather close to the halt problem (i.e. not solvable).
Use a de-obfuscator, hope you've got good luck, and analyze the bytecode manually if that doesn't work.
2)
I aks this questions before, but I still haven't got
it working, so sorry, but I ask it again :) :
I want to create my own class, for example cMyClass
which extends the java.awt.Image class, which has
abstract methods. How do these methods(for example
getGraphics etc) have to be implemented?I don't really understand the problem. 'abstract' means on the language level that your subclass must provide an implementation, i.e. a method body. What that method is expected to do is explained in the javadocs for Image. But in fact you're free to do anything. You could play a sound in the getWidth() method (replace with any method name if you want). Just consider the fact that a lot of code calls getWidth in the hope of getting the width of the image, not playing a sound. So much about the language level.
On a higher level, a subclass of Image should implement a certain way to describe an image. AFAIK this means that your code must know the size of the image and know how to produce the pixels of the image. I can't tell you in general how you must do this, because it depends on your special case. This boils down to the question, why do you want to write a subclass of 'Image'? What new way of describing and image have you come up with?
3)
I can't cast a Image to cMyClass... why not?Simple, and that's certainly not an ALT. Because that specific Image is not a cMyClass. It's probably a BufferedImage or similar that was produced by AWT.
Please read the specs carefully what casting is about.
Someone told me he did the following:
Canvas c = new Canvas()
cMyClass oImage = (cMyClass) c.createImage (100,
100);
and that this worked... I tried to do this too, and it
seemed to work, but it actually didn't!!
I found out that c.createImage returns a null
reference!!! That's why Java was able to cast it to my
own cMyClass (not a problem to cast a null to
something else), but when I created a Image (by doing
a lot of unnessacary difficult stuff), and then tried
to cast this Image to cMyClass it throw a
ClassCastException or something like that...
How can I cast the java.awt.Image class to my class
anyway?You can't, and if you understood casting then you'd understand that it wouldn't make sense.
3, 4(don't know)
Maybe stupid question, but for example the BufferedImage, is this
completly written in Java?
How is the link made between the OS+hardware and the Java code? I
mean, displaying images etc. is very platform dependend not?Look for JNI (Java Native Interface). It's a way to link native (e.g. C) code with Java code.

Unable to create Disc Image from DVD

I get the following error when trying to make a copy of a family wedding DVD. I'm using Disc Utility and creating the image as a DVD/CD master (.cdr) file. It gets to about 3/4 of the way and then gives the following error.
The internal drive is a PIONEER DVD-RW DVR-K05
Sep 10 22:13:24: Disk Utility started.
Creating Image “Wedding of xxx & xxx.cdr”
Reading VOLUME_IDENTIFIER (Apple_UDF : 0)...
Unable to create “Wedding of Sarah & Federico.cdr” - Input/output error.
I've tried twice now and the same error. Looks like I might have to use Toast/Popcorn etc?
Thanks,
Darren
iMac G5 2.1GHz 1Gb RAM 260Gb HDD Mac OS X (10.4.7)

I do not know what that error means. However, if you open up the Disk Utility & go into it's Help Menu & in the search field type duplicating a CD or DVD. There you will find detailed instructions on how to create a disc image from a DVD.
Good possibility your answer may be found there and/or there may have been something you missed in creating a disc image.
Good luck.

Problem in creating 1 image using differnt images

Dear Fellows I want to create an image by using different images in byte array format. Images may be transparent or normal images. I want final result in byte array. I am using the following technique which is working fine but the problem with this technique is that it takes too much time to create an image. This is because I am using MediaTraker. If I delete the code of MediaTracker then program have undeterministic behavior i.e, sometimes it create the final image properly and sometimes nothing is displayed in final image.
I need some help from you. If anyone of you know the technique to draw image using different images without using mediaTracker kindly let me know.
Early replies will be appreciated
// here is the sample code which i m using for creating image
byte[] backgroundImage= // read 800 X 600 image from disk and convert it in to byte array
byte[] image1 = // read 200 X 200 image from disk and convert it in to byte array
byte[] transparentImage // read 300 X 300 transparent image from disk and convert it in to byte array
Image img=null;
Frame frame =new Frame();
frame.addNotify();
//creating BufferedImage object to store Final image
BufferedImage requiredImage= new BufferedImage(800,600,BufferedImage.SCALE_SMOOTH);
//get Graphics of BufferedImage created above
Graphics2D g=(Graphics2D) requiredImage.getGraphics();
///// begin draw back ground image
img=Toolkit.getDefaultToolkit().createImage(backgroundImage);
try
MediaTracker mt = new MediaTracker(frame);
mt.addImage(img, 0); // adds image with ID 0
mt.waitForID(0);
}catch(Exception myex)
myex.printStackTrace();
//draw background starting from x=0, y=0 with 800 X 600 dimentions
g.drawImage(img,0,0,800,600,null);
////////// end draw background image
////////// begin draw image1
img=Toolkit.getDefaultToolkit().createImage(image1);
try
MediaTracker mt = new MediaTracker(frame);
mt.addImage(img, 0); // adds image with ID 0
mt.waitForID(0);
}catch(Exception myex)
myex.printStackTrace();
//draw image1 starting from x=10, y=10 with 200 X 200 dimentions
g.drawImage(img,10,10,200,200,null);
//////////// end draw image1
//////begin transparentImage
img=Toolkit.getDefaultToolkit().createImage(backData);
try
MediaTracker mt = new MediaTracker(frame);
mt.addImage(img, 0); // adds image with ID 0
mt.waitForID(0);
}catch(Exception myex)
myex.printStackTrace();
//draw transparentImage starting from x=400, y=0 with 300 X 300 dimentions
g.drawImage(img,400,0,300,300,null);
///end draw transparent image
byte []finalResult = //convert requiredImage into byte array;
you can mail me the solution on my email address [email protected]
thanks with best regards
and waiting for someone to reply
kamran zameer

is there anyone on this forum to help me??????
regards,
kamran zameer

Is there a way to create an image of a CC installer that way I can install without internet?

I work for a college that has a department of over 100 mac computers currently runing 10.6 and above. I am the IT here and am in charge of installing all programs the students use, so ease of installation helps. I know I can install using an internet connection and it seems pretty simple, my issue is that if for some reason I dont have internet connection in the department I wouldnt be able to install the programs. What I want to know is if I can somehow create an image for the CC softwares, such as Photoshop CC, that way I can create more images of that installer, put them onto external hardrives and install that way without using internet. hope thats enough information, thanks for the help.

Direct Download Links for Adobe Software
For proper deployment, sign up with the dev center/ enterprise deployment.
Mylenium

Creating an image from a Mac and restoring it in another Mac

Hi,
I've spent a couple of hours trying to make a copy of one of my macminis, trying to copy it in another macmini to have the SAME machine "duplicated".
I've read some tutorials online, but something is going wrong....
First of all, I went to my "master" macmini, DiskUtility, create new image from folder, select my macintosh HD and I created the image of the whole HD.
Almost a hour after, the image was created.
Then I moved the .dmg to a USB drive, and I connected the USB pen to the machine that I want to be a "clone" of the master. There, I opened Disk Utility, Restore, I selected the Source image from my USB, but I can't selected (=drag) the Macintosh HD into the "destination" field...
What I'm doing wrong?
Thanks, any help is appreciated :))

Hi sr.richie;
If you are booted from Macintosh HD then the system will not allow this cloning operation to take place. You must boot from another disk in order to do that.
Allan

Is there any way to create this image in photoshop?

Is there any way to create this image in photoshop? ,Any help would be appreciated?

What JJMack said. An example I pulled in less than 5 minutes:
All I did was inserted a text layer with that same inside color and a stroke layer style with that same outside color (about 3 or 4 pixels; outside position). Font used was Calibri Regular.

Creating scrolling image banners

Similar Messages

Maybe you are looking for